linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robert Marko <robert.marko@sartura.hr>
To: lee.jones@linaro.org, robh+dt@kernel.org,
	linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	jdelvare@suse.com, linux@roeck-us.net,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-hwmon@vger.kernel.org
Cc: luka.perkov@sartura.hr, jmp@epiphyte.org, pmenzel@molgen.mpg.de,
	buczek@molgen.mpg.de, Robert Marko <robert.marko@sartura.hr>
Subject: [PATCH 3/6] gpio: Add Delta TN48M CPLD GPIO driver
Date: Fri, 30 Apr 2021 14:35:08 +0200	[thread overview]
Message-ID: <20210430123511.116057-3-robert.marko@sartura.hr> (raw)
In-Reply-To: <20210430123511.116057-1-robert.marko@sartura.hr>

Delta TN48M CPLD is used as a GPIO expander for the SFP GPIOs.

It is a mix of input only and output only pins.

Since there is no logical GPIO numbering arbitrary one is used
along dt-bindings to make it humanly readable.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
 drivers/gpio/Kconfig      |  12 +++
 drivers/gpio/Makefile     |   1 +
 drivers/gpio/gpio-tn48m.c | 191 ++++++++++++++++++++++++++++++++++++++
 drivers/mfd/tn48m-cpld.c  |   6 +-
 include/linux/mfd/tn48m.h |   3 +
 5 files changed, 212 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpio/gpio-tn48m.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e3607ec4c2e8..e17d4416786a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1310,6 +1310,18 @@ config GPIO_TIMBERDALE
 	help
 	Add support for the GPIO IP in the timberdale FPGA.
 
+config GPIO_TN48M_CPLD
+	tristate "Delta Networks TN48M switch CPLD GPIO driver"
+	depends on MFD_TN48M_CPLD
+	depends on OF_GPIO
+	help
+	  This enables support for the GPIOs found on the Delta
+	  Networks TN48M switch CPLD.
+	  They are used for inputs and outputs on the SFP slots.
+
+	  This driver can also be built as a module. If so, the
+	  module will be called gpio-tn48m.
+
 config GPIO_TPS65086
 	tristate "TI TPS65086 GPO"
 	depends on MFD_TPS65086
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c58a90a3c3b1..271fb806475e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -145,6 +145,7 @@ obj-$(CONFIG_GPIO_TEGRA186)		+= gpio-tegra186.o
 obj-$(CONFIG_GPIO_TEGRA)		+= gpio-tegra.o
 obj-$(CONFIG_GPIO_THUNDERX)		+= gpio-thunderx.o
 obj-$(CONFIG_GPIO_TIMBERDALE)		+= gpio-timberdale.o
+obj-$(CONFIG_GPIO_TN48M_CPLD)		+= gpio-tn48m.o
 obj-$(CONFIG_GPIO_TPIC2810)		+= gpio-tpic2810.o
 obj-$(CONFIG_GPIO_TPS65086)		+= gpio-tps65086.o
 obj-$(CONFIG_GPIO_TPS65218)		+= gpio-tps65218.o
diff --git a/drivers/gpio/gpio-tn48m.c b/drivers/gpio/gpio-tn48m.c
new file mode 100644
index 000000000000..4e859e4c339c
--- /dev/null
+++ b/drivers/gpio/gpio-tn48m.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Delta TN48M CPLD GPIO driver
+ *
+ * Copyright 2020 Sartura Ltd
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tn48m.h>
+#include <dt-bindings/gpio/tn48m-gpio.h>
+
+struct tn48m_gpio {
+	struct gpio_chip chip;
+	struct tn48m_data *data;
+};
+
+static int tn48m_gpio_get_direction(struct gpio_chip *chip,
+				    unsigned int offset)
+{
+	switch (offset) {
+	case SFP_TX_DISABLE_52:
+	case SFP_TX_DISABLE_51:
+	case SFP_TX_DISABLE_50:
+	case SFP_TX_DISABLE_49:
+		return GPIO_LINE_DIRECTION_OUT;
+	case SFP_PRESENT_52:
+	case SFP_PRESENT_51:
+	case SFP_PRESENT_50:
+	case SFP_PRESENT_49:
+	case SFP_LOS_52:
+	case SFP_LOS_51:
+	case SFP_LOS_50:
+	case SFP_LOS_49:
+		return GPIO_LINE_DIRECTION_IN;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tn48m_gpio_get_reg(unsigned int offset)
+{
+	switch (offset) {
+	case SFP_TX_DISABLE_52:
+	case SFP_TX_DISABLE_51:
+	case SFP_TX_DISABLE_50:
+	case SFP_TX_DISABLE_49:
+		return SFP_TX_DISABLE;
+	case SFP_PRESENT_52:
+	case SFP_PRESENT_51:
+	case SFP_PRESENT_50:
+	case SFP_PRESENT_49:
+		return SFP_PRESENT;
+	case SFP_LOS_52:
+	case SFP_LOS_51:
+	case SFP_LOS_50:
+	case SFP_LOS_49:
+		return SFP_LOS;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tn48m_gpio_get_mask(unsigned int offset)
+{
+	switch (offset) {
+	case SFP_TX_DISABLE_52:
+	case SFP_PRESENT_52:
+	case SFP_LOS_52:
+		return BIT(3);
+	case SFP_TX_DISABLE_51:
+	case SFP_PRESENT_51:
+	case SFP_LOS_51:
+		return BIT(2);
+	case SFP_TX_DISABLE_50:
+	case SFP_PRESENT_50:
+	case SFP_LOS_50:
+		return BIT(1);
+	case SFP_TX_DISABLE_49:
+	case SFP_PRESENT_49:
+	case SFP_LOS_49:
+		return BIT(0);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tn48m_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct tn48m_gpio *gpio = gpiochip_get_data(chip);
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(gpio->data->regmap,
+			  tn48m_gpio_get_reg(offset),
+			  &regval);
+	if (ret < 0)
+		return ret;
+
+	return regval & tn48m_gpio_get_mask(offset);
+}
+
+static void tn48m_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			   int value)
+{
+	struct tn48m_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->data->regmap,
+			   tn48m_gpio_get_reg(offset),
+			   tn48m_gpio_get_mask(offset),
+			   value ? tn48m_gpio_get_mask(offset) : 0);
+}
+
+static int tn48m_gpio_direction_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	tn48m_gpio_set(chip, offset, value);
+
+	return 0;
+}
+
+/*
+ * Required for SFP as it calls gpiod_direction_input()
+ * and if its missing TX disable GPIO will print an
+ * error and not be controlled anymore.
+ */
+static int tn48m_gpio_direction_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	return 0;
+}
+
+static const struct gpio_chip tn48m_template_chip = {
+	.label			= "tn48m-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= tn48m_gpio_get_direction,
+	.direction_output	= tn48m_gpio_direction_output,
+	.direction_input	= tn48m_gpio_direction_input,
+	.get			= tn48m_gpio_get,
+	.set			= tn48m_gpio_set,
+	.base			= -1,
+	.ngpio			= 12,
+	.can_sleep		= true,
+};
+
+static int tn48m_gpio_probe(struct platform_device *pdev)
+{
+	struct tn48m_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gpio);
+
+	gpio->data = dev_get_drvdata(pdev->dev.parent);
+	gpio->chip = tn48m_template_chip;
+	gpio->chip.parent = gpio->data->dev;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id tn48m_gpio_id_table[] = {
+	{ "delta,tn48m-gpio", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, tn48m_gpio_id_table);
+
+static struct platform_driver tn48m_gpio_driver = {
+	.driver = {
+		.name = "tn48m-gpio",
+	},
+	.probe = tn48m_gpio_probe,
+	.id_table = tn48m_gpio_id_table,
+};
+module_platform_driver(tn48m_gpio_driver);
+
+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
+MODULE_DESCRIPTION("Delta TN48M CPLD GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/tn48m-cpld.c b/drivers/mfd/tn48m-cpld.c
index b84510fb630a..f22a15ddd22d 100644
--- a/drivers/mfd/tn48m-cpld.c
+++ b/drivers/mfd/tn48m-cpld.c
@@ -17,7 +17,11 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
-static const struct mfd_cell tn48m_cell[] = {};
+static const struct mfd_cell tn48m_cell[] = {
+	{
+		.name = "delta,tn48m-gpio",
+	}
+};
 
