* [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module
@ 2019-04-10 10:47 Jean Delvare
2019-04-10 10:56 ` [PATCH v2 2/2] hwmon: OCC drivers are ARM-only Jean Delvare
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Jean Delvare @ 2019-04-10 10:47 UTC (permalink / raw)
To: linux-hwmon; +Cc: Eddie James, Guenter Roeck
Instead of duplicating the common code into the 2 (binary) drivers,
move the common code to a separate module. This is cleaner.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
---
Eddie, can you please give it a try and confirm it works?
Note: I kept the module names as they were before, hence the extra
"*-objs :=" statements. They could be removed if we rename the source
files, but that's better done in git directly. I don't mind either way
personally.
drivers/hwmon/occ/Kconfig | 3 +--
drivers/hwmon/occ/Makefile | 6 ++++--
drivers/hwmon/occ/common.c | 7 +++++++
drivers/hwmon/occ/sysfs.c | 2 ++
4 files changed, 14 insertions(+), 4 deletions(-)
--- linux-5.0.orig/drivers/hwmon/occ/Kconfig 2019-04-10 11:30:05.579537638 +0200
+++ linux-5.0/drivers/hwmon/occ/Kconfig 2019-04-10 11:31:20.843383376 +0200
@@ -27,5 +27,4 @@ config SENSORS_OCC_P9_SBE
called occ-p9-hwmon.
config SENSORS_OCC
- bool "POWER On-Chip Controller"
- depends on SENSORS_OCC_P8_I2C || SENSORS_OCC_P9_SBE
+ tristate
--- linux-5.0.orig/drivers/hwmon/occ/Makefile 2019-03-04 00:21:29.000000000 +0100
+++ linux-5.0/drivers/hwmon/occ/Makefile 2019-04-10 11:33:23.631765535 +0200
@@ -1,5 +1,7 @@
-occ-p8-hwmon-objs := common.o sysfs.o p8_i2c.o
-occ-p9-hwmon-objs := common.o sysfs.o p9_sbe.o
+occ-hwmon-common-objs := common.o sysfs.o
+occ-p8-hwmon-objs := p8_i2c.o
+occ-p9-hwmon-objs := p9_sbe.o
+obj-$(CONFIG_SENSORS_OCC) += occ-hwmon-common.o
obj-$(CONFIG_SENSORS_OCC_P8_I2C) += occ-p8-hwmon.o
obj-$(CONFIG_SENSORS_OCC_P9_SBE) += occ-p9-hwmon.o
--- linux-5.0.orig/drivers/hwmon/occ/common.c 2019-03-04 00:21:29.000000000 +0100
+++ linux-5.0/drivers/hwmon/occ/common.c 2019-04-10 11:44:53.035573580 +0200
@@ -1,11 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/math64.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <asm/unaligned.h>
@@ -1096,3 +1098,8 @@ int occ_setup(struct occ *occ, const cha
return rc;
}
+EXPORT_SYMBOL_GPL(occ_setup);
+
+MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
+MODULE_DESCRIPTION("Common OCC hwmon code");
+MODULE_LICENSE("GPL");
--- linux-5.0.orig/drivers/hwmon/occ/sysfs.c 2019-03-04 00:21:29.000000000 +0100
+++ linux-5.0/drivers/hwmon/occ/sysfs.c 2019-04-10 11:39:38.627003382 +0200
@@ -12,6 +12,7 @@
#include <linux/bitops.h>
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/hwmon-sysfs.h>
#include <linux/kernel.h>
#include <linux/sysfs.h>
@@ -186,3 +187,4 @@ void occ_shutdown(struct occ *occ)
{
sysfs_remove_group(&occ->bus_dev->kobj, &occ_sysfs);
}
+EXPORT_SYMBOL_GPL(occ_shutdown);
--
Jean Delvare
SUSE L3 Support
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v2 2/2] hwmon: OCC drivers are ARM-only
2019-04-10 10:47 [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module Jean Delvare
@ 2019-04-10 10:56 ` Jean Delvare
2019-04-10 18:03 ` Eddie James
2019-04-10 18:02 ` [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module Eddie James
2019-04-10 18:21 ` Guenter Roeck
2 siblings, 1 reply; 7+ messages in thread
From: Jean Delvare @ 2019-04-10 10:56 UTC (permalink / raw)
To: linux-hwmon; +Cc: Eddie James, Guenter Roeck
These drivers are for a BMC inside PowerPC servers. The BMC runs on
ARM hardware, so only propose the drivers on this architecture, unless
build-testing.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
---
If PowerPC BMCs are ever based on another architecture and these drivers
are compatible with them, then the list can be extended.
