* [PATCH 05/14] hwmon: (via686a) Do PCI error checks on own line
[not found] <20230824132832.78705-1-ilpo.jarvinen@linux.intel.com>
@ 2023-08-24 13:28 ` Ilpo Järvinen
2023-08-25 13:18 ` Guenter Roeck
2023-08-24 13:28 ` [PATCH 06/14] hwmon: (vt8231) " Ilpo Järvinen
2023-08-24 13:28 ` [PATCH 13/14] hwmon: (sis5595) " Ilpo Järvinen
2 siblings, 1 reply; 6+ messages in thread
From: Ilpo Järvinen @ 2023-08-24 13:28 UTC (permalink / raw)
To: linux-pci, Bjorn Helgaas, Jean Delvare, Guenter Roeck,
linux-hwmon, linux-kernel
Cc: Ilpo Järvinen
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/hwmon/via686a.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 37d7374896f6..407933d6e425 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -855,16 +855,17 @@ static int via686a_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
u16 address, val;
+ int ret;
if (force_addr) {
address = force_addr & ~(VIA686A_EXTENT - 1);
dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", address);
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(dev, VIA686A_BASE_REG, address | 1))
+ ret = pci_write_config_word(dev, VIA686A_BASE_REG, address | 1);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
}
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(dev, VIA686A_BASE_REG, &val))
+ ret = pci_read_config_word(dev, VIA686A_BASE_REG, &val);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
address = val & ~(VIA686A_EXTENT - 1);
@@ -874,8 +875,8 @@ static int via686a_pci_probe(struct pci_dev *dev,
return -ENODEV;
}
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(dev, VIA686A_ENABLE_REG, &val))
+ ret = pci_read_config_word(dev, VIA686A_ENABLE_REG, &val);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
if (!(val & 0x0001)) {
if (!force_addr) {
@@ -886,9 +887,8 @@ static int via686a_pci_probe(struct pci_dev *dev,
}
dev_warn(&dev->dev, "Enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(dev, VIA686A_ENABLE_REG,
- val | 0x0001))
+ ret = pci_write_config_word(dev, VIA686A_ENABLE_REG, val | 0x1);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 06/14] hwmon: (vt8231) Do PCI error checks on own line
[not found] <20230824132832.78705-1-ilpo.jarvinen@linux.intel.com>
2023-08-24 13:28 ` [PATCH 05/14] hwmon: (via686a) Do PCI error checks on own line Ilpo Järvinen
@ 2023-08-24 13:28 ` Ilpo Järvinen
2023-08-25 13:19 ` Guenter Roeck
2023-08-24 13:28 ` [PATCH 13/14] hwmon: (sis5595) " Ilpo Järvinen
2 siblings, 1 reply; 6+ messages in thread
From: Ilpo Järvinen @ 2023-08-24 13:28 UTC (permalink / raw)
To: linux-pci, Bjorn Helgaas, Roger Lucas, Jean Delvare,
Guenter Roeck, linux-hwmon, linux-kernel
Cc: Ilpo Järvinen
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/hwmon/vt8231.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index b7c6392ba673..16bc16d33cd1 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -971,13 +971,15 @@ static int vt8231_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
u16 address, val;
+ int ret;
+
if (force_addr) {
address = force_addr & 0xff00;
dev_warn(&dev->dev, "Forcing ISA address 0x%x\n",
address);
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(dev, VT8231_BASE_REG, address | 1))
+ ret = pci_write_config_word(dev, VT8231_BASE_REG, address | 1);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
}
@@ -997,9 +999,8 @@ static int vt8231_pci_probe(struct pci_dev *dev,
if (!(val & 0x0001)) {
dev_warn(&dev->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(dev, VT8231_ENABLE_REG,
- val | 0x0001))
+ ret = pci_write_config_word(dev, VT8231_ENABLE_REG, val | 0x1);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 13/14] hwmon: (sis5595) Do PCI error checks on own line
[not found] <20230824132832.78705-1-ilpo.jarvinen@linux.intel.com>
2023-08-24 13:28 ` [PATCH 05/14] hwmon: (via686a) Do PCI error checks on own line Ilpo Järvinen
2023-08-24 13:28 ` [PATCH 06/14] hwmon: (vt8231) " Ilpo Järvinen
@ 2023-08-24 13:28 ` Ilpo Järvinen
2023-08-25 13:21 ` Guenter Roeck
2 siblings, 1 reply; 6+ messages in thread
From: Ilpo Järvinen @ 2023-08-24 13:28 UTC (permalink / raw)
To: linux-pci, Bjorn Helgaas, Jean Delvare, Guenter Roeck,
linux-hwmon, linux-kernel
Cc: Ilpo Järvinen
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability. Handle error
print with a label instead of trying to chain everything into a single
if condtion.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/hwmon/sis5595.c | 35 ++++++++++++++++++++---------------
1 file changed, 20 insertions(+), 15 deletions(-)
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index b0b05fd12221..0a0479501e11 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -798,7 +798,7 @@ static int sis5595_pci_probe(struct pci_dev *dev,
