linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robert Marko <robert.marko@sartura.hr>
To: lee.jones@linaro.org, robh+dt@kernel.org,
	linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	jdelvare@suse.com, linux@roeck-us.net,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-hwmon@vger.kernel.org
Cc: luka.perkov@sartura.hr, jmp@epiphyte.org, pmenzel@molgen.mpg.de,
	buczek@molgen.mpg.de, Robert Marko <robert.marko@sartura.hr>
Subject: [PATCH 1/6] mfd: Add Delta TN48M CPLD driver
Date: Fri, 30 Apr 2021 14:35:06 +0200	[thread overview]
Message-ID: <20210430123511.116057-1-robert.marko@sartura.hr> (raw)

Delta TN48M switches have a Lattice CPLD that serves
multiple purposes including being a GPIO expander.
So lets add the MFD core driver for it.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
 drivers/mfd/Kconfig       |  13 +++
 drivers/mfd/Makefile      |   1 +
 drivers/mfd/tn48m-cpld.c  | 181 ++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/tn48m.h |  30 +++++++
 4 files changed, 225 insertions(+)
 create mode 100644 drivers/mfd/tn48m-cpld.c
 create mode 100644 include/linux/mfd/tn48m.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b74efa469e90..809041f98d71 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -297,6 +297,19 @@ config MFD_ASIC3
 	  This driver supports the ASIC3 multifunction chip found on many
 	  PDAs (mainly iPAQ and HTC based ones)
 
+config MFD_TN48M_CPLD
+	tristate "Delta Networks TN48M switch CPLD driver"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Select this option to enable support for Delta Networks TN48M switch
+	  CPLD. It consists of GPIO and hwmon drivers.
+	  CPLD provides GPIOS-s for the SFP slots as well as power supply
+	  related information.
+	  Driver provides debugfs information about the board model as
+	  well as hardware and CPLD revision information.
+
 config PMIC_DA903X
 	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 	depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 834f5463af28..974663341f08 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_MFD_TI_LP87565)	+= lp87565.o
 obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
 obj-$(CONFIG_MFD_TI_AM335X_TSCADC)	+= ti_am335x_tscadc.o
+obj-$(CONFIG_MFD_TN48M_CPLD)	+= tn48m-cpld.o
 
