[PATCH v3 0/2] hwmon: Add max31760 fan speed controller

[PATCH v3 0/2] hwmon: Add max31760 fan speed controller

[Ibrahim Tilki]

changes in v3:
  - add regmap cache
  - remove pwm1_auto_point[1-48]_{temp,temp_hyst} attributes
  - add pwm1_auto_point_temp_hyst attribute

changes in v2:
  - remove pulse_per_rev variable in tach_to_rpm
  - remove temperature max_hyst and crit_hyst
  - strict value checking for fan_enable and pwm_enable
  - do not clamp pwm value for Look-up table
  - add sysfs_attr_init call
  - add documentation

Ibrahim Tilki (2):
  drivers: hwmon: Add max31760 fan speed controller driver
  docs: hwmon: add max31760 documentation

 Documentation/hwmon/max31760.rst |  65 ++++
 drivers/hwmon/Kconfig            |  10 +
 drivers/hwmon/Makefile           |   1 +
 drivers/hwmon/max31760.c         | 599 +++++++++++++++++++++++++++++++
 4 files changed, 675 insertions(+)
 create mode 100644 Documentation/hwmon/max31760.rst
 create mode 100644 drivers/hwmon/max31760.c

-- 
2.36.1

[PATCH v3 1/2] drivers: hwmon: Add max31760 fan speed controller driver

[Ibrahim Tilki]

MAX31760 is a precision fan speed controller with nonvolatile lookup table.
Device has one internal and one external temperature sensor support.
Controls two fans and measures their speeds.
Generates hardware alerts when programmable max and critical temperatures are exceeded.

Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Reviewed-by: Nurettin Bolucu <Nurettin.Bolucu@analog.com>
---
 drivers/hwmon/Kconfig    |  10 +
 drivers/hwmon/Makefile   |   1 +
 drivers/hwmon/max31760.c | 599 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 610 insertions(+)
 create mode 100644 drivers/hwmon/max31760.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e70d9614b..513113497 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1066,6 +1066,16 @@ config SENSORS_MAX31730
 	  This driver can also be built as a module. If so, the module
 	  will be called max31730.
 
