[PATCH v7 0/5] i2c: aspeed: added driver for Aspeed I2C

[PATCH v7 0/5] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

Addressed comments from:
  - Ben in: http://www.spinics.net/lists/devicetree/msg170491.html
    and: http://www.spinics.net/lists/devicetree/msg171232.html
  - Rob: http://www.spinics.net/lists/devicetree/msg171593.html
  - Joel in: http://www.spinics.net/lists/devicetree/msg171204.html

Changes since previous update:
  - Renamed irq domain for consistency
  - Changed clock-frequency to bus-frequency in device tree
  - Made some fixes to clock divider code
  - Added hardware reset function
  - Marked functions that need to be called with the lock held as "unlocked"
  - Did a bunch of clean up

Looks like there still might be some more work to do with multi-master support
and the clock divider stuff, but I will leave that up for others to decide.

As before, tested on Aspeed 2500 evaluation board and a real platform with an
Aspeed 2520.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7 3/5] i2c: aspeed: added documentation for Aspeed I2C driver

[Brendan Higgins]

Added device tree binding documentation for Aspeed I2C busses.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
---
Changes for v2:
  - None
Changes for v3:
  - Removed reference to "bus" device tree param
Changes for v4:
  - None
Changes for v5:
  - None
Changes for v6:
  - Replaced the controller property with and interrupt controller, leaving only
    the busses in the I2C documentation.
Changes for v7:
  - Changed clock-frequency to bus-frequency in device tree
---
 .../devicetree/bindings/i2c/i2c-aspeed.txt         | 47 ++++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
new file mode 100644
index 000000000000..08ae65251080
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -0,0 +1,47 @@
+Device tree configuration for the I2C busses on the AST24XX and AST25XX SoCs.
+
+Required Properties:
+- #address-cells	: should be 1
+- #size-cells		: should be 0
+- reg			: address offset and range of bus
+- compatible		: should be "aspeed,ast2400-i2c-bus"
+			  or "aspeed,ast2500-i2c-bus"
+- clocks		: root clock of bus, should reference the APB
+			  clock
+- interrupts		: interrupt number
+- interrupt-parent	: interrupt controller for bus, should reference a
+			  aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic
+			  interrupt controller
+
+Optional Properties:
+- bus-frequency	: frequency of the bus clock in Hz defaults to 100 kHz when not
+		  specified
+
+Example:
+
+i2c {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x1e78a000 0x1000>;
+
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2400-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&clk_apb>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+	};
+};
-- 
2.12.2.816.g2cccc81164-goog

Re: [PATCH v7 3/5] i2c: aspeed: added documentation for Aspeed I2C driver

[Rob Herring]

On Mon, Apr 24, 2017 at 11:18:16AM -0700, Brendan Higgins wrote:
> Added device tree binding documentation for Aspeed I2C busses.
> 
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> ---
> Changes for v2:
>   - None
> Changes for v3:
>   - Removed reference to "bus" device tree param
> Changes for v4:
>   - None
> Changes for v5:
>   - None
> Changes for v6:
>   - Replaced the controller property with and interrupt controller, leaving only
>     the busses in the I2C documentation.
> Changes for v7:
>   - Changed clock-frequency to bus-frequency in device tree
> ---
>  .../devicetree/bindings/i2c/i2c-aspeed.txt         | 47 ++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v7 4/5] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

Added initial master support for Aspeed I2C controller. Supports
fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
---
Changes for v2:
  - Added single module_init (multiple was breaking some builds).
Changes for v3:
  - Removed "bus" device tree param; now extracted from bus address offset
Changes for v4:
  - I2C adapter number is now generated dynamically unless specified in alias.
Changes for v5:
  - Removed irq_chip used to multiplex IRQ and replaced it with dummy_irq_chip
    along with some other IRQ cleanup.
  - Addressed comments from Cedric, and Vladimir, mostly stylistic things and
    using devm managed resources.
  - Increased max clock frequency before the bus is put in HighSpeed mode, as
    per Kachalov's comment.
Changes for v6:
  - No longer arbitrarily restrict bus to be slave xor master.
  - Pulled out "struct aspeed_i2c_controller" as a interrupt controller.
  - Pulled out slave support into its own commit.
  - Rewrote code that sets clock divider register because the original version
    set it incorrectly.
  - Rewrote the aspeed_i2c_master_irq handler because the old method of
    completing a completion in between restarts was too slow causing devices to
    misbehave.
  - Added support for I2C_M_RECV_LEN which I had incorrectly said was supported
    before.
  - Addressed other comments from Vladimir.
Changes for v7:
  - Changed clock-frequency to bus-frequency
  - Made some fixes to clock divider code
  - Added hardware reset function
  - Marked functions that need to be called with the lock held as "unlocked"
  - Did a bunch of clean up
---
 drivers/i2c/busses/Kconfig      |  10 +
 drivers/i2c/busses/Makefile     |   1 +
 drivers/i2c/busses/i2c-aspeed.c | 689 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 700 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-aspeed.c

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8adc0f1d7ad0..48fca492ec2f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -326,6 +326,16 @@ config I2C_POWERMAC
 
 comment "I2C system bus drivers (mostly embedded / system-on-chip)"
 
