[PATCH 01/89] dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema

[PATCH 01/89] dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema

[Maxime Ripard]

Switch the DT binding to a YAML schema to enable the DT validation.

Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 59 +++++++-
 Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt       | 26 +---
 MAINTAINERS                                                 |  2 +-
 3 files changed, 60 insertions(+), 27 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt

diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
new file mode 100644
index 000000000000..3189d74096e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,brcmstb-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB BSC IIC Master Controller
+
+maintainers:
+  - Kamal Dasu <kdasu.kdev@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,brcmstb-i2c
+      - brcm,brcmper-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  clock-frequency:
+    enum:
+      - 46875
+      - 50000
+      - 93750
+      - 97500
+      - 187500
+      - 200000
+      - 375000
+      - 390000
+
+required:
+  - compatible
+  - reg
+  - clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      bsca: i2c@f0406200 {
+          clock-frequency = <390000>;
+          compatible = "brcm,brcmstb-i2c";
+          interrupt-parent = <&irq0_intc>;
+          reg = <0xf0406200 0x58>;
+          interrupts = <0x18>;
+          interrupt-names = "upg_bsca";
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
deleted file mode 100644
index 0380609b177a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Broadcom stb bsc iic master controller
-
-Required properties:
-
-- compatible: should be "brcm,brcmstb-i2c" or "brcm,brcmper-i2c"
-- clock-frequency: 32-bit decimal value of iic master clock freqency in Hz
-		   valid values are 375000, 390000, 187500, 200000
-		   93750, 97500, 46875 and 50000
-- reg: specifies the base physical address and size of the registers
-
-Optional properties :
-
-- interrupts: specifies the interrupt number, the irq line to be used
-- interrupt-names: Interrupt name string
-
-Example:
-
-bsca: i2c@f0406200 {
-      clock-frequency = <390000>;
-      compatible = "brcm,brcmstb-i2c";
-      interrupt-parent = <&irq0_intc>;
-      reg = <0xf0406200 0x58>;
-      interrupts = <0x18>;
-      interrupt-names = "upg_bsca";
-};
-
diff --git a/MAINTAINERS b/MAINTAINERS
index 38fe2f3f7b6f..9e45ed8be540 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3431,7 +3431,7 @@ L:	linux-i2c@vger.kernel.org
 L:	bcm-kernel-feedback-list@broadcom.com
 S:	Supported
 F:	drivers/i2c/busses/i2c-brcmstb.c
-F:	Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
+F:	Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
 
 BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
 M:	Al Cooper <alcooperx@gmail.com>
-- 
git-series 0.9.1

[PATCH 02/89] dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding

[Maxime Ripard]

The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
EDID. This block is split into two parts, the BSC and the AUTO_I2C,
lying in two separate register areas.

The AUTO_I2C block has a mailbox-like interface and will take away the
BSC control from the CPU if enabled. However, the BSC is the actually
the same controller than the one supported by the brcmstb driver, and
the AUTO_I2C doesn't really bring any immediate benefit.

We can model it in the DT as a single device with two register range,
which will allow us to use or or the other in the driver without
changing anything in the DT.

Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 40 ++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
index 3189d74096e8..edbca2476128 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -15,11 +15,21 @@ allOf:
 properties:
   compatible:
     enum:
+      - brcm,bcm2711-hdmi-i2c
       - brcm,brcmstb-i2c
       - brcm,brcmper-i2c
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: BSC register range
+      - description: Auto-I2C register range
+
+  reg-names:
+    items:
+      - const: bsc
+      - const: auto-i2c
 
   interrupts:
     maxItems: 1
@@ -45,6 +55,26 @@ required:
 
 unevaluatedProperties: false
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm2711-hdmi-i2c
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+  required:
+    - reg-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
 examples:
   - |
       bsca: i2c@f0406200 {
@@ -56,4 +86,12 @@ examples:
           interrupt-names = "upg_bsca";
       };
 
+  - |
+      ddc0: i2c@7ef04500 {
+          compatible = "brcm,bcm2711-hdmi-i2c";
+          reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+          reg-names = "bsc", "auto-i2c";
+          clock-frequency = <390000>;
+      };
+
 ...
-- 
git-series 0.9.1

[PATCH 03/89] i2c: brcmstb: Support BCM2711 HDMI BSC controllers

[Maxime Ripard]

The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
EDID. This block is split into two parts, the BSC and the AUTO_I2C,
lying in two separate register areas.