 obj-$(CONFIG_MFD_STA2X11)	+= sta2x11-mfd.o
 obj-$(CONFIG_MFD_STMPE)		+= stmpe.o
diff --git a/drivers/mfd/tn48m-cpld.c b/drivers/mfd/tn48m-cpld.c
new file mode 100644
index 000000000000..b84510fb630a
--- /dev/null
+++ b/drivers/mfd/tn48m-cpld.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Delta TN48M CPLD parent driver
+ *
+ * Copyright 2020 Sartura Ltd
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tn48m.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+static const struct mfd_cell tn48m_cell[] = {};
+
+static const struct regmap_config tn48m_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x40,
+};
+
+static int hardware_version_show(struct seq_file *s, void *data)
+{
+	struct tn48m_data *priv = s->private;
+	unsigned int regval;
+	char *buf;
+
+	regmap_read(priv->regmap, HARDWARE_VERSION_ID, &regval);
+
+	switch (FIELD_GET(HARDWARE_VERSION_MASK, regval)) {
+	case HARDWARE_VERSION_EVT1:
+		buf = "EVT1";
+		break;
+	case HARDWARE_VERSION_EVT2:
+		buf = "EVT2";
+		break;
+	case HARDWARE_VERSION_DVT:
+		buf = "DVT";
+		break;
+	case HARDWARE_VERSION_PVT:
+		buf = "PVT";
+		break;
+	default:
+		buf = "Unknown";
+		break;
+	}
+
+	seq_printf(s, "%s\n", buf);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(hardware_version);
+
+static int board_id_show(struct seq_file *s, void *data)
+{
+	struct tn48m_data *priv = s->private;
+	unsigned int regval;
+	char *buf;
+
+	regmap_read(priv->regmap, BOARD_ID, &regval);
+
+	switch (regval) {
+	case BOARD_ID_TN48M:
+		buf = "TN48M";
+		break;
+	case BOARD_ID_TN48M_P:
+		buf = "TN48-P";
+		break;
+	default:
+		buf = "Unknown";
+		break;
+	}
+
+	seq_printf(s, "%s\n", buf);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(board_id);
+
+static int code_version_show(struct seq_file *s, void *data)
+{
+	struct tn48m_data *priv = s->private;
+	unsigned int regval;
+
+	regmap_read(priv->regmap, CPLD_CODE_VERSION, &regval);
+
+	seq_printf(s, "%d\n", regval);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(code_version);
+
+static void tn48m_init_debugfs(struct tn48m_data *data)
+{
+	data->debugfs_dir = debugfs_create_dir(data->client->name, NULL);
+
+	debugfs_create_file("hardware_version",
+			    0400,
+			    data->debugfs_dir,
+			    data,
+			    &hardware_version_fops);
+
+	debugfs_create_file("board_id",
+			    0400,
+			    data->debugfs_dir,
+			    data,
+			    &board_id_fops);
+
+	debugfs_create_file("code_version",
+			    0400,
+			    data->debugfs_dir,
+			    data,
+			    &code_version_fops);
+}
+
+static int tn48m_probe(struct i2c_client *client)
+{
+	struct tn48m_data *data;
+	int ret;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	data->dev = &client->dev;
+	i2c_set_clientdata(client, data);
+
+	data->regmap = devm_regmap_init_i2c(client, &tn48m_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(data->dev, "Failed to allocate regmap\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	ret = devm_mfd_add_devices(data->dev, PLATFORM_DEVID_AUTO, tn48m_cell,
+				   ARRAY_SIZE(tn48m_cell), NULL, 0, NULL);
+	if (ret)
+		dev_err(data->dev, "Failed to register sub-devices %d\n", ret);
+
+	tn48m_init_debugfs(data);
+
+	return ret;
+}
+
+static int tn48m_remove(struct i2c_client *client)
+{
+	struct tn48m_data *data = i2c_get_clientdata(client);
+
+	debugfs_remove_recursive(data->debugfs_dir);
+
+	return 0;
+}
+
+static const struct of_device_id tn48m_of_match[] = {
+	{ .compatible = "delta,tn48m-cpld"},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tn48m_of_match);
+
+static struct i2c_driver tn48m_driver = {
+	.driver = {
+		.name = "tn48m-cpld",
+		.of_match_table = tn48m_of_match,
+	},
+	.probe_new	= tn48m_probe,
+	.remove		= tn48m_remove,
+};
+module_i2c_driver(tn48m_driver);
+
+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
+MODULE_DESCRIPTION("Delta TN48M CPLD parent driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/tn48m.h b/include/linux/mfd/tn48m.h
new file mode 100644
index 000000000000..551c550efa54
--- /dev/null
+++ b/include/linux/mfd/tn48m.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2020 Sartura Ltd
+ */
+
+#ifndef __TN48M_H__
+#define __TN48M_H__
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#define HARDWARE_VERSION_ID	0x0
+#define HARDWARE_VERSION_MASK	GENMASK(3, 0)
+#define HARDWARE_VERSION_EVT1	0
+#define HARDWARE_VERSION_EVT2	1
+#define HARDWARE_VERSION_DVT	2
+#define HARDWARE_VERSION_PVT	3
+#define BOARD_ID		0x1
+#define BOARD_ID_TN48M		0xa
+#define BOARD_ID_TN48M_P	0xb
+#define CPLD_CODE_VERSION	0x2
+
+struct tn48m_data {
+	struct device *dev;
+	struct regmap *regmap;
+	struct i2c_client *client;
+	struct dentry *debugfs_dir;
+};
+
+#endif
-- 
2.31.1


             reply	other threads:[~2021-04-30 12:35 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-30 12:35 Robert Marko [this message]
2021-04-30 12:35 ` [PATCH 2/6] dt-bindings: gpio: Add Delta TN48M CPLD GPIO bindings Robert Marko
2021-05-06 13:57   ` Rob Herring
2021-04-30 12:35 ` [PATCH 3/6] gpio: Add Delta TN48M CPLD GPIO driver Robert Marko
2021-05-06 14:00   ` Rob Herring
2021-05-06 16:40     ` Michael Walle
2021-05-06 17:21       ` Luka Perkov
2021-05-21 13:22       ` Robert Marko
2021-05-06 16:38   ` Michael Walle
2021-05-21 13:21     ` Robert Marko
2021-04-30 12:35 ` [PATCH 4/6] hwmon: Add Delta TN48M CPLD HWMON driver Robert Marko
2021-04-30 13:12   ` Guenter Roeck
2021-05-19 12:01     ` Robert Marko
2021-05-19 13:40       ` Guenter Roeck
2021-04-30 12:35 ` [PATCH 5/6] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings Robert Marko
2021-05-06 14:01   ` Rob Herring
2021-04-30 12:35 ` [PATCH 6/6] MAINTAINERS: Add Delta Networks TN48M CPLD drivers Robert Marko
2021-05-06 16:34 ` [PATCH 1/6] mfd: Add Delta TN48M CPLD driver Michael Walle
2021-05-19 11:53   ` Robert Marko
2021-05-19 19:42     ` Michael Walle
2021-05-20  6:49       ` Lee Jones
2021-05-21  8:19         ` Robert Marko
2021-05-21  9:03           ` Lee Jones
2021-05-21  9:06             ` Robert Marko
2021-05-06 16:50 ` kernel test robot
2021-05-19 11:11 ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210430123511.116057-1-robert.marko@sartura.hr \
    --to=robert.marko@sartura.hr \
    --cc=bgolaszewski@baylibre.com \
    --cc=buczek@molgen.mpg.de \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=jmp@epiphyte.org \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=luka.perkov@sartura.hr \
    --cc=pmenzel@molgen.mpg.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).