+config I2C_ASPEED
+	tristate "Aspeed I2C Controller"
+	depends on ARCH_ASPEED
+	help
+	  If you say yes to this option, support will be included for the
+	  Aspeed I2C controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-aspeed.
+
 config I2C_AT91
 	tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
 	depends on ARCH_AT91
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 30b60855fbcd..e84604b9bf3b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
 obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 
 # Embedded system I2C/SMBus host controller drivers
+obj-$(CONFIG_I2C_ASPEED)	+= i2c-aspeed.o
 obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_AXXIA)		+= i2c-axxia.o
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
new file mode 100644
index 000000000000..778bcaa4ccf4
--- /dev/null
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -0,0 +1,689 @@
+/*
+ *  Aspeed 24XX/25XX I2C Controller.
+ *
+ *  Copyright (C) 2012-2017 ASPEED Technology Inc.
+ *  Copyright 2017 IBM Corporation
+ *  Copyright 2017 Google, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* I2C Register */
+#define ASPEED_I2C_FUN_CTRL_REG				0x00
+#define ASPEED_I2C_AC_TIMING_REG1			0x04
+#define ASPEED_I2C_AC_TIMING_REG2			0x08
+#define ASPEED_I2C_INTR_CTRL_REG			0x0c
+#define ASPEED_I2C_INTR_STS_REG				0x10
+#define ASPEED_I2C_CMD_REG				0x14
+#define ASPEED_I2C_DEV_ADDR_REG				0x18
+#define ASPEED_I2C_BYTE_BUF_REG				0x20
+
+/* Global Register Definition */
+/* 0x00 : I2C Interrupt Status Register  */
+/* 0x08 : I2C Interrupt Target Assignment  */
+
+/* Device Register Definition */
+/* 0x00 : I2CD Function Control Register  */
+#define ASPEED_I2CD_MULTI_MASTER_DIS			BIT(15)
+#define ASPEED_I2CD_SDA_DRIVE_1T_EN			BIT(8)
+#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN			BIT(7)
+#define ASPEED_I2CD_M_HIGH_SPEED_EN			BIT(6)
+#define ASPEED_I2CD_MASTER_EN				BIT(0)
+
+/* 0x04 : I2CD Clock and AC Timing Control Register #1 */
+#define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT			16
+#define ASPEED_I2CD_TIME_SCL_HIGH_MASK			GENMASK(19, 16)
+#define ASPEED_I2CD_TIME_SCL_LOW_SHIFT			12
+#define ASPEED_I2CD_TIME_SCL_LOW_MASK			GENMASK(15, 12)
+#define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK		GENMASK(3, 0)
+#define ASPEED_I2CD_TIME_SCL_REG_MAX			GENMASK(3, 0)
+/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
+#define ASPEED_NO_TIMEOUT_CTRL				0
+
+/* 0x0c : I2CD Interrupt Control Register &
+ * 0x10 : I2CD Interrupt Status Register
+ *
+ * These share bit definitions, so use the same values for the enable &
+ * status bits.
+ */
+#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
+#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
+#define ASPEED_I2CD_INTR_SCL_TIMEOUT			BIT(6)
+#define ASPEED_I2CD_INTR_ABNORMAL			BIT(5)
+#define ASPEED_I2CD_INTR_NORMAL_STOP			BIT(4)
+#define ASPEED_I2CD_INTR_ARBIT_LOSS			BIT(3)
+#define ASPEED_I2CD_INTR_RX_DONE			BIT(2)
+#define ASPEED_I2CD_INTR_TX_NAK				BIT(1)
+#define ASPEED_I2CD_INTR_TX_ACK				BIT(0)
+#define ASPEED_I2CD_INTR_ERROR						       \
+		(ASPEED_I2CD_INTR_ARBIT_LOSS |				       \
+		 ASPEED_I2CD_INTR_ABNORMAL |				       \
+		 ASPEED_I2CD_INTR_SCL_TIMEOUT |				       \
+		 ASPEED_I2CD_INTR_SDA_DL_TIMEOUT)
+#define ASPEED_I2CD_INTR_ALL						       \
+		(ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |			       \
+		 ASPEED_I2CD_INTR_BUS_RECOVER_DONE |			       \
+		 ASPEED_I2CD_INTR_SCL_TIMEOUT |				       \
+		 ASPEED_I2CD_INTR_ABNORMAL |				       \
+		 ASPEED_I2CD_INTR_NORMAL_STOP |				       \
+		 ASPEED_I2CD_INTR_ARBIT_LOSS |				       \
+		 ASPEED_I2CD_INTR_RX_DONE |				       \
+		 ASPEED_I2CD_INTR_TX_NAK |				       \
+		 ASPEED_I2CD_INTR_TX_ACK)
+
+/* 0x14 : I2CD Command/Status Register   */
+#define ASPEED_I2CD_SCL_LINE_STS			BIT(18)
+#define ASPEED_I2CD_SDA_LINE_STS			BIT(17)
+#define ASPEED_I2CD_BUS_BUSY_STS			BIT(16)
+#define ASPEED_I2CD_BUS_RECOVER_CMD			BIT(11)
+
+/* Command Bit */
+#define ASPEED_I2CD_M_STOP_CMD				BIT(5)
+#define ASPEED_I2CD_M_S_RX_CMD_LAST			BIT(4)
+#define ASPEED_I2CD_M_RX_CMD				BIT(3)
+#define ASPEED_I2CD_S_TX_CMD				BIT(2)
+#define ASPEED_I2CD_M_TX_CMD				BIT(1)
+#define ASPEED_I2CD_M_START_CMD				BIT(0)
+
+enum aspeed_i2c_master_state {
+	ASPEED_I2C_MASTER_START,
+	ASPEED_I2C_MASTER_TX_FIRST,
+	ASPEED_I2C_MASTER_TX,
+	ASPEED_I2C_MASTER_RX_FIRST,
+	ASPEED_I2C_MASTER_RX,
+	ASPEED_I2C_MASTER_STOP,
+	ASPEED_I2C_MASTER_INACTIVE,
+};
+
+struct aspeed_i2c_bus {
+	struct i2c_adapter		adap;
+	struct device			*dev;
+	void __iomem			*base;
+	/* Synchronizes I/O mem access to base. */
+	spinlock_t			lock;
+	struct completion		cmd_complete;
+	int				irq;
+	/* Transaction state. */
+	enum aspeed_i2c_master_state	master_state;
+	struct i2c_msg			*msgs;
+	size_t				buf_index;
+	size_t				msgs_index;
+	size_t				msgs_count;
+	bool				send_stop;
+	int				cmd_err;
+};
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
+
+static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
+{
+	unsigned long time_left, flags;
+	int ret = 0;
+	u32 command;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+
+	if (command & ASPEED_I2CD_SDA_LINE_STS) {
+		/* Bus is idle: no recovery needed. */
+		if (command & ASPEED_I2CD_SCL_LINE_STS)
+			goto out;
+		dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
+			command);
+
+		reinit_completion(&bus->cmd_complete);
+		writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_timeout(
+				&bus->cmd_complete, bus->adap.timeout);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			goto reset_out;
+		else if (bus->cmd_err)
+			goto reset_out;
+		/* Recovery failed. */
+		else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+			   ASPEED_I2CD_SCL_LINE_STS))
+			ret = -EIO;
+	/* Bus error. */
+	} else {
+		dev_dbg(bus->dev, "bus hung (state %x), attempting recovery\n",
+			command);
+
+		reinit_completion(&bus->cmd_complete);
+		writel(ASPEED_I2CD_BUS_RECOVER_CMD,
+		       bus->base + ASPEED_I2C_CMD_REG);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_timeout(
+				&bus->cmd_complete, bus->adap.timeout);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			goto reset_out;
+		else if (bus->cmd_err)
+			goto reset_out;
+		/* Recovery failed. */
+		else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+			   ASPEED_I2CD_SDA_LINE_STS))
+			ret = -EIO;
+	}
+
+out:
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return ret;
+
+reset_out:
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return aspeed_i2c_reset(bus);
+}
+
+static void __aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
+{
+	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
+	struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
+	u8 slave_addr = msg->addr << 1;
+
+	bus->master_state = ASPEED_I2C_MASTER_START;
+	bus->buf_index = 0;
+
+	if (msg->flags & I2C_M_RD) {
+		slave_addr |= 1;
+		command |= ASPEED_I2CD_M_RX_CMD;
+		/* Need to let the hardware know to NACK after RX. */
+		if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
+			command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+	}
+
+	writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+	writel(command, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+static void __aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus)
+{
+	bus->master_state = ASPEED_I2C_MASTER_STOP;
+	writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+static void __aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus)
+{
+	if (bus->msgs_index + 1 < bus->msgs_count) {
+		bus->msgs_index++;
+		__aspeed_i2c_do_start(bus);
+	} else {
+		__aspeed_i2c_do_stop(bus);
+	}
+}
+
+static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
+{
+	u32 irq_status, status_ack = 0, command = 0;
+	struct i2c_msg *msg;
+	u8 recv_byte;
+
+	spin_lock(&bus->lock);
+	irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+
+	if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
+		goto out_complete;
+	}
+
+	/*
+	 * Either we encountered an interrupt that reports an error, or we are
+	 * in an invalid state.
+	 */
+	if (irq_status & ASPEED_I2CD_INTR_ERROR ||
+	    (!bus->msgs && bus->master_state != ASPEED_I2C_MASTER_STOP)) {
+		dev_dbg(bus->dev, "received error interrupt: 0x%08x",
+			irq_status);
+		bus->cmd_err = -EIO;
+		__aspeed_i2c_do_stop(bus);
+		goto out_no_complete;
+	}
+	msg = &bus->msgs[bus->msgs_index];
+
+	/*
+	 * START is a special case because we still have to handle a subsequent
+	 * TX or RX immediately after we handle it, so we handle it here and
+	 * then update the state and handle the new state below.
+	 */
+	if (bus->master_state == ASPEED_I2C_MASTER_START) {
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			dev_dbg(bus->dev,
+				"no slave present at %02x", msg->addr);
+			status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+			goto error_and_stop;
+		}
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		if (msg->flags & I2C_M_RD)
+			bus->master_state = ASPEED_I2C_MASTER_RX_FIRST;
+		else
+			bus->master_state = ASPEED_I2C_MASTER_TX_FIRST;
+	}
+
+	switch (bus->master_state) {
+	case ASPEED_I2C_MASTER_TX:
+		if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
+			dev_dbg(bus->dev, "slave NACKed TX");
+			status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+			goto error_and_stop;
+		} else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			dev_err(bus->dev, "slave failed to ACK TX");
+			goto error_and_stop;
+		}
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		/* fallthrough intended */
+	case ASPEED_I2C_MASTER_TX_FIRST:
+		if (bus->buf_index < msg->len) {
+			bus->master_state = ASPEED_I2C_MASTER_TX;
+			writel(msg->buf[bus->buf_index++],
+			       bus->base + ASPEED_I2C_BYTE_BUF_REG);
+			writel(ASPEED_I2CD_M_TX_CMD,
+			       bus->base + ASPEED_I2C_CMD_REG);
+		} else {
+			__aspeed_i2c_next_msg_or_stop(bus);
+		}
+		goto out_no_complete;
+	case ASPEED_I2C_MASTER_RX_FIRST:
+		/* RX may not have completed yet (only address cycle) */
+		if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
+			goto out_no_complete;
+		/* fallthrough intended */
+	case ASPEED_I2C_MASTER_RX:
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
