[PATCH V5 0/8] i3c: master: svc: some bug fixes and add runtime pm support

[PATCH V5 0/8] i3c: master: svc: some bug fixes and add runtime pm support

[Clark Wang]

Hi Miquel,

Currently, only the fourth patch needs to be reviewed, and the rest have been
added with your review tag.

Thank you very much for your comments! :)

V5 changes:
 - i3c: master: svc: add support for slave to stop returning data
   - remove <%s> in logs
   - add some spaces
   - !SVC_I3C_MSTATUS_STATE(reg) -> SVC_I3C_MSTATUS_STATE_IDLE(reg)
 - i3c: master: svc: add runtime pm support
   - create svc_i3c_master_prepare_clks() and svc_i3c_master_unprepare_clks()

V4 changes:
 - New patches:
   - i3c: master: svc: separate err, fifo and disable interrupt of reset function
   - i3c: master: svc: add the missing module device table
   - i3c: master: svc: enable the interrupt in the enable ibi function
 - i3c: master: svc: add support for slave to stop returning data
   - Only use COMPLETE flag in the read function.
   - Add a reset before each transfer.
 - i3c: master: svc: add runtime pm support
    - error path emit_stop only used in svc_i3c_master_do_daa() for one time, so
      remove it. Or it needs another goto command at the end of the function to
      skip it and to go to rpm_out.

V3 changes:
 - i3c: master: svc: add runtime pm support:
   - restore the error path of probe function
   - enable runtime pm just before i3c module reset

V2 changes:
 - align the parameters of the function in the second patch
 - add a new patch to support runtime PM.

Clark Wang (8):
  i3c: master: svc: move module reset behind clk enable
  i3c: master: svc: fix atomic issue
  i3c: master: svc: separate err, fifo and disable interrupt of reset
    function
  i3c: master: svc: add support for slave to stop returning data
  i3c: master: svc: set ODSTOP to let I2C device see the STOP signal
  i3c: master: svc: add runtime pm support
  i3c: master: svc: add the missing module device table
  i3c: master: svc: enable the interrupt in the enable ibi function

 drivers/i3c/master/svc-i3c-master.c | 341 ++++++++++++++++++++--------
 1 file changed, 250 insertions(+), 91 deletions(-)

-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH V5 1/8] i3c: master: svc: move module reset behind clk enable

[Clark Wang]

Reset I3C module will R/W its regs, so enable its clocks first.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
---
V5:
No change.
---
 drivers/i3c/master/svc-i3c-master.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 879e5a64acaf..c25a372f6820 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -1381,8 +1381,6 @@ static int svc_i3c_master_probe(struct platform_device *pdev)
 
 	master->dev = dev;
 
-	svc_i3c_master_reset(master);
-
 	ret = clk_prepare_enable(master->pclk);
 	if (ret)
 		return ret;
@@ -1419,6 +1417,8 @@ static int svc_i3c_master_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, master);
 
+	svc_i3c_master_reset(master);
+
 	/* Register the master */
 	ret = i3c_master_register(&master->base, &pdev->dev,
 				  &svc_i3c_master_ops, false);
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH V5 2/8] i3c: master: svc: fix atomic issue

[Clark Wang]

do_daa_locked() function is in a spin lock environment, use
readl_poll_timeout_atomic() to replace the origin
readl_poll_timeout().

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
---
V5:
No change.
---
 drivers/i3c/master/svc-i3c-master.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index c25a372f6820..47c02a60cf62 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -656,8 +656,10 @@ static int svc_i3c_master_readb(struct svc_i3c_master *master, u8 *dst,
 	u32 reg;
 
 	for (i = 0; i < len; i++) {
-		ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
-					 SVC_I3C_MSTATUS_RXPEND(reg), 0, 1000);
+		ret = readl_poll_timeout_atomic(master->regs + SVC_I3C_MSTATUS,
+						reg,
+						SVC_I3C_MSTATUS_RXPEND(reg),
+						0, 1000);
 		if (ret)
 			return ret;
 
@@ -687,10 +689,11 @@ static int svc_i3c_master_do_daa_locked(struct svc_i3c_master *master,
 		 * Either one slave will send its ID, or the assignment process
 		 * is done.
 		 */
-		ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
-					 SVC_I3C_MSTATUS_RXPEND(reg) |
-					 SVC_I3C_MSTATUS_MCTRLDONE(reg),
-					 1, 1000);
+		ret = readl_poll_timeout_atomic(master->regs + SVC_I3C_MSTATUS,
+						reg,
+						SVC_I3C_MSTATUS_RXPEND(reg) |
+						SVC_I3C_MSTATUS_MCTRLDONE(reg),
+						1, 1000);
 		if (ret)
 			return ret;
 
@@ -744,11 +747,12 @@ static int svc_i3c_master_do_daa_locked(struct svc_i3c_master *master,
 		}
 
 		/* Wait for the slave to be ready to receive its address */
-		ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
-					 SVC_I3C_MSTATUS_MCTRLDONE(reg) &&
-					 SVC_I3C_MSTATUS_STATE_DAA(reg) &&
-					 SVC_I3C_MSTATUS_BETWEEN(reg),
-					 0, 1000);
+		ret = readl_poll_timeout_atomic(master->regs + SVC_I3C_MSTATUS,
+						reg,
+						SVC_I3C_MSTATUS_MCTRLDONE(reg) &&
+						SVC_I3C_MSTATUS_STATE_DAA(reg) &&
+						SVC_I3C_MSTATUS_BETWEEN(reg),
+						0, 1000);
 		if (ret)
 			return ret;
 
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH V5 3/8] i3c: master: svc: separate err, fifo and disable interrupt of reset function

[Clark Wang]

Sometimes only need to reset err and fifo regs, so split the origin
reset function to three functions.
Put them at the top of the file, to let more functions can call them.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
---
V5:
 - add Miquel's reviewed tag
---
 drivers/i3c/master/svc-i3c-master.c | 59 +++++++++++++++++------------
 1 file changed, 34 insertions(+), 25 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 47c02a60cf62..4e69c691253d 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -236,6 +236,40 @@ static void svc_i3c_master_disable_interrupts(struct svc_i3c_master *master)
 	writel(mask, master->regs + SVC_I3C_MINTCLR);
 }
 
+static void svc_i3c_master_clear_merrwarn(struct svc_i3c_master *master)
+{
+	/* Clear pending warnings */
+	writel(readl(master->regs + SVC_I3C_MERRWARN),
+	       master->regs + SVC_I3C_MERRWARN);
+}
+
+static void svc_i3c_master_flush_fifo(struct svc_i3c_master *master)
+{
+	/* Flush FIFOs */
+	writel(SVC_I3C_MDATACTRL_FLUSHTB | SVC_I3C_MDATACTRL_FLUSHRB,
+	       master->regs + SVC_I3C_MDATACTRL);
+}
+
+static void svc_i3c_master_reset_fifo_trigger(struct svc_i3c_master *master)
+{
+	u32 reg;
+
+	/* Set RX and TX tigger levels, flush FIFOs */
+	reg = SVC_I3C_MDATACTRL_FLUSHTB |
+	      SVC_I3C_MDATACTRL_FLUSHRB |
+	      SVC_I3C_MDATACTRL_UNLOCK_TRIG |
+	      SVC_I3C_MDATACTRL_TXTRIG_FIFO_NOT_FULL |
+	      SVC_I3C_MDATACTRL_RXTRIG_FIFO_NOT_EMPTY;
+	writel(reg, master->regs + SVC_I3C_MDATACTRL);
+}
+
+static void svc_i3c_master_reset(struct svc_i3c_master *master)
+{
+	svc_i3c_master_clear_merrwarn(master);
+	svc_i3c_master_reset_fifo_trigger(master);
+	svc_i3c_master_disable_interrupts(master);
+}
+
 static inline struct svc_i3c_master *
 to_svc_i3c_master(struct i3c_master_controller *master)
 {
@@ -279,12 +313,6 @@ static void svc_i3c_master_emit_stop(struct svc_i3c_master *master)
 	udelay(1);
 }
 