+config SENSORS_MAX31760
+	tristate "MAX31760 fan speed controller"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Support for the Analog Devices MAX31760 Fan Speed Controller.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called max31760.
+
 config SENSORS_MAX6620
 	tristate "Maxim MAX6620 fan controller"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 007e829d1..1c0fa4dd8 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_SENSORS_MAX1668)	+= max1668.o
 obj-$(CONFIG_SENSORS_MAX197)	+= max197.o
 obj-$(CONFIG_SENSORS_MAX31722)	+= max31722.o
 obj-$(CONFIG_SENSORS_MAX31730)	+= max31730.o
+obj-$(CONFIG_SENSORS_MAX31760)  += max31760.o
 obj-$(CONFIG_SENSORS_MAX6620)	+= max6620.o
 obj-$(CONFIG_SENSORS_MAX6621)	+= max6621.o
 obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
diff --git a/drivers/hwmon/max31760.c b/drivers/hwmon/max31760.c
new file mode 100644
index 000000000..dbb99d5d9
--- /dev/null
+++ b/drivers/hwmon/max31760.c
@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/util_macros.h>
+
+#define REG_CR1		0x00
+#define CR1_HYST	BIT(5)
+#define CR1_DRV		GENMASK(4, 3)
+#define CR1_TEMP_SRC	GENMASK(1, 0)
+#define REG_CR2		0x01
+#define CR2_STBY	BIT(7)
+#define CR2_ALERTS	BIT(6)
+#define CR2_DFC		BIT(0)
+#define REG_CR3		0x02
+#define REG_PWMR	0x50
+#define REG_PWMV	0x51
+#define REG_STATUS	0x5A
+#define STATUS_ALARM_CRIT(ch)	BIT(2 + 2 * (ch))
+#define STATUS_ALARM_MAX(ch)	BIT(3 + 2 * (ch))
+#define STATUS_RDFA		BIT(6)
+
+#define REG_TACH(ch)		(0x52 + (ch) * 2)
+#define REG_TEMP_INPUT(ch)	(0x56 + (ch) * 2)
+#define REG_TEMP_MAX(ch)	(0x06 + (ch) * 2)
+#define REG_TEMP_CRIT(ch)	(0x0A + (ch) * 2)
+
+#define TEMP11_FROM_REG(reg)	((reg) / 32 * 125)
+#define TEMP11_TO_REG(val)	(DIV_ROUND_CLOSEST(clamp_val((val), -128000, \
+							     127875), 125) * 32)
+
+#define LUT_SIZE	48
+
+#define REG_LUT(index)		(0x20 + (index))
+
+struct max31760_state {
+	struct regmap *regmap;
+
+	struct lut_attribute {
+		char name[24];
+		struct sensor_device_attribute sda;
+	} lut[LUT_SIZE];
+
+	struct attribute *attrs[LUT_SIZE + 2];
+	struct attribute_group group;
+	const struct attribute_group *groups[2];
+};
+
+static bool max31760_volatile_reg(struct device *dev, unsigned int reg)
+{
+	return reg > 0x50;
+}
+
+static const struct regmap_config regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x5B,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = max31760_volatile_reg,
+};
+
+static const int max31760_pwm_freq[] = {33, 150, 1500, 25000};
+
+static int tach_to_rpm(u16 tach)
+{
+	if (tach == 0)
+		tach = 1;
+
+	return 60 * 100000 / tach / 2;
+}
+
+static int max31760_read(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long *val)
+{
+	struct max31760_state *state = dev_get_drvdata(dev);
+	unsigned int regval;
+	unsigned int reg_temp;
+	s16 temp;
+	u8 reg[2];
+	int ret;
+
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_fault:
+			ret = regmap_read(state->regmap, REG_STATUS, &regval);
+			if (ret)
+				return ret;
+
+			*val = FIELD_GET(STATUS_RDFA, regval);
+
+			return 0;
+		case hwmon_temp_max_alarm:
+			ret = regmap_read(state->regmap, REG_STATUS, &regval);
+			if (ret)
+				return ret;
+
+			if (channel)
+				*val = FIELD_GET(STATUS_ALARM_MAX(1), regval);
+			else
+				*val = FIELD_GET(STATUS_ALARM_MAX(0), regval);
+
+			return 0;
+		case hwmon_temp_crit_alarm:
+			ret = regmap_read(state->regmap, REG_STATUS, &regval);
+			if (ret)
+				return ret;
+
+			if (channel)
+				*val = FIELD_GET(STATUS_ALARM_CRIT(1), regval);
+			else
+				*val = FIELD_GET(STATUS_ALARM_CRIT(0), regval);
+
+			return 0;
+		case hwmon_temp_input:
+			reg_temp = REG_TEMP_INPUT(channel);
+			break;
+		case hwmon_temp_max:
+			reg_temp = REG_TEMP_MAX(channel);
+			break;
+		case hwmon_temp_crit:
+			reg_temp = REG_TEMP_CRIT(channel);
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+
+		ret = regmap_bulk_read(state->regmap, reg_temp, reg, 2);
+		if (ret)
+			return ret;
+
+		temp = (reg[0] << 8) | reg[1];
+
+		*val = TEMP11_FROM_REG(temp);
+
+		return 0;
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+			ret = regmap_bulk_read(state->regmap, REG_TACH(channel), reg, 2);
+			if (ret)
+				return ret;
+
+			*val = tach_to_rpm(reg[0] * 256 + reg[1]);
+
+			return 0;
+		case hwmon_fan_fault:
+			ret = regmap_read(state->regmap, REG_STATUS, &regval);
+			if (ret)
+				return ret;
+
+			if (channel)
+				*val = FIELD_GET(BIT(1), regval);
+			else
+				*val = FIELD_GET(BIT(0), regval);
+
+			return 0;
+		case hwmon_fan_enable:
+			ret = regmap_read(state->regmap, REG_CR3, &regval);
+			if (ret)
+				return ret;
+
+			if (channel)
+				*val = FIELD_GET(BIT(1), regval);
+			else
+				*val = FIELD_GET(BIT(0), regval);
+
+			return 0;