The AUTO_I2C block has a mailbox-like interface and will take away the
BSC control from the CPU if enabled. However, the BSC is the actually
the same controller than the one supported by the brcmstb driver, and
the AUTO_I2C doesn't really bring any immediate benefit.

Let's use the BSC then, but let's also tie the AUTO_I2C registers with a
separate compatible so that we can enable AUTO_I2C if needed in the
future.

The AUTO_I2C is enabled by default at boot though, so we first need to
release the BSC from the AUTO_I2C control.

Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/i2c/busses/i2c-brcmstb.c | 33 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+)

diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 506991596b68..169a2836922d 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -580,6 +580,31 @@ static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev)
 	brcmstb_i2c_set_bus_speed(dev);
 }
 
+#define AUTOI2C_CTRL0		0x26c
+#define AUTOI2C_CTRL0_RELEASE_BSC	BIT(1)
+
+static int bcm2711_release_bsc(struct brcmstb_i2c_dev *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev->device);
+	struct resource *iomem;
+	void __iomem *autoi2c;
+
+	/* Map hardware registers */
+	iomem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "auto-i2c");
+	autoi2c = devm_ioremap_resource(&pdev->dev, iomem);
+	if (IS_ERR(autoi2c))
+		return PTR_ERR(autoi2c);
+
+	writel(AUTOI2C_CTRL0_RELEASE_BSC, autoi2c + AUTOI2C_CTRL0);
+	devm_iounmap(&pdev->dev, autoi2c);
+
+	/* We need to reset the controller after the release */
+	dev->bsc_regmap->iic_enable = 0;
+	bsc_writel(dev, dev->bsc_regmap->iic_enable, iic_enable);
+
+	return 0;
+}
+
 static int brcmstb_i2c_probe(struct platform_device *pdev)
 {
 	int rc = 0;
@@ -609,6 +634,13 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
 		goto probe_errorout;
 	}
 
+	if (of_device_is_compatible(dev->device->of_node,
+				    "brcm,bcm2711-hdmi-i2c")) {
+		rc = bcm2711_release_bsc(dev);
+		if (rc)
+			goto probe_errorout;
+	}
+
 	rc = of_property_read_string(dev->device->of_node, "interrupt-names",
 				     &int_name);
 	if (rc < 0)
@@ -705,6 +737,7 @@ static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend,
 static const struct of_device_id brcmstb_i2c_of_match[] = {
 	{.compatible = "brcm,brcmstb-i2c"},
 	{.compatible = "brcm,brcmper-i2c"},
+	{.compatible = "brcm,bcm2711-hdmi-i2c"},
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match);
-- 
git-series 0.9.1

[PATCH 04/89] i2c: brcmstb: Allow to compile it on BCM2835

[Maxime Ripard]

The BCM2711, supported by ARCH_BCM2835, also has a controller by the
brcmstb driver so let's allow it to be compiled on that platform.

Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2ddca08f8a76..9b8494de4a59 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -476,7 +476,7 @@ config I2C_BCM_KONA
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
 	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
-		   COMPILE_TEST
+		   COMPILE_TEST || ARCH_BCM2835
 	default y
 	help
 	  If you say yes to this option, support will be included for the
-- 
git-series 0.9.1

Re: [PATCH 04/89] i2c: brcmstb: Allow to compile it on BCM2835

[Florian Fainelli]

On 2/24/20 1:06 AM, Maxime Ripard wrote:
> The BCM2711, supported by ARCH_BCM2835, also has a controller by the
> brcmstb driver so let's allow it to be compiled on that platform.
> 
> Cc: Kamal Dasu <kdasu.kdev@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: linux-i2c@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 01/89] dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema

[Florian Fainelli]

On 2/24/20 1:06 AM, Maxime Ripard wrote:
> Switch the DT binding to a YAML schema to enable the DT validation.
> 
> Cc: Kamal Dasu <kdasu.kdev@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: linux-i2c@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 03/89] i2c: brcmstb: Support BCM2711 HDMI BSC controllers

[Florian Fainelli]

On 2/24/20 1:06 AM, Maxime Ripard wrote:
> The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
> EDID. This block is split into two parts, the BSC and the AUTO_I2C,
> lying in two separate register areas.
> 
> The AUTO_I2C block has a mailbox-like interface and will take away the
> BSC control from the CPU if enabled. However, the BSC is the actually
> the same controller than the one supported by the brcmstb driver, and
> the AUTO_I2C doesn't really bring any immediate benefit.
> 
> Let's use the BSC then, but let's also tie the AUTO_I2C registers with a
> separate compatible so that we can enable AUTO_I2C if needed in the
> future.
> 
> The AUTO_I2C is enabled by default at boot though, so we first need to
> release the BSC from the AUTO_I2C control.
> 
> Cc: Kamal Dasu <kdasu.kdev@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: linux-i2c@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

[snip]

> @@ -705,6 +737,7 @@ static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend,
>  static const struct of_device_id brcmstb_i2c_of_match[] = {
>  	{.compatible = "brcm,brcmstb-i2c"},
>  	{.compatible = "brcm,brcmper-i2c"},
> +	{.compatible = "brcm,bcm2711-hdmi-i2c"},

You could have added the bcm2711_release_bsc here as a function attached
with the of_device_id::data member of the structure and do:

if (data && data->init_func)
	rc = data->init_func(dev);

But we can defer that until we have a second compatible string that
requires the same approach.

Akked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 02/89] dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding

[Florian Fainelli]

On 2/24/20 1:06 AM, Maxime Ripard wrote:
> The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
> EDID. This block is split into two parts, the BSC and the AUTO_I2C,
> lying in two separate register areas.
> 
> The AUTO_I2C block has a mailbox-like interface and will take away the
> BSC control from the CPU if enabled. However, the BSC is the actually
> the same controller than the one supported by the brcmstb driver, and
> the AUTO_I2C doesn't really bring any immediate benefit.
> 
> We can model it in the DT as a single device with two register range,
> which will allow us to use or or the other in the driver without
> changing anything in the DT.
> 
> Cc: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
> Cc: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org
> Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Maxime Ripard <maxime-R63rPqgGiG5yDzI6CaY1VQ@public.gmane.org>

Acked-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
-- 
Florian

Re: [PATCH 01/89] dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema

[Rob Herring]

On Mon, 24 Feb 2020 10:06:03 +0100, Maxime Ripard wrote:
> Switch the DT binding to a YAML schema to enable the DT validation.
> 
> Cc: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
> Cc: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org
> Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Maxime Ripard <maxime-R63rPqgGiG5yDzI6CaY1VQ@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 59 +++++++-
>  Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt       | 26 +---
>  MAINTAINERS                                                 |  2 +-
>  3 files changed, 60 insertions(+), 27 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
>  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
> 

Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

Re: [PATCH 02/89] dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding

[Rob Herring]

On Mon, 24 Feb 2020 10:06:04 +0100, Maxime Ripard wrote:
> The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
> EDID. This block is split into two parts, the BSC and the AUTO_I2C,
> lying in two separate register areas.
> 
> The AUTO_I2C block has a mailbox-like interface and will take away the
> BSC control from the CPU if enabled. However, the BSC is the actually
> the same controller than the one supported by the brcmstb driver, and
> the AUTO_I2C doesn't really bring any immediate benefit.
> 
> We can model it in the DT as a single device with two register range,
> which will allow us to use or or the other in the driver without
> changing anything in the DT.
> 
> Cc: Kamal Dasu <kdasu.kdev@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: linux-i2c@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
>  Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 40 ++++++-
>  1 file changed, 39 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH 01/89] dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 597 bytes --]

