From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Biju Das <biju.das.jz@bp.renesas.com>
Cc: "Philipp Zabel" <p.zabel@pengutronix.de>,
"Chris Brandt" <chris.brandt@renesas.com>,
"Wolfram Sang" <wsa+renesas@sang-engineering.com>,
"Arnd Bergmann" <arnd@arndb.de>,
"Jarkko Nikula" <jarkko.nikula@linux.intel.com>,
"Jean Delvare" <jdelvare@suse.de>,
"Khalil Blaiech" <kblaiech@mellanox.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@canonical.com>,
"Bence Csókás" <bence98@sch.bme.hu>,
"Yicong Yang" <yangyicong@hisilicon.com>,
"Mike Rapoport" <rppt@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Linux I2C" <linux-i2c@vger.kernel.org>,
"Chris Paterson" <Chris.Paterson2@renesas.com>,
"Biju Das" <biju.das@bp.renesas.com>,
"Prabhakar Mahadev Lad" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Linux-Renesas <linux-renesas-soc@vger.kernel.org>
Subject: Re: [PATCH 3/5] i2c: riic: Add RZ/G2L support
Date: Mon, 14 Jun 2021 14:38:23 +0200 [thread overview]
Message-ID: <CAMuHMdWWgehDTxTcm8=ooq2-4BkY0jgo+hwfrM_PHc6iw6aP8A@mail.gmail.com> (raw)
In-Reply-To: <20210611165624.30749-4-biju.das.jz@bp.renesas.com>
Hi Biju,
On Fri, Jun 11, 2021 at 6:56 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> RZ/G2L i2c controller is compatible with RZ/A i2c controller.
> By default IP is in reset state, so need to perform release
> reset before accessing any register.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Thanks for your patch!
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -941,6 +941,7 @@ config I2C_QUP
> config I2C_RIIC
> tristate "Renesas RIIC adapter"
> depends on ARCH_RENESAS || COMPILE_TEST
> + select RESET_CONTROLLER
if ARCH_R9A07G044?
> --- a/drivers/i2c/busses/i2c-riic.c
> +++ b/drivers/i2c/busses/i2c-riic.c
_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL);
> if (!riic)
> @@ -412,6 +421,17 @@ static int riic_i2c_probe(struct platform_device *pdev)
> return PTR_ERR(riic->clk);
> }
>
> + type = (enum riic_type)of_device_get_match_data(&pdev->dev);
> + if (type == RIIC_RZ_G2L) {
> + rstc = devm_reset_control_get(&pdev->dev, NULL);
> + if (IS_ERR(rstc)) {
> + dev_err(&pdev->dev, "Error: missing reset ctrl\n");
> + return PTR_ERR(rstc);
> + }
> +
> + reset_control_deassert(rstc);
Just wondering: does it harm if the driver is unloaded or unbounded,
and rebound while the I2C controller is not in reset state?
> + }
> +
> for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) {
> res = platform_get_resource(pdev, IORESOURCE_IRQ, riic_irqs[i].res_num);
> if (!res)
> @@ -472,6 +492,7 @@ static int riic_i2c_remove(struct platform_device *pdev)
> }
>
> static const struct of_device_id riic_i2c_dt_ids[] = {
> + { .compatible = "renesas,riic-r9a07g044", .data = (void *)RIIC_RZ_G2L },
> { .compatible = "renesas,riic-rz" },
Please fill in .data, to avoid relying implicitly on RIIC_RZ_A being zero.
> { /* Sentinel */ },
> };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2021-06-14 12:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 16:56 [PATCH 0/5] Add RZ/G2L I2C support Biju Das
2021-06-11 16:56 ` [PATCH 1/5] dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller Biju Das
2021-06-14 12:43 ` Geert Uytterhoeven
2021-06-11 16:56 ` [PATCH 3/5] i2c: riic: Add RZ/G2L support Biju Das
2021-06-14 12:38 ` Geert Uytterhoeven [this message]
2021-06-14 16:04 ` Biju Das
2021-06-14 13:27 ` Philipp Zabel
2021-06-14 13:38 ` Geert Uytterhoeven
2021-06-14 17:20 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMuHMdWWgehDTxTcm8=ooq2-4BkY0jgo+hwfrM_PHc6iw6aP8A@mail.gmail.com' \
--to=geert@linux-m68k.org \
--cc=Chris.Paterson2@renesas.com \
--cc=arnd@arndb.de \
--cc=bence98@sch.bme.hu \
--cc=biju.das.jz@bp.renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=chris.brandt@renesas.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=jdelvare@suse.de \
--cc=kblaiech@mellanox.com \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=rppt@kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wsa+renesas@sang-engineering.com \
--cc=yangyicong@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).