+		default:
+			return -EOPNOTSUPP;
+		}
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			ret = regmap_read(state->regmap, REG_PWMV, &regval);
+			if (ret)
+				return ret;
+
+			*val = regval;
+
+			return 0;
+		case hwmon_pwm_freq:
+			ret = regmap_read(state->regmap, REG_CR1, &regval);
+			if (ret)
+				return ret;
+
+			regval = FIELD_GET(CR1_DRV, regval);
+			if (regval >= ARRAY_SIZE(max31760_pwm_freq))
+				return -EINVAL;
+
+			*val = max31760_pwm_freq[regval];
+
+			return 0;
+		case hwmon_pwm_enable:
+			ret = regmap_read(state->regmap, REG_CR2, &regval);
+			if (ret)
+				return ret;
+
+			*val = 2 - FIELD_GET(CR2_DFC, regval);
+
+			return 0;
+		case hwmon_pwm_auto_channels_temp:
+			ret = regmap_read(state->regmap, REG_CR1, &regval);
+			if (ret)
+				return ret;
+
+			switch (FIELD_GET(CR1_TEMP_SRC, regval)) {
+			case 0:
+				*val = 2;
+				break;
+			case 1:
+				*val = 1;
+				break;
+			case 2:
+			case 3:
+				*val = 3;
+				break;
+			default:
+				return -EINVAL;
+			}
+
+			return 0;
+		default:
+			return -EOPNOTSUPP;
+		}
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int max31760_write(struct device *dev, enum hwmon_sensor_types type,
+			  u32 attr, int channel, long val)
+{
+	struct max31760_state *state = dev_get_drvdata(dev);
+	unsigned int pwm_index;
+	unsigned int reg_temp;
+	int temp;
+	u8 reg_val[2];
+
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_max:
+			reg_temp = REG_TEMP_MAX(channel);
+			break;
+		case hwmon_temp_crit:
+			reg_temp = REG_TEMP_CRIT(channel);
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+
+		temp = TEMP11_TO_REG(val);
+		reg_val[0] = temp >> 8;
+		reg_val[1] = temp & 0xFF;
+
+		return regmap_bulk_write(state->regmap, reg_temp, reg_val, 2);
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_enable:
+			if (val == 0)
+				return regmap_clear_bits(state->regmap, REG_CR3, BIT(channel));
+
+			if (val == 1)
+				return regmap_set_bits(state->regmap, REG_CR3, BIT(channel));
+
+			return -EOPNOTSUPP;
+		default:
+			return -EOPNOTSUPP;
+		}
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			if (val < 0 || val > 255)
+				return -EINVAL;
+
+			return regmap_write(state->regmap, REG_PWMR, val);
+		case hwmon_pwm_enable:
+			if (val == 1)
+				return regmap_set_bits(state->regmap, REG_CR2, CR2_DFC);
+
+			if (val == 2)
+				return regmap_clear_bits(state->regmap, REG_CR2, CR2_DFC);
+
+			return -EOPNOTSUPP;
+		case hwmon_pwm_freq:
+			pwm_index = find_closest(val, max31760_pwm_freq,
+						 ARRAY_SIZE(max31760_pwm_freq));
+
+			return regmap_update_bits(state->regmap,
+						  REG_CR1, CR1_DRV,
+						  FIELD_PREP(CR1_DRV, pwm_index));
+		case hwmon_pwm_auto_channels_temp:
+			switch (val) {
+			case 1:
+				break;
+			case 2:
+				val = 0;
+				break;
+			case 3:
+				val = 2;
+				break;
+			default:
+				return -EINVAL;
+			}
+
+			return regmap_update_bits(state->regmap, REG_CR1, CR1_TEMP_SRC, val);
+		default:
+			return -EOPNOTSUPP;
+		}
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_channel_info *max31760_info[] = {
+	HWMON_CHANNEL_INFO(chip,
+			   HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE,
+			   HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE),
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_FAULT |
+			   HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_LABEL),
+	HWMON_CHANNEL_INFO(pwm,
+			   HWMON_PWM_ENABLE | HWMON_PWM_FREQ | HWMON_PWM_INPUT |
+			   HWMON_PWM_AUTO_CHANNELS_TEMP),
+	NULL
+};
+
+static umode_t max31760_is_visible(const void *data,
+				   enum hwmon_sensor_types type,
+				   u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+		case hwmon_temp_max_alarm:
+		case hwmon_temp_crit_alarm:
+		case hwmon_temp_fault:
+		case hwmon_temp_label:
+			return 0444;
+		case hwmon_temp_max:
+		case hwmon_temp_crit:
+			return 0644;
+		default:
+			return 0;
+		}
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+		case hwmon_fan_fault:
+			return 0444;
+		case hwmon_fan_enable:
+			return 0644;
+		default:
+			return 0;
+		}
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_enable:
+		case hwmon_pwm_input:
+		case hwmon_pwm_freq:
+		case hwmon_pwm_auto_channels_temp:
+			return 0644;
+		default:
+			return 0;
+		}
+	default:
+		return 0;
+	}
+}
+
+int max31760_read_string(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, const char **str)
+{
+	switch (type) {
+	case hwmon_temp:
+		if (attr != hwmon_temp_label)
+			return -EOPNOTSUPP;
+
+		*str = channel ? "local" : "remote";
+
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_ops max31760_hwmon_ops = {
+	.is_visible = max31760_is_visible,
+	.read = max31760_read,
+	.write = max31760_write,
+	.read_string = max31760_read_string
