[PATCH 0/7] drm/i915: Add HWMON support

linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/7] drm/i915: Add HWMON support
@ 2022-10-13 15:45 Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure Ashutosh Dixit
                   ` (6 more replies)
  0 siblings, 7 replies; 19+ messages in thread
From: Ashutosh Dixit @ 2022-10-13 15:45 UTC (permalink / raw)
  To: intel-gfx; +Cc: dri-devel, linux-hwmon, Rodrigo Vivi, Andi Shyti

This series adds the HWMON support for DGFX

Test-with: 20221013151400.2086268-1-ashutosh.dixit@intel.com

v2:
  - Reorganized series. Created first patch as infrastructure patch
    followed by feature patches. (Ashutosh)
  - Fixed review comments (Jani)
  - Fixed review comments (Ashutosh)

v3:
  - Fixed review comments from Guenter
  - Exposed energy inferface as standard hwmon interface (Ashutosh)
  - For power interface added entries for critical power and maintained
    standard interface for all the entries except
    power1_max_interval
  - Extended support for XEHPSDV (Ashutosh)

v4:
  - Fixed review comment from Guenter
  - Cleaned up unused code

v5:
  - Fixed review comments (Jani)

v6:
  - Fixed review comments (Ashutosh)
  - Updated date and kernel version in documentation

v7:
  - Fixed review comments (Anshuman)
  - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)

v8: s/hwmon_device_register_with_info/
      devm_hwmon_device_register_with_info/ (Ashutosh)

v9: Addressed review comments from Rodrigo and Andi

Ashutosh Dixit (2):
  drm/i915/hwmon: Expose card reactive critical power
  drm/i915/hwmon: Expose power1_max_interval

Dale B Stimson (4):
  drm/i915/hwmon: Add HWMON infrastructure
  drm/i915/hwmon: Power PL1 limit and TDP setting
  drm/i915/hwmon: Show device level energy usage
  drm/i915/hwmon: Extend power/energy for XEHPSDV

Riana Tauro (1):
  drm/i915/hwmon: Add HWMON current voltage support

 .../ABI/testing/sysfs-driver-intel-i915-hwmon |  75 ++
 MAINTAINERS                                   |   1 +
 drivers/gpu/drm/i915/Makefile                 |   3 +
 drivers/gpu/drm/i915/gt/intel_gt_regs.h       |   8 +
 drivers/gpu/drm/i915/i915_driver.c            |   5 +
 drivers/gpu/drm/i915/i915_drv.h               |   2 +
 drivers/gpu/drm/i915/i915_hwmon.c             | 738 ++++++++++++++++++
 drivers/gpu/drm/i915/i915_hwmon.h             |  20 +
 drivers/gpu/drm/i915/i915_reg.h               |   6 +
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |  21 +
 10 files changed, 879 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
 create mode 100644 drivers/gpu/drm/i915/i915_hwmon.c
 create mode 100644 drivers/gpu/drm/i915/i915_hwmon.h

-- 
2.38.0


^ permalink raw reply	[flat|nested] 19+ messages in thread

* [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure
  2022-10-13 15:45 [PATCH 0/7] drm/i915: Add HWMON support Ashutosh Dixit
@ 2022-10-13 15:45 ` Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 2/7] drm/i915/hwmon: Add HWMON current voltage support Ashutosh Dixit
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 19+ messages in thread
From: Ashutosh Dixit @ 2022-10-13 15:45 UTC (permalink / raw)
  To: intel-gfx; +Cc: dri-devel, linux-hwmon, Rodrigo Vivi, Andi Shyti

From: Dale B Stimson <dale.b.stimson@intel.com>

The i915 HWMON module will be used to expose voltage, power and energy
values for dGfx. Here we set up i915 hwmon infrastructure including i915
hwmon registration, basic data structures and functions.

v2:
  - Create HWMON infra patch (Ashutosh)
  - Fixed review comments (Jani)
  - Remove "select HWMON" from i915/Kconfig (Jani)
v3: Use hwm_ prefix for static functions (Ashutosh)
v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
    doesn't work if hwmon is compiled as a module (Guenter)
v5: Fixed review comments (Jani)
v6: s/kzalloc/devm_kzalloc/ (Andi)
v7: s/hwmon_device_register_with_info/
      devm_hwmon_device_register_with_info/ (Ashutosh)

Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
---
 drivers/gpu/drm/i915/Makefile      |   3 +
 drivers/gpu/drm/i915/i915_driver.c |   5 ++
 drivers/gpu/drm/i915/i915_drv.h    |   2 +
 drivers/gpu/drm/i915/i915_hwmon.c  | 122 +++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_hwmon.h  |  20 +++++
 5 files changed, 152 insertions(+)
 create mode 100644 drivers/gpu/drm/i915/i915_hwmon.c
 create mode 100644 drivers/gpu/drm/i915/i915_hwmon.h

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index f8cc1eb52626e..2535593ab379e 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -209,6 +209,9 @@ i915-y += gt/uc/intel_uc.o \
 # graphics system controller (GSC) support
 i915-y += gt/intel_gsc.o
 
+# graphics hardware monitoring (HWMON) support
+i915-$(CONFIG_HWMON) += i915_hwmon.o
+
 # modesetting core code
 i915-y += \
 	display/hsw_ips.o \
diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c
index 24d3d2d85fd57..ffff49868dc51 100644
--- a/drivers/gpu/drm/i915/i915_driver.c
+++ b/drivers/gpu/drm/i915/i915_driver.c
@@ -81,6 +81,7 @@
 #include "i915_drm_client.h"
 #include "i915_drv.h"
 #include "i915_getparam.h"
+#include "i915_hwmon.h"
 #include "i915_ioc32.h"
 #include "i915_ioctl.h"
 #include "i915_irq.h"
@@ -763,6 +764,8 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 	for_each_gt(gt, dev_priv, i)
 		intel_gt_driver_register(gt);
 
+	i915_hwmon_register(dev_priv);
+
 	intel_display_driver_register(dev_priv);
 
 	intel_power_domains_enable(dev_priv);
@@ -795,6 +798,8 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
 	for_each_gt(gt, dev_priv, i)
 		intel_gt_driver_unregister(gt);
 
+	i915_hwmon_unregister(dev_priv);
+
 	i915_perf_unregister(dev_priv);
 	i915_pmu_unregister(dev_priv);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 90ed8e6db2fe0..a81372ddd2db7 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -349,6 +349,8 @@ struct drm_i915_private {
 
 	struct i915_perf perf;
 
+	struct i915_hwmon *hwmon;
+
 	/* Abstract the submission mechanism (legacy ringbuffer or execlists) away */
 	struct intel_gt gt0;
 
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
new file mode 100644
index 0000000000000..231552fda374a
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/types.h>
+
+#include "i915_drv.h"
+#include "i915_hwmon.h"
+#include "i915_reg.h"
+#include "intel_mchbar_regs.h"
+
+struct hwm_reg {
+};
+
+struct hwm_drvdata {
+	struct i915_hwmon *hwmon;
+	struct intel_uncore *uncore;
+	struct device *hwmon_dev;
+	char name[12];
+};
+
+struct i915_hwmon {
+	struct hwm_drvdata ddat;
+	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
+	struct hwm_reg rg;
+};
+
+static const struct hwmon_channel_info *hwm_info[] = {
+	NULL
+};
+
+static umode_t
+hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+	       u32 attr, int channel)
+{
+	switch (type) {
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+	 int channel, long *val)
+{
+	switch (type) {
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+	  int channel, long val)
+{
+	switch (type) {
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_ops hwm_ops = {
+	.is_visible = hwm_is_visible,
+	.read = hwm_read,
+	.write = hwm_write,
+};
+
+static const struct hwmon_chip_info hwm_chip_info = {
+	.ops = &hwm_ops,
+	.info = hwm_info,
+};
+
+static void
+hwm_get_preregistration_info(struct drm_i915_private *i915)
+{
+}
+
+void i915_hwmon_register(struct drm_i915_private *i915)
+{
+	struct device *dev = i915->drm.dev;
+	struct i915_hwmon *hwmon;
+	struct device *hwmon_dev;
+	struct hwm_drvdata *ddat;
+
+	/* hwmon is available only for dGfx */
+	if (!IS_DGFX(i915))
+		return;
+
+	hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return;
+
+	i915->hwmon = hwmon;
+	mutex_init(&hwmon->hwmon_lock);
+	ddat = &hwmon->ddat;
+
+	ddat->hwmon = hwmon;
+	ddat->uncore = &i915->uncore;
+	snprintf(ddat->name, sizeof(ddat->name), "i915");
+
+	hwm_get_preregistration_info(i915);
+
+	/*  hwmon_dev points to device hwmon<i> */
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat->name,
+							 ddat,
+							 &hwm_chip_info,
+							 NULL);
+	if (IS_ERR(hwmon_dev)) {
+		i915->hwmon = NULL;
+		return;
+	}
+
+	ddat->hwmon_dev = hwmon_dev;
+}
+
+void i915_hwmon_unregister(struct drm_i915_private *i915)
+{
+	fetch_and_zero(&i915->hwmon);
+}
diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
new file mode 100644
index 0000000000000..7ca9cf2c34c96
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_hwmon.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: MIT */
+
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __I915_HWMON_H__
+#define __I915_HWMON_H__
+
+struct drm_i915_private;
+
+#if IS_REACHABLE(CONFIG_HWMON)
+void i915_hwmon_register(struct drm_i915_private *i915);
+void i915_hwmon_unregister(struct drm_i915_private *i915);
+#else
+static inline void i915_hwmon_register(struct drm_i915_private *i915) { };
+static inline void i915_hwmon_unregister(struct drm_i915_private *i915) { };
+#endif
+
+#endif /* __I915_HWMON_H__ */
-- 
2.38.0


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 2/7] drm/i915/hwmon: Add HWMON current voltage support
  2022-10-13 15:45 [PATCH 0/7] drm/i915: Add HWMON support Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure Ashutosh Dixit
@ 2022-10-13 15:45 ` Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 3/7] drm/i915/hwmon: Power PL1 limit and TDP setting Ashutosh Dixit
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 19+ messages in thread
From: Ashutosh Dixit @ 2022-10-13 15:45 UTC (permalink / raw)
  To: intel-gfx; +Cc: dri-devel, linux-hwmon, Rodrigo Vivi, Andi Shyti

From: Riana Tauro <riana.tauro@intel.com>

Use i915 HWMON subsystem to display current input voltage.

v2:
  - Updated date and kernel version in feature description
  - Fixed review comments (Ashutosh)
v3: Use macro HWMON_CHANNEL_INFO to define hwmon channel (Guenter)
v4:
  - Fixed review comments (Ashutosh)
  - Use hwm_ prefix for static functions (Ashutosh)
v5: Added unit of voltage as millivolts (Ashutosh)
v6: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v7: Change contact to intel-gfx (Rodrigo)
    GEN12_RPSTAT1 is available for all Gen12+ (Andi)
    Added Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
    to MAINTAINERS

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |  7 +++
 MAINTAINERS                                   |  1 +
 drivers/gpu/drm/i915/gt/intel_gt_regs.h       |  3 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 53 +++++++++++++++++++
 4 files changed, 64 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
new file mode 100644
index 0000000000000..5f4b136f08509
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -0,0 +1,7 @@
+What:		/sys/devices/.../hwmon/hwmon<i>/in0_input
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RO. Current Voltage in millivolt.
+
+		Only supported for particular Intel i915 graphics platforms.
diff --git a/MAINTAINERS b/MAINTAINERS
index f07a8bf8744f9..7d57ede980940 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10144,6 +10144,7 @@ Q:	http://patchwork.freedesktop.org/project/intel-gfx/
 B:	https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs
 C:	irc://irc.oftc.net/intel-gfx
 T:	git git://anongit.freedesktop.org/drm-intel
+F:	Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
 F:	Documentation/gpu/i915.rst
 F:	drivers/gpu/drm/i915/
 F:	include/drm/i915*
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_regs.h b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
index 7f79bbf978284..fcf5f9012852f 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_regs.h
+++ b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
@@ -1519,6 +1519,9 @@
 #define VLV_RENDER_C0_COUNT			_MMIO(0x138118)
 #define VLV_MEDIA_C0_COUNT			_MMIO(0x13811c)
 