+			dev_err(bus->dev, "master failed to RX");
+			goto error_and_stop;
+		}
+		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+
+		recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		msg->buf[bus->buf_index++] = recv_byte;
+
+		if (msg->flags & I2C_M_RECV_LEN) {
+			if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
+				bus->cmd_err = -EPROTO;
+				__aspeed_i2c_do_stop(bus);
+				goto out_no_complete;
+			}
+			msg->len = recv_byte +
+					((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
+			msg->flags &= ~I2C_M_RECV_LEN;
+		}
+
+		if (bus->buf_index < msg->len) {
+			bus->master_state = ASPEED_I2C_MASTER_RX;
+			command = ASPEED_I2CD_M_RX_CMD;
+			if (bus->buf_index + 1 == msg->len)
+				command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+			writel(command, bus->base + ASPEED_I2C_CMD_REG);
+		} else {
+			__aspeed_i2c_next_msg_or_stop(bus);
+		}
+		goto out_no_complete;
+	case ASPEED_I2C_MASTER_STOP:
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
+			dev_err(bus->dev, "master failed to STOP");
+			bus->cmd_err = -EIO;
+			/* Do not STOP as we have already tried. */
+		} else {
+			status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		}
+
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		goto out_complete;
+	case ASPEED_I2C_MASTER_INACTIVE:
+		dev_err(bus->dev,
+			"master received interrupt 0x%08x, but is inactive",
+			irq_status);
+		bus->cmd_err = -EIO;
+		/* Do not STOP as we should be inactive. */
+		goto out_complete;
+	default:
+		WARN(1, "unknown master state\n");
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		bus->cmd_err = -EIO;
+		goto out_complete;
+	}
+error_and_stop:
+	bus->cmd_err = -EIO;
+	__aspeed_i2c_do_stop(bus);
+	goto out_no_complete;
+out_complete:
+	complete(&bus->cmd_complete);
+out_no_complete:
+	if (irq_status != status_ack)
+		dev_err(bus->dev,
+			"irq handled != irq. expected 0x%08x, but was 0x%08x\n",
+			irq_status, status_ack);
+	writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
+	spin_unlock(&bus->lock);
+	return !!irq_status;
+}
+
+static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
+{
+	struct aspeed_i2c_bus *bus = dev_id;
+
+	if (aspeed_i2c_master_irq(bus))
+		return IRQ_HANDLED;
+	else
+		return IRQ_NONE;
+}
+
+static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs, int num)
+{
+	struct aspeed_i2c_bus *bus = adap->algo_data;
+	unsigned long time_left, flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	bus->cmd_err = 0;
+
+	/* If bus is busy, attempt recovery. We assume a single master
+	 * environment.
+	 */
+	if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		ret = aspeed_i2c_recover_bus(bus);
+		if (ret)
+			return ret;
+		spin_lock_irqsave(&bus->lock, flags);
+	}
+
+	bus->msgs = msgs;
+	bus->msgs_index = 0;
+	bus->msgs_count = num;
+
+	reinit_completion(&bus->cmd_complete);
+	__aspeed_i2c_do_start(bus);
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	time_left = wait_for_completion_timeout(&bus->cmd_complete,
+						bus->adap.timeout);
+
+	spin_lock_irqsave(&bus->lock, flags);
+	bus->msgs = NULL;
+	if (time_left == 0)
+		ret = -ETIMEDOUT;
+	else
+		ret = bus->cmd_err;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	/* If nothing went wrong, return number of messages transferred. */
+	if (ret >= 0)
+		return bus->msgs_index + 1;
+	else
+		return ret;
+}
+
+static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm aspeed_i2c_algo = {
+	.master_xfer	= aspeed_i2c_master_xfer,
+	.functionality	= aspeed_i2c_functionality,
+};
+
+static u32 aspeed_i2c_get_clk_reg_val(u32 divisor)
+{
+	u32 base_clk, clk_high, clk_low, tmp;
+
+	/*
+	 * The actual clock frequency of SCL is:
+	 *	SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
+	 *		 = APB_freq / divisor
+	 * where base_freq is a programmable clock divider; its value is
+	 *	base_freq = 1 << base_clk
+	 * SCL_high is the number of base_freq clock cycles that SCL stays high
+	 * and SCL_low is the number of base_freq clock cycles that SCL stays
+	 * low for a period of SCL.
+	 * The actual register has a minimum SCL_high and SCL_low minimum of 1;
+	 * thus, they start counting at zero. So
+	 *	SCL_high = clk_high + 1
+	 *	SCL_low	 = clk_low + 1
+	 * Thus,
+	 *	SCL_freq = APB_freq /
+	 *		((1 << base_clk) * (clk_high + 1 + clk_low + 1))
+	 * The documentation recommends clk_high >= 8 and clk_low >= 7 when
+	 * possible; this last constraint gives us the following solution:
+	 */
+	base_clk = divisor > 33 ? ilog2((divisor - 1) / 32) + 1 : 0;
+	tmp = divisor / (1 << base_clk);
+	clk_high = tmp / 2 + tmp % 2;
+	clk_low = tmp - clk_high;
+
+	clk_high -= 1;
+	clk_low -= 1;
+
+	return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
+		& ASPEED_I2CD_TIME_SCL_HIGH_MASK)
+			| ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
+			   & ASPEED_I2CD_TIME_SCL_LOW_MASK)
+			| (base_clk & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
+}
+
+static int __aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
+				 struct platform_device *pdev)
+{
+	u32 clk_freq, divisor, clk_reg_val;
+	struct clk *pclk;
+	int ret;
+
+	pclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pclk)) {
+		dev_err(&pdev->dev, "clk_get failed\n");
+		return PTR_ERR(pclk);
+	}
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "bus-frequency", &clk_freq);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Could not read bus-frequency property\n");
+		clk_freq = 100000;
+	}
+	divisor = clk_get_rate(pclk) / clk_freq;
+	/* We just need the clock rate, we don't actually use the clk object. */
+	devm_clk_put(&pdev->dev, pclk);
+
+	clk_reg_val = aspeed_i2c_get_clk_reg_val(divisor);
+	writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
+
+	/*
+	 * If the base divisor is non-zero then we do not want to enable high
+	 * speed mode, otherwise we might as well enable it.
+	 * For reference, setting high speed mode will make the base divisor
+	 * zero and corresponds to a minimum SCL frequency of about 1.5MHz.
+	 */
+	if (clk_reg_val & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) {
+		writel(ASPEED_NO_TIMEOUT_CTRL,
+		       bus->base + ASPEED_I2C_AC_TIMING_REG2);
+	} else {
+		writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) |
+		       ASPEED_I2CD_M_HIGH_SPEED_EN |
+		       ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
+		       ASPEED_I2CD_SDA_DRIVE_1T_EN,
+		       bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+		writel(0x3, bus->base + ASPEED_I2C_AC_TIMING_REG2);
+	}
+
+	return 0;
+}
+
+static int __aspeed_i2c_init(struct aspeed_i2c_bus *bus,
+			     struct platform_device *pdev)
+{
+	int ret;
+
+	/* Disable everything. */
+	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	ret = __aspeed_i2c_init_clk(bus, pdev);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Master Mode */
+	writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) |
+	       ASPEED_I2CD_MASTER_EN |
+	       /* TODO: provide device tree option for multi-master mode. */
+	       ASPEED_I2CD_MULTI_MASTER_DIS,
+	       bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	/* Set interrupt generation of I2C controller */
+	writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	return 0;
+}
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
+{
+	struct platform_device *pdev = to_platform_device(bus->dev);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&bus->lock, flags);
+
+	/* Disable and quiesce interrupts. */
+	reinit_completion(&bus->cmd_complete);
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	spin_unlock_irqrestore(&bus->lock, flags);
+	/*
+	 * We need to make sure that there are no interrupts that fired just
+	 * before we grabbed the lock; if that did not happen, then we are going
+	 * to timeout and that is okay.
+	 */
+	wait_for_completion_timeout(&bus->cmd_complete, bus->adap.timeout);
+	spin_lock_irqsave(&bus->lock, flags);
+
+	ret = __aspeed_i2c_init(bus, pdev);
+
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return ret;
+}
+
+static int aspeed_i2c_probe_bus(struct platform_device *pdev)
+{
+	struct aspeed_i2c_bus *bus;
+	struct resource *res;
+	int ret;
+
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bus->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(bus->base))
+		return PTR_ERR(bus->base);
+
+	/* Initialize the I2C adapter */
+	spin_lock_init(&bus->lock);
+	init_completion(&bus->cmd_complete);
+	bus->adap.owner = THIS_MODULE;
+	bus->adap.retries = 0;
+	bus->adap.timeout = 5 * HZ;
+	bus->adap.algo = &aspeed_i2c_algo;
+	bus->adap.algo_data = bus;
+	bus->adap.dev.parent = &pdev->dev;
+	bus->adap.dev.of_node = pdev->dev.of_node;
+	snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
+
+	bus->dev = &pdev->dev;
+
+	/*
+	 * No need to quiesce interrupts because there is no interrupt handler
+	 * installed.
+	 */
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+	ret = __aspeed_i2c_init(bus, pdev);
+	if (ret < 0)
+		return ret;
+
+	bus->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
+			       0, dev_name(&pdev->dev), bus);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_add_adapter(&bus->adap);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, bus);
+
+	dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
+		 bus->adap.nr, bus->irq);
+
+	return 0;
+}
+
+static int aspeed_i2c_remove_bus(struct platform_device *pdev)
+{
+	struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+
+	/* Disable everything. */
+	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	i2c_del_adapter(&bus->adap);
+
+	return 0;
+}
+
+static const struct of_device_id aspeed_i2c_bus_of_table[] = {
+	{ .compatible = "aspeed,ast2400-i2c-bus", },
+	{ .compatible = "aspeed,ast2500-i2c-bus", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
+
+static struct platform_driver aspeed_i2c_bus_driver = {
+	.probe		= aspeed_i2c_probe_bus,
+	.remove		= aspeed_i2c_remove_bus,
+	.driver		= {
+		.name		= "aspeed-i2c-bus",
+		.of_match_table	= aspeed_i2c_bus_of_table,
+	},
+};
+module_platform_driver(aspeed_i2c_bus_driver);
+
+MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
+MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.12.2.816.g2cccc81164-goog

Re: [PATCH v7 4/5] i2c: aspeed: added driver for Aspeed I2C

[Benjamin Herrenschmidt]

On Mon, 2017-04-24 at 11:18 -0700, Brendan Higgins wrote:
> +static int __aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> +                                struct platform_device *pdev)
> +{

Minor nit ... I'm really not fan of those underscores.

We use __ functions in some cases in the kernel for low level
helpers, usually when it's a low level variant of an existing
function or an "unlocked" variant, but I don't think generalizing
it to pretty much everything in the driver is worthwhile here.

If you want to be explicit about locking, I would suggest you
use a comment in front of the function explaining if it
expects to be called with the lock held.

We tend to only do that when *both* functions exist and one is
implemented in term of the other.

Cheers,
Ben.

Re: [PATCH v7 4/5] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

Adding Ryan to thread.

>> +static int __aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
>> +                                struct platform_device *pdev)
>> +{
>
> Minor nit ... I'm really not fan of those underscores.
>
> We use __ functions in some cases in the kernel for low level
> helpers, usually when it's a low level variant of an existing
> function or an "unlocked" variant, but I don't think generalizing
> it to pretty much everything in the driver is worthwhile here.
>
> If you want to be explicit about locking, I would suggest you
> use a comment in front of the function explaining if it
> expects to be called with the lock held.
>
> We tend to only do that when *both* functions exist and one is
> implemented in term of the other.

Okay, I guess that makes sense. Sorry, I thought the "unlocked"
variant might refer to a function that you have to pay close attention
to the context in which it is called; with as many functions as I have
that require the lock to be held, I would like there to be some way to
say the function is "unsafe," but I guess if there is no convention to
do that, then there is no convention to do that.

Re: [PATCH v7 4/5] i2c: aspeed: added driver for Aspeed I2C

[Brendan Higgins]

Sorry for the spam everyone, email client did not do what I expected it to do.

I would like to release another version this week or next week, and I
think that we are pretty closed to having something we can apply, but
before I do that, I want to get something resolved:

> +static int __aspeed_i2c_init(struct aspeed_i2c_bus *bus,
> +                            struct platform_device *pdev)
> +{
> +       int ret;
> +
> +       /* Disable everything. */
> +       writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
> +
> +       ret = __aspeed_i2c_init_clk(bus, pdev);
> +       if (ret < 0)
> +               return ret;
> +
> +       /* Enable Master Mode */
> +       writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) |
> +              ASPEED_I2CD_MASTER_EN |
> +              /* TODO: provide device tree option for multi-master mode. */

I am curious what everyone thinks about this. It seemed that, earlier
on, people did not like me disabling multi-master mode, but I think
that it would make bus recovery not work as well. Given that, I think
it makes the most sense to provide a device tree option either to
enable multi-master support or disable it. Thoughts?

> +              ASPEED_I2CD_MULTI_MASTER_DIS,
> +              bus->base + ASPEED_I2C_FUN_CTRL_REG);
> +
> +       /* Set interrupt generation of I2C controller */
> +       writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
> +
> +       return 0;
> +}

Re: [PATCH v7 4/5] i2c: aspeed: added driver for Aspeed I2C

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 575 bytes --]


> > +              /* TODO: provide device tree option for multi-master mode.
> > */
> 
> 
> I am curious what everyone thinks about this. It seemed that, earlier on,
> people did not like me disabling multi-master mode, but I think that it
> would make bus recovery not work as well. Given that, I think it makes the
> most sense to provide a device tree option either to enable multi-master
> support or disable it. Thoughts?