+};
+
+static const struct hwmon_chip_info max31760_chip_info = {
+	.ops = &max31760_hwmon_ops,
+	.info = max31760_info,
+};
+
+static ssize_t lut_show(struct device *dev,
+			struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(devattr);
+	struct max31760_state *state = dev_get_drvdata(dev);
+	int ret;
+	unsigned int regval;
+
+	ret = regmap_read(state->regmap, REG_LUT(sda->index), &regval);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", regval);
+}
+
+static ssize_t lut_store(struct device *dev,
+			 struct device_attribute *devattr,
+			 const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(devattr);
+	struct max31760_state *state = dev_get_drvdata(dev);
+	unsigned int pwm;
+	int ret;
+
+	ret = kstrtou32(buf, 10, &pwm);
+	if (ret)
+		return ret;
+
+	if (pwm > 255)
+		return -EINVAL;
+
+	ret = regmap_write(state->regmap, REG_LUT(sda->index), pwm);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t pwm1_auto_point_temp_hyst_show(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	struct max31760_state *state = dev_get_drvdata(dev);
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(state->regmap, REG_CR1, &regval);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", (1 + (int)FIELD_GET(CR1_HYST, regval)) * 2000);
+}
+
+static ssize_t pwm1_auto_point_temp_hyst_store(struct device *dev,
+					       struct device_attribute *attr,
+					       const char *buf,
+					       size_t count)
+{
+	struct max31760_state *state = dev_get_drvdata(dev);
+	unsigned int hyst;
+	int ret;
+
+	ret = kstrtou32(buf, 10, &hyst);
+	if (ret)
+		return ret;
+
+	if (hyst == 2000)
+		ret = regmap_clear_bits(state->regmap, REG_CR1, CR1_HYST);
+	else if (hyst == 4000)
+		ret = regmap_set_bits(state->regmap, REG_CR1, CR1_HYST);
+	else
+		return -EINVAL;
+
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(pwm1_auto_point_temp_hyst);
+
+static void max31760_create_lut_nodes(struct max31760_state *state)
+{
+	int i;
+	struct sensor_device_attribute *sda;
+	struct lut_attribute *lut;
+
+	for (i = 0; i < LUT_SIZE; ++i) {
+		lut = &state->lut[i];
+		sda = &lut->sda;
+
+		snprintf(lut->name, sizeof(lut->name),
+			 "pwm1_auto_point%d_pwm", i + 1);
+
+		sda->dev_attr.attr.mode = 0644;
+		sda->index = i;
+		sda->dev_attr.show = lut_show;
+		sda->dev_attr.store = lut_store;
+		sda->dev_attr.attr.name = lut->name;
+
+		sysfs_attr_init(&sda->dev_attr.attr);
+
+		state->attrs[i] = &sda->dev_attr.attr;
+	}
+
+	state->attrs[i] = &dev_attr_pwm1_auto_point_temp_hyst.attr;
+
+	state->group.attrs = state->attrs;
+	state->groups[0] = &state->group;
+}
+
+static int max31760_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max31760_state *state;
+	struct device *hwmon_dev;
+	int ret;
+
+	state = devm_kzalloc(dev, sizeof(struct max31760_state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	state->regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(state->regmap))
+		return dev_err_probe(dev,
+				     PTR_ERR(state->regmap),
+				     "regmap initialization failed\n");
+
+	dev_set_drvdata(dev, state);
+
+	/* Set alert output to comparator mode */
+	ret = regmap_set_bits(state->regmap, REG_CR2, CR2_ALERTS);
+	if (ret)
+		return dev_err_probe(dev, ret, "cannot write register\n");
+
+	max31760_create_lut_nodes(state);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+							 state,
+							 &max31760_chip_info,
+							 state->groups);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct of_device_id max31760_of_match[] = {
+	{.compatible = "adi,max31760"},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max31760_of_match);
+
+static const struct i2c_device_id max31760_id[] = {
+	{"max31760"},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max31760_id);
+
+static int __maybe_unused max31760_suspend(struct device *dev)
+{
+	struct max31760_state *state = dev_get_drvdata(dev);
+
+	return regmap_set_bits(state->regmap, REG_CR2, CR2_STBY);
+}
+
+static int __maybe_unused max31760_resume(struct device *dev)
+{
+	struct max31760_state *state = dev_get_drvdata(dev);
+
+	return regmap_clear_bits(state->regmap, REG_CR2, CR2_STBY);
+}
+
+static SIMPLE_DEV_PM_OPS(max31760_pm_ops, max31760_suspend, max31760_resume);
+
+static struct i2c_driver max31760_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "max31760",
+		.of_match_table = of_match_ptr(max31760_of_match),
+		.pm = pm_ptr(&max31760_pm_ops)
+	},
+	.probe_new	= max31760_probe,
+	.id_table	= max31760_id
+};
+module_i2c_driver(max31760_driver);
+
+MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
+MODULE_DESCRIPTION("Analog Devices MAX31760 Fan Speed Controller");
+MODULE_SOFTDEP("pre: regmap_i2c");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
-- 
2.36.1