+#define GEN12_RPSTAT1				_MMIO(0x1381b4)
+#define   GEN12_VOLTAGE_MASK			REG_GENMASK(10, 0)
+
 #define GEN11_GT_INTR_DW(x)			_MMIO(0x190018 + ((x) * 4))
 #define   GEN11_CSME				(31)
 #define   GEN11_GUNIT				(28)
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 231552fda374a..025399391ddcc 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -11,8 +11,16 @@
 #include "i915_hwmon.h"
 #include "i915_reg.h"
 #include "intel_mchbar_regs.h"
+#include "gt/intel_gt_regs.h"
+
+/*
+ * SF_* - scale factors for particular quantities according to hwmon spec.
+ * - voltage  - millivolts
+ */
+#define SF_VOLTAGE	1000
 
 struct hwm_reg {
+	i915_reg_t gt_perf_status;
 };
 
 struct hwm_drvdata {
@@ -29,14 +37,51 @@ struct i915_hwmon {
 };
 
 static const struct hwmon_channel_info *hwm_info[] = {
+	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	NULL
 };
 
+static umode_t
+hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+
+	switch (attr) {
+	case hwmon_in_input:
+		return IS_DG1(i915) || IS_DG2(i915) ? 0444 : 0;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 reg_value;
+
+	switch (attr) {
+	case hwmon_in_input:
+		with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+			reg_value = intel_uncore_read(ddat->uncore, hwmon->rg.gt_perf_status);
+		/* HW register value in units of 2.5 millivolt */
+		*val = DIV_ROUND_CLOSEST(REG_FIELD_GET(GEN12_VOLTAGE_MASK, reg_value) * 25, 10);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
 {
+	struct hwm_drvdata *ddat = (struct hwm_drvdata *)drvdata;
+
 	switch (type) {
+	case hwmon_in:
+		return hwm_in_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -46,7 +91,11 @@ static int
 hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	 int channel, long *val)
 {
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+
 	switch (type) {
+	case hwmon_in:
+		return hwm_in_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -76,6 +125,10 @@ static const struct hwmon_chip_info hwm_chip_info = {
 static void
 hwm_get_preregistration_info(struct drm_i915_private *i915)
 {
+	struct i915_hwmon *hwmon = i915->hwmon;
+
+	/* Available for all Gen12+/dGfx */
+	hwmon->rg.gt_perf_status = GEN12_RPSTAT1;
 }
 
 void i915_hwmon_register(struct drm_i915_private *i915)
-- 
2.38.0


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 3/7] drm/i915/hwmon: Power PL1 limit and TDP setting
  2022-10-13 15:45 [PATCH 0/7] drm/i915: Add HWMON support Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 2/7] drm/i915/hwmon: Add HWMON current voltage support Ashutosh Dixit
@ 2022-10-13 15:45 ` Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 4/7] drm/i915/hwmon: Show device level energy usage Ashutosh Dixit
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 19+ messages in thread
From: Ashutosh Dixit @ 2022-10-13 15:45 UTC (permalink / raw)
  To: intel-gfx; +Cc: dri-devel, linux-hwmon, Rodrigo Vivi, Andi Shyti

From: Dale B Stimson <dale.b.stimson@intel.com>

Use i915 HWMON to display/modify dGfx power PL1 limit and TDP setting.

v2:
  - Fix review comments (Ashutosh)
  - Do not restore power1_max upon module unload/load sequence
    because on production systems modules are always loaded
    and not unloaded/reloaded (Ashutosh)
  - Fix review comments (Jani)
  - Remove endianness conversion (Ashutosh)
v3: Add power1_rated_max (Ashutosh)
v4:
  - Use macro HWMON_CHANNEL_INFO to define power channel (Guenter)
  - Update the date and kernel version in Documentation (Badal)
v5: Use hwm_ prefix for static functions (Ashutosh)
v6: Fix review comments (Ashutosh)
v7:
  - Define PCU_PACKAGE_POWER_SKU for DG1,DG2 and move
    PKG_PKG_TDP to intel_mchbar_regs.h (Anshuman)
  - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v8: Change contact to intel-gfx (Rodrigo)
    Minor change to val_sku_unit init (Andi)

Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |  20 +++
 drivers/gpu/drm/i915/i915_hwmon.c             | 154 ++++++++++++++++++
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |  12 ++
 3 files changed, 186 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 5f4b136f08509..e0b1af4ec6d84 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -5,3 +5,23 @@ Contact:	intel-gfx@lists.freedesktop.org
 Description:	RO. Current Voltage in millivolt.
 
 		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RW. Card reactive sustained  (PL1/Tau) power limit in microwatts.
+
+		The power controller will throttle the operating frequency
+		if the power averaged over a window (typically seconds)
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_rated_max
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RO. Card default power limit (default TDP setting).
+
+		Only supported for particular Intel i915 graphics platforms.
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 025399391ddcc..db254413a07da 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -16,11 +16,16 @@
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - voltage  - millivolts
+ * - power  - microwatts
  */
 #define SF_VOLTAGE	1000
+#define SF_POWER	1000000
 
 struct hwm_reg {
 	i915_reg_t gt_perf_status;
+	i915_reg_t pkg_power_sku_unit;
+	i915_reg_t pkg_power_sku;
+	i915_reg_t pkg_rapl_limit;
 };
 
 struct hwm_drvdata {
@@ -34,10 +39,68 @@ struct i915_hwmon {
 	struct hwm_drvdata ddat;
 	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
 	struct hwm_reg rg;
+	int scl_shift_power;
 };
 
+static void
+hwm_locked_with_pm_intel_uncore_rmw(struct hwm_drvdata *ddat,
+				    i915_reg_t reg, u32 clear, u32 set)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	struct intel_uncore *uncore = ddat->uncore;
+	intel_wakeref_t wakeref;
+
+	mutex_lock(&hwmon->hwmon_lock);
+
+	with_intel_runtime_pm(uncore->rpm, wakeref)
+		intel_uncore_rmw(uncore, reg, clear, set);
+
+	mutex_unlock(&hwmon->hwmon_lock);
+}
+
+/*
+ * This function's return type of u64 allows for the case where the scaling
+ * of the field taken from the 32-bit register value might cause a result to
+ * exceed 32 bits.
+ */
+static u64
+hwm_field_read_and_scale(struct hwm_drvdata *ddat, i915_reg_t rgadr,
+			 u32 field_msk, int nshift, u32 scale_factor)
+{
+	struct intel_uncore *uncore = ddat->uncore;
+	intel_wakeref_t wakeref;
+	u32 reg_value;
+
+	with_intel_runtime_pm(uncore->rpm, wakeref)
+		reg_value = intel_uncore_read(uncore, rgadr);
+
+	reg_value = REG_FIELD_GET(field_msk, reg_value);
+
+	return mul_u64_u32_shr(reg_value, scale_factor, nshift);
+}
+
+static void
+hwm_field_scale_and_write(struct hwm_drvdata *ddat, i915_reg_t rgadr,
+			  u32 field_msk, int nshift,
+			  unsigned int scale_factor, long lval)
+{
+	u32 nval;
+	u32 bits_to_clear;
+	u32 bits_to_set;
+
+	/* Computation in 64-bits to avoid overflow. Round to nearest. */
+	nval = DIV_ROUND_CLOSEST_ULL((u64)lval << nshift, scale_factor);
+
+	bits_to_clear = field_msk;
+	bits_to_set = FIELD_PREP(field_msk, nval);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, rgadr,
+					    bits_to_clear, bits_to_set);
+}
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
 	NULL
 };
 
@@ -73,6 +136,64 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	switch (attr) {
+	case hwmon_power_max:
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
+	case hwmon_power_rated_max:
+		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	switch (attr) {
+	case hwmon_power_max:
+		*val = hwm_field_read_and_scale(ddat,
+						hwmon->rg.pkg_rapl_limit,
+						PKG_PWR_LIM_1,
+						hwmon->scl_shift_power,
+						SF_POWER);
+		return 0;
+	case hwmon_power_rated_max:
+		*val = hwm_field_read_and_scale(ddat,
+						hwmon->rg.pkg_power_sku,
+						PKG_PKG_TDP,
+						hwmon->scl_shift_power,
+						SF_POWER);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	switch (attr) {
+	case hwmon_power_max:
+		hwm_field_scale_and_write(ddat,
+					  hwmon->rg.pkg_rapl_limit,
+					  PKG_PWR_LIM_1,
+					  hwmon->scl_shift_power,
+					  SF_POWER, val);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -82,6 +203,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	switch (type) {
 	case hwmon_in:
 		return hwm_in_is_visible(ddat, attr);
+	case hwmon_power:
+		return hwm_power_is_visible(ddat, attr, channel);
 	default:
 		return 0;
 	}
@@ -96,6 +219,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_in:
 		return hwm_in_read(ddat, attr, val);
+	case hwmon_power:
+		return hwm_power_read(ddat, attr, channel, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -105,7 +230,11 @@ static int
 hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	  int channel, long val)
 {
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+
 	switch (type) {
+	case hwmon_power:
+		return hwm_power_write(ddat, attr, channel, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -126,9 +255,34 @@ static void
 hwm_get_preregistration_info(struct drm_i915_private *i915)
 {
 	struct i915_hwmon *hwmon = i915->hwmon;
+	struct intel_uncore *uncore = &i915->uncore;
+	intel_wakeref_t wakeref;
+	u32 val_sku_unit = 0;
 
 	/* Available for all Gen12+/dGfx */
 	hwmon->rg.gt_perf_status = GEN12_RPSTAT1;
+
+	if (IS_DG1(i915) || IS_DG2(i915)) {
+		hwmon->rg.pkg_power_sku_unit = PCU_PACKAGE_POWER_SKU_UNIT;
+		hwmon->rg.pkg_power_sku = PCU_PACKAGE_POWER_SKU;
+		hwmon->rg.pkg_rapl_limit = PCU_PACKAGE_RAPL_LIMIT;
+	} else {
+		hwmon->rg.pkg_power_sku_unit = INVALID_MMIO_REG;
+		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
+		hwmon->rg.pkg_rapl_limit = INVALID_MMIO_REG;
+	}
+
+	with_intel_runtime_pm(uncore->rpm, wakeref) {
+		/*
+		 * The contents of register hwmon->rg.pkg_power_sku_unit do not change,
+		 * so read it once and store the shift values.
+		 */
+		if (i915_mmio_reg_valid(hwmon->rg.pkg_power_sku_unit))
+			val_sku_unit = intel_uncore_read(uncore,
+							 hwmon->rg.pkg_power_sku_unit);
+
+		hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
+	}
 }
 
 void i915_hwmon_register(struct drm_i915_private *i915)
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index ffc702b79579e..d7e2e47117920 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -189,6 +189,16 @@
 #define  DG1_QCLK_RATIO_MASK			REG_GENMASK(9, 2)
 #define  DG1_QCLK_REFERENCE			REG_BIT(10)
 
+/*
+ * *_PACKAGE_POWER_SKU - SKU power and timing parameters.
+ */
+#define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
+#define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
+
+#define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
+#define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
+#define   PKG_TIME_UNIT				REG_GENMASK(19, 16)
+
 #define GEN6_GT_PERF_STATUS			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5948)
 #define GEN6_RP_STATE_LIMITS			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5994)
 #define GEN6_RP_STATE_CAP			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998)
@@ -198,6 +208,8 @@
 
