From: Ken Moffat <zarniwhoop73@googlemail.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
"Clemens Ladisch" <clemens@ladisch.de>,
"Jean Delvare" <jdelvare@suse.com>,
"Brad Campbell" <lists2009@fnarfbargle.com>,
"Ondrej Čerman" <ocerman@sda1.eu>,
"Bernhard Gebetsberger" <bernhard.gebetsberger@gmx.at>,
"Holger Kiehl" <Holger.Kiehl@dwd.de>,
"Michael Larabel" <michael@phoronix.com>,
"Jonathan McDowell" <noodles@earth.li>,
"Sebastian Reichel" <sebastian.reichel@collabora.com>,
"Darren Salt" <devspam@moreofthesa.me.uk>
Subject: Re: [PATCH v4 6/6] hwmon: (k10temp) Add debugfs support
Date: Fri, 24 Jan 2020 00:01:02 +0000 [thread overview]
Message-ID: <CANVEwpbeT_O=4TZu7RuRupwOGTNEVWSnHXvMsEqEmeKqmu92jw@mail.gmail.com> (raw)
In-Reply-To: <20200122160800.12560-7-linux@roeck-us.net>
Hi Guenter,
you asked else where for debugfs files from machines with embedded
graphics. I've pasted diffs below (idle,load) from my 3400G ('Picasso' APU).
On Wed, 22 Jan 2020 at 16:08, Guenter Roeck <linux@roeck-us.net> wrote:
>
> Show thermal and SVI registers for Family 17h CPUs.
>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/hwmon/k10temp.c | 78 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 77 insertions(+), 1 deletion(-)
>
[snipping here for brevity]
--- svi-idle 2020-01-23 23:27:36.576177896 +0000
+++ svi-load 2020-01-23 23:33:05.342392957 +0000
@@ -1,8 +1,8 @@
-0x05a000: 0000000e 0000000e 00000002 01710000
-0x05a010: 014a0010 00000000 0000000e 00000000
-0x05a020: 00000000 00000000 00000080 005f0000
+0x05a000: 0000000e 0000000e 00000002 011f002e
+0x05a010: 014a0017 00000000 0000000e 00000000
+0x05a020: 00000000 00000000 00000080 001a0000
0x05a030: 00000000 00000000 00000021 00000000
-0x05a040: 00000000 00000000 00000000 5f000000
+0x05a040: 00000000 00000000 00000000 1a000000
0x05a050: 68000000 48000000 00000000 0000030a
0x05a060: 00000007 00000000 80000002 80000002
0x05a070: 80000041 00000001 00000008 00000000
--- thm-idle 2020-01-23 23:27:51.969229368 +0000
+++ thm-load 2020-01-23 23:33:19.779445923 +0000
@@ -1,15 +1,15 @@
-0x059800: 24200fef 00ff1001 00002921 000f4240
+0x059800: 3f800fef 00ff1001 00002921 000f4240
0x059810: 800000f9 00000000 00000000 00000000
0x059820: 00000000 00000000 00000000 0fff0078
-0x059830: 00000000 0029ccdf 0029acde 002a2ce2
-0x059840: 002a4ce3 002a0ce1 002a0ce1 002a6ce4
-0x059850: 0029ece0 0029ece0 002a0ce1 002a0ce1
-0x059860: 0029acde 002a8ce5 0029ece0 0029acde
-0x059870: 00298cdd 0029ece0 002a8ce5 002a4ce3
-0x059880: 0029ccdf 002a8ce5 0029acde 00296cdc
-0x059890: 002a4ce3 00296cdc 0029ece0 0029acde
-0x0598a0: 00294cdb 0029ece0 00294cdb 00298cdd
-0x0598b0: 0029acde 00000000 00002100 ffffffff
+0x059830: 00000000 0030cd17 002e8d05 002f4d0b
+0x059840: 00338d2c 0032cd26 00314d1b 0034cd36
+0x059850: 002d8cfd 002e2d02 00300d11 002eed08
+0x059860: 002dccff 002fcd0f 002d4cfb 002e0d01
+0x059870: 002ded00 002f2d0a 00346d33 00344d32
+0x059880: 002f8d0d 00346d33 002f4d0b 0030cd17
+0x059890: 00344d32 00302d12 0031ed20 00386d53
+0x0598a0: 00392d59 0036ad45 0036ed47 0034ad35
+0x0598b0: 0034ad35 00000000 00002100 ffffffff
0x0598c0: 00000000 00000000 00000000 00000000
0x0598d0: 00000000 00000000 00000000 00000000