Re: [PATCH v3 1/2] drivers: hwmon: Add max31760 fan speed controller driver

[Guenter Roeck]

On Mon, Aug 08, 2022 at 08:09:30AM +0000, Ibrahim Tilki wrote:
> MAX31760 is a precision fan speed controller with nonvolatile lookup table.
> Device has one internal and one external temperature sensor support.
> Controls two fans and measures their speeds.
> Generates hardware alerts when programmable max and critical temperatures are exceeded.
> 
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> Reviewed-by: Nurettin Bolucu <Nurettin.Bolucu@analog.com>
> ---
>  drivers/hwmon/Kconfig    |  10 +
>  drivers/hwmon/Makefile   |   1 +
>  drivers/hwmon/max31760.c | 599 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 610 insertions(+)
>  create mode 100644 drivers/hwmon/max31760.c
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index e70d9614b..513113497 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1066,6 +1066,16 @@ config SENSORS_MAX31730
>  	  This driver can also be built as a module. If so, the module
>  	  will be called max31730.
>  
> +config SENSORS_MAX31760
> +	tristate "MAX31760 fan speed controller"
> +	depends on I2C
> +	select REGMAP_I2C
> +	help
> +	  Support for the Analog Devices MAX31760 Fan Speed Controller.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called max31760.
> +
>  config SENSORS_MAX6620
>  	tristate "Maxim MAX6620 fan controller"
>  	depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 007e829d1..1c0fa4dd8 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -140,6 +140,7 @@ obj-$(CONFIG_SENSORS_MAX1668)	+= max1668.o
>  obj-$(CONFIG_SENSORS_MAX197)	+= max197.o
>  obj-$(CONFIG_SENSORS_MAX31722)	+= max31722.o
>  obj-$(CONFIG_SENSORS_MAX31730)	+= max31730.o
> +obj-$(CONFIG_SENSORS_MAX31760)  += max31760.o
>  obj-$(CONFIG_SENSORS_MAX6620)	+= max6620.o
>  obj-$(CONFIG_SENSORS_MAX6621)	+= max6621.o
>  obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
> diff --git a/drivers/hwmon/max31760.c b/drivers/hwmon/max31760.c
> new file mode 100644
> index 000000000..dbb99d5d9
> --- /dev/null
> +++ b/drivers/hwmon/max31760.c
> @@ -0,0 +1,599 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/util_macros.h>
> +
> +#define REG_CR1		0x00
> +#define CR1_HYST	BIT(5)
> +#define CR1_DRV		GENMASK(4, 3)
> +#define CR1_TEMP_SRC	GENMASK(1, 0)
> +#define REG_CR2		0x01
> +#define CR2_STBY	BIT(7)
> +#define CR2_ALERTS	BIT(6)
> +#define CR2_DFC		BIT(0)
> +#define REG_CR3		0x02
> +#define REG_PWMR	0x50
> +#define REG_PWMV	0x51
> +#define REG_STATUS	0x5A
> +#define STATUS_ALARM_CRIT(ch)	BIT(2 + 2 * (ch))
> +#define STATUS_ALARM_MAX(ch)	BIT(3 + 2 * (ch))
> +#define STATUS_RDFA		BIT(6)
> +
> +#define REG_TACH(ch)		(0x52 + (ch) * 2)
> +#define REG_TEMP_INPUT(ch)	(0x56 + (ch) * 2)
> +#define REG_TEMP_MAX(ch)	(0x06 + (ch) * 2)
> +#define REG_TEMP_CRIT(ch)	(0x0A + (ch) * 2)
> +
> +#define TEMP11_FROM_REG(reg)	((reg) / 32 * 125)
> +#define TEMP11_TO_REG(val)	(DIV_ROUND_CLOSEST(clamp_val((val), -128000, \
> +							     127875), 125) * 32)
> +
> +#define LUT_SIZE	48
> +
> +#define REG_LUT(index)		(0x20 + (index))
> +
> +struct max31760_state {
> +	struct regmap *regmap;
> +
> +	struct lut_attribute {
> +		char name[24];
> +		struct sensor_device_attribute sda;
> +	} lut[LUT_SIZE];
> +
> +	struct attribute *attrs[LUT_SIZE + 2];
> +	struct attribute_group group;
> +	const struct attribute_group *groups[2];
> +};
> +
> +static bool max31760_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	return reg > 0x50;
> +}
> +
> +static const struct regmap_config regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = 0x5B,
> +	.cache_type = REGCACHE_RBTREE,
> +	.volatile_reg = max31760_volatile_reg,
> +};
> +
> +static const int max31760_pwm_freq[] = {33, 150, 1500, 25000};
> +
> +static int tach_to_rpm(u16 tach)
> +{
> +	if (tach == 0)
> +		tach = 1;
> +
> +	return 60 * 100000 / tach / 2;
> +}
> +
> +static int max31760_read(struct device *dev, enum hwmon_sensor_types type,
> +			 u32 attr, int channel, long *val)
> +{
> +	struct max31760_state *state = dev_get_drvdata(dev);
> +	unsigned int regval;
> +	unsigned int reg_temp;
> +	s16 temp;
> +	u8 reg[2];
> +	int ret;
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp_fault:
> +			ret = regmap_read(state->regmap, REG_STATUS, &regval);
> +			if (ret)
> +				return ret;
> +
> +			*val = FIELD_GET(STATUS_RDFA, regval);
> +
> +			return 0;
> +		case hwmon_temp_max_alarm:
> +			ret = regmap_read(state->regmap, REG_STATUS, &regval);
> +			if (ret)
> +				return ret;
> +
> +			if (channel)
> +				*val = FIELD_GET(STATUS_ALARM_MAX(1), regval);
> +			else
> +				*val = FIELD_GET(STATUS_ALARM_MAX(0), regval);
> +
> +			return 0;
> +		case hwmon_temp_crit_alarm:
> +			ret = regmap_read(state->regmap, REG_STATUS, &regval);
> +			if (ret)
> +				return ret;
> +
> +			if (channel)
> +				*val = FIELD_GET(STATUS_ALARM_CRIT(1), regval);
> +			else
> +				*val = FIELD_GET(STATUS_ALARM_CRIT(0), regval);
> +
> +			return 0;
> +		case hwmon_temp_input:
> +			reg_temp = REG_TEMP_INPUT(channel);
> +			break;
> +		case hwmon_temp_max:
> +			reg_temp = REG_TEMP_MAX(channel);
> +			break;
> +		case hwmon_temp_crit:
> +			reg_temp = REG_TEMP_CRIT(channel);
> +			break;
> +		default:
> +			return -EOPNOTSUPP;
> +		}
> +
> +		ret = regmap_bulk_read(state->regmap, reg_temp, reg, 2);
> +		if (ret)
> +			return ret;
> +
> +		temp = (reg[0] << 8) | reg[1];
> +
> +		*val = TEMP11_FROM_REG(temp);
> +
> +		return 0;
> +	case hwmon_fan:
> +		switch (attr) {
> +		case hwmon_fan_input:
> +			ret = regmap_bulk_read(state->regmap, REG_TACH(channel), reg, 2);
> +			if (ret)
> +				return ret;
> +
> +			*val = tach_to_rpm(reg[0] * 256 + reg[1]);
> +
> +			return 0;
> +		case hwmon_fan_fault:
> +			ret = regmap_read(state->regmap, REG_STATUS, &regval);
> +			if (ret)
> +				return ret;
> +
> +			if (channel)
> +				*val = FIELD_GET(BIT(1), regval);
> +			else
> +				*val = FIELD_GET(BIT(0), regval);
> +
> +			return 0;
> +		case hwmon_fan_enable:
> +			ret = regmap_read(state->regmap, REG_CR3, &regval);
> +			if (ret)
> +				return ret;
> +