drivers/hwmon/occ/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- linux-5.0.orig/drivers/hwmon/occ/Kconfig 2019-04-10 11:54:07.014895111 +0200
+++ linux-5.0/drivers/hwmon/occ/Kconfig 2019-04-10 12:12:27.379725640 +0200
@@ -5,6 +5,7 @@
config SENSORS_OCC_P8_I2C
tristate "POWER8 OCC through I2C"
depends on I2C
+ depends on ARM || ARM64 || COMPILE_TEST
select SENSORS_OCC
help
This option enables support for monitoring sensors provided by the
@@ -17,6 +18,7 @@ config SENSORS_OCC_P8_I2C
config SENSORS_OCC_P9_SBE
tristate "POWER9 OCC through SBE"
depends on FSI_OCC
+ depends on ARM || ARM64 || COMPILE_TEST
select SENSORS_OCC
help
This option enables support for monitoring sensors provided by the
--
Jean Delvare
SUSE L3 Support
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] hwmon: OCC drivers are ARM-only
2019-04-10 10:56 ` [PATCH v2 2/2] hwmon: OCC drivers are ARM-only Jean Delvare
@ 2019-04-10 18:03 ` Eddie James
0 siblings, 0 replies; 7+ messages in thread
From: Eddie James @ 2019-04-10 18:03 UTC (permalink / raw)
To: Jean Delvare, linux-hwmon; +Cc: Guenter Roeck
On 4/10/19 5:56 AM, Jean Delvare wrote:
> These drivers are for a BMC inside PowerPC servers. The BMC runs on
> ARM hardware, so only propose the drivers on this architecture, unless
> build-testing.
Thanks!
Reviewed-by: Eddie James <eajames@linux.ibm.com>
>
> Signed-off-by: Jean Delvare <jdelvare@suse.de>
> Cc: Eddie James <eajames@linux.ibm.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> ---
> If PowerPC BMCs are ever based on another architecture and these drivers
> are compatible with them, then the list can be extended.
>
> drivers/hwmon/occ/Kconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> --- linux-5.0.orig/drivers/hwmon/occ/Kconfig 2019-04-10 11:54:07.014895111 +0200
> +++ linux-5.0/drivers/hwmon/occ/Kconfig 2019-04-10 12:12:27.379725640 +0200
> @@ -5,6 +5,7 @@
> config SENSORS_OCC_P8_I2C
> tristate "POWER8 OCC through I2C"
> depends on I2C
> + depends on ARM || ARM64 || COMPILE_TEST
> select SENSORS_OCC
> help
> This option enables support for monitoring sensors provided by the
> @@ -17,6 +18,7 @@ config SENSORS_OCC_P8_I2C
> config SENSORS_OCC_P9_SBE
> tristate "POWER9 OCC through SBE"
> depends on FSI_OCC
> + depends on ARM || ARM64 || COMPILE_TEST
> select SENSORS_OCC
> help
> This option enables support for monitoring sensors provided by the
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module
2019-04-10 10:47 [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module Jean Delvare
2019-04-10 10:56 ` [PATCH v2 2/2] hwmon: OCC drivers are ARM-only Jean Delvare
@ 2019-04-10 18:02 ` Eddie James
2019-04-11 11:03 ` Jean Delvare
2019-04-10 18:21 ` Guenter Roeck
2 siblings, 1 reply; 7+ messages in thread
From: Eddie James @ 2019-04-10 18:02 UTC (permalink / raw)
To: Jean Delvare, linux-hwmon; +Cc: Guenter Roeck
On 4/10/19 5:47 AM, Jean Delvare wrote:
> Instead of duplicating the common code into the 2 (binary) drivers,
> move the common code to a separate module. This is cleaner.
>
> Signed-off-by: Jean Delvare <jdelvare@suse.de>
> Cc: Eddie James <eajames@linux.ibm.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> ---
> Eddie, can you please give it a try and confirm it works?
Yes, this works well.
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Eddie James <eajames@linux.ibm.com>
>
> Note: I kept the module names as they were before, hence the extra
> "*-objs :=" statements. They could be removed if we rename the source
> files, but that's better done in git directly. I don't mind either way
> personally.
>
> drivers/hwmon/occ/Kconfig | 3 +--
> drivers/hwmon/occ/Makefile | 6 ++++--
> drivers/hwmon/occ/common.c | 7 +++++++
> drivers/hwmon/occ/sysfs.c | 2 ++
> 4 files changed, 14 insertions(+), 4 deletions(-)
>
> --- linux-5.0.orig/drivers/hwmon/occ/Kconfig 2019-04-10 11:30:05.579537638 +0200
> +++ linux-5.0/drivers/hwmon/occ/Kconfig 2019-04-10 11:31:20.843383376 +0200
> @@ -27,5 +27,4 @@ config SENSORS_OCC_P9_SBE
> called occ-p9-hwmon.
>
> config SENSORS_OCC
> - bool "POWER On-Chip Controller"
> - depends on SENSORS_OCC_P8_I2C || SENSORS_OCC_P9_SBE
> + tristate
> --- linux-5.0.orig/drivers/hwmon/occ/Makefile 2019-03-04 00:21:29.000000000 +0100
> +++ linux-5.0/drivers/hwmon/occ/Makefile 2019-04-10 11:33:23.631765535 +0200
> @@ -1,5 +1,7 @@
> -occ-p8-hwmon-objs := common.o sysfs.o p8_i2c.o
> -occ-p9-hwmon-objs := common.o sysfs.o p9_sbe.o
> +occ-hwmon-common-objs := common.o sysfs.o
> +occ-p8-hwmon-objs := p8_i2c.o
> +occ-p9-hwmon-objs := p9_sbe.o
>
> +obj-$(CONFIG_SENSORS_OCC) += occ-hwmon-common.o
> obj-$(CONFIG_SENSORS_OCC_P8_I2C) += occ-p8-hwmon.o
> obj-$(CONFIG_SENSORS_OCC_P9_SBE) += occ-p9-hwmon.o
> --- linux-5.0.orig/drivers/hwmon/occ/common.c 2019-03-04 00:21:29.000000000 +0100
> +++ linux-5.0/drivers/hwmon/occ/common.c 2019-04-10 11:44:53.035573580 +0200
> @@ -1,11 +1,13 @@
> // SPDX-License-Identifier: GPL-2.0
>
> #include <linux/device.h>
> +#include <linux/export.h>
> #include <linux/hwmon.h>
> #include <linux/hwmon-sysfs.h>
> #include <linux/jiffies.h>
> #include <linux/kernel.h>
> #include <linux/math64.h>
> +#include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/sysfs.h>
> #include <asm/unaligned.h>
> @@ -1096,3 +1098,8 @@ int occ_setup(struct occ *occ, const cha
>
> return rc;
> }
> +EXPORT_SYMBOL_GPL(occ_setup);
> +
> +MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
> +MODULE_DESCRIPTION("Common OCC hwmon code");
> +MODULE_LICENSE("GPL");
> --- linux-5.0.orig/drivers/hwmon/occ/sysfs.c 2019-03-04 00:21:29.000000000 +0100
> +++ linux-5.0/drivers/hwmon/occ/sysfs.c 2019-04-10 11:39:38.627003382 +0200
> @@ -12,6 +12,7 @@
>
> #include <linux/bitops.h>
> #include <linux/device.h>
> +#include <linux/export.h>
> #include <linux/hwmon-sysfs.h>
> #include <linux/kernel.h>
> #include <linux/sysfs.h>
> @@ -186,3 +187,4 @@ void occ_shutdown(struct occ *occ)
> {
> sysfs_remove_group(&occ->bus_dev->kobj, &occ_sysfs);
> }
> +EXPORT_SYMBOL_GPL(occ_shutdown);
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module
2019-04-10 18:02 ` [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module Eddie James
@ 2019-04-11 11:03 ` Jean Delvare
0 siblings, 0 replies; 7+ messages in thread
From: Jean Delvare @ 2019-04-11 11:03 UTC (permalink / raw)
To: Eddie James; +Cc: linux-hwmon, Guenter Roeck
On Wed, 10 Apr 2019 13:02:32 -0500, Eddie James wrote:
> On 4/10/19 5:47 AM, Jean Delvare wrote:
> > Instead of duplicating the common code into the 2 (binary) drivers,
> > move the common code to a separate module. This is cleaner.
> >
> > Signed-off-by: Jean Delvare <jdelvare@suse.de>
> > Cc: Eddie James <eajames@linux.ibm.com>
> > Cc: Guenter Roeck <linux@roeck-us.net>
> > ---
> > Eddie, can you please give it a try and confirm it works?
>
>
> Yes, this works well.
>
> Reviewed-by: Eddie James <eajames@linux.ibm.com>
>
> Tested-by: Eddie James <eajames@linux.ibm.com>
Thanks. Can you please send a patch on top of that updating the help
texts in Kconfig to explain that the drivers are for the BMC and not
for the PowerPC host OS, as discussed before?
Thanks,
--
Jean Delvare
SUSE L3 Support
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module
2019-04-10 10:47 [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module Jean Delvare
2019-04-10 10:56 ` [PATCH v2 2/2] hwmon: OCC drivers are ARM-only Jean Delvare
2019-04-10 18:02 ` [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module Eddie James
@ 2019-04-10 18:21 ` Guenter Roeck
2019-04-10 18:25 ` Guenter Roeck
2 siblings, 1 reply; 7+ messages in thread
From: Guenter Roeck @ 2019-04-10 18:21 UTC (permalink / raw)
To: Jean Delvare; +Cc: linux-hwmon, Eddie James
Jean,
On Wed, Apr 10, 2019 at 12:47:26PM +0200, Jean Delvare wrote:
> Instead of duplicating the common code into the 2 (binary) drivers,
> move the common code to a separate module. This is cleaner.
>
> Signed-off-by: Jean Delvare <jdelvare@suse.de>
> Cc: Eddie James <eajames@linux.ibm.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
what is the parent release for this patch ? I tried to apply it to mainline
and to hwmon-next using git am, but both failed.
Thanks,
Guenter
> ---
> Eddie, can you please give it a try and confirm it works?
>
> Note: I kept the module names as they were before, hence the extra
> "*-objs :=" statements. They could be removed if we rename the source
> files, but that's better done in git directly. I don't mind either way
> personally.
>
> drivers/hwmon/occ/Kconfig | 3 +--
> drivers/hwmon/occ/Makefile | 6 ++++--
> drivers/hwmon/occ/common.c | 7 +++++++
> drivers/hwmon/occ/sysfs.c | 2 ++
> 4 files changed, 14 insertions(+), 4 deletions(-)
>
> --- linux-5.0.orig/drivers/hwmon/occ/Kconfig 2019-04-10 11:30:05.579537638 +0200
> +++ linux-5.0/drivers/hwmon/occ/Kconfig 2019-04-10 11:31:20.843383376 +0200
> @@ -27,5 +27,4 @@ config SENSORS_OCC_P9_SBE
> called occ-p9-hwmon.