-static void svc_i3c_master_clear_merrwarn(struct svc_i3c_master *master)
-{
-	writel(readl(master->regs + SVC_I3C_MERRWARN),
-	       master->regs + SVC_I3C_MERRWARN);
-}
-
 static int svc_i3c_master_handle_ibi(struct svc_i3c_master *master,
 				     struct i3c_dev_desc *dev)
 {
@@ -1334,25 +1362,6 @@ static const struct i3c_master_controller_ops svc_i3c_master_ops = {
 	.disable_ibi = svc_i3c_master_disable_ibi,
 };
 
-static void svc_i3c_master_reset(struct svc_i3c_master *master)
-{
-	u32 reg;
-
-	/* Clear pending warnings */
-	writel(readl(master->regs + SVC_I3C_MERRWARN),
-	       master->regs + SVC_I3C_MERRWARN);
-
-	/* Set RX and TX tigger levels, flush FIFOs */
-	reg = SVC_I3C_MDATACTRL_FLUSHTB |
-	      SVC_I3C_MDATACTRL_FLUSHRB |
-	      SVC_I3C_MDATACTRL_UNLOCK_TRIG |
-	      SVC_I3C_MDATACTRL_TXTRIG_FIFO_NOT_FULL |
-	      SVC_I3C_MDATACTRL_RXTRIG_FIFO_NOT_EMPTY;
-	writel(reg, master->regs + SVC_I3C_MDATACTRL);
-
-	svc_i3c_master_disable_interrupts(master);
-}
-
 static int svc_i3c_master_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH V5 4/8] i3c: master: svc: add support for slave to stop returning data

[Clark Wang]

When i3c controller reads data from slave device, slave device can stop
returning data with an ACK after any byte.
Add this support for svc i3c controller. Otherwise, it will timeout
when the slave device ends the read operation early.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
---
V5:
 - remove <%s> in logs
 - add some spaces
 - !SVC_I3C_MSTATUS_STATE(reg) -> SVC_I3C_MSTATUS_STATE_IDLE(reg)
---
 drivers/i3c/master/svc-i3c-master.c | 56 ++++++++++++++++++++---------
 1 file changed, 40 insertions(+), 16 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 4e69c691253d..74b38772d692 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -896,27 +896,35 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
 static int svc_i3c_master_read(struct svc_i3c_master *master,
 			       u8 *in, unsigned int len)
 {
-	int offset = 0, i, ret;
-	u32 mdctrl;
+	int offset = 0, i;
+	u32 mdctrl, mstatus;
+	bool completed = false;
+	unsigned int count;
+	unsigned long start = jiffies;
 
-	while (offset < len) {
-		unsigned int count;
+	while (!completed) {
+		mstatus = readl(master->regs + SVC_I3C_MSTATUS);
+		if (SVC_I3C_MSTATUS_COMPLETE(mstatus) != 0)
+			completed = true;
 
-		ret = readl_poll_timeout(master->regs + SVC_I3C_MDATACTRL,
-					 mdctrl,
-					 !(mdctrl & SVC_I3C_MDATACTRL_RXEMPTY),
-					 0, 1000);
-		if (ret)
-			return ret;
+		if (time_after(jiffies, start + msecs_to_jiffies(1000))) {
+			dev_dbg(master->dev, "I3C read timeout\n");
+			return -ETIMEDOUT;
+		}
 