> +			if (channel)
> +				*val = FIELD_GET(BIT(1), regval);
> +			else
> +				*val = FIELD_GET(BIT(0), regval);
> +
> +			return 0;
> +		default:
> +			return -EOPNOTSUPP;
> +		}
> +	case hwmon_pwm:
> +		switch (attr) {
> +		case hwmon_pwm_input:
> +			ret = regmap_read(state->regmap, REG_PWMV, &regval);
> +			if (ret)
> +				return ret;
> +
> +			*val = regval;
> +
> +			return 0;
> +		case hwmon_pwm_freq:
> +			ret = regmap_read(state->regmap, REG_CR1, &regval);
> +			if (ret)
> +				return ret;
> +
> +			regval = FIELD_GET(CR1_DRV, regval);
> +			if (regval >= ARRAY_SIZE(max31760_pwm_freq))
> +				return -EINVAL;
> +
> +			*val = max31760_pwm_freq[regval];
> +
> +			return 0;
> +		case hwmon_pwm_enable:
> +			ret = regmap_read(state->regmap, REG_CR2, &regval);
> +			if (ret)
> +				return ret;
> +
> +			*val = 2 - FIELD_GET(CR2_DFC, regval);
> +
> +			return 0;
> +		case hwmon_pwm_auto_channels_temp:
> +			ret = regmap_read(state->regmap, REG_CR1, &regval);
> +			if (ret)
> +				return ret;
> +
> +			switch (FIELD_GET(CR1_TEMP_SRC, regval)) {
> +			case 0:
> +				*val = 2;
> +				break;
> +			case 1:
> +				*val = 1;
> +				break;
> +			case 2:
> +			case 3:
> +				*val = 3;
> +				break;
> +			default:
> +				return -EINVAL;
> +			}
> +
> +			return 0;
> +		default:
> +			return -EOPNOTSUPP;
> +		}
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int max31760_write(struct device *dev, enum hwmon_sensor_types type,
> +			  u32 attr, int channel, long val)
> +{
> +	struct max31760_state *state = dev_get_drvdata(dev);
> +	unsigned int pwm_index;
> +	unsigned int reg_temp;
> +	int temp;
> +	u8 reg_val[2];
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp_max:
> +			reg_temp = REG_TEMP_MAX(channel);
> +			break;
> +		case hwmon_temp_crit:
> +			reg_temp = REG_TEMP_CRIT(channel);
> +			break;
> +		default:
> +			return -EOPNOTSUPP;
> +		}
> +
> +		temp = TEMP11_TO_REG(val);
> +		reg_val[0] = temp >> 8;
> +		reg_val[1] = temp & 0xFF;
> +
> +		return regmap_bulk_write(state->regmap, reg_temp, reg_val, 2);
> +	case hwmon_fan:
> +		switch (attr) {
> +		case hwmon_fan_enable:
> +			if (val == 0)
> +				return regmap_clear_bits(state->regmap, REG_CR3, BIT(channel));
> +
> +			if (val == 1)
> +				return regmap_set_bits(state->regmap, REG_CR3, BIT(channel));
> +
> +			return -EOPNOTSUPP;
> +		default:
> +			return -EOPNOTSUPP;
> +		}
> +	case hwmon_pwm:
> +		switch (attr) {
> +		case hwmon_pwm_input:
> +			if (val < 0 || val > 255)
> +				return -EINVAL;
> +
> +			return regmap_write(state->regmap, REG_PWMR, val);
> +		case hwmon_pwm_enable:
> +			if (val == 1)
> +				return regmap_set_bits(state->regmap, REG_CR2, CR2_DFC);
> +
> +			if (val == 2)
> +				return regmap_clear_bits(state->regmap, REG_CR2, CR2_DFC);
> +
> +			return -EOPNOTSUPP;
> +		case hwmon_pwm_freq:
> +			pwm_index = find_closest(val, max31760_pwm_freq,
> +						 ARRAY_SIZE(max31760_pwm_freq));
> +
> +			return regmap_update_bits(state->regmap,
> +						  REG_CR1, CR1_DRV,
> +						  FIELD_PREP(CR1_DRV, pwm_index));
> +		case hwmon_pwm_auto_channels_temp:
> +			switch (val) {
> +			case 1:
> +				break;
> +			case 2:
> +				val = 0;
> +				break;
> +			case 3:
> +				val = 2;
> +				break;
> +			default:
> +				return -EINVAL;
> +			}
> +
> +			return regmap_update_bits(state->regmap, REG_CR1, CR1_TEMP_SRC, val);
> +		default:
> +			return -EOPNOTSUPP;
> +		}
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static const struct hwmon_channel_info *max31760_info[] = {
> +	HWMON_CHANNEL_INFO(chip,
> +			   HWMON_C_REGISTER_TZ),
> +	HWMON_CHANNEL_INFO(fan,
> +			   HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE,
> +			   HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE),
> +	HWMON_CHANNEL_INFO(temp,
> +			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_FAULT |
> +			   HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
> +			   HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_LABEL),
> +	HWMON_CHANNEL_INFO(pwm,
> +			   HWMON_PWM_ENABLE | HWMON_PWM_FREQ | HWMON_PWM_INPUT |
> +			   HWMON_PWM_AUTO_CHANNELS_TEMP),
> +	NULL
> +};
> +
> +static umode_t max31760_is_visible(const void *data,
> +				   enum hwmon_sensor_types type,
> +				   u32 attr, int channel)
> +{
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp_input:
> +		case hwmon_temp_max_alarm:
> +		case hwmon_temp_crit_alarm:
> +		case hwmon_temp_fault:
> +		case hwmon_temp_label:
> +			return 0444;
> +		case hwmon_temp_max:
> +		case hwmon_temp_crit:
> +			return 0644;
> +		default:
> +			return 0;
> +		}
> +	case hwmon_fan:
> +		switch (attr) {
> +		case hwmon_fan_input:
> +		case hwmon_fan_fault:
> +			return 0444;
> +		case hwmon_fan_enable:
> +			return 0644;
> +		default:
> +			return 0;
> +		}
> +	case hwmon_pwm:
> +		switch (attr) {
> +		case hwmon_pwm_enable:
> +		case hwmon_pwm_input:
> +		case hwmon_pwm_freq:
> +		case hwmon_pwm_auto_channels_temp:
> +			return 0644;
> +		default:
> +			return 0;
> +		}
> +	default:
> +		return 0;
> +	}
> +}
> +
> +int max31760_read_string(struct device *dev, enum hwmon_sensor_types type,
> +			 u32 attr, int channel, const char **str)
> +{
> +	switch (type) {
> +	case hwmon_temp:
> +		if (attr != hwmon_temp_label)
> +			return -EOPNOTSUPP;
> +
> +		*str = channel ? "local" : "remote";
> +
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static const struct hwmon_ops max31760_hwmon_ops = {
> +	.is_visible = max31760_is_visible,
> +	.read = max31760_read,
> +	.write = max31760_write,
> +	.read_string = max31760_read_string
> +};
> +
> +static const struct hwmon_chip_info max31760_chip_info = {
> +	.ops = &max31760_hwmon_ops,
> +	.info = max31760_info,
> +};
> +
> +static ssize_t lut_show(struct device *dev,
> +			struct device_attribute *devattr, char *buf)
> +{
> +	struct sensor_device_attribute *sda = to_sensor_dev_attr(devattr);
> +	struct max31760_state *state = dev_get_drvdata(dev);
> +	int ret;
> +	unsigned int regval;
> +
> +	ret = regmap_read(state->regmap, REG_LUT(sda->index), &regval);
> +	if (ret)
> +		return ret;
> +
> +	return sprintf(buf, "%d\n", regval);

