[PATCH v3 0/3] Add support for ESM

[PATCH v3 0/3] Add support for ESM

[Neha Malcom Francis]

ESM (Error Signaling Module) is a fundamental IP responsible for
handling safety events. The driver currently present in U-Boot is
responsible for configuring ESM. This patch series adds dt-binding and
nodes for J721E and J7200. This goes towards end goal of having DTB sync
with that of U-Boot as well as ensuring completeness of hardware
description in devicetree.

Changes in v3:
	- formatting changes in dt-binding
	- modified example in dt-binding cbass_main -> bus

Changes in v2:
	- misc/esm-k3.yaml -> hwmon/ti,j721e-esm.yaml
	- formatting changes in dt-binding
	- modified example in dt-binding

Neha Malcom Francis (3):
  dt-bindings: misc: esm: Add ESM support for TI K3 devices
  arm64: dts: ti: k3-j721e: Add ESM support
  arm64: dts: ti: k3-j7200: Add ESM support

 .../bindings/hwmon/ti,j721e-esm.yaml          | 53 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  6 +++
 arch/arm64/boot/dts/ti/k3-j7200.dtsi          |  1 +
 arch/arm64/boot/dts/ti/k3-j721e.dtsi          |  1 +
 4 files changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml

-- 
2.34.1

[PATCH v3 1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices

[Neha Malcom Francis]

Document the binding for TI K3 ESM (Error Signaling Module) block.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
---
 .../bindings/hwmon/ti,j721e-esm.yaml          | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml
new file mode 100644
index 000000000000..c5eb7f46cc46
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,j721e-esm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 ESM
+
+maintainers:
+  - Neha Malcom Francis <n-francis@ti.com>
+
+description:
+  The ESM (Error Signaling Module) is an IP block on TI K3 devices
+  that allows handling of safety events somewhat similar to what interrupt
+  controller would do. The safety signals have their separate paths within
+  the SoC, and they are handled by the ESM, which routes them to the proper
+  destination, which can be system reset, interrupt controller, etc. In the
+  simplest configuration the signals are just routed to reset the SoC.
+
+properties:
+  compatible:
+    const: ti,j721e-esm
+
+  reg:
+    maxItems: 1
+
+  ti,esm-pins:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      integer array of ESM interrupt pins to route to external event pin
+      which can be used to reset the SoC.
+    minItems: 1
+    maxItems: 255
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ti,esm-pins
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        esm@700000 {
+            compatible = "ti,j721e-esm";
+            reg = <0x0 0x700000 0x0 0x1000>;
+            ti,esm-pins = <344>, <345>;
+        };
+    };
-- 
2.34.1

[PATCH v3 2/3] arm64: dts: ti: k3-j721e: Add ESM support

[Neha Malcom Francis]

Add address entry mapping ESM on J721E.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index b912143b6a11..52bcde601eb8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -131,6 +131,7 @@ cbass_main: bus@100000 {
 		#size-cells = <2>;
 		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
 			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
 			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
 			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
 			 <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
-- 
2.34.1

[PATCH v3 3/3] arm64: dts: ti: k3-j7200: Add ESM support

[Neha Malcom Francis]

Add address entry mapping ESM on J7200.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 6 ++++++
 arch/arm64/boot/dts/ti/k3-j7200.dtsi      | 1 +
 2 files changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index ef352e32f19d..89f816f5e53d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -1010,4 +1010,10 @@ main_r5fss0_core1: r5f@5d00000 {
 			ti,loczrama = <1>;
 		};
 	};
+
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x0 0x700000 0x0 0x1000>;
+		ti,esm-pins = <656>, <657>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index bbe380c72a7e..4998eb4fbe75 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -128,6 +128,7 @@ cbass_main: bus@100000 {
 		#size-cells = <2>;
 		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
 			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
 			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
-- 
2.34.1

Re: [PATCH v3 1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices

[Krzysztof Kozlowski]

On 24/04/2023 11:53, Neha Malcom Francis wrote:
> Document the binding for TI K3 ESM (Error Signaling Module) block.
> 
> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
> ---
>  .../bindings/hwmon/ti,j721e-esm.yaml          | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml
> 

Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching). misc->hwmon

> diff --git a/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml
> new file mode 100644
> index 000000000000..c5eb7f46cc46
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ti,j721e-esm.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 Texas Instruments Incorporated
> +%YAML 1.2



Best regards,
Krzysztof