Linux-Hwmon Archive on
 help / color / Atom feed
* [PATCH v3] dt-bindings: hwmon: adm1272: add analog,temp1-enable binding
@ 2020-07-21  3:48 Chu Lin
  0 siblings, 0 replies; only message in thread
From: Chu Lin @ 2020-07-21  3:48 UTC (permalink / raw)
  To: linux, robh+dt, jdelvare
  Cc: belgaied, jasonling, linchuyuan, linux-hwmon, linux-kernel, zhongqil

	adm1272 and adm1278 supports temperature sampling. The
current way of enabling it requires the user manually unbind the device
from the driver, flip the temperature sampling control bit and then bind
the device back to the driver. It would be nice if we can control this in a
better way by reading the dt.

	Introducing device tree binding analog,temp1-enable. If the
flag is set, flip the temp1_en control bit on probing.

make dt_binding_check

Signed-off-by: Chu Lin <>
ChangeLog v1->v2:
 - Rename adm1272-adm1278-temp1-en to analog-temperature1-enable

ChangeLog v2->v3:
 - Rename analog-temperature1-enable analog,temp1-enable

 Documentation/devicetree/bindings/hwmon/adm1275.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
index 1ecd03f3da4d..22ca5a321d5c 100644
--- a/Documentation/devicetree/bindings/hwmon/adm1275.txt
+++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt
@@ -15,6 +15,8 @@ Optional properties:
 - shunt-resistor-micro-ohms
 	Shunt resistor value in micro-Ohm
+- analog,temp1-enable
+	Enable temperature sampling. This is supported on adm1272 and adm1278
@@ -22,4 +24,5 @@ adm1272@10 {
 	compatible = "adi,adm1272";
 	reg = <0x10>;
 	shunt-resistor-micro-ohms = <500>;
+	analog,temp1-enable;

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-21  3:48 [PATCH v3] dt-bindings: hwmon: adm1272: add analog,temp1-enable binding Chu Lin

Linux-Hwmon Archive on

Archives are clonable:
	git clone --mirror linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ \
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone