Linux-HyperV Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] PCI: hv: Fix a race condition when removing the device
@ 2021-04-19 19:20 longli
  2021-04-21 17:33 ` Michael Kelley
  0 siblings, 1 reply; 7+ messages in thread
From: longli @ 2021-04-19 19:20 UTC (permalink / raw)
  To: K. Y. Srinivasan, Haiyang Zhang, Stephen Hemminger, Wei Liu,
	Lorenzo Pieralisi, Rob Herring, Bjorn Helgaas, linux-hyperv,
	linux-pci, linux-kernel
  Cc: Long Li

From: Long Li <longli@microsoft.com>

On removing the device, any work item (hv_pci_devices_present() or
hv_pci_eject_device()) scheduled on workqueue hbus->wq may still be running
and race with hv_pci_remove().

This can happen because the host may send PCI_EJECT or PCI_BUS_RELATIONS(2)
and decide to rescind the channel immediately after that.

Fix this by flushing/stopping the workqueue of hbus before doing hbus remove.

Signed-off-by: Long Li <longli@microsoft.com>
---
 drivers/pci/controller/pci-hyperv.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 27a17a1e4a7c..116815404313 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -3305,6 +3305,17 @@ static int hv_pci_remove(struct hv_device *hdev)
 
 	hbus = hv_get_drvdata(hdev);
 	if (hbus->state == hv_pcibus_installed) {
+		tasklet_disable(&hdev->channel->callback_event);
+		hbus->state = hv_pcibus_removing;
+		tasklet_enable(&hdev->channel->callback_event);
+
+		flush_workqueue(hbus->wq);
+		/*
+		 * At this point, no work is running or can be scheduled
+		 * on hbus-wq. We can't race with hv_pci_devices_present()
+		 * or hv_pci_eject_device(), it's safe to proceed.
+		 */
+
 		/* Remove the bus from PCI's point of view. */
 		pci_lock_rescan_remove();
 		pci_stop_root_bus(hbus->pci_bus);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-19 19:20 [PATCH] PCI: hv: Fix a race condition when removing the device longli
2021-04-21 17:33 ` Michael Kelley
2021-04-21 19:56   ` Long Li
2021-04-21 21:05     ` Michael Kelley
2021-04-22  2:31       ` Dexuan Cui
2021-04-22  3:57         ` Long Li
2021-04-22  4:19           ` Long Li

Linux-HyperV Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hyperv/0 linux-hyperv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hyperv linux-hyperv/ https://lore.kernel.org/linux-hyperv \
		linux-hyperv@vger.kernel.org
	public-inbox-index linux-hyperv

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hyperv


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git