Please use sysfs_emit().

> +}
> +
> +static ssize_t lut_store(struct device *dev,
> +			 struct device_attribute *devattr,
> +			 const char *buf, size_t count)
> +{
> +	struct sensor_device_attribute *sda = to_sensor_dev_attr(devattr);
> +	struct max31760_state *state = dev_get_drvdata(dev);
> +	unsigned int pwm;
> +	int ret;
> +
> +	ret = kstrtou32(buf, 10, &pwm);
> +	if (ret)
> +		return ret;

You could use kstrtou8() to avoid the range check below.

> +
> +	if (pwm > 255)
> +		return -EINVAL;
> +
> +	ret = regmap_write(state->regmap, REG_LUT(sda->index), pwm);
> +	if (ret)
> +		return ret;
> +
> +	return count;
> +}
> +
> +static ssize_t pwm1_auto_point_temp_hyst_show(struct device *dev,
> +					      struct device_attribute *attr,
> +					      char *buf)
> +{
> +	struct max31760_state *state = dev_get_drvdata(dev);
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(state->regmap, REG_CR1, &regval);
> +	if (ret)
> +		return ret;
> +
> +	return sprintf(buf, "%d\n", (1 + (int)FIELD_GET(CR1_HYST, regval)) * 2000);

Please use sysfs_emit().

> +}
> +
> +static ssize_t pwm1_auto_point_temp_hyst_store(struct device *dev,
> +					       struct device_attribute *attr,
> +					       const char *buf,
> +					       size_t count)
> +{
> +	struct max31760_state *state = dev_get_drvdata(dev);
> +	unsigned int hyst;
> +	int ret;
> +
> +	ret = kstrtou32(buf, 10, &hyst);
> +	if (ret)
> +		return ret;
> +
> +	if (hyst == 2000)
> +		ret = regmap_clear_bits(state->regmap, REG_CR1, CR1_HYST);
> +	else if (hyst == 4000)
> +		ret = regmap_set_bits(state->regmap, REG_CR1, CR1_HYST);
> +	else
> +		return -EINVAL;

I would suggest to use a closest match here. Something like

	if (hyst < 3000)
		ret = regmap_clear_bits(state->regmap, REG_CR1, CR1_HYST);
	else
		ret = regmap_set_bits(state->regmap, REG_CR1, CR1_HYST);

This way the user does not have to know the exact acceptable values.