 #define GEN10_FREQ_INFO_REC			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5ef0)
 #define   RPE_MASK				REG_GENMASK(15, 8)
+#define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
+#define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.38.0


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 4/7] drm/i915/hwmon: Show device level energy usage
  2022-10-13 15:45 [PATCH 0/7] drm/i915: Add HWMON support Ashutosh Dixit
                   ` (2 preceding siblings ...)
  2022-10-13 15:45 ` [PATCH 3/7] drm/i915/hwmon: Power PL1 limit and TDP setting Ashutosh Dixit
@ 2022-10-13 15:45 ` Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Ashutosh Dixit
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 19+ messages in thread
From: Ashutosh Dixit @ 2022-10-13 15:45 UTC (permalink / raw)
  To: intel-gfx; +Cc: dri-devel, linux-hwmon, Rodrigo Vivi, Andi Shyti

From: Dale B Stimson <dale.b.stimson@intel.com>

Use i915 HWMON to display device level energy input.

v2: Updated the date and kernel version in feature description
v3:
  - Cleaned up hwm_energy function and removed unused function
    i915_hwmon_energy_status_get (Ashutosh)
v4: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: Change contact to intel-gfx (Rodrigo)
    Change return type of hwm_energy to void (Andi)

Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   8 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 106 +++++++++++++++++-
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   2 +
 3 files changed, 114 insertions(+), 2 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index e0b1af4ec6d84..aa00c558495b3 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -25,3 +25,11 @@ Contact:	intel-gfx@lists.freedesktop.org
 Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RO. Energy input of device in microjoules.
+
+		Only supported for particular Intel i915 graphics platforms.
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index db254413a07da..d8d30daa37944 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -17,21 +17,30 @@
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - voltage  - millivolts
  * - power  - microwatts
+ * - energy - microjoules
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
+#define SF_ENERGY	1000000
 
 struct hwm_reg {
 	i915_reg_t gt_perf_status;
 	i915_reg_t pkg_power_sku_unit;
 	i915_reg_t pkg_power_sku;
 	i915_reg_t pkg_rapl_limit;
+	i915_reg_t energy_status_all;
+};
+
+struct hwm_energy_info {
+	u32 reg_val_prev;
+	long accum_energy;			/* Accumulated energy for energy1_input */
 };
 
 struct hwm_drvdata {
 	struct i915_hwmon *hwmon;
 	struct intel_uncore *uncore;
 	struct device *hwmon_dev;
+	struct hwm_energy_info ei;		/*  Energy info for energy1_input */
 	char name[12];
 };
 
@@ -40,6 +49,7 @@ struct i915_hwmon {
 	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
 	struct hwm_reg rg;
 	int scl_shift_power;
+	int scl_shift_energy;
 };
 
 static void
@@ -98,9 +108,58 @@ hwm_field_scale_and_write(struct hwm_drvdata *ddat, i915_reg_t rgadr,
 					    bits_to_clear, bits_to_set);
 }
 
+/*
+ * hwm_energy - Obtain energy value
+ *
+ * The underlying energy hardware register is 32-bits and is subject to
+ * overflow. How long before overflow? For example, with an example
+ * scaling bit shift of 14 bits (see register *PACKAGE_POWER_SKU_UNIT) and
+ * a power draw of 1000 watts, the 32-bit counter will overflow in
+ * approximately 4.36 minutes.
+ *
+ * Examples:
+ *    1 watt:  (2^32 >> 14) /    1 W / (60 * 60 * 24) secs/day -> 3 days
+ * 1000 watts: (2^32 >> 14) / 1000 W / 60             secs/min -> 4.36 minutes
+ *
+ * The function significantly increases overflow duration (from 4.36
+ * minutes) by accumulating the energy register into a 'long' as allowed by
+ * the hwmon API. Using x86_64 128 bit arithmetic (see mul_u64_u32_shr()),
+ * a 'long' of 63 bits, SF_ENERGY of 1e6 (~20 bits) and
+ * hwmon->scl_shift_energy of 14 bits we have 57 (63 - 20 + 14) bits before
+ * energy1_input overflows. This at 1000 W is an overflow duration of 278 years.
+ */
+static void
+hwm_energy(struct hwm_drvdata *ddat, long *energy)
+{
+	struct intel_uncore *uncore = ddat->uncore;
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	struct hwm_energy_info *ei = &ddat->ei;
+	intel_wakeref_t wakeref;
+	i915_reg_t rgaddr;
+	u32 reg_val;
+
+	rgaddr = hwmon->rg.energy_status_all;
+
+	mutex_lock(&hwmon->hwmon_lock);
+
+	with_intel_runtime_pm(uncore->rpm, wakeref)
+		reg_val = intel_uncore_read(uncore, rgaddr);
+
+	if (reg_val >= ei->reg_val_prev)
+		ei->accum_energy += reg_val - ei->reg_val_prev;
+	else
+		ei->accum_energy += UINT_MAX - ei->reg_val_prev + reg_val;
+	ei->reg_val_prev = reg_val;
+
+	*energy = mul_u64_u32_shr(ei->accum_energy, SF_ENERGY,
+				  hwmon->scl_shift_energy);
+	mutex_unlock(&hwmon->hwmon_lock);
+}
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
 	NULL
 };
 
@@ -194,6 +253,33 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 	}
 }
 
+static umode_t
+hwm_energy_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	i915_reg_t rgaddr;
+
+	switch (attr) {
+	case hwmon_energy_input:
+		rgaddr = hwmon->rg.energy_status_all;
+		return i915_mmio_reg_valid(rgaddr) ? 0444 : 0;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	switch (attr) {
+	case hwmon_energy_input:
+		hwm_energy(ddat, val);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -205,6 +291,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_in_is_visible(ddat, attr);
 	case hwmon_power:
 		return hwm_power_is_visible(ddat, attr, channel);
+	case hwmon_energy:
+		return hwm_energy_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -221,6 +309,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_in_read(ddat, attr, val);
 	case hwmon_power:
 		return hwm_power_read(ddat, attr, channel, val);
+	case hwmon_energy:
+		return hwm_energy_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -256,8 +346,10 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 {
 	struct i915_hwmon *hwmon = i915->hwmon;
 	struct intel_uncore *uncore = &i915->uncore;
+	struct hwm_drvdata *ddat = &hwmon->ddat;
 	intel_wakeref_t wakeref;
 	u32 val_sku_unit = 0;
+	long energy;
 
 	/* Available for all Gen12+/dGfx */
 	hwmon->rg.gt_perf_status = GEN12_RPSTAT1;
@@ -266,10 +358,12 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 		hwmon->rg.pkg_power_sku_unit = PCU_PACKAGE_POWER_SKU_UNIT;
 		hwmon->rg.pkg_power_sku = PCU_PACKAGE_POWER_SKU;
 		hwmon->rg.pkg_rapl_limit = PCU_PACKAGE_RAPL_LIMIT;
+		hwmon->rg.energy_status_all = PCU_PACKAGE_ENERGY_STATUS;
 	} else {
 		hwmon->rg.pkg_power_sku_unit = INVALID_MMIO_REG;
 		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
 		hwmon->rg.pkg_rapl_limit = INVALID_MMIO_REG;
+		hwmon->rg.energy_status_all = INVALID_MMIO_REG;
 	}
 
 	with_intel_runtime_pm(uncore->rpm, wakeref) {
@@ -280,9 +374,17 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 		if (i915_mmio_reg_valid(hwmon->rg.pkg_power_sku_unit))
 			val_sku_unit = intel_uncore_read(uncore,
 							 hwmon->rg.pkg_power_sku_unit);
-
-		hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	}
+
+	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
+	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+
+	/*
+	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
+	 * first value of the energy register read
+	 */
+	if (i915_mmio_reg_valid(hwmon->rg.energy_status_all))
+		hwm_energy(ddat, &energy);
 }
 
 void i915_hwmon_register(struct drm_i915_private *i915)
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index d7e2e47117920..decd411c2cdd0 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -197,7 +197,9 @@
 
 #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
 #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
+#define   PKG_ENERGY_UNIT			REG_GENMASK(12, 8)
 #define   PKG_TIME_UNIT				REG_GENMASK(19, 16)
+#define PCU_PACKAGE_ENERGY_STATUS              _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x593c)
 
 #define GEN6_GT_PERF_STATUS			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5948)
 #define GEN6_RP_STATE_LIMITS			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5994)
-- 
2.38.0


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-10-13 15:45 [PATCH 0/7] drm/i915: Add HWMON support Ashutosh Dixit
                   ` (3 preceding siblings ...)
  2022-10-13 15:45 ` [PATCH 4/7] drm/i915/hwmon: Show device level energy usage Ashutosh Dixit
@ 2022-10-13 15:45 ` Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 7/7] drm/i915/hwmon: Extend power/energy for XEHPSDV Ashutosh Dixit
  6 siblings, 0 replies; 19+ messages in thread
From: Ashutosh Dixit @ 2022-10-13 15:45 UTC (permalink / raw)
  To: intel-gfx; +Cc: dri-devel, linux-hwmon, Rodrigo Vivi, Andi Shyti

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3: Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
v4: Use hwm_ prefix for static functions (Ashutosh)
v5: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v6: Change contact to intel-gfx (Rodrigo)

Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
 drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  6 ++
 3 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index aa00c558495b3..a7a6512fcc8ca 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		February 2023
 KernelVersion:	6.2
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index d8d30daa37944..2b24a7a711400 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -11,16 +11,19 @@
 #include "i915_hwmon.h"
 #include "i915_reg.h"
 #include "intel_mchbar_regs.h"
+#include "intel_pcode.h"
 #include "gt/intel_gt_regs.h"
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - voltage  - millivolts
  * - power  - microwatts
+ * - curr   - milliamperes
  * - energy - microjoules
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
+#define SF_CURR		1000
 #define SF_ENERGY	1000000
 
 struct hwm_reg {
@@ -158,11 +161,25 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
-	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
 	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
 	NULL
 };
 
+/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
+static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
+{
+	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
+				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
+}
+
+static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
+{
+	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
+				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
+}
+
 static umode_t
 hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 {
@@ -198,13 +215,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 static umode_t
 hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 {
+	struct drm_i915_private *i915 = ddat->uncore->i915;
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
 	case hwmon_power_rated_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	case hwmon_power_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
 	default:
 		return 0;
 	}
@@ -214,6 +236,8 @@ static int
 hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	int ret;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -230,6 +254,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 						hwmon->scl_shift_power,
 						SF_POWER);
 		return 0;
+	case hwmon_power_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (!(uval & POWER_SETUP_I1_WATTS))
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_POWER, POWER_SETUP_I1_SHIFT);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -239,6 +272,7 @@ static int
 hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -248,6 +282,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 					  hwmon->scl_shift_power,
 					  SF_POWER, val);
 		return 0;
+	case hwmon_power_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -280,6 +317,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	int ret;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (uval & POWER_SETUP_I1_WATTS)
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_CURR, POWER_SETUP_I1_SHIFT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
+{
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -293,6 +380,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_power_is_visible(ddat, attr, channel);
 	case hwmon_energy:
 		return hwm_energy_is_visible(ddat, attr);
+	case hwmon_curr:
+		return hwm_curr_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -311,6 +400,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_power_read(ddat, attr, channel, val);
 	case hwmon_energy:
 		return hwm_energy_read(ddat, attr, val);
+	case hwmon_curr:
+		return hwm_curr_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -325,6 +416,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_power:
 		return hwm_power_write(ddat, attr, channel, val);
+	case hwmon_curr:
+		return hwm_curr_write(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3edfbe92c6dd9..99a8535193957 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6663,6 +6663,12 @@
 #define   DG1_PCODE_STATUS			0x7E
 #define     DG1_UNCORE_GET_INIT_STATUS		0x0
 #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
+#define   PCODE_POWER_SETUP			0x7C
+#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
+#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
+#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
+#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
+#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
 /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
-- 
2.38.0