+		mdctrl = readl(master->regs + SVC_I3C_MDATACTRL);
 		count = SVC_I3C_MDATACTRL_RXCOUNT(mdctrl);
+		if (offset + count > len) {
+			dev_err(master->dev, "I3C receive length too long!\n");
+			return -EINVAL;
+		}
 		for (i = 0; i < count; i++)
 			in[offset + i] = readl(master->regs + SVC_I3C_MRDATAB);
 
 		offset += count;
 	}
 
-	return 0;
+	return offset;
 }
 
 static int svc_i3c_master_write(struct svc_i3c_master *master,
@@ -949,7 +957,7 @@ static int svc_i3c_master_write(struct svc_i3c_master *master,
 static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 			       bool rnw, unsigned int xfer_type, u8 addr,
 			       u8 *in, const u8 *out, unsigned int xfer_len,
-			       unsigned int read_len, bool continued)
+			       unsigned int *read_len, bool continued)
 {
 	u32 reg;
 	int ret;
@@ -959,7 +967,7 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 	       SVC_I3C_MCTRL_IBIRESP_NACK |
 	       SVC_I3C_MCTRL_DIR(rnw) |
 	       SVC_I3C_MCTRL_ADDR(addr) |
-	       SVC_I3C_MCTRL_RDTERM(read_len),
+	       SVC_I3C_MCTRL_RDTERM(*read_len),
 	       master->regs + SVC_I3C_MCTRL);
 
 	ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
@@ -971,17 +979,27 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 		ret = svc_i3c_master_read(master, in, xfer_len);
 	else
 		ret = svc_i3c_master_write(master, out, xfer_len);
-	if (ret)
+	if (ret < 0)
 		goto emit_stop;
 
+	if (rnw)
+		*read_len = ret;
+
 	ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
 				 SVC_I3C_MSTATUS_COMPLETE(reg), 0, 1000);
 	if (ret)
 		goto emit_stop;
 
-	if (!continued)
+	writel(SVC_I3C_MINT_COMPLETE, master->regs + SVC_I3C_MSTATUS);
+
+	if (!continued) {
 		svc_i3c_master_emit_stop(master);
 
+		/* Wait idle if stop is sent. */
+		readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
+				   SVC_I3C_MSTATUS_STATE_IDLE(reg), 0, 1000);
+	}
+
 	return 0;
 
 emit_stop:
@@ -1039,12 +1057,15 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
 	if (!xfer)
 		return;
 
+	svc_i3c_master_clear_merrwarn(master);
+	svc_i3c_master_flush_fifo(master);
+
 	for (i = 0; i < xfer->ncmds; i++) {
 		struct svc_i3c_cmd *cmd = &xfer->cmds[i];
 
 		ret = svc_i3c_master_xfer(master, cmd->rnw, xfer->type,
 					  cmd->addr, cmd->in, cmd->out,
-					  cmd->len, cmd->read_len,
+					  cmd->len, &cmd->read_len,
 					  cmd->continued);
 		if (ret)
 			break;
@@ -1173,6 +1194,9 @@ static int svc_i3c_master_send_direct_ccc_cmd(struct svc_i3c_master *master,
 	if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000)))
 		svc_i3c_master_dequeue_xfer(master, xfer);
 
+	if (cmd->read_len != xfer_len)
+		ccc->dests[0].payload.len = cmd->read_len;
+
 	ret = xfer->ret;
 	svc_i3c_master_free_xfer(xfer);
 
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH V5 5/8] i3c: master: svc: set ODSTOP to let I2C device see the STOP signal

[Clark Wang]

If using I2C/I3C mixed mode, need to set ODSTOP. Otherwise, the I2C
devices cannot see the stop signal. It may cause message sending errors.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
---
V5:
No change.
---
 drivers/i3c/master/svc-i3c-master.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 74b38772d692..bc9c7fd69cbe 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -477,7 +477,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 	struct i3c_device_info info = {};
 	unsigned long fclk_rate, fclk_period_ns;
 	unsigned int high_period_ns, od_low_period_ns;
-	u32 ppbaud, pplow, odhpp, odbaud, i2cbaud, reg;
+	u32 ppbaud, pplow, odhpp, odbaud, odstop, i2cbaud, reg;
 	int ret;
 
