[PATCH AUTOSEL 5.6 05/38] hwmon: (drivetemp) Use drivetemp's true module name in Kconfig section

[PATCH AUTOSEL 5.6 05/38] hwmon: (drivetemp) Use drivetemp's true module name in Kconfig section

[Sasha Levin]

From: Ann T Ropea <bedhanger@gmx.de>

[ Upstream commit 6bdf8f3efe867c5893e27431a555e41f54ed7f9a ]

The addition of the support for reading the temperature of ATA drives as
per commit 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives
with temperature sensors") lists in the respective Kconfig section the
name of the module to be optionally built as "satatemp".

However, building the kernel modules with "CONFIG_SENSORS_DRIVETEMP=m",
does not generate a file named "satatemp.ko".

Instead, the rest of the original commit uses the term "drivetemp" and
a file named "drivetemp.ko" ends up in the kernel's modules directory.
This file has the right ingredients:

	$ strings /path/to/drivetemp.ko | grep ^description
	description=Hard drive temperature monitor

and modprobing it produces the expected result:

	# drivetemp is not loaded
	$ sensors -u drivetemp-scsi-4-0
	Specified sensor(s) not found!
	$ sudo modprobe drivetemp
	$ sensors -u drivetemp-scsi-4-0
	drivetemp-scsi-4-0
	Adapter: SCSI adapter
	temp1:
	  temp1_input: 35.000
	  temp1_max: 60.000
	  temp1_min: 0.000
	  temp1_crit: 70.000
	  temp1_lcrit: -40.000
	  temp1_lowest: 20.000
	  temp1_highest: 36.000

Fix Kconfig by referring to the true name of the module.

Fixes: 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors")
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Link: https://lore.kernel.org/r/20200406235521.185309-1-bedhanger@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 47ac20aee06fc..4c1c61aa4b82e 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -403,7 +403,7 @@ config SENSORS_DRIVETEMP
 	  hard disk drives.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called satatemp.
+	  will be called drivetemp.
 
 config SENSORS_DS620
 	tristate "Dallas Semiconductor DS620"
-- 
2.20.1

[PATCH AUTOSEL 5.6 06/38] hwmon: (drivetemp) Return -ENODATA for invalid temperatures

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit ed08ebb7124e90a99420bb913d602907d377d03d ]

Holger Hoffstätte observed that Samsung 850 Pro may return invalid
temperatures for a short period of time after resume. Return -ENODATA
to userspace if this is observed.

Fixes:  5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Cc: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/drivetemp.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/hwmon/drivetemp.c b/drivers/hwmon/drivetemp.c
index 370d0c74eb012..9179460c2d9d5 100644
--- a/drivers/hwmon/drivetemp.c
+++ b/drivers/hwmon/drivetemp.c
@@ -264,12 +264,18 @@ static int drivetemp_get_scttemp(struct drivetemp_data *st, u32 attr, long *val)
 		return err;
 	switch (attr) {
 	case hwmon_temp_input:
+		if (!temp_is_valid(buf[SCT_STATUS_TEMP]))
+			return -ENODATA;
 		*val = temp_from_sct(buf[SCT_STATUS_TEMP]);
 		break;
 	case hwmon_temp_lowest:
+		if (!temp_is_valid(buf[SCT_STATUS_TEMP_LOWEST]))
+			return -ENODATA;
 		*val = temp_from_sct(buf[SCT_STATUS_TEMP_LOWEST]);
 		break;
 	case hwmon_temp_highest:
+		if (!temp_is_valid(buf[SCT_STATUS_TEMP_HIGHEST]))
+			return -ENODATA;
 		*val = temp_from_sct(buf[SCT_STATUS_TEMP_HIGHEST]);
 		break;
 	default:
-- 
2.20.1

[PATCH AUTOSEL 5.6 38/38] hwmon: (jc42) Fix name to have no illegal characters

[Sasha Levin]

From: Sascha Hauer <s.hauer@pengutronix.de>

[ Upstream commit c843b382e61b5f28a3d917712c69a344f632387c ]

The jc42 driver passes I2C client's name as hwmon device name. In case
of device tree probed devices this ends up being part of the compatible
string, "jc-42.4-temp". This name contains hyphens and the hwmon core
doesn't like this:

jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix

This changes the name to "jc42" which doesn't have any illegal
characters.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20200417092853.31206-1-s.hauer@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/jc42.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index f2d81b0558e56..e3f1ebee71306 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -506,7 +506,7 @@ static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	}
 	data->config = config;
 
-	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
 							 data, &jc42_chip_info,
 							 NULL);
 	return PTR_ERR_OR_ZERO(hwmon_dev);
-- 
2.20.1