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval
  2022-10-13 15:45 [PATCH 0/7] drm/i915: Add HWMON support Ashutosh Dixit
                   ` (4 preceding siblings ...)
  2022-10-13 15:45 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Ashutosh Dixit
@ 2022-10-13 15:45 ` Ashutosh Dixit
  2022-10-13 15:45 ` [PATCH 7/7] drm/i915/hwmon: Extend power/energy for XEHPSDV Ashutosh Dixit
  6 siblings, 0 replies; 19+ messages in thread
From: Ashutosh Dixit @ 2022-10-13 15:45 UTC (permalink / raw)
  To: intel-gfx; +Cc: dri-devel, linux-hwmon, Rodrigo Vivi, Andi Shyti

Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)
v4:
  - Fixed review comments (Anshuman)
  - In hwm_power1_max_interval_store() get PKG_MAX_WIN from
    pkg_power_sku when it is valid (Ashutosh)
  - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: On some of the DGFX setups it is seen that although pkg_power_sku
    is valid the field PKG_WIN_MAX is not populated. So it is
    decided to stick to default value of PKG_WIN_MAX (Ashutosh)
v6: Change contact to intel-gfx (Rodrigo)
    Fixed variable types in hwm_power1_max_interval_store (Andi)
    Documented PKG_MAX_WIN_DEFAULT (Andi)
    Removed else in hwm_attributes_visible (Andi)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 119 +++++++++++++++++-
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   7 ++
 3 files changed, 134 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index a7a6512fcc8ca..9dc5ff14107bb 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
 Date:		February 2023
 KernelVersion:	6.2
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 2b24a7a711400..58f80380e5427 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -20,11 +20,13 @@
  * - power  - microwatts
  * - curr   - milliamperes
  * - energy - microjoules
+ * - time   - milliseconds
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
+#define SF_TIME		1000
 
 struct hwm_reg {
 	i915_reg_t gt_perf_status;
@@ -53,6 +55,7 @@ struct i915_hwmon {
 	struct hwm_reg rg;
 	int scl_shift_power;
 	int scl_shift_energy;
+	int scl_shift_time;
 };
 
 static void
@@ -159,6 +162,119 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 	mutex_unlock(&hwmon->hwmon_lock);
 }
 
+static ssize_t
+hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 r, x, y, x_w = 2; /* 2 bits */
+	u64 tau4, out;
+
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+
+	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+	/*
+	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+	 *     = (4 | x) << (y - 2)
+	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
+	 * However because y can be < 2, we compute
+	 *     tau4 = (4 | x) << y
+	 * but add 2 when doing the final right shift to account for units
+	 */
+	tau4 = ((1 << x_w) | x) << y;
+	/* val in hwmon interface units (millisec) */
+	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+hwm_power1_max_interval_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 x, y, rxy, x_w = 2; /* 2 bits */
+	u64 tau4, r, max_win;
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * Max HW supported tau in '1.x * power(2,y)' format, x = 0, y = 0x12
+	 * The hwmon->scl_shift_time default of 0xa results in a max tau of 256 seconds
+	 */
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+	/*
+	 * val must be < max in hwmon interface units. The steps below are
+	 * explained in i915_power1_max_interval_show()
+	 */
+	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+	tau4 = ((1 << x_w) | x) << y;
+	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	if (val > max_win)
+		return -EINVAL;
+
+	/* val in hw units */
+	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+	/* Convert to 1.x * power(2,y) */
+	if (!val)
+		return -EINVAL;
+	y = ilog2(val);
+	/* x = (val - (1 << y)) >> (y - 2); */
+	x = (val - (1ul << y)) << x_w >> y;
+
+	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+					    PKG_PWR_LIM_1_TIME, rxy);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+			  hwm_power1_max_interval_show,
+			  hwm_power1_max_interval_store, 0);
+
+static struct attribute *hwm_attributes[] = {
+	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
+	NULL
+};
+
+static umode_t hwm_attributes_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
+
+	return 0;
+}
+
+static const struct attribute_group hwm_attrgroup = {
+	.attrs = hwm_attributes,
+	.is_visible = hwm_attributes_visible,
+};
+
+static const struct attribute_group *hwm_groups[] = {
+	&hwm_attrgroup,
+	NULL
+};
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
@@ -471,6 +587,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 
 	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
 
 	/*
 	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
@@ -509,7 +626,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat->name,
 							 ddat,
 							 &hwm_chip_info,
-							 NULL);
+							 hwm_groups);
 	if (IS_ERR(hwmon_dev)) {
 		i915->hwmon = NULL;
 		return;
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index decd411c2cdd0..f93e9af43ac35 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -194,6 +194,9 @@
  */
 #define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
 #define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
+#define   PKG_MAX_WIN				GENMASK_ULL(54, 48)
+#define     PKG_MAX_WIN_X			GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_Y			GENMASK_ULL(52, 48)
 
 #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
 #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
@@ -212,6 +215,10 @@
 #define   RPE_MASK				REG_GENMASK(15, 8)
 #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
 #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
+#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
+#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
+#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.38.0


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 7/7] drm/i915/hwmon: Extend power/energy for XEHPSDV
  2022-10-13 15:45 [PATCH 0/7] drm/i915: Add HWMON support Ashutosh Dixit
                   ` (5 preceding siblings ...)
  2022-10-13 15:45 ` [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval Ashutosh Dixit
@ 2022-10-13 15:45 ` Ashutosh Dixit
  6 siblings, 0 replies; 19+ messages in thread
From: Ashutosh Dixit @ 2022-10-13 15:45 UTC (permalink / raw)
  To: intel-gfx; +Cc: dri-devel, linux-hwmon, Rodrigo Vivi, Andi Shyti

From: Dale B Stimson <dale.b.stimson@intel.com>

Extend hwmon power/energy for XEHPSDV especially per gt level energy
usage.

v2: Update to latest HWMON spec (Ashutosh)
v3: Fix review comments (Ashutosh)
v4: Fix review comments (Anshuman)
v5: s/hwmon_device_register_with_info/
    devm_hwmon_device_register_with_info/ (Ashutosh)
v6: Change contact to intel-gfx (Rodrigo)
    GEN12_RPSTAT1 is available for all Gen12+ (Andi)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   7 +-
 drivers/gpu/drm/i915/gt/intel_gt_regs.h       |   5 +
 drivers/gpu/drm/i915/i915_hwmon.c             | 101 +++++++++++++++++-
 3 files changed, 110 insertions(+), 3 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 9dc5ff14107bb..2d6a472eef885 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -65,6 +65,11 @@ What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
-Description:	RO. Energy input of device in microjoules.
+Description:	RO. Energy input of device or gt in microjoules.
+
+		For i915 device level hwmon devices (name "i915") this
+		reflects energy input for the entire device. For gt level
+		hwmon devices (name "i915_gtN") this reflects energy input
+		for the gt.
 
 		Only supported for particular Intel i915 graphics platforms.
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_regs.h b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
index fcf5f9012852f..30458f1cf0ddf 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_regs.h
+++ b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
@@ -1592,6 +1592,11 @@
 
 #define GEN12_SFC_DONE(n)			_MMIO(0x1cc000 + (n) * 0x1000)
 
+#define GT0_PACKAGE_ENERGY_STATUS		_MMIO(0x250004)
+#define GT0_PACKAGE_RAPL_LIMIT			_MMIO(0x250008)
+#define GT0_PACKAGE_POWER_SKU_UNIT		_MMIO(0x250068)
+#define GT0_PLATFORM_ENERGY_STATUS		_MMIO(0x25006c)
+
 /*
  * Standalone Media's non-engine GT registers are located at their regular GT
  * offsets plus 0x380000.  This extra offset is stored inside the intel_uncore
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 58f80380e5427..9e97814930254 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -12,6 +12,7 @@
 #include "i915_reg.h"
 #include "intel_mchbar_regs.h"
 #include "intel_pcode.h"
+#include "gt/intel_gt.h"
 #include "gt/intel_gt_regs.h"
 
 /*
@@ -34,6 +35,7 @@ struct hwm_reg {
 	i915_reg_t pkg_power_sku;
 	i915_reg_t pkg_rapl_limit;
 	i915_reg_t energy_status_all;
+	i915_reg_t energy_status_tile;
 };
 
 struct hwm_energy_info {
@@ -47,10 +49,12 @@ struct hwm_drvdata {
 	struct device *hwmon_dev;
 	struct hwm_energy_info ei;		/*  Energy info for energy1_input */
 	char name[12];
+	int gt_n;
 };
 
 struct i915_hwmon {
 	struct hwm_drvdata ddat;
+	struct hwm_drvdata ddat_gt[I915_MAX_GT];
 	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
 	struct hwm_reg rg;
 	int scl_shift_power;
@@ -144,7 +148,10 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 	i915_reg_t rgaddr;
 	u32 reg_val;
 
-	rgaddr = hwmon->rg.energy_status_all;
+	if (ddat->gt_n >= 0)
+		rgaddr = hwmon->rg.energy_status_tile;
+	else
+		rgaddr = hwmon->rg.energy_status_all;
 
 	mutex_lock(&hwmon->hwmon_lock);
 
@@ -283,6 +290,11 @@ static const struct hwmon_channel_info *hwm_info[] = {
 	NULL
 };
 
+static const struct hwmon_channel_info *hwm_gt_info[] = {
+	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	NULL
+};
+
 /* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
 static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
 {
@@ -414,7 +426,10 @@ hwm_energy_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 
 	switch (attr) {
 	case hwmon_energy_input:
-		rgaddr = hwmon->rg.energy_status_all;
+		if (ddat->gt_n >= 0)
+			rgaddr = hwmon->rg.energy_status_tile;
+		else
+			rgaddr = hwmon->rg.energy_status_all;
 		return i915_mmio_reg_valid(rgaddr) ? 0444 : 0;
 	default:
 		return 0;
@@ -550,6 +565,44 @@ static const struct hwmon_chip_info hwm_chip_info = {
 	.info = hwm_info,
 };
 
+static umode_t
+hwm_gt_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+		  u32 attr, int channel)
+{
+	struct hwm_drvdata *ddat = (struct hwm_drvdata *)drvdata;
+
+	switch (type) {
+	case hwmon_energy:
+		return hwm_energy_is_visible(ddat, attr);
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_gt_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+	    int channel, long *val)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_energy:
+		return hwm_energy_read(ddat, attr, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_ops hwm_gt_ops = {
+	.is_visible = hwm_gt_is_visible,
+	.read = hwm_gt_read,
+};
+
+static const struct hwmon_chip_info hwm_gt_chip_info = {
+	.ops = &hwm_gt_ops,
+	.info = hwm_gt_info,
+};
+
 static void
 hwm_get_preregistration_info(struct drm_i915_private *i915)
 {
@@ -558,7 +611,9 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 	struct hwm_drvdata *ddat = &hwmon->ddat;
 	intel_wakeref_t wakeref;
 	u32 val_sku_unit = 0;
+	struct intel_gt *gt;
 	long energy;
+	int i;
 
