[PATCH 0/5] v3u: enable I2C0-6

[PATCH 0/5] v3u: enable I2C0-6

[Wolfram Sang]

These patches are needed to enable I2C on the Falcon board for the V3U.
Patch #5 is only for demonstration purposes. The series depends on my
RWDT series, Ulrich's PFC v2 series and Geert's DMA placeholder. A
branch can be found here:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/v3u/i2c

There is also a series in-flight to handle spurious interrupts on the
V3U. Because I have never seen one, I wouldn't call it a dependency, so
the series is handled seperately.

Looking forward to comments...


Koji Matsuoka (2):
  arm64: dts: renesas: Add I2C to R8A779A0
  arm64: dts: renesas: Add I2C support for falcon board

Wolfram Sang (3):
  dt-bindings: i2c: renesas,i2c: add r8a779a0 (V3U) support
  clk: renesas: r8a779a0: add clocks for I2C
  v3u: enable other I2C busses for testing

 .../devicetree/bindings/i2c/renesas,i2c.txt   |   1 +
 .../boot/dts/renesas/r8a779a0-falcon.dts      |  93 +++++++++++++
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi     | 122 ++++++++++++++++++
 drivers/clk/renesas/r8a779a0-cpg-mssr.c       |   7 +
 4 files changed, 223 insertions(+)

-- 
2.28.0

[PATCH 1/5] dt-bindings: i2c: renesas,i2c: add r8a779a0 (V3U) support

[Wolfram Sang]

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 Documentation/devicetree/bindings/i2c/renesas,i2c.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
index 96d869ac3839..5762d2d1ab9c 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
@@ -26,6 +26,7 @@ Required properties:
 	"renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC.
 	"renesas,i2c-r8a77990" if the device is a part of a R8A77990 SoC.
 	"renesas,i2c-r8a77995" if the device is a part of a R8A77995 SoC.
+	"renesas,i2c-r8a779a0" if the device is a part of a R8A779A0 SoC.
 	"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
 	"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
 				device.
-- 
2.28.0

Re: [PATCH 1/5] dt-bindings: i2c: renesas,i2c: add r8a779a0 (V3U) support

[Geert Uytterhoeven]

On Wed, Dec 23, 2020 at 6:27 PM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

> --- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
> +++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
> @@ -26,6 +26,7 @@ Required properties:
>         "renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC.
>         "renesas,i2c-r8a77990" if the device is a part of a R8A77990 SoC.
>         "renesas,i2c-r8a77995" if the device is a part of a R8A77995 SoC.
> +       "renesas,i2c-r8a779a0" if the device is a part of a R8A779A0 SoC.
>         "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
>         "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
>                                 device.

Note that this doesn't say anything about (in)compatibility with generic
R-Car Gen3 compatible devices (hint: yaml conversion?).

New features:
  - Slave Clock Stretch Select,
  - Fast Mode+ Enable,
  - Enhanced First Bit Setup Cycle configuration.

Looks like the R-Car V3U variant can be treated as a generic R-Car Gen3
variant (lacking the new features, of course).

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 1/5] dt-bindings: i2c: renesas,i2c: add r8a779a0 (V3U) support

[Rob Herring]

On Wed, 23 Dec 2020 18:25:00 +0100, Wolfram Sang wrote:
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>  Documentation/devicetree/bindings/i2c/renesas,i2c.txt | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 1/5] dt-bindings: i2c: renesas,i2c: add r8a779a0 (V3U) support

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 158 bytes --]

On Wed, Dec 23, 2020 at 06:25:00PM +0100, Wolfram Sang wrote:
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/5] dt-bindings: i2c: renesas,i2c: add r8a779a0 (V3U) support

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 621 bytes --]


> New features:
>   - Slave Clock Stretch Select,
>   - Fast Mode+ Enable,
>   - Enhanced First Bit Setup Cycle configuration.
> 
> Looks like the R-Car V3U variant can be treated as a generic R-Car Gen3
> variant (lacking the new features, of course).

FM+ doesn't need an update. It will just handle higher values for the
bus frequency. This is also the most likely one to be supported in
Linux. First Bit setup is not even supported yet in the basic version.
Configuration via Linux is unclear same as SlaveClockStretch. Use cases
are unclear, too, which we would need for implementating any of this.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]