Check Documentation/devicetree/bindings/i2c/i2c.txt, there is a
"multi-master" property already which I think you could use here.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v7 4/5] i2c: aspeed: added driver for Aspeed I2C

[Benjamin Herrenschmidt]

On Mon, 2017-05-08 at 16:28 -0700, Brendan Higgins wrote:
> 
> I am curious what everyone thinks about this. It seemed that, earlier
> on, people did not like me disabling multi-master mode, but I think
> that it would make bus recovery not work as well. Given that, I think
> it makes the most sense to provide a device tree option either to
> enable multi-master support or disable it. Thoughts?

I think we probably want to keep it enabled yes. Another reason is that
SMBus notifications are in effect a type of multi-master (well slave
really), and we should really add support for them even when the slave
is not enabled.

We are hitting some PMbus devices that apparently can't be prevented
from sending those and that's causing issues.

Cheers,
Ben.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 4/5] i2c: aspeed: added driver for Aspeed I2C

[Cédric Le Goater]

Hello Brendan,

[ ... ]

> +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
> +{
> +	u32 irq_status, status_ack = 0, command = 0;
> +	struct i2c_msg *msg;
> +	u8 recv_byte;
> +
> +	spin_lock(&bus->lock);
> +	irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
> +
> +	if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
> +		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
> +		status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
> +		goto out_complete;
> +	}
> +
> +	/*
> +	 * Either we encountered an interrupt that reports an error, or we are
> +	 * in an invalid state.
> +	 */
> +	if (irq_status & ASPEED_I2CD_INTR_ERROR ||
> +	    (!bus->msgs && bus->master_state != ASPEED_I2C_MASTER_STOP)) {
> +		dev_dbg(bus->dev, "received error interrupt: 0x%08x",
> +			irq_status);
> +		bus->cmd_err = -EIO;
> +		__aspeed_i2c_do_stop(bus);

If I am correct, this will continuously send STOP commands if 
an interrupt error is reported. It might be worth checking for 
this potential issue.

Thanks,

C. 
 