 	/* Timings derivation */
@@ -507,6 +507,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 	switch (bus->mode) {
 	case I3C_BUS_MODE_PURE:
 		i2cbaud = 0;
+		odstop = 0;
 		break;
 	case I3C_BUS_MODE_MIXED_FAST:
 	case I3C_BUS_MODE_MIXED_LIMITED:
@@ -515,6 +516,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 		 * between the high and low period does not really matter.
 		 */
 		i2cbaud = DIV_ROUND_UP(1000, od_low_period_ns) - 2;
+		odstop = 1;
 		break;
 	case I3C_BUS_MODE_MIXED_SLOW:
 		/*
@@ -522,6 +524,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 		 * constraints as the FM+ mode.
 		 */
 		i2cbaud = DIV_ROUND_UP(2500, od_low_period_ns) - 2;
+		odstop = 1;
 		break;
 	default:
 		return -EINVAL;
@@ -530,7 +533,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 	reg = SVC_I3C_MCONFIG_MASTER_EN |
 	      SVC_I3C_MCONFIG_DISTO(0) |
 	      SVC_I3C_MCONFIG_HKEEP(0) |
-	      SVC_I3C_MCONFIG_ODSTOP(0) |
+	      SVC_I3C_MCONFIG_ODSTOP(odstop) |
 	      SVC_I3C_MCONFIG_PPBAUD(ppbaud) |
 	      SVC_I3C_MCONFIG_PPLOW(pplow) |
 	      SVC_I3C_MCONFIG_ODBAUD(odbaud) |
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH V5 6/8] i3c: master: svc: add runtime pm support

[Clark Wang]

Add runtime pm support to dynamically manage the clock.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
---
V5:
 - create svc_i3c_master_prepare_clks() and svc_i3c_master_unprepare_clks() 
 - add Miquel's reviewed tag
---
 drivers/i3c/master/svc-i3c-master.c | 196 ++++++++++++++++++++++------
 1 file changed, 156 insertions(+), 40 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index bc9c7fd69cbe..884f5349fb76 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -17,7 +17,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 /* Master Mode Registers */
 #define SVC_I3C_MCONFIG      0x000
@@ -119,6 +121,7 @@
 #define   SVC_MDYNADDR_ADDR(x) FIELD_PREP(GENMASK(7, 1), (x))
 
 #define SVC_I3C_MAX_DEVS 32
+#define SVC_I3C_PM_TIMEOUT_MS 1000
 
 /* This parameter depends on the implementation and may be tuned */
 #define SVC_I3C_FIFO_SIZE 16
@@ -480,10 +483,20 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 	u32 ppbaud, pplow, odhpp, odbaud, odstop, i2cbaud, reg;
 	int ret;
 
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev,
+			"<%s> cannot resume i3c bus master, err: %d\n",
+			__func__, ret);
+		return ret;
+	}
+
 	/* Timings derivation */
 	fclk_rate = clk_get_rate(master->fclk);
-	if (!fclk_rate)
-		return -EINVAL;
+	if (!fclk_rate) {
+		ret = -EINVAL;
+		goto rpm_out;
+	}
 
 	fclk_period_ns = DIV_ROUND_UP(1000000000, fclk_rate);
 
@@ -527,7 +540,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 		odstop = 1;
 		break;
 	default:
-		return -EINVAL;
+		goto rpm_out;
 	}
 
 	reg = SVC_I3C_MCONFIG_MASTER_EN |
@@ -545,7 +558,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 	/* Master core's registration */
 	ret = i3c_master_get_free_addr(m, 0);
 	if (ret < 0)
-		return ret;
+		goto rpm_out;
 
 	info.dyn_addr = ret;
 