On Mon, Feb 24, 2020 at 10:06:03AM +0100, Maxime Ripard wrote:
> Switch the DT binding to a YAML schema to enable the DT validation.
> 
> Cc: Kamal Dasu <kdasu.kdev@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: linux-i2c@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

I didn't get the cover letter, so I assume I shall pick the I2C patches.
Please let me have the cover letter next time.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 01/89] dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 724 bytes --]

On Mon, Feb 24, 2020 at 10:06:03AM +0100, Maxime Ripard wrote:
> Switch the DT binding to a YAML schema to enable the DT validation.
> 
> Cc: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
> Cc: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org
> Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Maxime Ripard <maxime-R63rPqgGiG5yDzI6CaY1VQ@public.gmane.org>

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 02/89] dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 1299 bytes --]

On Mon, Feb 24, 2020 at 10:06:04AM +0100, Maxime Ripard wrote:
> The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
> EDID. This block is split into two parts, the BSC and the AUTO_I2C,
> lying in two separate register areas.
> 
> The AUTO_I2C block has a mailbox-like interface and will take away the
> BSC control from the CPU if enabled. However, the BSC is the actually
> the same controller than the one supported by the brcmstb driver, and
> the AUTO_I2C doesn't really bring any immediate benefit.
> 
> We can model it in the DT as a single device with two register range,
> which will allow us to use or or the other in the driver without
> changing anything in the DT.
> 
> Cc: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
> Cc: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org
> Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Maxime Ripard <maxime-R63rPqgGiG5yDzI6CaY1VQ@public.gmane.org>

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 03/89] i2c: brcmstb: Support BCM2711 HDMI BSC controllers

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 1712 bytes --]

On Mon, Feb 24, 2020 at 10:06:05AM +0100, Maxime Ripard wrote:
> The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
> EDID. This block is split into two parts, the BSC and the AUTO_I2C,
> lying in two separate register areas.
> 
> The AUTO_I2C block has a mailbox-like interface and will take away the
> BSC control from the CPU if enabled. However, the BSC is the actually
> the same controller than the one supported by the brcmstb driver, and
> the AUTO_I2C doesn't really bring any immediate benefit.
> 
> Let's use the BSC then, but let's also tie the AUTO_I2C registers with a
> separate compatible so that we can enable AUTO_I2C if needed in the
> future.
> 
> The AUTO_I2C is enabled by default at boot though, so we first need to
> release the BSC from the AUTO_I2C control.
> 
> Cc: Kamal Dasu <kdasu.kdev@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: linux-i2c@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Fixed the acked-by and applied to for-next, thanks!

FYI, cppcheck rightfully warned about this in the driver:

drivers/i2c/busses/i2c-brcmstb.c:319:7: warning: Condition 'CMD_RD' is always true [knownConditionTrueFalse]
 if ((CMD_RD || CMD_WR) &&
      ^
drivers/i2c/busses/i2c-brcmstb.c:319:17: warning: Condition 'CMD_WR' is always false [knownConditionTrueFalse]
 if ((CMD_RD || CMD_WR) &&
                ^
drivers/i2c/busses/i2c-brcmstb.c:464:0: warning: Variable 'len' is assigned a value that is never used. [unreadVariable]
 int len = 0;

Not related to this patch, but maybe one of you is interested...


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 04/89] i2c: brcmstb: Allow to compile it on BCM2835

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 243 bytes --]


>  config I2C_BRCMSTB
>  	tristate "BRCM Settop/DSL I2C controller"
>  	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
> -		   COMPILE_TEST
> +		   COMPILE_TEST || ARCH_BCM2835

Can you please sort if for easier maintenance?


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]