> +
> +	if (ret)
> +		return ret;
> +
> +	return count;
> +}
> +
> +static DEVICE_ATTR_RW(pwm1_auto_point_temp_hyst);
> +
> +static void max31760_create_lut_nodes(struct max31760_state *state)
> +{
> +	int i;
> +	struct sensor_device_attribute *sda;
> +	struct lut_attribute *lut;
> +
> +	for (i = 0; i < LUT_SIZE; ++i) {
> +		lut = &state->lut[i];
> +		sda = &lut->sda;
> +
> +		snprintf(lut->name, sizeof(lut->name),
> +			 "pwm1_auto_point%d_pwm", i + 1);
> +
> +		sda->dev_attr.attr.mode = 0644;
> +		sda->index = i;
> +		sda->dev_attr.show = lut_show;
> +		sda->dev_attr.store = lut_store;
> +		sda->dev_attr.attr.name = lut->name;
> +
> +		sysfs_attr_init(&sda->dev_attr.attr);
> +
> +		state->attrs[i] = &sda->dev_attr.attr;
> +	}
> +
> +	state->attrs[i] = &dev_attr_pwm1_auto_point_temp_hyst.attr;
> +
> +	state->group.attrs = state->attrs;
> +	state->groups[0] = &state->group;
> +}
> +
> +static int max31760_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct max31760_state *state;
> +	struct device *hwmon_dev;
> +	int ret;
> +
> +	state = devm_kzalloc(dev, sizeof(struct max31760_state), GFP_KERNEL);
> +	if (!state)
> +		return -ENOMEM;
> +
> +	state->regmap = devm_regmap_init_i2c(client, &regmap_config);
> +	if (IS_ERR(state->regmap))
> +		return dev_err_probe(dev,
> +				     PTR_ERR(state->regmap),
> +				     "regmap initialization failed\n");
> +
> +	dev_set_drvdata(dev, state);
> +
> +	/* Set alert output to comparator mode */
> +	ret = regmap_set_bits(state->regmap, REG_CR2, CR2_ALERTS);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "cannot write register\n");
> +
> +	max31760_create_lut_nodes(state);
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
> +							 state,
> +							 &max31760_chip_info,
> +							 state->groups);
> +
> +	return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static const struct of_device_id max31760_of_match[] = {
> +	{.compatible = "adi,max31760"},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, max31760_of_match);
> +
> +static const struct i2c_device_id max31760_id[] = {
> +	{"max31760"},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, max31760_id);
> +
> +static int __maybe_unused max31760_suspend(struct device *dev)
> +{
> +	struct max31760_state *state = dev_get_drvdata(dev);
> +
> +	return regmap_set_bits(state->regmap, REG_CR2, CR2_STBY);
> +}
> +
> +static int __maybe_unused max31760_resume(struct device *dev)
> +{
> +	struct max31760_state *state = dev_get_drvdata(dev);
> +
> +	return regmap_clear_bits(state->regmap, REG_CR2, CR2_STBY);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(max31760_pm_ops, max31760_suspend, max31760_resume);
> +
> +static struct i2c_driver max31760_driver = {
> +	.class		= I2C_CLASS_HWMON,
> +	.driver = {
> +		.name	= "max31760",
> +		.of_match_table = of_match_ptr(max31760_of_match),
> +		.pm = pm_ptr(&max31760_pm_ops)
> +	},
> +	.probe_new	= max31760_probe,
> +	.id_table	= max31760_id
> +};
> +module_i2c_driver(max31760_driver);
> +
> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices MAX31760 Fan Speed Controller");
> +MODULE_SOFTDEP("pre: regmap_i2c");
> +MODULE_VERSION("1.0");
> +MODULE_LICENSE("GPL");
> -- 
> 2.36.1
> 

[PATCH v3 2/2] docs: hwmon: add max31760 documentation

[Ibrahim Tilki]

Adding documentation for max31760 fan speed controller

Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
---
 Documentation/hwmon/max31760.rst | 65 ++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/hwmon/max31760.rst

diff --git a/Documentation/hwmon/max31760.rst b/Documentation/hwmon/max31760.rst
new file mode 100644
index 000000000..067b3a5ce
--- /dev/null
+++ b/Documentation/hwmon/max31760.rst
@@ -0,0 +1,65 @@
+Kernel driver max31760
+======================
+
+Supported chips:
+  * Analog Devices MAX31760
+
+    Prefix: 'max31760'
+
+    Addresses scanned: none
+
+    Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf
+
+
+Author: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+Description
+-----------
+
+MAX31760 is a precision fan speed controller with nonvolatile lookup table.
+Device has one internal and one external temperature sensor support.
+Controls two fans and measures their speeds.
+Generates hardware alerts when programmable max and critical temperatures are exceeded.
+Supports direct and temperature based automatic fan control.
+
+Temperature measurement range: from -55°C to 125°C
+
+Temperature Resolution: 11 Bits, ±0.125°C
+
+Please refer how to instantiate this driver: Documentation/i2c/instantiating-devices.rst
+
+Lookup table for auto fan control
+---------------------------------
+
+========= =================================
+LUT Index Name
+========= =================================
+1         PWM value for T < +18°C
+2         PWM value for +18°C ≤ T < +20°C
+3         PWM value for +20°C ≤ T < +22°C
+...       ...
+47        PWM value for +108°C ≤ T < +110°C
+48        PWM value for T ≥ +110°C
+========= =================================
+
+Sysfs entries
+-------------
+
+=============================== =================================================================================
+fan[1-2]_input                  Fan speed (in RPM)
+fan[1-2]_enable                 Enable fan readings and fan fault alarms
+fan[1-2]_fault                  Fan fault status
+temp[1-2]_label                 "Remote" and "Local" temperature channel labels
+temp[1-2]_input                 Temperature sensor readings (in millidegrees Celsius)
+temp1_fault                     Remote temperature sensor fault status
+temp[1-2]_max                   Temperature max value. Asserts "ALERT" pin when exceeded
+temp[1-2]_max_alarm             Temperature max alarm status
+temp[1-2]_crit                  Temperature critical value. Asserts "SHDN" pin when exceeded
+temp[1-2]_crit_alarm            Temperature critical alarm status
+pwm1                            PWM value for direct fan control
+pwm1_enable                     1: direct fan control, 2: temperature based auto fan control
+pwm1_freq                       PWM frequency in hertz
+pwm1_auto_channels_temp         Temperature source for auto fan control. 1: temp1, 2: temp2, 3: max(temp1, temp2)
+pwm1_auto_point[1-48]_pwm       PWM value for LUT point
+pwm1_auto_point_temp_hyst       Temperature hysteresis for auto fan control. Can be either 2000mC or 4000mC
+=============================== =================================================================================
-- 
2.36.1