@@ -554,21 +567,35 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 
 	ret = i3c_master_set_info(&master->base, &info);
 	if (ret)
-		return ret;
+		goto rpm_out;
 
 	svc_i3c_master_enable_interrupts(master, SVC_I3C_MINT_SLVSTART);
 
-	return 0;
+rpm_out:
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
+
+	return ret;
 }
 
 static void svc_i3c_master_bus_cleanup(struct i3c_master_controller *m)
 {
 	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
+		return;
+	}
 
 	svc_i3c_master_disable_interrupts(master);
 
 	/* Disable master */
 	writel(0, master->regs + SVC_I3C_MCONFIG);
+
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
 }
 
 static int svc_i3c_master_reserve_slot(struct svc_i3c_master *master)
@@ -867,31 +894,36 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
 	unsigned int dev_nb;
 	int ret, i;
 
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
+		return ret;
+	}
+
 	spin_lock_irqsave(&master->xferqueue.lock, flags);
 	ret = svc_i3c_master_do_daa_locked(master, addrs, &dev_nb);
 	spin_unlock_irqrestore(&master->xferqueue.lock, flags);
-	if (ret)
-		goto emit_stop;
+	if (ret) {
+		svc_i3c_master_emit_stop(master);
+		svc_i3c_master_clear_merrwarn(master);
+		goto rpm_out;
+	}
 
 	/* Register all devices who participated to the core */
 	for (i = 0; i < dev_nb; i++) {
 		ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
 		if (ret)
-			return ret;
+			goto rpm_out;
 	}
 
 	/* Configure IBI auto-rules */
 	ret = svc_i3c_update_ibirules(master);
-	if (ret) {
+	if (ret)
 		dev_err(master->dev, "Cannot handle such a list of devices");
-		return ret;
-	}
-
-	return 0;
 
-emit_stop:
-	svc_i3c_master_emit_stop(master);
-	svc_i3c_master_clear_merrwarn(master);
+rpm_out:
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
 
 	return ret;
 }
@@ -1060,6 +1092,12 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
 	if (!xfer)
 		return;
 
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
+		return;
+	}
+
 	svc_i3c_master_clear_merrwarn(master);
 	svc_i3c_master_flush_fifo(master);
 
@@ -1074,6 +1112,9 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
 			break;
 	}
 
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
+
 	xfer->ret = ret;
 	complete(&xfer->comp);
 
@@ -1350,6 +1391,14 @@ static void svc_i3c_master_free_ibi(struct i3c_dev_desc *dev)
 static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
 {
 	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
+		return ret;
+	}
 
 	return i3c_master_enec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
 }
@@ -1357,8 +1406,15 @@ static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
 static int svc_i3c_master_disable_ibi(struct i3c_dev_desc *dev)
 {
 	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	int ret;
+
+	ret = i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
 
-	return i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
+
+	return ret;
 }
 
 static void svc_i3c_master_recycle_ibi_slot(struct i3c_dev_desc *dev,
@@ -1389,6 +1445,37 @@ static const struct i3c_master_controller_ops svc_i3c_master_ops = {
 	.disable_ibi = svc_i3c_master_disable_ibi,
 };
 
+static int svc_i3c_master_prepare_clks(struct svc_i3c_master *master)
+{
+	int ret = 0;
+
+	ret = clk_prepare_enable(master->pclk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(master->fclk);
+	if (ret) {
+		clk_disable_unprepare(master->pclk);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(master->sclk);
+	if (ret) {
+		clk_disable_unprepare(master->pclk);
+		clk_disable_unprepare(master->fclk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void svc_i3c_master_unprepare_clks(struct svc_i3c_master *master)
+{
+	clk_disable_unprepare(master->pclk);
+	clk_disable_unprepare(master->fclk);
+	clk_disable_unprepare(master->sclk);
+}
+
 static int svc_i3c_master_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1421,24 +1508,16 @@ static int svc_i3c_master_probe(struct platform_device *pdev)
 
 	master->dev = dev;
 