> +		goto out_no_complete;
> +	}
> +	msg = &bus->msgs[bus->msgs_index];
> +
> +	/*
> +	 * START is a special case because we still have to handle a subsequent
> +	 * TX or RX immediately after we handle it, so we handle it here and
> +	 * then update the state and handle the new state below.
> +	 */
> +	if (bus->master_state == ASPEED_I2C_MASTER_START) {
> +		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
> +			dev_dbg(bus->dev,
> +				"no slave present at %02x", msg->addr);
> +			status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> +			goto error_and_stop;
> +		}
> +		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
> +		if (msg->flags & I2C_M_RD)
> +			bus->master_state = ASPEED_I2C_MASTER_RX_FIRST;
> +		else
> +			bus->master_state = ASPEED_I2C_MASTER_TX_FIRST;
> +	}
> +
> +	switch (bus->master_state) {
> +	case ASPEED_I2C_MASTER_TX:
> +		if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
> +			dev_dbg(bus->dev, "slave NACKed TX");
> +			status_ack |= ASPEED_I2CD_INTR_TX_NAK;
> +			goto error_and_stop;
> +		} else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
> +			dev_err(bus->dev, "slave failed to ACK TX");
> +			goto error_and_stop;
> +		}
> +		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
> +		/* fallthrough intended */
> +	case ASPEED_I2C_MASTER_TX_FIRST:
> +		if (bus->buf_index < msg->len) {
> +			bus->master_state = ASPEED_I2C_MASTER_TX;
> +			writel(msg->buf[bus->buf_index++],
> +			       bus->base + ASPEED_I2C_BYTE_BUF_REG);
> +			writel(ASPEED_I2CD_M_TX_CMD,
> +			       bus->base + ASPEED_I2C_CMD_REG);
> +		} else {
> +			__aspeed_i2c_next_msg_or_stop(bus);
> +		}
> +		goto out_no_complete;
> +	case ASPEED_I2C_MASTER_RX_FIRST:
> +		/* RX may not have completed yet (only address cycle) */
> +		if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
> +			goto out_no_complete;
> +		/* fallthrough intended */
> +	case ASPEED_I2C_MASTER_RX:
> +		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
> +			dev_err(bus->dev, "master failed to RX");
> +			goto error_and_stop;
> +		}
> +		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
> +
> +		recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
> +		msg->buf[bus->buf_index++] = recv_byte;
> +
> +		if (msg->flags & I2C_M_RECV_LEN) {
> +			if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
> +				bus->cmd_err = -EPROTO;
> +				__aspeed_i2c_do_stop(bus);
> +				goto out_no_complete;
> +			}
> +			msg->len = recv_byte +
> +					((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
> +			msg->flags &= ~I2C_M_RECV_LEN;
> +		}
> +
> +		if (bus->buf_index < msg->len) {
> +			bus->master_state = ASPEED_I2C_MASTER_RX;
> +			command = ASPEED_I2CD_M_RX_CMD;
> +			if (bus->buf_index + 1 == msg->len)
> +				command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
> +			writel(command, bus->base + ASPEED_I2C_CMD_REG);
> +		} else {
> +			__aspeed_i2c_next_msg_or_stop(bus);
> +		}
> +		goto out_no_complete;
> +	case ASPEED_I2C_MASTER_STOP:
> +		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
> +			dev_err(bus->dev, "master failed to STOP");
> +			bus->cmd_err = -EIO;
> +			/* Do not STOP as we have already tried. */
> +		} else {
> +			status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
> +		}
> +
> +		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
> +		goto out_complete;
> +	case ASPEED_I2C_MASTER_INACTIVE:
> +		dev_err(bus->dev,
> +			"master received interrupt 0x%08x, but is inactive",
> +			irq_status);
> +		bus->cmd_err = -EIO;
> +		/* Do not STOP as we should be inactive. */
> +		goto out_complete;
> +	default:
> +		WARN(1, "unknown master state\n");
> +		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
> +		bus->cmd_err = -EIO;
> +		goto out_complete;
> +	}
> +error_and_stop:
> +	bus->cmd_err = -EIO;
> +	__aspeed_i2c_do_stop(bus);
> +	goto out_no_complete;
> +out_complete:
> +	complete(&bus->cmd_complete);
> +out_no_complete:
> +	if (irq_status != status_ack)
> +		dev_err(bus->dev,
> +			"irq handled != irq. expected 0x%08x, but was 0x%08x\n",
> +			irq_status, status_ack);
> +	writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
> +	spin_unlock(&bus->lock);
> +	return !!irq_status;
> +}
> +
> +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
> +{
> +	struct aspeed_i2c_bus *bus = dev_id;
> +
> +	if (aspeed_i2c_master_irq(bus))
> +		return IRQ_HANDLED;
> +	else
> +		return IRQ_NONE;
> +}
> +
> +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
> +				  struct i2c_msg *msgs, int num)
> +{
> +	struct aspeed_i2c_bus *bus = adap->algo_data;
> +	unsigned long time_left, flags;
> +	int ret = 0;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	bus->cmd_err = 0;
> +
> +	/* If bus is busy, attempt recovery. We assume a single master
> +	 * environment.
> +	 */
> +	if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) {
> +		spin_unlock_irqrestore(&bus->lock, flags);
> +		ret = aspeed_i2c_recover_bus(bus);
> +		if (ret)
> +			return ret;
> +		spin_lock_irqsave(&bus->lock, flags);
> +	}
> +
> +	bus->msgs = msgs;
> +	bus->msgs_index = 0;
> +	bus->msgs_count = num;
> +
> +	reinit_completion(&bus->cmd_complete);
> +	__aspeed_i2c_do_start(bus);
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	time_left = wait_for_completion_timeout(&bus->cmd_complete,
> +						bus->adap.timeout);
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +	bus->msgs = NULL;
> +	if (time_left == 0)
> +		ret = -ETIMEDOUT;
> +	else
> +		ret = bus->cmd_err;
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	/* If nothing went wrong, return number of messages transferred. */
> +	if (ret >= 0)
> +		return bus->msgs_index + 1;
> +	else
> +		return ret;
> +}
> +
> +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
> +{
> +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
> +}
> +
> +static const struct i2c_algorithm aspeed_i2c_algo = {
> +	.master_xfer	= aspeed_i2c_master_xfer,
> +	.functionality	= aspeed_i2c_functionality,
> +};
> +
> +static u32 aspeed_i2c_get_clk_reg_val(u32 divisor)
> +{
> +	u32 base_clk, clk_high, clk_low, tmp;
> +
> +	/*
> +	 * The actual clock frequency of SCL is:
> +	 *	SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
> +	 *		 = APB_freq / divisor
> +	 * where base_freq is a programmable clock divider; its value is
> +	 *	base_freq = 1 << base_clk
> +	 * SCL_high is the number of base_freq clock cycles that SCL stays high
> +	 * and SCL_low is the number of base_freq clock cycles that SCL stays
> +	 * low for a period of SCL.
> +	 * The actual register has a minimum SCL_high and SCL_low minimum of 1;
> +	 * thus, they start counting at zero. So
> +	 *	SCL_high = clk_high + 1
> +	 *	SCL_low	 = clk_low + 1
> +	 * Thus,
> +	 *	SCL_freq = APB_freq /
> +	 *		((1 << base_clk) * (clk_high + 1 + clk_low + 1))
> +	 * The documentation recommends clk_high >= 8 and clk_low >= 7 when
> +	 * possible; this last constraint gives us the following solution:
> +	 */
> +	base_clk = divisor > 33 ? ilog2((divisor - 1) / 32) + 1 : 0;
> +	tmp = divisor / (1 << base_clk);
> +	clk_high = tmp / 2 + tmp % 2;
> +	clk_low = tmp - clk_high;
> +
> +	clk_high -= 1;
> +	clk_low -= 1;
> +
> +	return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
> +		& ASPEED_I2CD_TIME_SCL_HIGH_MASK)
> +			| ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
> +			   & ASPEED_I2CD_TIME_SCL_LOW_MASK)
> +			| (base_clk & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
> +}
> +
> +static int __aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus,
> +				 struct platform_device *pdev)
> +{
> +	u32 clk_freq, divisor, clk_reg_val;
> +	struct clk *pclk;
> +	int ret;
> +
> +	pclk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(pclk)) {
> +		dev_err(&pdev->dev, "clk_get failed\n");
> +		return PTR_ERR(pclk);
> +	}
> +	ret = of_property_read_u32(pdev->dev.of_node,
> +				   "bus-frequency", &clk_freq);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +			"Could not read bus-frequency property\n");
> +		clk_freq = 100000;
> +	}
> +	divisor = clk_get_rate(pclk) / clk_freq;
> +	/* We just need the clock rate, we don't actually use the clk object. */
> +	devm_clk_put(&pdev->dev, pclk);
> +
> +	clk_reg_val = aspeed_i2c_get_clk_reg_val(divisor);
> +	writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
> +
> +	/*
> +	 * If the base divisor is non-zero then we do not want to enable high
> +	 * speed mode, otherwise we might as well enable it.
> +	 * For reference, setting high speed mode will make the base divisor
> +	 * zero and corresponds to a minimum SCL frequency of about 1.5MHz.
> +	 */
> +	if (clk_reg_val & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) {
> +		writel(ASPEED_NO_TIMEOUT_CTRL,
> +		       bus->base + ASPEED_I2C_AC_TIMING_REG2);
> +	} else {
> +		writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) |
> +		       ASPEED_I2CD_M_HIGH_SPEED_EN |
> +		       ASPEED_I2CD_M_SDA_DRIVE_1T_EN |
> +		       ASPEED_I2CD_SDA_DRIVE_1T_EN,
> +		       bus->base + ASPEED_I2C_FUN_CTRL_REG);
> +
> +		writel(0x3, bus->base + ASPEED_I2C_AC_TIMING_REG2);
> +	}
> +
> +	return 0;
> +}
> +
> +static int __aspeed_i2c_init(struct aspeed_i2c_bus *bus,
> +			     struct platform_device *pdev)
> +{
> +	int ret;
> +
> +	/* Disable everything. */
> +	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
> +
> +	ret = __aspeed_i2c_init_clk(bus, pdev);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Enable Master Mode */
> +	writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) |
> +	       ASPEED_I2CD_MASTER_EN |
> +	       /* TODO: provide device tree option for multi-master mode. */
> +	       ASPEED_I2CD_MULTI_MASTER_DIS,
> +	       bus->base + ASPEED_I2C_FUN_CTRL_REG);
> +
> +	/* Set interrupt generation of I2C controller */
> +	writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
> +
> +	return 0;
> +}
> +
> +static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
> +{
> +	struct platform_device *pdev = to_platform_device(bus->dev);
> +	unsigned long flags;
> +	int ret;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +
> +	/* Disable and quiesce interrupts. */
> +	reinit_completion(&bus->cmd_complete);
> +	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
> +
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +	/*
> +	 * We need to make sure that there are no interrupts that fired just
> +	 * before we grabbed the lock; if that did not happen, then we are going
> +	 * to timeout and that is okay.
> +	 */
> +	wait_for_completion_timeout(&bus->cmd_complete, bus->adap.timeout);
> +	spin_lock_irqsave(&bus->lock, flags);
> +
> +	ret = __aspeed_i2c_init(bus, pdev);
> +
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	return ret;
> +}
> +
> +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_bus *bus;
> +	struct resource *res;
> +	int ret;
> +
> +	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> +	if (!bus)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	bus->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(bus->base))
> +		return PTR_ERR(bus->base);
> +
> +	/* Initialize the I2C adapter */
> +	spin_lock_init(&bus->lock);
> +	init_completion(&bus->cmd_complete);
> +	bus->adap.owner = THIS_MODULE;
> +	bus->adap.retries = 0;
> +	bus->adap.timeout = 5 * HZ;
> +	bus->adap.algo = &aspeed_i2c_algo;
> +	bus->adap.algo_data = bus;
> +	bus->adap.dev.parent = &pdev->dev;
> +	bus->adap.dev.of_node = pdev->dev.of_node;
> +	snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");
> +
> +	bus->dev = &pdev->dev;
> +
> +	/*
> +	 * No need to quiesce interrupts because there is no interrupt handler
> +	 * installed.
> +	 */
> +	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
> +	ret = __aspeed_i2c_init(bus, pdev);
> +	if (ret < 0)
> +		return ret;
> +
> +	bus->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
> +	ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
> +			       0, dev_name(&pdev->dev), bus);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_add_adapter(&bus->adap);
> +	if (ret < 0)
> +		return ret;
> +
> +	platform_set_drvdata(pdev, bus);
> +
> +	dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
> +		 bus->adap.nr, bus->irq);
> +
> +	return 0;
> +}
> +
> +static int aspeed_i2c_remove_bus(struct platform_device *pdev)
> +{
> +	struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&bus->lock, flags);
> +
> +	/* Disable everything. */
> +	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
> +	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
> +
> +	spin_unlock_irqrestore(&bus->lock, flags);
> +
> +	i2c_del_adapter(&bus->adap);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id aspeed_i2c_bus_of_table[] = {
> +	{ .compatible = "aspeed,ast2400-i2c-bus", },
> +	{ .compatible = "aspeed,ast2500-i2c-bus", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
> +
> +static struct platform_driver aspeed_i2c_bus_driver = {
> +	.probe		= aspeed_i2c_probe_bus,
> +	.remove		= aspeed_i2c_remove_bus,
> +	.driver		= {
> +		.name		= "aspeed-i2c-bus",
> +		.of_match_table	= aspeed_i2c_bus_of_table,
> +	},
> +};
> +module_platform_driver(aspeed_i2c_bus_driver);
> +
> +MODULE_AUTHOR("Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>");
> +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
> +MODULE_LICENSE("GPL v2");
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7 1/5] irqchip/aspeed-i2c-ic: binding docs for Aspeed I2C Interrupt Controller

[Brendan Higgins]

Added device tree binding documentation for Aspeed I2C Interrupt
Controller.