 	/* Available for all Gen12+/dGfx */
 	hwmon->rg.gt_perf_status = GEN12_RPSTAT1;
@@ -568,11 +623,19 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 		hwmon->rg.pkg_power_sku = PCU_PACKAGE_POWER_SKU;
 		hwmon->rg.pkg_rapl_limit = PCU_PACKAGE_RAPL_LIMIT;
 		hwmon->rg.energy_status_all = PCU_PACKAGE_ENERGY_STATUS;
+		hwmon->rg.energy_status_tile = INVALID_MMIO_REG;
+	} else if (IS_XEHPSDV(i915)) {
+		hwmon->rg.pkg_power_sku_unit = GT0_PACKAGE_POWER_SKU_UNIT;
+		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
+		hwmon->rg.pkg_rapl_limit = GT0_PACKAGE_RAPL_LIMIT;
+		hwmon->rg.energy_status_all = GT0_PLATFORM_ENERGY_STATUS;
+		hwmon->rg.energy_status_tile = GT0_PACKAGE_ENERGY_STATUS;
 	} else {
 		hwmon->rg.pkg_power_sku_unit = INVALID_MMIO_REG;
 		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
 		hwmon->rg.pkg_rapl_limit = INVALID_MMIO_REG;
 		hwmon->rg.energy_status_all = INVALID_MMIO_REG;
+		hwmon->rg.energy_status_tile = INVALID_MMIO_REG;
 	}
 
 	with_intel_runtime_pm(uncore->rpm, wakeref) {
@@ -595,6 +658,10 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 	 */
 	if (i915_mmio_reg_valid(hwmon->rg.energy_status_all))
 		hwm_energy(ddat, &energy);
+	if (i915_mmio_reg_valid(hwmon->rg.energy_status_tile)) {
+		for_each_gt(gt, i915, i)
+			hwm_energy(&hwmon->ddat_gt[i], &energy);
+	}
 }
 
 void i915_hwmon_register(struct drm_i915_private *i915)
@@ -603,6 +670,9 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	struct i915_hwmon *hwmon;
 	struct device *hwmon_dev;
 	struct hwm_drvdata *ddat;
+	struct hwm_drvdata *ddat_gt;
+	struct intel_gt *gt;
+	int i;
 
 	/* hwmon is available only for dGfx */
 	if (!IS_DGFX(i915))
@@ -619,6 +689,16 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	ddat->hwmon = hwmon;
 	ddat->uncore = &i915->uncore;
 	snprintf(ddat->name, sizeof(ddat->name), "i915");
+	ddat->gt_n = -1;
+
+	for_each_gt(gt, i915, i) {
+		ddat_gt = hwmon->ddat_gt + i;
+
+		ddat_gt->hwmon = hwmon;
+		ddat_gt->uncore = gt->uncore;
+		snprintf(ddat_gt->name, sizeof(ddat_gt->name), "i915_gt%u", i);
+		ddat_gt->gt_n = i;
+	}
 
 	hwm_get_preregistration_info(i915);
 
@@ -633,6 +713,23 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	}
 
 	ddat->hwmon_dev = hwmon_dev;
+
+	for_each_gt(gt, i915, i) {
+		ddat_gt = hwmon->ddat_gt + i;
+		/*
+		 * Create per-gt directories only if a per-gt attribute is
+		 * visible. Currently this is only energy
+		 */
+		if (!hwm_gt_is_visible(ddat_gt, hwmon_energy, hwmon_energy_input, 0))
+			continue;
+
+		hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat_gt->name,
+								 ddat_gt,
+								 &hwm_gt_chip_info,
+								 NULL);
+		if (!IS_ERR(hwmon_dev))
+			ddat_gt->hwmon_dev = hwmon_dev;
+	}
 }
 
 void i915_hwmon_unregister(struct drm_i915_private *i915)
-- 
2.38.0


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-09-27  5:50 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
@ 2022-09-27  5:50 ` Badal Nilawar
  0 siblings, 0 replies; 19+ messages in thread
From: Badal Nilawar @ 2022-09-27  5:50 UTC (permalink / raw)
  To: intel-gfx
  Cc: ashutosh.dixit, riana.tauro, anshuman.gupta, jon.ewins,
	linux-hwmon, dri-devel, andi.shyti, tvrtko.ursulin

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3: Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
v4: Use hwm_ prefix for static functions (Ashutosh)
v5: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)

Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
 drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  6 ++
 3 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 7525db243d74..f9d6d3b08bba 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		February 2023
 KernelVersion:	6.2
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 9a49521b358a..2394fa789793 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -11,16 +11,19 @@
 #include "i915_hwmon.h"
 #include "i915_reg.h"
 #include "intel_mchbar_regs.h"
+#include "intel_pcode.h"
 #include "gt/intel_gt_regs.h"
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - voltage  - millivolts
  * - power  - microwatts
+ * - curr   - milliamperes
  * - energy - microjoules
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
+#define SF_CURR		1000
 #define SF_ENERGY	1000000
 
 struct hwm_reg {
@@ -160,11 +163,25 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
-	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
 	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
 	NULL
 };
 
+/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
+static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
+{
+	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
+				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
+}
+
+static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
+{
+	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
+				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
+}
+
 static umode_t
 hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 {
@@ -198,13 +215,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 static umode_t
 hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 {
+	struct drm_i915_private *i915 = ddat->uncore->i915;
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
 	case hwmon_power_rated_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	case hwmon_power_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
 	default:
 		return 0;
 	}
@@ -214,6 +236,8 @@ static int
 hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	int ret;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -230,6 +254,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 						hwmon->scl_shift_power,
 						SF_POWER);
 		return 0;
+	case hwmon_power_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (!(uval & POWER_SETUP_I1_WATTS))
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_POWER, POWER_SETUP_I1_SHIFT);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -239,6 +272,7 @@ static int
 hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -248,6 +282,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 					  hwmon->scl_shift_power,
 					  SF_POWER, val);
 		return 0;
+	case hwmon_power_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -279,6 +316,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	int ret;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (uval & POWER_SETUP_I1_WATTS)
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_CURR, POWER_SETUP_I1_SHIFT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
+{
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -292,6 +379,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_power_is_visible(ddat, attr, channel);
 	case hwmon_energy:
 		return hwm_energy_is_visible(ddat, attr);
+	case hwmon_curr:
+		return hwm_curr_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -310,6 +399,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_power_read(ddat, attr, channel, val);
 	case hwmon_energy:
 		return hwm_energy_read(ddat, attr, val);
+	case hwmon_curr:
+		return hwm_curr_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -324,6 +415,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_power:
 		return hwm_power_write(ddat, attr, channel, val);
+	case hwmon_curr:
+		return hwm_curr_write(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5003a5ffbc6a..ff3b352c51cd 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6655,6 +6655,12 @@
 #define   DG1_PCODE_STATUS			0x7E
 #define     DG1_UNCORE_GET_INIT_STATUS		0x0
 #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
+#define   PCODE_POWER_SETUP			0x7C
+#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
+#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
+#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
+#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
+#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
 /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-09-26 17:52 [PATCH 0/7] Add HWMON support Badal Nilawar
@ 2022-09-26 17:52 ` Badal Nilawar
  0 siblings, 0 replies; 19+ messages in thread
From: Badal Nilawar @ 2022-09-26 17:52 UTC (permalink / raw)
  To: intel-gfx
  Cc: ashutosh.dixit, riana.tauro, anshuman.gupta, jon.ewins,
	linux-hwmon, dri-devel, andi.shyti, tvrtko.ursulin

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3: Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
v4: Use hwm_ prefix for static functions (Ashutosh)
v5: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)

Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
 drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  6 ++
 3 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 7525db243d74..f9d6d3b08bba 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		February 2023
 KernelVersion:	6.2
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 9a49521b358a..2394fa789793 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -11,16 +11,19 @@
 #include "i915_hwmon.h"
 #include "i915_reg.h"
 #include "intel_mchbar_regs.h"
+#include "intel_pcode.h"
 #include "gt/intel_gt_regs.h"
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - voltage  - millivolts
  * - power  - microwatts
+ * - curr   - milliamperes
  * - energy - microjoules
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
+#define SF_CURR		1000
 #define SF_ENERGY	1000000
 
 struct hwm_reg {
@@ -160,11 +163,25 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
-	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
 	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
 	NULL
 };
 
+/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
+static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
+{
+	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
+				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
+}
+
+static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
+{
+	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
+				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
+}
+
 static umode_t
 hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 {
@@ -198,13 +215,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 static umode_t
 hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 {
+	struct drm_i915_private *i915 = ddat->uncore->i915;
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
 	case hwmon_power_rated_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	case hwmon_power_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
 	default:
 		return 0;
 	}
@@ -214,6 +236,8 @@ static int
 hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	int ret;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -230,6 +254,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 						hwmon->scl_shift_power,
 						SF_POWER);
 		return 0;
+	case hwmon_power_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (!(uval & POWER_SETUP_I1_WATTS))
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_POWER, POWER_SETUP_I1_SHIFT);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -239,6 +272,7 @@ static int
 hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -248,6 +282,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 					  hwmon->scl_shift_power,
 					  SF_POWER, val);
 		return 0;
+	case hwmon_power_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -279,6 +316,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	int ret;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (uval & POWER_SETUP_I1_WATTS)
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_CURR, POWER_SETUP_I1_SHIFT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
+{
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -292,6 +379,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_power_is_visible(ddat, attr, channel);
 	case hwmon_energy:
 		return hwm_energy_is_visible(ddat, attr);
+	case hwmon_curr:
+		return hwm_curr_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -310,6 +399,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_power_read(ddat, attr, channel, val);
 	case hwmon_energy:
 		return hwm_energy_read(ddat, attr, val);
+	case hwmon_curr:
+		return hwm_curr_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -324,6 +415,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_power:
 		return hwm_power_write(ddat, attr, channel, val);
+	case hwmon_curr:
+		return hwm_curr_write(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5003a5ffbc6a..ff3b352c51cd 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6655,6 +6655,12 @@
 #define   DG1_PCODE_STATUS			0x7E
 #define     DG1_UNCORE_GET_INIT_STATUS		0x0
 #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
+#define   PCODE_POWER_SETUP			0x7C
+#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
+#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
+#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
+#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
+#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
 /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-09-23 19:56 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
@ 2022-09-23 19:56 ` Badal Nilawar
  0 siblings, 0 replies; 19+ messages in thread
From: Badal Nilawar @ 2022-09-23 19:56 UTC (permalink / raw)
  To: intel-gfx
  Cc: ashutosh.dixit, riana.tauro, anshuman.gupta, jon.ewins,
	linux-hwmon, dri-devel, andi.shyti, tvrtko.ursulin

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3: Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
v4: Use hwm_ prefix for static functions (Ashutosh)
v5: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)

Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
 drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  6 ++
 3 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 7525db243d74..f9d6d3b08bba 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		February 2023
 KernelVersion:	6.2
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 60da956fae0e..f743ac5c59c4 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -11,16 +11,19 @@
 #include "i915_hwmon.h"
 #include "i915_reg.h"
 #include "intel_mchbar_regs.h"
+#include "intel_pcode.h"
 #include "gt/intel_gt_regs.h"
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - voltage  - millivolts
  * - power  - microwatts
+ * - curr   - milliamperes
  * - energy - microjoules
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
+#define SF_CURR		1000
 #define SF_ENERGY	1000000
 
 struct hwm_reg {
@@ -160,11 +163,25 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
-	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
 	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
 	NULL
 };
 