-	ret = clk_prepare_enable(master->pclk);
+	ret = svc_i3c_master_prepare_clks(master);
 	if (ret)
 		return ret;
 
-	ret = clk_prepare_enable(master->fclk);
-	if (ret)
-		goto err_disable_pclk;
-
-	ret = clk_prepare_enable(master->sclk);
-	if (ret)
-		goto err_disable_fclk;
-
 	INIT_WORK(&master->hj_work, svc_i3c_master_hj_work);
 	INIT_WORK(&master->ibi_work, svc_i3c_master_ibi_work);
 	ret = devm_request_irq(dev, master->irq, svc_i3c_master_irq_handler,
 			       IRQF_NO_SUSPEND, "svc-i3c-irq", master);
 	if (ret)
-		goto err_disable_sclk;
+		goto err_disable_clks;
 
 	master->free_slots = GENMASK(SVC_I3C_MAX_DEVS - 1, 0);
 
@@ -1452,29 +1531,38 @@ static int svc_i3c_master_probe(struct platform_device *pdev)
 					 GFP_KERNEL);
 	if (!master->ibi.slots) {
 		ret = -ENOMEM;
-		goto err_disable_sclk;
+		goto err_disable_clks;
 	}
 
 	platform_set_drvdata(pdev, master);
 
+	pm_runtime_set_autosuspend_delay(&pdev->dev, SVC_I3C_PM_TIMEOUT_MS);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	svc_i3c_master_reset(master);
 
 	/* Register the master */
 	ret = i3c_master_register(&master->base, &pdev->dev,
 				  &svc_i3c_master_ops, false);
 	if (ret)
-		goto err_disable_sclk;
+		goto rpm_disable;
+
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
 
 	return 0;
 
-err_disable_sclk:
-	clk_disable_unprepare(master->sclk);
+rpm_disable:
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
-err_disable_fclk:
-	clk_disable_unprepare(master->fclk);
-
-err_disable_pclk:
-	clk_disable_unprepare(master->pclk);
+err_disable_clks:
+	svc_i3c_master_unprepare_clks(master);
 
 	return ret;
 }
@@ -1488,13 +1576,40 @@ static int svc_i3c_master_remove(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	clk_disable_unprepare(master->pclk);
-	clk_disable_unprepare(master->fclk);
-	clk_disable_unprepare(master->sclk);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
 
+static int __maybe_unused svc_i3c_runtime_suspend(struct device *dev)
+{
+	struct svc_i3c_master *master = dev_get_drvdata(dev);
+
+	svc_i3c_master_unprepare_clks(master);
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int __maybe_unused svc_i3c_runtime_resume(struct device *dev)
+{
+	struct svc_i3c_master *master = dev_get_drvdata(dev);
+	int ret = 0;
+
+	pinctrl_pm_select_default_state(dev);
+	svc_i3c_master_prepare_clks(master);
+
+	return ret;
+}
+
+static const struct dev_pm_ops svc_i3c_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(svc_i3c_runtime_suspend,
+			   svc_i3c_runtime_resume, NULL)
+};
+
 static const struct of_device_id svc_i3c_master_of_match_tbl[] = {
 	{ .compatible = "silvaco,i3c-master" },
 	{ /* sentinel */ },
@@ -1506,6 +1621,7 @@ static struct platform_driver svc_i3c_master = {
 	.driver = {
 		.name = "silvaco-i3c-master",
 		.of_match_table = svc_i3c_master_of_match_tbl,
+		.pm = &svc_i3c_pm_ops,
 	},
 };
 module_platform_driver(svc_i3c_master);
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH V5 7/8] i3c: master: svc: add the missing module device table

[Clark Wang]