Signed-off-by: Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
---
Added in v6:
  - Pulled "aspeed_i2c_controller" out into a interrupt controller since that is
    what it actually does.
Changes for v7:
  - None
---
 .../interrupt-controller/aspeed,ast2400-i2c-ic.txt | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
new file mode 100644
index 000000000000..033cc82e5684
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
@@ -0,0 +1,25 @@
+Device tree configuration for the I2C Interrupt Controller on the AST24XX and
+AST25XX SoCs.
+
+Required Properties:
+- #address-cells	: should be 1
+- #size-cells 		: should be 1
+- #interrupt-cells 	: should be 1
+- compatible 		: should be "aspeed,ast2400-i2c-ic"
+			  or "aspeed,ast2500-i2c-ic"
+- reg			: address start and range of controller
+- interrupts		: interrupt number
+- interrupt-controller	: denotes that the controller receives and fires
+			  new interrupts for child busses
+
+Example:
+
+i2c_ic: interrupt-controller@0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#interrupt-cells = <1>;
+	compatible = "aspeed,ast2400-i2c-ic";
+	reg = <0x0 0x40>;
+	interrupts = <12>;
+	interrupt-controller;
+};
-- 
2.12.2.816.g2cccc81164-goog

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 1/5] irqchip/aspeed-i2c-ic: binding docs for Aspeed I2C Interrupt Controller

[Rob Herring]

On Mon, Apr 24, 2017 at 11:18:14AM -0700, Brendan Higgins wrote:
> Added device tree binding documentation for Aspeed I2C Interrupt
> Controller.
> 
> Signed-off-by: Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
> ---
> Added in v6:
>   - Pulled "aspeed_i2c_controller" out into a interrupt controller since that is
>     what it actually does.
> Changes for v7:
>   - None
> ---
>  .../interrupt-controller/aspeed,ast2400-i2c-ic.txt | 25 ++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7 2/5] irqchip/aspeed-i2c-ic: Add I2C IRQ controller for Aspeed

[Brendan Higgins]

The Aspeed 24XX/25XX chips share a single hardware interrupt across 14
separate I2C busses. This adds a dummy irqchip which maps the single
hardware interrupt to software interrupts for each of the busses.

Signed-off-by: Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
---
Added in v6:
  - Pulled "aspeed_i2c_controller" out into a interrupt controller since that is
    what it actually does.
Changes for v7:
  - Renamed irq domain for consistency
---
 drivers/irqchip/Makefile            |   2 +-
 drivers/irqchip/irq-aspeed-i2c-ic.c | 102 ++++++++++++++++++++++++++++++++++++
 2 files changed, 103 insertions(+), 1 deletion(-)
 create mode 100644 drivers/irqchip/irq-aspeed-i2c-ic.c

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 152bc40b6762..c136c2bd1761 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -74,6 +74,6 @@ obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
 obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
 obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
-obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o
+obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
diff --git a/drivers/irqchip/irq-aspeed-i2c-ic.c b/drivers/irqchip/irq-aspeed-i2c-ic.c
new file mode 100644
index 000000000000..a36fb09c10c2
--- /dev/null
+++ b/drivers/irqchip/irq-aspeed-i2c-ic.c
@@ -0,0 +1,102 @@
+/*
+ *  Aspeed 24XX/25XX I2C Interrupt Controller.
+ *
+ *  Copyright (C) 2012-2017 ASPEED Technology Inc.
+ *  Copyright 2017 IBM Corporation
+ *  Copyright 2017 Google, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+
+#define ASPEED_I2C_IC_NUM_BUS 14
+
+struct aspeed_i2c_ic {
+	void __iomem		*base;
+	int			parent_irq;
+	struct irq_domain	*irq_domain;
+};
+
+/*
+ * The aspeed chip provides a single hardware interrupt for all of the I2C
+ * busses, so we use a dummy interrupt chip to translate this single interrupt
+ * into multiple interrupts, each associated with a single I2C bus.
+ */
+static void aspeed_i2c_ic_irq_handler(struct irq_desc *desc)
+{
+	struct aspeed_i2c_ic *i2c_ic = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned long bit, status;
+	unsigned int bus_irq;
+
+	chained_irq_enter(chip, desc);
+	status = readl(i2c_ic->base);
+	for_each_set_bit(bit, &status, ASPEED_I2C_IC_NUM_BUS) {
+		bus_irq = irq_find_mapping(i2c_ic->irq_domain, bit);
+		generic_handle_irq(bus_irq);
+	}
+	chained_irq_exit(chip, desc);
+}
+
+/*
+ * Set simple handler and mark IRQ as valid. Nothing interesting to do here
+ * since we are using a dummy interrupt chip.
+ */
+static int aspeed_i2c_ic_map_irq_domain(struct irq_domain *domain,
+					unsigned int irq, irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops aspeed_i2c_ic_irq_domain_ops = {
+	.map = aspeed_i2c_ic_map_irq_domain,
+};
+
+static int __init aspeed_i2c_ic_of_init(struct device_node *node,
+					struct device_node *parent)
+{
+	struct aspeed_i2c_ic *i2c_ic;
+
+	i2c_ic = kzalloc(sizeof(*i2c_ic), GFP_KERNEL);
+	if (!i2c_ic)
+		return -ENOMEM;
+
+	i2c_ic->base = of_iomap(node, 0);
+	if (IS_ERR(i2c_ic->base))
+		return PTR_ERR(i2c_ic->base);
+
+	i2c_ic->parent_irq = irq_of_parse_and_map(node, 0);
+	if (i2c_ic->parent_irq < 0)
+		return i2c_ic->parent_irq;
+
+	i2c_ic->irq_domain = irq_domain_add_linear(
+			node, ASPEED_I2C_IC_NUM_BUS,
+			&aspeed_i2c_ic_irq_domain_ops, NULL);
+	if (!i2c_ic->irq_domain)
+		return -ENOMEM;
+
+	i2c_ic->irq_domain->name = "aspeed-i2c-domain";
+
+	irq_set_chained_handler_and_data(i2c_ic->parent_irq,
+					 aspeed_i2c_ic_irq_handler, i2c_ic);
+
+	pr_info("i2c controller registered, irq %d\n", i2c_ic->parent_irq);
+
+	return 0;
+}
+
+IRQCHIP_DECLARE(ast2400_i2c_ic, "aspeed,ast2400-i2c-ic", aspeed_i2c_ic_of_init);
+IRQCHIP_DECLARE(ast2500_i2c_ic, "aspeed,ast2500-i2c-ic", aspeed_i2c_ic_of_init);
-- 
2.12.2.816.g2cccc81164-goog

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7 5/5] i2c: aspeed: added slave support for Aspeed I2C driver

[Brendan Higgins]

Added slave support for Aspeed I2C controller. Supports fourteen busses
present in AST24XX and AST25XX BMC SoCs by Aspeed.