>
> config SENSORS_OCC
> - bool "POWER On-Chip Controller"
> - depends on SENSORS_OCC_P8_I2C || SENSORS_OCC_P9_SBE
> + tristate
> --- linux-5.0.orig/drivers/hwmon/occ/Makefile 2019-03-04 00:21:29.000000000 +0100
> +++ linux-5.0/drivers/hwmon/occ/Makefile 2019-04-10 11:33:23.631765535 +0200
> @@ -1,5 +1,7 @@
> -occ-p8-hwmon-objs := common.o sysfs.o p8_i2c.o
> -occ-p9-hwmon-objs := common.o sysfs.o p9_sbe.o
> +occ-hwmon-common-objs := common.o sysfs.o
> +occ-p8-hwmon-objs := p8_i2c.o
> +occ-p9-hwmon-objs := p9_sbe.o
>
> +obj-$(CONFIG_SENSORS_OCC) += occ-hwmon-common.o
> obj-$(CONFIG_SENSORS_OCC_P8_I2C) += occ-p8-hwmon.o
> obj-$(CONFIG_SENSORS_OCC_P9_SBE) += occ-p9-hwmon.o
> --- linux-5.0.orig/drivers/hwmon/occ/common.c 2019-03-04 00:21:29.000000000 +0100
> +++ linux-5.0/drivers/hwmon/occ/common.c 2019-04-10 11:44:53.035573580 +0200
> @@ -1,11 +1,13 @@
> // SPDX-License-Identifier: GPL-2.0
>
> #include <linux/device.h>
> +#include <linux/export.h>
> #include <linux/hwmon.h>
> #include <linux/hwmon-sysfs.h>
> #include <linux/jiffies.h>
> #include <linux/kernel.h>
> #include <linux/math64.h>
> +#include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/sysfs.h>
> #include <asm/unaligned.h>
> @@ -1096,3 +1098,8 @@ int occ_setup(struct occ *occ, const cha
>
> return rc;
> }
> +EXPORT_SYMBOL_GPL(occ_setup);
> +
> +MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
> +MODULE_DESCRIPTION("Common OCC hwmon code");
> +MODULE_LICENSE("GPL");
> --- linux-5.0.orig/drivers/hwmon/occ/sysfs.c 2019-03-04 00:21:29.000000000 +0100
> +++ linux-5.0/drivers/hwmon/occ/sysfs.c 2019-04-10 11:39:38.627003382 +0200
> @@ -12,6 +12,7 @@
>
> #include <linux/bitops.h>
> #include <linux/device.h>
> +#include <linux/export.h>
> #include <linux/hwmon-sysfs.h>
> #include <linux/kernel.h>
> #include <linux/sysfs.h>
> @@ -186,3 +187,4 @@ void occ_shutdown(struct occ *occ)
> {
> sysfs_remove_group(&occ->bus_dev->kobj, &occ_sysfs);
> }
> +EXPORT_SYMBOL_GPL(occ_shutdown);
>
>
> --
> Jean Delvare
> SUSE L3 Support
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module
2019-04-10 18:21 ` Guenter Roeck
@ 2019-04-10 18:25 ` Guenter Roeck
0 siblings, 0 replies; 7+ messages in thread
From: Guenter Roeck @ 2019-04-10 18:25 UTC (permalink / raw)
To: Jean Delvare; +Cc: linux-hwmon, Eddie James
On Wed, Apr 10, 2019 at 11:21:47AM -0700, Guenter Roeck wrote:
> Jean,
>
> On Wed, Apr 10, 2019 at 12:47:26PM +0200, Jean Delvare wrote:
> > Instead of duplicating the common code into the 2 (binary) drivers,
> > move the common code to a separate module. This is cleaner.
> >
> > Signed-off-by: Jean Delvare <jdelvare@suse.de>
> > Cc: Eddie James <eajames@linux.ibm.com>
> > Cc: Guenter Roeck <linux@roeck-us.net>
>
> what is the parent release for this patch ? I tried to apply it to mainline
> and to hwmon-next using git am, but both failed.
>
Never mind, found it - v5.0. Both patches applied to hwmon-next.
Thanks,
Guenter
> Thanks,
> Guenter
>
> > ---
> > Eddie, can you please give it a try and confirm it works?
> >
> > Note: I kept the module names as they were before, hence the extra
> > "*-objs :=" statements. They could be removed if we rename the source
> > files, but that's better done in git directly. I don't mind either way
> > personally.
> >
> > drivers/hwmon/occ/Kconfig | 3 +--
> > drivers/hwmon/occ/Makefile | 6 ++++--
> > drivers/hwmon/occ/common.c | 7 +++++++
> > drivers/hwmon/occ/sysfs.c | 2 ++
> > 4 files changed, 14 insertions(+), 4 deletions(-)
> >
> > --- linux-5.0.orig/drivers/hwmon/occ/Kconfig 2019-04-10 11:30:05.579537638 +0200
> > +++ linux-5.0/drivers/hwmon/occ/Kconfig 2019-04-10 11:31:20.843383376 +0200
> > @@ -27,5 +27,4 @@ config SENSORS_OCC_P9_SBE
> > called occ-p9-hwmon.