+/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
+static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
+{
+	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
+				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
+}
+
+static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
+{
+	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
+				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
+}
+
 static umode_t
 hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 {
@@ -198,13 +215,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 static umode_t
 hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 {
+	struct drm_i915_private *i915 = ddat->uncore->i915;
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
 	case hwmon_power_rated_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	case hwmon_power_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
 	default:
 		return 0;
 	}
@@ -214,6 +236,8 @@ static int
 hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	int ret;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -230,6 +254,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 						hwmon->scl_shift_power,
 						SF_POWER);
 		return 0;
+	case hwmon_power_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (!(uval & POWER_SETUP_I1_WATTS))
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_POWER, POWER_SETUP_I1_SHIFT);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -239,6 +272,7 @@ static int
 hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -248,6 +282,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 					  hwmon->scl_shift_power,
 					  SF_POWER, val);
 		return 0;
+	case hwmon_power_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -279,6 +316,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	int ret;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (uval & POWER_SETUP_I1_WATTS)
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_CURR, POWER_SETUP_I1_SHIFT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
+{
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -292,6 +379,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_power_is_visible(ddat, attr, channel);
 	case hwmon_energy:
 		return hwm_energy_is_visible(ddat, attr);
+	case hwmon_curr:
+		return hwm_curr_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -310,6 +399,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_power_read(ddat, attr, channel, val);
 	case hwmon_energy:
 		return hwm_energy_read(ddat, attr, val);
+	case hwmon_curr:
+		return hwm_curr_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -324,6 +415,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_power:
 		return hwm_power_write(ddat, attr, channel, val);
+	case hwmon_curr:
+		return hwm_curr_write(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d340737b10be..335bb5f1dc83 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6650,6 +6650,12 @@
 #define   DG1_PCODE_STATUS			0x7E
 #define     DG1_UNCORE_GET_INIT_STATUS		0x0
 #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
+#define   PCODE_POWER_SETUP			0x7C
+#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
+#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
+#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
+#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
+#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
 /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* Re: [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-09-22  3:17     ` Dixit, Ashutosh
@ 2022-09-22  5:24       ` Gupta, Anshuman
  0 siblings, 0 replies; 19+ messages in thread
From: Gupta, Anshuman @ 2022-09-22  5:24 UTC (permalink / raw)
  To: Dixit, Ashutosh
  Cc: Badal Nilawar, intel-gfx, riana.tauro, jon.ewins, linux-hwmon, dri-devel



On 9/22/2022 8:47 AM, Dixit, Ashutosh wrote:
> On Wed, 21 Sep 2022 08:07:15 -0700, Gupta, Anshuman wrote:
>>
> 
> Hi Anshuman,
> 
>>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>>> index 55c35903adca..956e5298ef1e 100644
>>> --- a/drivers/gpu/drm/i915/i915_reg.h
>>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>>> @@ -6644,6 +6644,12 @@
>>>    #define   DG1_PCODE_STATUS			0x7E
>>>    #define     DG1_UNCORE_GET_INIT_STATUS		0x0
>>>    #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
>>> +#define   PCODE_POWER_SETUP			0x7C
>>> +#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
>>> +#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
>>> +#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
>>> +#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
>> Could please add some comment to explain, why POWER_SETUP_I1_SHIFT  = 6,
>> what is excatly 10.6 fixed point format ?
>> With that.
>> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
> 
> 10.6 fixed point format means a 16 bit number is represented as x.y where x
> are the top 10 bits and y are the bottom 6 bits. The float value of this 16
> bit number is (x + (y / 2^6)), so (x + (y / 64)). For example the number
> 0x8008 will have the value (1 * 2^9 + 8 / 2^6) == 512.125. Note that the
> hexadecimal number 0x8008 == 32776 and 512.125 == 32776 / 64 which is why
> POWER_SETUP_I1_SHIFT is 6 (2^6 == 64).
> 
> Similarly, the 8.8 fixed point format is explained in
> gt/intel_gt_sysfs_pm.c. Do you think this needs a comment? I thought "10.6
> fixed point format" is a sufficient hint (fixed point numbers are fairly
> well known).
> 
> An even trickier data format is in the patch "drm/i915/hwmon: Expose
> power1_max_interval" in hwm_power1_max_interval_show() but I think I have a
> long comment there.
Thanks for explaining this, i was unaware of fixed point representation.
My RB can can be used without any change.
Br,
Anshuman.

> 
> Thanks.
> --
> Ashutosh

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-09-21 15:07   ` Gupta, Anshuman
@ 2022-09-22  3:17     ` Dixit, Ashutosh
  2022-09-22  5:24       ` Gupta, Anshuman
  0 siblings, 1 reply; 19+ messages in thread
From: Dixit, Ashutosh @ 2022-09-22  3:17 UTC (permalink / raw)
  To: Gupta, Anshuman
  Cc: Badal Nilawar, intel-gfx, riana.tauro, jon.ewins, linux-hwmon, dri-devel

On Wed, 21 Sep 2022 08:07:15 -0700, Gupta, Anshuman wrote:
>

Hi Anshuman,

> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 55c35903adca..956e5298ef1e 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -6644,6 +6644,12 @@
> >   #define   DG1_PCODE_STATUS			0x7E
> >   #define     DG1_UNCORE_GET_INIT_STATUS		0x0
> >   #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
> > +#define   PCODE_POWER_SETUP			0x7C
> > +#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
> > +#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
> > +#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
> > +#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
> Could please add some comment to explain, why POWER_SETUP_I1_SHIFT  = 6,
> what is excatly 10.6 fixed point format ?
> With that.
> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>

10.6 fixed point format means a 16 bit number is represented as x.y where x
are the top 10 bits and y are the bottom 6 bits. The float value of this 16
bit number is (x + (y / 2^6)), so (x + (y / 64)). For example the number
0x8008 will have the value (1 * 2^9 + 8 / 2^6) == 512.125. Note that the
hexadecimal number 0x8008 == 32776 and 512.125 == 32776 / 64 which is why
POWER_SETUP_I1_SHIFT is 6 (2^6 == 64).

Similarly, the 8.8 fixed point format is explained in
gt/intel_gt_sysfs_pm.c. Do you think this needs a comment? I thought "10.6
fixed point format" is a sufficient hint (fixed point numbers are fairly
well known).

An even trickier data format is in the patch "drm/i915/hwmon: Expose
power1_max_interval" in hwm_power1_max_interval_show() but I think I have a
long comment there.

Thanks.
--
Ashutosh

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-09-16 15:00 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Badal Nilawar
@ 2022-09-21 15:07   ` Gupta, Anshuman
  2022-09-22  3:17     ` Dixit, Ashutosh
  0 siblings, 1 reply; 19+ messages in thread
From: Gupta, Anshuman @ 2022-09-21 15:07 UTC (permalink / raw)
  To: Badal Nilawar, intel-gfx
  Cc: ashutosh.dixit, riana.tauro, jon.ewins, linux-hwmon, dri-devel



On 9/16/2022 8:30 PM, Badal Nilawar wrote:
> From: Ashutosh Dixit <ashutosh.dixit@intel.com>
> 
> Expose the card reactive critical (I1) power. I1 is exposed as
> power1_crit in microwatts (typically for client products) or as
> curr1_crit in milliamperes (typically for server).
> 
> v2: Add curr1_crit functionality (Ashutosh)
> v3:
>    - Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
> v4: Use hwm_ prefix for static functions (Ashutosh)
> v5: Updated date, kernel version in documentation
> 
> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
>   .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
>   drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
>   drivers/gpu/drm/i915/i915_reg.h               |  6 ++
>   3 files changed, 126 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> index 94101f818a70..cc70596fff44 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> @@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
>   
>   		Only supported for particular Intel i915 graphics platforms.
>   
> +What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
> +Date:		September 2022
> +KernelVersion:	6
> +Contact:	dri-devel@lists.freedesktop.org
> +Description:	RW. Card reactive critical (I1) power limit in microwatts.
> +
> +		Card reactive critical (I1) power limit in microwatts is exposed
> +		for client products. The power controller will throttle the
> +		operating frequency if the power averaged over a window exceeds
> +		this limit.
> +
> +		Only supported for particular Intel i915 graphics platforms.
> +
> +What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
> +Date:		September 2022
> +KernelVersion:	6
> +Contact:	dri-devel@lists.freedesktop.org
> +Description:	RW. Card reactive critical (I1) power limit in milliamperes.
> +
> +		Card reactive critical (I1) power limit in milliamperes is
> +		exposed for server products. The power controller will throttle
> +		the operating frequency if the power averaged over a window
> +		exceeds this limit.
> +
> +		Only supported for particular Intel i915 graphics platforms.
> +
>   What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
>   Date:		September 2022
>   KernelVersion:	6
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index a42cfad78bef..bd9ba312c474 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -11,16 +11,19 @@
>   #include "i915_hwmon.h"
>   #include "i915_reg.h"
>   #include "intel_mchbar_regs.h"
> +#include "intel_pcode.h"
>   #include "gt/intel_gt_regs.h"
>   
>   /*
>    * SF_* - scale factors for particular quantities according to hwmon spec.
>    * - voltage  - millivolts
>    * - power  - microwatts
> + * - curr   - milliamperes
>    * - energy - microjoules
>    */
>   #define SF_VOLTAGE	1000
>   #define SF_POWER	1000000
> +#define SF_CURR		1000
>   #define SF_ENERGY	1000000
>   
>   struct hwm_reg {
> @@ -160,11 +163,25 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
>   
>   static const struct hwmon_channel_info *hwm_info[] = {
>   	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
> -	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
> +	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
>   	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
> +	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
>   	NULL
>   };
>   
> +/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
> +static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
> +{
> +	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
> +				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
> +}
> +
> +static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
> +{
> +	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
> +				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
> +}
> +
>   static umode_t
>   hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
>   {
> @@ -198,13 +215,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
>   static umode_t
>   hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
>   {
> +	struct drm_i915_private *i915 = ddat->uncore->i915;
>   	struct i915_hwmon *hwmon = ddat->hwmon;
> +	u32 uval;
>   
>   	switch (attr) {
>   	case hwmon_power_max:
>   		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
>   	case hwmon_power_rated_max:
>   		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
> +	case hwmon_power_crit:
> +		return (hwm_pcode_read_i1(i915, &uval) ||
> +			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
>   	default:
>   		return 0;
>   	}
> @@ -214,6 +236,8 @@ static int
>   hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
>   {
>   	struct i915_hwmon *hwmon = ddat->hwmon;
> +	int ret;
> +	u32 uval;
>   
>   	switch (attr) {
>   	case hwmon_power_max:
> @@ -230,6 +254,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
>   						hwmon->scl_shift_power,
>   						SF_POWER);
>   		return 0;
> +	case hwmon_power_crit:
> +		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
> +		if (ret)
> +			return ret;
> +		if (!(uval & POWER_SETUP_I1_WATTS))
> +			return -ENODEV;
> +		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
> +				       SF_POWER, POWER_SETUP_I1_SHIFT);
> +		return 0;
>   	default:
>   		return -EOPNOTSUPP;
>   	}
> @@ -239,6 +272,7 @@ static int
>   hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
>   {
>   	struct i915_hwmon *hwmon = ddat->hwmon;
> +	u32 uval;
>   
>   	switch (attr) {
>   	case hwmon_power_max:
> @@ -248,6 +282,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
>   					  hwmon->scl_shift_power,
>   					  SF_POWER, val);
>   		return 0;
> +	case hwmon_power_crit:
> +		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
> +		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
>   	default:
>   		return -EOPNOTSUPP;
>   	}
> @@ -279,6 +316,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
>   	}
>   }
>   
> +static umode_t
> +hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
> +{
> +	struct drm_i915_private *i915 = ddat->uncore->i915;
> +	u32 uval;
> +
> +	switch (attr) {
> +	case hwmon_curr_crit:
> +		return (hwm_pcode_read_i1(i915, &uval) ||
> +			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static int
> +hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
> +{
> +	int ret;
> +	u32 uval;
> +
> +	switch (attr) {
> +	case hwmon_curr_crit:
> +		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
> +		if (ret)
> +			return ret;
> +		if (uval & POWER_SETUP_I1_WATTS)
> +			return -ENODEV;
> +		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
> +				       SF_CURR, POWER_SETUP_I1_SHIFT);
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int
> +hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
> +{
> +	u32 uval;
> +
> +	switch (attr) {
> +	case hwmon_curr_crit:
> +		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
> +		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
>   static umode_t
>   hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
>   	       u32 attr, int channel)
> @@ -292,6 +379,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
>   		return hwm_power_is_visible(ddat, attr, channel);
>   	case hwmon_energy:
>   		return hwm_energy_is_visible(ddat, attr);
> +	case hwmon_curr:
> +		return hwm_curr_is_visible(ddat, attr);
>   	default:
>   		return 0;
>   	}
> @@ -310,6 +399,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>   		return hwm_power_read(ddat, attr, channel, val);
>   	case hwmon_energy:
>   		return hwm_energy_read(ddat, attr, val);
> +	case hwmon_curr:
> +		return hwm_curr_read(ddat, attr, val);
>   	default:
>   		return -EOPNOTSUPP;
>   	}
> @@ -324,6 +415,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>   	switch (type) {
>   	case hwmon_power:
>   		return hwm_power_write(ddat, attr, channel, val);
> +	case hwmon_curr:
> +		return hwm_curr_write(ddat, attr, val);
>   	default:
>   		return -EOPNOTSUPP;
>   	}
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 55c35903adca..956e5298ef1e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6644,6 +6644,12 @@
>   #define   DG1_PCODE_STATUS			0x7E
>   #define     DG1_UNCORE_GET_INIT_STATUS		0x0
>   #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
> +#define   PCODE_POWER_SETUP			0x7C
> +#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
> +#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
> +#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
> +#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
Could please add some comment to explain, why POWER_SETUP_I1_SHIFT  = 6, 
what is excatly 10.6 fixed point format ?
With that.
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>