 static const struct regmap_config tn48m_regmap_config = {
 	.reg_bits = 8,
diff --git a/include/linux/mfd/tn48m.h b/include/linux/mfd/tn48m.h
index 551c550efa54..9cc2b04c8d69 100644
--- a/include/linux/mfd/tn48m.h
+++ b/include/linux/mfd/tn48m.h
@@ -19,6 +19,9 @@
 #define BOARD_ID_TN48M		0xa
 #define BOARD_ID_TN48M_P	0xb
 #define CPLD_CODE_VERSION	0x2
+#define SFP_TX_DISABLE		0x31
+#define SFP_PRESENT		0x3a
+#define SFP_LOS			0x40
 
 struct tn48m_data {
 	struct device *dev;
-- 
2.31.1


  parent reply	other threads:[~2021-04-30 12:35 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-30 12:35 [PATCH 1/6] mfd: Add Delta TN48M CPLD driver Robert Marko
2021-04-30 12:35 ` [PATCH 2/6] dt-bindings: gpio: Add Delta TN48M CPLD GPIO bindings Robert Marko
2021-05-06 13:57   ` Rob Herring
2021-04-30 12:35 ` Robert Marko [this message]
2021-05-06 14:00   ` [PATCH 3/6] gpio: Add Delta TN48M CPLD GPIO driver Rob Herring
2021-05-06 16:40     ` Michael Walle
2021-05-06 17:21       ` Luka Perkov
2021-05-21 13:22       ` Robert Marko
2021-05-06 16:38   ` Michael Walle
2021-05-21 13:21     ` Robert Marko
2021-04-30 12:35 ` [PATCH 4/6] hwmon: Add Delta TN48M CPLD HWMON driver Robert Marko
2021-04-30 13:12   ` Guenter Roeck
2021-05-19 12:01     ` Robert Marko
2021-05-19 13:40       ` Guenter Roeck
2021-04-30 12:35 ` [PATCH 5/6] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings Robert Marko
2021-05-06 14:01   ` Rob Herring
2021-04-30 12:35 ` [PATCH 6/6] MAINTAINERS: Add Delta Networks TN48M CPLD drivers Robert Marko
2021-05-06 16:34 ` [PATCH 1/6] mfd: Add Delta TN48M CPLD driver Michael Walle
2021-05-19 11:53   ` Robert Marko
2021-05-19 19:42     ` Michael Walle
2021-05-20  6:49       ` Lee Jones
2021-05-21  8:19         ` Robert Marko
2021-05-21  9:03           ` Lee Jones
2021-05-21  9:06             ` Robert Marko
2021-05-06 16:50 ` kernel test robot
2021-05-19 11:11 ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210430123511.116057-3-robert.marko@sartura.hr \
    --to=robert.marko@sartura.hr \
    --cc=bgolaszewski@baylibre.com \
    --cc=buczek@molgen.mpg.de \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=jmp@epiphyte.org \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=luka.perkov@sartura.hr \
    --cc=pmenzel@molgen.mpg.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).