0x0598e0: 00000000 00000000 00000000 00000000
@@ -20,15 +20,15 @@
0x059930: 00000000 00000000 00000000 00000000
0x059940: 00000000 00000000 00000000 00000000
0x059950: 00000000 00000000 00000000 00000000
-0x059960: 00000000 08400001 00004623 00000039
+0x059960: 00000000 08400001 00008241 00000045
0x059970: c0800005 30c8680e 00024068 00000000
0x059980: 00000000 00000000 00000000 00000000
0x059990: 00000000 00000000 00000000 00000000
0x0599a0: 00000000 00000000 00000000 00000000
0x0599b0: 00000000 00000000 00000000 00000000
-0x0599c0: 00000060 000002a8 0000000c 00000294
-0x0599d0: 0000001b 00000000 00000000 000002a8
-0x0599e0: 0000000c 00000000 00000000 00000001
+0x0599c0: 00000060 00000392 0000001b 000002d4
+0x0599d0: 0000000d 00000000 00000000 00000392
+0x0599e0: 0000001b 00000000 00000000 00000001
0x0599f0: 00000000 00010003 00000000 00000000
0x059a00: 00000000 00000000 00000000 00000000
0x059a10: 0000000e 00000000 00000003 00000000
and the accompanying human-readable sensor output
(these were not all taken at hte exact same moment)
--- k10-idle 2020-01-23 23:25:32.020740997 +0000
+++ k10-load 2020-01-23 23:33:01.305378146 +0000
@@ -1,15 +1,15 @@
k10temp-pci-00c3
Adapter: PCI adapter
-Vcore: +0.96 V
-Vsoc: +1.09 V
-Tdie: +36.9°C
-Tctl: +36.9°C
-Icore: +2.00 A
-Isoc: +5.75 A
+Vcore: +1.34 V
+Vsoc: +1.08 V
+Tdie: +62.5°C
+Tctl: +62.5°C
+Icore: +56.00 A
+Isoc: +6.75 A
amdgpu-pci-0900
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
-edge: +36.0°C (crit = +80.0°C, hyst = +0.0°C)
+edge: +62.0°C (crit = +80.0°C, hyst = +0.0°C)
Hope this is not a waste of your time.
Would you like similar for the 2500u ?
ĸen
--
I live in a city. I know sparrows from starlings. After that
everything is a duck as far as I'm concerned. -- Monstrous Regiment
next prev parent reply other threads:[~2020-01-24 0:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-22 16:07 [PATCH v4 0/6] hwmon: k10temp driver improvements Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 1/6] hwmon: (k10temp) Use bitops Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 2/6] hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 3/6] hwmon: (k10temp) Report temperatures per CPU die Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 4/6] hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs Guenter Roeck
2020-01-22 16:07 ` [PATCH v4 5/6] hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs Guenter Roeck
2020-01-22 16:08 ` [PATCH v4 6/6] hwmon: (k10temp) Add debugfs support Guenter Roeck
2020-01-24 0:01 ` Ken Moffat [this message]
2020-01-24 4:47 ` Guenter Roeck
2020-01-22 19:05 ` [PATCH v4 0/6] hwmon: k10temp driver improvements Sebastian Reichel
2020-01-22 19:37 ` Guenter Roeck
2020-01-25 17:40 ` Holger Kiehl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CANVEwpbeT_O=4TZu7RuRupwOGTNEVWSnHXvMsEqEmeKqmu92jw@mail.gmail.com' \
--to=zarniwhoop73@googlemail.com \
--cc=Holger.Kiehl@dwd.de \
--cc=bernhard.gebetsberger@gmx.at \
--cc=clemens@ladisch.de \
--cc=devspam@moreofthesa.me.uk \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lists2009@fnarfbargle.com \
--cc=michael@phoronix.com \
--cc=noodles@earth.li \
--cc=ocerman@sda1.eu \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).