> +#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
>   #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
>   #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
>   /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */

^ permalink raw reply	[flat|nested] 19+ messages in thread

* [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-09-16 15:00 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
@ 2022-09-16 15:00 ` Badal Nilawar
  2022-09-21 15:07   ` Gupta, Anshuman
  0 siblings, 1 reply; 19+ messages in thread
From: Badal Nilawar @ 2022-09-16 15:00 UTC (permalink / raw)
  To: intel-gfx
  Cc: ashutosh.dixit, riana.tauro, anshuman.gupta, jon.ewins,
	linux-hwmon, dri-devel

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3:
  - Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
v4: Use hwm_ prefix for static functions (Ashutosh)
v5: Updated date, kernel version in documentation

Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
 drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  6 ++
 3 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 94101f818a70..cc70596fff44 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		September 2022
+KernelVersion:	6
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		September 2022
+KernelVersion:	6
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		September 2022
 KernelVersion:	6
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index a42cfad78bef..bd9ba312c474 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -11,16 +11,19 @@
 #include "i915_hwmon.h"
 #include "i915_reg.h"
 #include "intel_mchbar_regs.h"
+#include "intel_pcode.h"
 #include "gt/intel_gt_regs.h"
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - voltage  - millivolts
  * - power  - microwatts
+ * - curr   - milliamperes
  * - energy - microjoules
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
+#define SF_CURR		1000
 #define SF_ENERGY	1000000
 
 struct hwm_reg {
@@ -160,11 +163,25 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
-	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
 	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
 	NULL
 };
 
+/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
+static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
+{
+	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
+				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
+}
+
+static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
+{
+	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
+				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
+}
+
 static umode_t
 hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 {
@@ -198,13 +215,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 static umode_t
 hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 {
+	struct drm_i915_private *i915 = ddat->uncore->i915;
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
 	case hwmon_power_rated_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	case hwmon_power_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
 	default:
 		return 0;
 	}
@@ -214,6 +236,8 @@ static int
 hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	int ret;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -230,6 +254,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 						hwmon->scl_shift_power,
 						SF_POWER);
 		return 0;
+	case hwmon_power_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (!(uval & POWER_SETUP_I1_WATTS))
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_POWER, POWER_SETUP_I1_SHIFT);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -239,6 +272,7 @@ static int
 hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -248,6 +282,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 					  hwmon->scl_shift_power,
 					  SF_POWER, val);
 		return 0;
+	case hwmon_power_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -279,6 +316,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	int ret;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (uval & POWER_SETUP_I1_WATTS)
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_CURR, POWER_SETUP_I1_SHIFT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
+{
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -292,6 +379,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_power_is_visible(ddat, attr, channel);
 	case hwmon_energy:
 		return hwm_energy_is_visible(ddat, attr);
+	case hwmon_curr:
+		return hwm_curr_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -310,6 +399,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_power_read(ddat, attr, channel, val);
 	case hwmon_energy:
 		return hwm_energy_read(ddat, attr, val);
+	case hwmon_curr:
+		return hwm_curr_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -324,6 +415,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_power:
 		return hwm_power_write(ddat, attr, channel, val);
+	case hwmon_curr:
+		return hwm_curr_write(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 55c35903adca..956e5298ef1e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6644,6 +6644,12 @@
 #define   DG1_PCODE_STATUS			0x7E
 #define     DG1_UNCORE_GET_INIT_STATUS		0x0
 #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
+#define   PCODE_POWER_SETUP			0x7C
+#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
+#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
+#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
+#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
+#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
 /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-08-25 13:21 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
@ 2022-08-25 13:21 ` Badal Nilawar
  0 siblings, 0 replies; 19+ messages in thread
From: Badal Nilawar @ 2022-08-25 13:21 UTC (permalink / raw)
  To: intel-gfx
  Cc: ashutosh.dixit, riana.tauro, anshuman.gupta, jon.ewins, linux-hwmon

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3:
  - Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
  - Update date and kernel version in Documentation.
v4: Use hwm_ prefix for static functions (Ashutosh)

Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
 drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  6 ++
 3 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 03d71c6869d3..bb1101757154 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		June 2022
 KernelVersion:	5.19
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index e35f125be242..e476c8a9351b 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -11,14 +11,17 @@
 #include "i915_hwmon.h"
 #include "i915_reg.h"
 #include "intel_mchbar_regs.h"
+#include "intel_pcode.h"
 #include "gt/intel_gt_regs.h"
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - power  - microwatts
+ * - curr   - milliamperes
  * - energy - microjoules
  */
 #define SF_POWER	1000000
+#define SF_CURR		1000
 #define SF_ENERGY	1000000
 
 #define FIELD_SHIFT(__mask)				    \
@@ -176,11 +179,25 @@ i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
 
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
-	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
 	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
 	NULL
 };
 
+/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
+static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
+{
+	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
+				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
+}
+
+static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
+{
+	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
+				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
+}
+
 static umode_t
 hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 {
@@ -214,13 +231,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 static umode_t
 hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 {
+	struct drm_i915_private *i915 = ddat->uncore->i915;
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
 	case hwmon_power_rated_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	case hwmon_power_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
 	default:
 		return 0;
 	}
@@ -230,6 +252,8 @@ static int
 hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	int ret;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -248,6 +272,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 						hwmon->scl_shift_power,
 						SF_POWER);
 		return 0;
+	case hwmon_power_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (!(uval & POWER_SETUP_I1_WATTS))
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_POWER, POWER_SETUP_I1_SHIFT);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -257,6 +290,7 @@ static int
 hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -267,6 +301,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 					  hwmon->scl_shift_power,
 					  SF_POWER, val);
 		return 0;
+	case hwmon_power_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -298,6 +335,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	int ret;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (uval & POWER_SETUP_I1_WATTS)
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_CURR, POWER_SETUP_I1_SHIFT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
+{
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -311,6 +398,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_power_is_visible(ddat, attr, channel);
 	case hwmon_energy:
 		return hwm_energy_is_visible(ddat, attr);
+	case hwmon_curr:
+		return hwm_curr_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -329,6 +418,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_power_read(ddat, attr, channel, val);
 	case hwmon_energy:
 		return hwm_energy_read(ddat, attr, val);
+	case hwmon_curr:
+		return hwm_curr_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -343,6 +434,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_power:
 		return hwm_power_write(ddat, attr, channel, val);
+	case hwmon_curr:
+		return hwm_curr_write(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index fd13411a28d9..6f72e7285e64 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6676,6 +6676,12 @@
 #define   DG1_PCODE_STATUS			0x7E
 #define     DG1_UNCORE_GET_INIT_STATUS		0x0
 #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
+#define   PCODE_POWER_SETUP			0x7C
+#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
+#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
+#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
+#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
+#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
 /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-08-18 19:38 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
@ 2022-08-18 19:38 ` Badal Nilawar
  0 siblings, 0 replies; 19+ messages in thread
From: Badal Nilawar @ 2022-08-18 19:38 UTC (permalink / raw)
  To: intel-gfx
  Cc: linux-hwmon, ashutosh.dixit, riana.tauro, anshuman.gupta,
	jon.ewins, linux

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3:
  - Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
  - Update date and kernel version in Documentation.
v4: Use hwm_ prefix for static functions (Ashutosh)

Acked-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
 drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  6 ++
 3 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 03d71c6869d3..bb1101757154 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		June 2022
 KernelVersion:	5.19
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index d6334f829c8c..1eedcefbf511 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -10,14 +10,17 @@
 #include "i915_drv.h"
 #include "i915_hwmon.h"
 #include "intel_mchbar_regs.h"
+#include "intel_pcode.h"
 #include "gt/intel_gt_regs.h"
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - power  - microwatts
+ * - curr   - milliamperes
  * - energy - microjoules
  */
 #define SF_POWER	1000000
+#define SF_CURR		1000
 #define SF_ENERGY	1000000
 
 #define FIELD_SHIFT(__mask)				    \
@@ -175,11 +178,25 @@ i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
 
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
-	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
 	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
 	NULL
 };
 
+/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
+static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
+{
+	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
+				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
+}
+
+static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
+{
+	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
+				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
+}
+
 static umode_t
 hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 {
@@ -213,13 +230,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 static umode_t
 hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 {
+	struct drm_i915_private *i915 = ddat->uncore->i915;
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
 	case hwmon_power_rated_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	case hwmon_power_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
 	default:
 		return 0;
 	}
@@ -229,6 +251,8 @@ static int
 hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	int ret;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -247,6 +271,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 						hwmon->scl_shift_power,
 						SF_POWER);
 		return 0;
+	case hwmon_power_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (!(uval & POWER_SETUP_I1_WATTS))
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_POWER, POWER_SETUP_I1_SHIFT);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -256,6 +289,7 @@ static int
 hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -266,6 +300,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 					  hwmon->scl_shift_power,
 					  SF_POWER, val);
 		return 0;
+	case hwmon_power_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -297,6 +334,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	int ret;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (uval & POWER_SETUP_I1_WATTS)
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_CURR, POWER_SETUP_I1_SHIFT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
+{
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -310,6 +397,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_power_is_visible(ddat, attr, channel);
 	case hwmon_energy:
 		return hwm_energy_is_visible(ddat, attr);
+	case hwmon_curr:
+		return hwm_curr_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -328,6 +417,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_power_read(ddat, attr, channel, val);
 	case hwmon_energy:
 		return hwm_energy_read(ddat, attr, val);
+	case hwmon_curr:
+		return hwm_curr_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -342,6 +433,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_power:
 		return hwm_power_write(ddat, attr, channel, val);
+	case hwmon_curr:
+		return hwm_curr_write(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 78c7ce781c22..3d50b4cda382 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6676,6 +6676,12 @@
 #define   DG1_PCODE_STATUS			0x7E
 #define     DG1_UNCORE_GET_INIT_STATUS		0x0
 #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
+#define   PCODE_POWER_SETUP			0x7C
+#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
+#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
+#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
+#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
+#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
 /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* Re: [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-08-12 17:37 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Badal Nilawar
@ 2022-08-12 18:09   ` Guenter Roeck
  0 siblings, 0 replies; 19+ messages in thread
From: Guenter Roeck @ 2022-08-12 18:09 UTC (permalink / raw)
  To: Badal Nilawar, intel-gfx
  Cc: linux-hwmon, ashutosh.dixit, riana.tauro, anshuman.gupta, jon.ewins

