Linux-i3c Archive on
 help / color / Atom feed
* [PATCH] i3c: master: Add of_node_put() before return
@ 2019-07-23 10:37 Nishka Dasgupta
  0 siblings, 0 replies; only message in thread
From: Nishka Dasgupta @ 2019-07-23 10:37 UTC (permalink / raw)
  To: bbrezillon, linux-i3c; +Cc: Nishka Dasgupta

Each iteration of for_each_available_childe_of_node puts the previous
node, but in the case of a return from the middle of the loop, there
is no put, thus causing a memory leak. Add an of_node_put before the
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <>
 drivers/i3c/master.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index d6f8b038a896..116d4e7ef25c 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -2093,8 +2093,10 @@ static int of_populate_i3c_bus(struct i3c_master_controller *master)
 	for_each_available_child_of_node(i3cbus_np, node) {
 		ret = of_i3c_master_add_dev(master, node);
-		if (ret)
+		if (ret) {
+			of_node_put(node);
 			return ret;
+		}

linux-i3c mailing list

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-23 10:37 [PATCH] i3c: master: Add of_node_put() before return Nishka Dasgupta

Linux-i3c Archive on

Archives are clonable:
	git clone --mirror linux-i3c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i3c linux-i3c/ \
	public-inbox-index linux-i3c

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone