From: Guenter Roeck <linux@roeck-us.net>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: "Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jean Delvare" <jdelvare@suse.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Nuno Sá" <nuno.sa@analog.com>,
"Robert Marko" <robert.marko@sartura.hr>,
"Luka Perkov" <luka.perkov@sartura.hr>,
"Alexandru Tachici" <alexandru.tachici@analog.com>,
"Akshay Gupta" <Akshay.Gupta@amd.com>,
"Kun Yi" <kunyi@google.com>,
"Supreeth Venkatesh" <supreeth.venkatesh@amd.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Eric Tremblay" <etremblay@distech-controls.com>,
linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, "Rob Herring" <robh@kernel.org>
Subject: Re: [PATCH v2 2/2] dt-bindings: hwmon: correct indentation and style in examples
Date: Wed, 18 Jan 2023 10:57:58 -0800 [thread overview]
Message-ID: <20230118185758.GA965196@roeck-us.net> (raw)
In-Reply-To: <20230118172237.349111-2-krzysztof.kozlowski@linaro.org>
On Wed, Jan 18, 2023 at 06:22:37PM +0100, Krzysztof Kozlowski wrote:
> Fix mixed indentation to 4-spaces, remove unnecessary suffix from
> i2c node name and use lower-case hex. No functional impact.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to hwmon-next.
Thanks,
Guenter
> ---
>
> Changes since v1:
> 1. Add Rb tag
> 2. Reorder patches to silence warnings.
> ---
> .../bindings/hwmon/adi,adm1177.yaml | 12 ++---
> .../bindings/hwmon/adi,adm1266.yaml | 6 +--
> .../bindings/hwmon/adi,axi-fan-control.yaml | 20 ++++-----
> .../bindings/hwmon/adi,ltc2947.yaml | 20 ++++-----
> .../bindings/hwmon/adi,ltc2992.yaml | 26 +++++------
> .../devicetree/bindings/hwmon/amd,sbrmi.yaml | 6 +--
> .../devicetree/bindings/hwmon/amd,sbtsi.yaml | 6 +--
> .../devicetree/bindings/hwmon/iio-hwmon.yaml | 8 ++--
> .../bindings/hwmon/national,lm90.yaml | 44 +++++++++----------
> .../bindings/hwmon/ntc-thermistor.yaml | 2 +-
> .../bindings/hwmon/nuvoton,nct7802.yaml | 16 +++----
> .../devicetree/bindings/hwmon/ti,tmp513.yaml | 22 +++++-----
> .../bindings/hwmon/ti,tps23861.yaml | 16 +++----
> 13 files changed, 102 insertions(+), 102 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> index d794deb08bb7..ca2b47320689 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> @@ -52,16 +52,16 @@ examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> pwmon@5a {
> - compatible = "adi,adm1177";
> - reg = <0x5a>;
> - shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
> - adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
> - adi,vrange-high-enable;
> + compatible = "adi,adm1177";
> + reg = <0x5a>;
> + shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
> + adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
> + adi,vrange-high-enable;
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> index 43b4f4f57b49..4f8e11bd5142 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> @@ -39,13 +39,13 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> adm1266@40 {
> - compatible = "adi,adm1266";
> - reg = <0x40>;
> + compatible = "adi,adm1266";
> + reg = <0x40>;
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> index f2f99afb3a3b..0cf3ed6212a6 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> @@ -49,15 +49,15 @@ additionalProperties: false
> examples:
> - |
> fpga_axi: fpga-axi {
> - #address-cells = <0x2>;
> - #size-cells = <0x1>;
> -
> - axi_fan_control: axi-fan-control@80000000 {
> - compatible = "adi,axi-fan-control-1.00.a";
> - reg = <0x0 0x80000000 0x10000>;
> - clocks = <&clk 71>;
> - interrupts = <0 110 0>;
> - pulses-per-revolution = <2>;
> - };
> + #address-cells = <0x2>;
> + #size-cells = <0x1>;
> +
> + axi_fan_control: axi-fan-control@80000000 {
> + compatible = "adi,axi-fan-control-1.00.a";
> + reg = <0x0 0x80000000 0x10000>;
> + clocks = <&clk 71>;
> + interrupts = <0 110 0>;
> + pulses-per-revolution = <2>;
> + };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> index bf04151b63d2..152935334c76 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> @@ -87,15 +87,15 @@ additionalProperties: false
> examples:
> - |
> spi {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ltc2947_spi: ltc2947@0 {
> - compatible = "adi,ltc2947";
> - reg = <0>;
> - /* accumulation takes place always for energ1/charge1. */
> - /* accumulation only on positive current for energy2/charge2. */
> - adi,accumulator-ctl-pol = <0 1>;
> - };
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ltc2947_spi: ltc2947@0 {
> + compatible = "adi,ltc2947";
> + reg = <0>;
> + /* accumulation takes place always for energ1/charge1. */
> + /* accumulation only on positive current for energy2/charge2. */
> + adi,accumulator-ctl-pol = <0 1>;
> + };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
> index ec984248219e..dba74f400bc2 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
> @@ -55,26 +55,26 @@ additionalProperties: false
>
> examples:
> - |
> - i2c1 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> ltc2992@6f {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - compatible = "adi,ltc2992";
> - reg = <0x6f>;
> + compatible = "adi,ltc2992";
> + reg = <0x6f>;
>
> - channel@0 {
> - reg = <0x0>;
> - shunt-resistor-micro-ohms = <10000>;
> - };
> + channel@0 {
> + reg = <0x0>;
> + shunt-resistor-micro-ohms = <10000>;
> + };
>
> - channel@1 {
> - reg = <0x1>;
> - shunt-resistor-micro-ohms = <10000>;
> - };
> + channel@1 {
> + reg = <0x1>;
> + shunt-resistor-micro-ohms = <10000>;
> + };
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
> index 7598b083979c..353d81d89bf5 100644
> --- a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
> @@ -41,13 +41,13 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> sbrmi@3c {
> - compatible = "amd,sbrmi";
> - reg = <0x3c>;
> + compatible = "amd,sbrmi";
> + reg = <0x3c>;
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
> index 446b09f1ce94..75088244a274 100644
> --- a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
> @@ -42,13 +42,13 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> sbtsi@4c {
> - compatible = "amd,sbtsi";
> - reg = <0x4c>;
> + compatible = "amd,sbtsi";
> + reg = <0x4c>;
> };
> };
> ...
> diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
> index e1ccbd30e0eb..c54b5986b365 100644
> --- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
> @@ -31,7 +31,7 @@ additionalProperties: false
>
> examples:
> - |
> - iio-hwmon {
> - compatible = "iio-hwmon";
> - io-channels = <&adc 1>, <&adc 2>;
> - };
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 1>, <&adc 2>;
> + };
> diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> index e1719839faf0..7b9d48d6d6da 100644
> --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> @@ -198,30 +198,30 @@ examples:
> };
> - |
> i2c {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - sensor@4c {
> - compatible = "adi,adt7481";
> - reg = <0x4c>;
> #address-cells = <1>;
> #size-cells = <0>;
>
> - channel@0 {
> - reg = <0x0>;
> - label = "local";
> - };
> -
> - channel@1 {
> - reg = <0x1>;
> - label = "front";
> - temperature-offset-millicelsius = <4000>;
> - };
> -
> - channel@2 {
> - reg = <0x2>;
> - label = "back";
> - temperature-offset-millicelsius = <750>;
> + sensor@4c {
> + compatible = "adi,adt7481";
> + reg = <0x4c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + reg = <0x0>;
> + label = "local";
> + };
> +
> + channel@1 {
> + reg = <0x1>;
> + label = "front";
> + temperature-offset-millicelsius = <4000>;
> + };
> +
> + channel@2 {
> + reg = <0x2>;
> + label = "back";
> + temperature-offset-millicelsius = <750>;
> + };
> };
> - };
> };
> diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
> index 6a1920712fb9..3d0146e20d3e 100644
> --- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
> @@ -131,7 +131,7 @@ additionalProperties: false
>
> examples:
> - |
> - thermistor0 {
> + thermistor {
> compatible = "murata,ncp18wb473";
> io-channels = <&gpadc 0x06>;
> pullup-uv = <1800000>;
> diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
> index 2f0620ecccc9..cd8dcd797031 100644
> --- a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
> @@ -123,23 +123,23 @@ examples:
> #size-cells = <0>;
>
> channel@0 { /* LTD */
> - reg = <0>;
> + reg = <0>;
> };
>
> channel@1 { /* RTD1 */
> - reg = <1>;
> - sensor-type = "voltage";
> + reg = <1>;
> + sensor-type = "voltage";
> };
>
> channel@2 { /* RTD2 */
> - reg = <2>;
> - sensor-type = "temperature";
> - temperature-mode = "thermal-diode";
> + reg = <2>;
> + sensor-type = "temperature";
> + temperature-mode = "thermal-diode";
> };
>
> channel@3 { /* RTD3 */
> - reg = <3>;
> - sensor-type = "temperature";
> + reg = <3>;
> + sensor-type = "temperature";
> };
> };
> };
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> index 1502b22c77cc..fde5225ce012 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> @@ -77,15 +77,15 @@ additionalProperties: false
> examples:
> - |
> i2c {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - tmp513@5c {
> - compatible = "ti,tmp513";
> - reg = <0x5C>;
> - shunt-resistor-micro-ohms = <330000>;
> - ti,bus-range-microvolt = <32000000>;
> - ti,pga-gain = <8>;
> - ti,nfactor = <0x1 0xF3 0x00>;
> - };
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tmp513@5c {
> + compatible = "ti,tmp513";
> + reg = <0x5c>;
> + shunt-resistor-micro-ohms = <330000>;
> + ti,bus-range-microvolt = <32000000>;
> + ti,pga-gain = <8>;
> + ti,nfactor = <0x1 0xf3 0x00>;
> + };
> };
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
> index 3bc8e73dfbf0..bce68a326919 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
> @@ -40,12 +40,12 @@ additionalProperties: false
> examples:
> - |
> i2c {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - tps23861@30 {
> - compatible = "ti,tps23861";
> - reg = <0x30>;
> - shunt-resistor-micro-ohms = <255000>;
> - };
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tps23861@30 {
> + compatible = "ti,tps23861";
> + reg = <0x30>;
> + shunt-resistor-micro-ohms = <255000>;
> + };
> };
next prev parent reply other threads:[~2023-01-18 18:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-18 17:22 [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example Krzysztof Kozlowski
2023-01-18 17:22 ` [PATCH v2 2/2] dt-bindings: hwmon: correct indentation and style in examples Krzysztof Kozlowski
2023-01-18 18:57 ` Guenter Roeck [this message]
2023-01-18 18:57 ` [PATCH v2 1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230118185758.GA965196@roeck-us.net \
--to=linux@roeck-us.net \
--cc=Akshay.Gupta@amd.com \
--cc=Michael.Hennerich@analog.com \
--cc=alexandru.tachici@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=etremblay@distech-controls.com \
--cc=jdelvare@suse.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kunyi@google.com \
--cc=linus.walleij@linaro.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luka.perkov@sartura.hr \
--cc=nuno.sa@analog.com \
--cc=robert.marko@sartura.hr \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=supreeth.venkatesh@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).