> >
> > config SENSORS_OCC
> > - bool "POWER On-Chip Controller"
> > - depends on SENSORS_OCC_P8_I2C || SENSORS_OCC_P9_SBE
> > + tristate
> > --- linux-5.0.orig/drivers/hwmon/occ/Makefile 2019-03-04 00:21:29.000000000 +0100
> > +++ linux-5.0/drivers/hwmon/occ/Makefile 2019-04-10 11:33:23.631765535 +0200
> > @@ -1,5 +1,7 @@
> > -occ-p8-hwmon-objs := common.o sysfs.o p8_i2c.o
> > -occ-p9-hwmon-objs := common.o sysfs.o p9_sbe.o
> > +occ-hwmon-common-objs := common.o sysfs.o
> > +occ-p8-hwmon-objs := p8_i2c.o
> > +occ-p9-hwmon-objs := p9_sbe.o
> >
> > +obj-$(CONFIG_SENSORS_OCC) += occ-hwmon-common.o
> > obj-$(CONFIG_SENSORS_OCC_P8_I2C) += occ-p8-hwmon.o
> > obj-$(CONFIG_SENSORS_OCC_P9_SBE) += occ-p9-hwmon.o
> > --- linux-5.0.orig/drivers/hwmon/occ/common.c 2019-03-04 00:21:29.000000000 +0100
> > +++ linux-5.0/drivers/hwmon/occ/common.c 2019-04-10 11:44:53.035573580 +0200
> > @@ -1,11 +1,13 @@
> > // SPDX-License-Identifier: GPL-2.0
> >
> > #include <linux/device.h>
> > +#include <linux/export.h>
> > #include <linux/hwmon.h>
> > #include <linux/hwmon-sysfs.h>
> > #include <linux/jiffies.h>
> > #include <linux/kernel.h>
> > #include <linux/math64.h>
> > +#include <linux/module.h>
> > #include <linux/mutex.h>
> > #include <linux/sysfs.h>
> > #include <asm/unaligned.h>
> > @@ -1096,3 +1098,8 @@ int occ_setup(struct occ *occ, const cha
> >
> > return rc;
> > }
> > +EXPORT_SYMBOL_GPL(occ_setup);
> > +
> > +MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
> > +MODULE_DESCRIPTION("Common OCC hwmon code");
> > +MODULE_LICENSE("GPL");
> > --- linux-5.0.orig/drivers/hwmon/occ/sysfs.c 2019-03-04 00:21:29.000000000 +0100
> > +++ linux-5.0/drivers/hwmon/occ/sysfs.c 2019-04-10 11:39:38.627003382 +0200
> > @@ -12,6 +12,7 @@
> >
> > #include <linux/bitops.h>
> > #include <linux/device.h>
> > +#include <linux/export.h>
> > #include <linux/hwmon-sysfs.h>
> > #include <linux/kernel.h>
> > #include <linux/sysfs.h>
> > @@ -186,3 +187,4 @@ void occ_shutdown(struct occ *occ)
> > {
> > sysfs_remove_group(&occ->bus_dev->kobj, &occ_sysfs);
> > }
> > +EXPORT_SYMBOL_GPL(occ_shutdown);
> >
> >
> > --
> > Jean Delvare
> > SUSE L3 Support
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-04-11 11:03 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-10 10:47 [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module Jean Delvare
2019-04-10 10:56 ` [PATCH v2 2/2] hwmon: OCC drivers are ARM-only Jean Delvare
2019-04-10 18:03 ` Eddie James
2019-04-10 18:02 ` [PATCH v2 1/2] hwmon: (occ) Move common code to a separate module Eddie James
2019-04-11 11:03 ` Jean Delvare
2019-04-10 18:21 ` Guenter Roeck
2019-04-10 18:25 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).