Signed-off-by: Brendan Higgins <brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
---
Added in v6:
  - Pulled slave support out of initial driver commit into its own commit.
  - No longer arbitrarily restrict bus to be slave xor master.
Changes for v7:
  - Added hardware reset function
  - Marked functions that need to be called with the lock held as "unlocked"
  - Did some cleanup
---
 drivers/i2c/busses/i2c-aspeed.c | 201 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 201 insertions(+)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 778bcaa4ccf4..7bd2328eb0fb 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -49,6 +49,7 @@
 #define ASPEED_I2CD_SDA_DRIVE_1T_EN			BIT(8)
 #define ASPEED_I2CD_M_SDA_DRIVE_1T_EN			BIT(7)
 #define ASPEED_I2CD_M_HIGH_SPEED_EN			BIT(6)
+#define ASPEED_I2CD_SLAVE_EN				BIT(1)
 #define ASPEED_I2CD_MASTER_EN				BIT(0)
 
 /* 0x04 : I2CD Clock and AC Timing Control Register #1 */
@@ -69,6 +70,7 @@
  */
 #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
 #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
+#define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
 #define ASPEED_I2CD_INTR_SCL_TIMEOUT			BIT(6)
 #define ASPEED_I2CD_INTR_ABNORMAL			BIT(5)
 #define ASPEED_I2CD_INTR_NORMAL_STOP			BIT(4)
@@ -106,6 +108,9 @@
 #define ASPEED_I2CD_M_TX_CMD				BIT(1)
 #define ASPEED_I2CD_M_START_CMD				BIT(0)
 
+/* 0x18 : I2CD Slave Device Address Register   */
+#define ASPEED_I2CD_DEV_ADDR_MASK			GENMASK(6, 0)
+
 enum aspeed_i2c_master_state {
 	ASPEED_I2C_MASTER_START,
 	ASPEED_I2C_MASTER_TX_FIRST,
@@ -116,6 +121,15 @@ enum aspeed_i2c_master_state {
 	ASPEED_I2C_MASTER_INACTIVE,
 };
 
+enum aspeed_i2c_slave_state {
+	ASPEED_I2C_SLAVE_START,
+	ASPEED_I2C_SLAVE_READ_REQUESTED,
+	ASPEED_I2C_SLAVE_READ_PROCESSED,
+	ASPEED_I2C_SLAVE_WRITE_REQUESTED,
+	ASPEED_I2C_SLAVE_WRITE_RECEIVED,
+	ASPEED_I2C_SLAVE_STOP,
+};
+
 struct aspeed_i2c_bus {
 	struct i2c_adapter		adap;
 	struct device			*dev;
@@ -132,6 +146,10 @@ struct aspeed_i2c_bus {
 	size_t				msgs_count;
 	bool				send_stop;
 	int				cmd_err;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	struct i2c_client		*slave;
+	enum aspeed_i2c_slave_state	slave_state;
+#endif /* CONFIG_I2C_SLAVE */
 };
 
 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
@@ -203,6 +221,110 @@ static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
 	return aspeed_i2c_reset(bus);
 }
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
+{
+	u32 command, irq_status, status_ack = 0;
+	struct i2c_client *slave = bus->slave;
+	bool irq_handled = true;
+	u8 value;
+
+	spin_lock(&bus->lock);
+	if (!slave) {
+		irq_handled = false;
+		goto out;
+	}
+
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+	irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+
+	/* Slave was requested, restart state machine. */
+	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
+		status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
+		bus->slave_state = ASPEED_I2C_SLAVE_START;
+	}
+
+	/* Slave is not currently active, irq was for someone else. */
+	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+		irq_handled = false;
+		goto out;
+	}
+
+	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
+		irq_status, command);
+
+	/* Slave was sent something. */
+	if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
+		value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		/* Handle address frame. */
+		if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
+			if (value & 0x1)
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_READ_REQUESTED;
+			else
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_WRITE_REQUESTED;
+		}
+		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+	}
+
+	/* Slave was asked to stop. */
+	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
+		status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+	if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
+		status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	switch (bus->slave_state) {
+	case ASPEED_I2C_SLAVE_READ_REQUESTED:
+		if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
+			dev_err(bus->dev, "Unexpected ACK on read request.\n");
+		bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
+
+		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+		writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+		writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		break;
+	case ASPEED_I2C_SLAVE_READ_PROCESSED:
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
+			dev_err(bus->dev,
+				"Expected ACK after processed read.\n");
+		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
+		writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+		writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		break;
+	case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
+		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		break;
+	case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
+		break;
+	case ASPEED_I2C_SLAVE_STOP:
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+		break;
+	default:
+		dev_err(bus->dev, "unhandled slave_state: %d\n",
+			bus->slave_state);
+		break;
+	}
+
+	if (status_ack != irq_status)
+		dev_err(bus->dev,
+			"irq handled != irq. expected %x, but was %x\n",
+			irq_status, status_ack);
+	writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+out:
+	spin_unlock(&bus->lock);
+	return irq_handled;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
 static void __aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
 {
 	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
@@ -391,6 +513,13 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 {
 	struct aspeed_i2c_bus *bus = dev_id;
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (aspeed_i2c_slave_irq(bus)) {
+		dev_dbg(bus->dev, "irq handled by slave.\n");
+		return IRQ_HANDLED;
+	}
+#endif /* CONFIG_I2C_SLAVE */
+
 	if (aspeed_i2c_master_irq(bus))
 		return IRQ_HANDLED;
 	else
@@ -449,9 +578,75 @@ static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
 }
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr)
+{
+	u32 addr_reg_val, func_ctrl_reg_val;
+
+	/* Set slave addr. */
+	addr_reg_val = readl(bus->base + ASPEED_I2C_DEV_ADDR_REG);
+	addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
+	addr_reg_val |= slave_addr & ASPEED_I2CD_DEV_ADDR_MASK;
+	writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG);
+
+	/* Turn on slave mode. */
+	func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
+	writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+}
+
+static int aspeed_i2c_reg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus;
+	unsigned long flags;
+
+	bus = client->adapter->algo_data;
+	spin_lock_irqsave(&bus->lock, flags);
+	if (bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	__aspeed_i2c_reg_slave(bus, client->addr);
+
+	bus->slave = client;
+	bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return 0;
+}
+
+static int aspeed_i2c_unreg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus = client->adapter->algo_data;
+	u32 func_ctrl_reg_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	if (!bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Turn off slave mode. */
+	func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
+	writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	bus->slave = NULL;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return 0;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
 static const struct i2c_algorithm aspeed_i2c_algo = {
 	.master_xfer	= aspeed_i2c_master_xfer,
 	.functionality	= aspeed_i2c_functionality,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	.reg_slave	= aspeed_i2c_reg_slave,
+	.unreg_slave	= aspeed_i2c_unreg_slave,
+#endif /* CONFIG_I2C_SLAVE */
 };
 
 static u32 aspeed_i2c_get_clk_reg_val(u32 divisor)
@@ -559,6 +754,12 @@ static int __aspeed_i2c_init(struct aspeed_i2c_bus *bus,
 	       ASPEED_I2CD_MULTI_MASTER_DIS,
 	       bus->base + ASPEED_I2C_FUN_CTRL_REG);
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* If slave has already been registered, re-enable it. */
+	if (bus->slave)
+		__aspeed_i2c_reg_slave(bus, bus->slave->addr);
+#endif /* CONFIG_I2C_SLAVE */
+
 	/* Set interrupt generation of I2C controller */
 	writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
 
-- 
2.12.2.816.g2cccc81164-goog

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 5/5] i2c: aspeed: added slave support for Aspeed I2C driver

[Brendan Higgins]

Adding Ryan (sorry to everyone else for the spam).