On 8/12/22 10:37, Badal Nilawar wrote:
> From: Ashutosh Dixit <ashutosh.dixit@intel.com>
> 
> Expose the card reactive critical (I1) power. I1 is exposed as
> power1_crit in microwatts (typically for client products) or as
> curr1_crit in milliamperes (typically for server).
> 
> v2: Add curr1_crit functionality (Ashutosh)
> v3:
>    - Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
>    - Update date and kernel version in Documentation.
> v4: Use hwm_ prefix for static functions (Ashutosh)
> 
> Acked-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
>   drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
>   drivers/gpu/drm/i915/i915_reg.h               |  6 ++
>   3 files changed, 126 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> index 03d71c6869d3..bb1101757154 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> @@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
>   
>   		Only supported for particular Intel i915 graphics platforms.
>   
> +What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
> +Date:		June 2022
> +KernelVersion:	5.19
> +Contact:	dri-devel@lists.freedesktop.org
> +Description:	RW. Card reactive critical (I1) power limit in microwatts.
> +
> +		Card reactive critical (I1) power limit in microwatts is exposed
> +		for client products. The power controller will throttle the
> +		operating frequency if the power averaged over a window exceeds
> +		this limit.
> +
> +		Only supported for particular Intel i915 graphics platforms.
> +
> +What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
> +Date:		June 2022
> +KernelVersion:	5.19
> +Contact:	dri-devel@lists.freedesktop.org
> +Description:	RW. Card reactive critical (I1) power limit in milliamperes.
> +
> +		Card reactive critical (I1) power limit in milliamperes is
> +		exposed for server products. The power controller will throttle
> +		the operating frequency if the power averaged over a window
> +		exceeds this limit.
> +
> +		Only supported for particular Intel i915 graphics platforms.
> +
>   What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
>   Date:		June 2022
>   KernelVersion:	5.19
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index 416c77c89609..b1a89a6aa220 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -10,14 +10,17 @@
>   #include "i915_drv.h"
>   #include "i915_hwmon.h"
>   #include "intel_mchbar_regs.h"
> +#include "intel_pcode.h"
>   #include "gt/intel_gt_regs.h"
>   
>   /*
>    * SF_* - scale factors for particular quantities according to hwmon spec.
>    * - power  - microwatts
> + * - curr   - milliamperes
>    * - energy - microjoules
>    */
>   #define SF_POWER	1000000
> +#define SF_CURR		1000
>   #define SF_ENERGY	1000000
>   
>   #define FIELD_SHIFT(__mask)				    \
> @@ -176,11 +179,25 @@ i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
>   
>   static const struct hwmon_channel_info *hwm_info[] = {
>   	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
> -	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
> +	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
>   	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
> +	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
>   	NULL
>   };
>   
> +/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
> +static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
> +{
> +	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
> +				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
> +}
> +
> +static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
> +{
> +	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
> +				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
> +}
> +
>   static umode_t
>   hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
>   {
> @@ -214,13 +231,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
>   static umode_t
>   hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
>   {
> +	struct drm_i915_private *i915 = ddat->uncore->i915;
>   	struct i915_hwmon *hwmon = ddat->hwmon;
> +	u32 uval;
>   
>   	switch (attr) {
>   	case hwmon_power_max:
>   		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
>   	case hwmon_power_rated_max:
>   		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
> +	case hwmon_power_crit:
> +		return (hwm_pcode_read_i1(i915, &uval) ||
> +			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
>   	default:
>   		return 0;
>   	}
> @@ -230,6 +252,8 @@ static int
>   hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
>   {
>   	struct i915_hwmon *hwmon = ddat->hwmon;
> +	int ret;
> +	u32 uval;
>   
>   	switch (attr) {
>   	case hwmon_power_max:
> @@ -248,6 +272,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
>   						hwmon->scl_shift_power,
>   						SF_POWER);
>   		return 0;
> +	case hwmon_power_crit:
> +		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
> +		if (ret)
> +			return ret;
> +		if (!(uval & POWER_SETUP_I1_WATTS))
> +			return -ENODEV;
> +		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
> +				       SF_POWER, POWER_SETUP_I1_SHIFT);
> +		return 0;
>   	default:
>   		return -EOPNOTSUPP;
>   	}
> @@ -257,6 +290,7 @@ static int
>   hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
>   {
>   	struct i915_hwmon *hwmon = ddat->hwmon;
> +	u32 uval;
>   
>   	switch (attr) {
>   	case hwmon_power_max:
> @@ -267,6 +301,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
>   					  hwmon->scl_shift_power,
>   					  SF_POWER, val);
>   		return 0;
> +	case hwmon_power_crit:
> +		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
> +		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
>   	default:
>   		return -EOPNOTSUPP;
>   	}
> @@ -298,6 +335,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
>   	}
>   }
>   
> +static umode_t
> +hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
> +{
> +	struct drm_i915_private *i915 = ddat->uncore->i915;
> +	u32 uval;
> +
> +	switch (attr) {
> +	case hwmon_curr_crit:
> +		return (hwm_pcode_read_i1(i915, &uval) ||
> +			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static int
> +hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
> +{
> +	int ret;
> +	u32 uval;
> +
> +	switch (attr) {
> +	case hwmon_curr_crit:
> +		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
> +		if (ret)
> +			return ret;
> +		if (uval & POWER_SETUP_I1_WATTS)
> +			return -ENODEV;
> +		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
> +				       SF_CURR, POWER_SETUP_I1_SHIFT);
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int
> +hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
> +{
> +	u32 uval;
> +
> +	switch (attr) {
> +	case hwmon_curr_crit:
> +		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
> +		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
>   static umode_t
>   hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
>   	       u32 attr, int channel)
> @@ -311,6 +398,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
>   		return hwm_power_is_visible(ddat, attr, channel);
>   	case hwmon_energy:
>   		return hwm_energy_is_visible(ddat, attr);
> +	case hwmon_curr:
> +		return hwm_curr_is_visible(ddat, attr);
>   	default:
>   		return 0;
>   	}
> @@ -329,6 +418,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>   		return hwm_power_read(ddat, attr, channel, val);
>   	case hwmon_energy:
>   		return hwm_energy_read(ddat, attr, val);
> +	case hwmon_curr:
> +		return hwm_curr_read(ddat, attr, val);
>   	default:
>   		return -EOPNOTSUPP;
>   	}
> @@ -343,6 +434,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>   	switch (type) {
>   	case hwmon_power:
>   		return hwm_power_write(ddat, attr, channel, val);
> +	case hwmon_curr:
> +		return hwm_curr_write(ddat, attr, val);
>   	default:
>   		return -EOPNOTSUPP;
>   	}
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 0bc6ae0c8bd7..041b858b95f4 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6788,6 +6788,12 @@
>   #define   DG1_PCODE_STATUS			0x7E
>   #define     DG1_UNCORE_GET_INIT_STATUS		0x0
>   #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
> +#define   PCODE_POWER_SETUP			0x7C
> +#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
> +#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
> +#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
> +#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
> +#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
>   #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
>   #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
>   /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */


^ permalink raw reply	[flat|nested] 19+ messages in thread

* [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power
  2022-08-12 17:37 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
@ 2022-08-12 17:37 ` Badal Nilawar
  2022-08-12 18:09   ` Guenter Roeck
  0 siblings, 1 reply; 19+ messages in thread
From: Badal Nilawar @ 2022-08-12 17:37 UTC (permalink / raw)
  To: intel-gfx
  Cc: linux-hwmon, ashutosh.dixit, riana.tauro, anshuman.gupta,
	jon.ewins, linux

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3:
  - Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
  - Update date and kernel version in Documentation.
v4: Use hwm_ prefix for static functions (Ashutosh)

Acked-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
 drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  6 ++
 3 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 03d71c6869d3..bb1101757154 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		June 2022
 KernelVersion:	5.19
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 416c77c89609..b1a89a6aa220 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -10,14 +10,17 @@
 #include "i915_drv.h"
 #include "i915_hwmon.h"
 #include "intel_mchbar_regs.h"
+#include "intel_pcode.h"
 #include "gt/intel_gt_regs.h"
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - power  - microwatts
+ * - curr   - milliamperes
  * - energy - microjoules
  */
 #define SF_POWER	1000000
+#define SF_CURR		1000
 #define SF_ENERGY	1000000
 
 #define FIELD_SHIFT(__mask)				    \
@@ -176,11 +179,25 @@ i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
 
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
-	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
 	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
 	NULL
 };
 
+/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
+static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
+{
+	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
+				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
+}
+
+static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
+{
+	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
+				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
+}
+
 static umode_t
 hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 {
@@ -214,13 +231,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 static umode_t
 hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 {
+	struct drm_i915_private *i915 = ddat->uncore->i915;
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
 	case hwmon_power_rated_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	case hwmon_power_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
 	default:
 		return 0;
 	}
@@ -230,6 +252,8 @@ static int
 hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	int ret;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -248,6 +272,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 						hwmon->scl_shift_power,
 						SF_POWER);
 		return 0;
+	case hwmon_power_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (!(uval & POWER_SETUP_I1_WATTS))
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_POWER, POWER_SETUP_I1_SHIFT);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -257,6 +290,7 @@ static int
 hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -267,6 +301,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 					  hwmon->scl_shift_power,
 					  SF_POWER, val);
 		return 0;
+	case hwmon_power_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -298,6 +335,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	int ret;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (uval & POWER_SETUP_I1_WATTS)
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_CURR, POWER_SETUP_I1_SHIFT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
+{
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -311,6 +398,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_power_is_visible(ddat, attr, channel);
 	case hwmon_energy:
 		return hwm_energy_is_visible(ddat, attr);
+	case hwmon_curr:
+		return hwm_curr_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -329,6 +418,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_power_read(ddat, attr, channel, val);
 	case hwmon_energy:
 		return hwm_energy_read(ddat, attr, val);
+	case hwmon_curr:
+		return hwm_curr_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -343,6 +434,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_power:
 		return hwm_power_write(ddat, attr, channel, val);
+	case hwmon_curr:
+		return hwm_curr_write(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0bc6ae0c8bd7..041b858b95f4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6788,6 +6788,12 @@
 #define   DG1_PCODE_STATUS			0x7E
 #define     DG1_UNCORE_GET_INIT_STATUS		0x0
 #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
+#define   PCODE_POWER_SETUP			0x7C
+#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
+#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
+#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
+#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
+#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
 /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

end of thread, other threads:[~2022-10-13 15:46 UTC | newest]

Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-13 15:45 [PATCH 0/7] drm/i915: Add HWMON support Ashutosh Dixit
2022-10-13 15:45 ` [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure Ashutosh Dixit
2022-10-13 15:45 ` [PATCH 2/7] drm/i915/hwmon: Add HWMON current voltage support Ashutosh Dixit
2022-10-13 15:45 ` [PATCH 3/7] drm/i915/hwmon: Power PL1 limit and TDP setting Ashutosh Dixit
2022-10-13 15:45 ` [PATCH 4/7] drm/i915/hwmon: Show device level energy usage Ashutosh Dixit
2022-10-13 15:45 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Ashutosh Dixit
2022-10-13 15:45 ` [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval Ashutosh Dixit
2022-10-13 15:45 ` [PATCH 7/7] drm/i915/hwmon: Extend power/energy for XEHPSDV Ashutosh Dixit
  -- strict thread matches above, loose matches on Subject: below --
2022-09-27  5:50 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
2022-09-27  5:50 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Badal Nilawar
2022-09-26 17:52 [PATCH 0/7] Add HWMON support Badal Nilawar
2022-09-26 17:52 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Badal Nilawar
2022-09-23 19:56 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
2022-09-23 19:56 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Badal Nilawar
2022-09-16 15:00 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
2022-09-16 15:00 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Badal Nilawar
2022-09-21 15:07   ` Gupta, Anshuman
2022-09-22  3:17     ` Dixit, Ashutosh
2022-09-22  5:24       ` Gupta, Anshuman
2022-08-25 13:21 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
2022-08-25 13:21 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Badal Nilawar
2022-08-18 19:38 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
2022-08-18 19:38 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Badal Nilawar
2022-08-12 17:37 [PATCH 0/7] drm/i915: Add HWMON support Badal Nilawar
2022-08-12 17:37 ` [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power Badal Nilawar
2022-08-12 18:09   ` Guenter Roeck

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).