{
u16 address;
u8 enable;
- int *i;
+ int *i, err;
for (i = blacklist; *i != 0; i++) {
struct pci_dev *d;
@@ -818,8 +818,8 @@ static int sis5595_pci_probe(struct pci_dev *dev,
pci_write_config_word(dev, SIS5595_BASE_REG, force_addr);
}
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(dev, SIS5595_BASE_REG, &address)) {
+ err = pci_read_config_word(dev, SIS5595_BASE_REG, &address);
+ if (err != PCIBIOS_SUCCESSFUL) {
dev_err(&dev->dev, "Failed to read ISA address\n");
return -ENODEV;
}
@@ -836,22 +836,23 @@ static int sis5595_pci_probe(struct pci_dev *dev,
return -ENODEV;
}
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) {
+ err = pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable);
+ if (err != PCIBIOS_SUCCESSFUL) {
dev_err(&dev->dev, "Failed to read enable register\n");
return -ENODEV;
}
if (!(enable & 0x80)) {
- if ((PCIBIOS_SUCCESSFUL !=
- pci_write_config_byte(dev, SIS5595_ENABLE_REG,
- enable | 0x80))
- || (PCIBIOS_SUCCESSFUL !=
- pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable))
- || (!(enable & 0x80))) {
- /* doesn't work for some chips! */
- dev_err(&dev->dev, "Failed to enable HWM device\n");
- return -ENODEV;
- }
+ err = pci_write_config_byte(dev, SIS5595_ENABLE_REG, enable | 0x80);
+ if (err != PCIBIOS_SUCCESSFUL)
+ goto enable_fail;
+
+ err = pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable);
+ if (err != PCIBIOS_SUCCESSFUL)
+ goto enable_fail;
+
+ /* doesn't work for some chips! */
+ if (!(enable & 0x80))
+ goto enable_fail;
}
if (platform_driver_register(&sis5595_driver)) {
@@ -871,6 +872,10 @@ static int sis5595_pci_probe(struct pci_dev *dev,
*/
return -ENODEV;
+enable_fail:
+ dev_err(&dev->dev, "Failed to enable HWM device\n");
+ goto exit;
+
exit_unregister:
pci_dev_put(dev);
platform_driver_unregister(&sis5595_driver);
--
2.30.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 05/14] hwmon: (via686a) Do PCI error checks on own line
2023-08-24 13:28 ` [PATCH 05/14] hwmon: (via686a) Do PCI error checks on own line Ilpo Järvinen
@ 2023-08-25 13:18 ` Guenter Roeck
0 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2023-08-25 13:18 UTC (permalink / raw)
To: Ilpo Järvinen
Cc: linux-pci, Bjorn Helgaas, Jean Delvare, linux-hwmon, linux-kernel
On Thu, Aug 24, 2023 at 04:28:23PM +0300, Ilpo Järvinen wrote:
> Instead of if conditions with line splits, use the usual error handling
> pattern with a separate variable to improve readability.
>
> No functional changes intended.
>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Applied.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 06/14] hwmon: (vt8231) Do PCI error checks on own line
2023-08-24 13:28 ` [PATCH 06/14] hwmon: (vt8231) " Ilpo Järvinen
@ 2023-08-25 13:19 ` Guenter Roeck
0 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2023-08-25 13:19 UTC (permalink / raw)
To: Ilpo Järvinen
Cc: linux-pci, Bjorn Helgaas, Roger Lucas, Jean Delvare, linux-hwmon,
linux-kernel
On Thu, Aug 24, 2023 at 04:28:24PM +0300, Ilpo Järvinen wrote:
> Instead of if conditions with line splits, use the usual error handling
> pattern with a separate variable to improve readability.
>
> No functional changes intended.
>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Applied.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 13/14] hwmon: (sis5595) Do PCI error checks on own line
2023-08-24 13:28 ` [PATCH 13/14] hwmon: (sis5595) " Ilpo Järvinen
@ 2023-08-25 13:21 ` Guenter Roeck
0 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2023-08-25 13:21 UTC (permalink / raw)
To: Ilpo Järvinen
Cc: linux-pci, Bjorn Helgaas, Jean Delvare, linux-hwmon, linux-kernel
On Thu, Aug 24, 2023 at 04:28:31PM +0300, Ilpo Järvinen wrote:
> Instead of if conditions with line splits, use the usual error handling
> pattern with a separate variable to improve readability. Handle error
> print with a label instead of trying to chain everything into a single
> if condtion.
s/condtion/condition/
Applied, after fixing that up.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-08-25 13:22 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20230824132832.78705-1-ilpo.jarvinen@linux.intel.com>
2023-08-24 13:28 ` [PATCH 05/14] hwmon: (via686a) Do PCI error checks on own line Ilpo Järvinen
2023-08-25 13:18 ` Guenter Roeck
2023-08-24 13:28 ` [PATCH 06/14] hwmon: (vt8231) " Ilpo Järvinen
2023-08-25 13:19 ` Guenter Roeck
2023-08-24 13:28 ` [PATCH 13/14] hwmon: (sis5595) " Ilpo Järvinen
2023-08-25 13:21 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).