The missing MODULE_DEVICE_TABLE() will cause the svc-i3c-master cannot
be auto probed when it is built in moudle.
So add it.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
---
V5:
 - add Miquel's reviewed tag
---
 drivers/i3c/master/svc-i3c-master.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 884f5349fb76..3bc81ef95334 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -1614,6 +1614,7 @@ static const struct of_device_id svc_i3c_master_of_match_tbl[] = {
 	{ .compatible = "silvaco,i3c-master" },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, svc_i3c_master_of_match_tbl);
 
 static struct platform_driver svc_i3c_master = {
 	.probe = svc_i3c_master_probe,
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH V5 8/8] i3c: master: svc: enable the interrupt in the enable ibi function

[Clark Wang]

If enable interrupt in the svc_i3c_master_bus_init() but do not call
enable ibi in the device driver, it will cause a kernel dump in the
svc_i3c_master_handle_ibi() when a slave start occurs on the i3c bus,
because the data->ibi_pool is not initialized.
So only enable the interrupt in svc_i3c_master_enable_ibi() function.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
V5:
 - Yes, it actually happened when I try the lsmdo6d sensor's ibi function.
 - add Miquel's reviewed tag
---
 drivers/i3c/master/svc-i3c-master.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 3bc81ef95334..7550dad64ecf 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -569,8 +569,6 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 	if (ret)
 		goto rpm_out;
 
-	svc_i3c_master_enable_interrupts(master, SVC_I3C_MINT_SLVSTART);
-
 rpm_out:
 	pm_runtime_mark_last_busy(master->dev);
 	pm_runtime_put_autosuspend(master->dev);
@@ -1400,6 +1398,8 @@ static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
 		return ret;
 	}
 
+	svc_i3c_master_enable_interrupts(master, SVC_I3C_MINT_SLVSTART);
+
 	return i3c_master_enec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
 }
 
@@ -1409,6 +1409,8 @@ static int svc_i3c_master_disable_ibi(struct i3c_dev_desc *dev)
 	struct svc_i3c_master *master = to_svc_i3c_master(m);
 	int ret;
 
+	svc_i3c_master_disable_interrupts(master);
+
 	ret = i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
 
 	pm_runtime_mark_last_busy(master->dev);
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

Re: [PATCH V5 4/8] i3c: master: svc: add support for slave to stop returning data

[Miquel Raynal]

Hi Clark,

xiaoning.wang@nxp.com wrote on Mon, 27 Dec 2021 15:45:25 +0800:

> When i3c controller reads data from slave device, slave device can stop
> returning data with an ACK after any byte.
> Add this support for svc i3c controller. Otherwise, it will timeout
> when the slave device ends the read operation early.
> 
> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
> Reviewed-by: Jun Li <jun.li@nxp.com>

Looks good to me :)

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

Cheers,
Miquèl

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

Re: [PATCH V5 0/8] i3c: master: svc: some bug fixes and add runtime pm support

[Alexandre Belloni]

On Mon, 27 Dec 2021 15:45:21 +0800, Clark Wang wrote:
> Currently, only the fourth patch needs to be reviewed, and the rest have been
> added with your review tag.
> 
> Thank you very much for your comments! :)
> 
> V5 changes:
>  - i3c: master: svc: add support for slave to stop returning data
>    - remove <%s> in logs
>    - add some spaces
>    - !SVC_I3C_MSTATUS_STATE(reg) -> SVC_I3C_MSTATUS_STATE_IDLE(reg)
>  - i3c: master: svc: add runtime pm support
>    - create svc_i3c_master_prepare_clks() and svc_i3c_master_unprepare_clks()
> 
> [...]

Applied, thanks!

[1/8] i3c: master: svc: move module reset behind clk enable
      commit: 57d8d3fc060c7337bc78376ccc699ab80162b7d5
[2/8] i3c: master: svc: fix atomic issue
      commit: a84a9222b2be2949f11f2d7c487052ac2afed4d4
[3/8] i3c: master: svc: separate err, fifo and disable interrupt of reset function
      commit: 9fd6b5ce8523460b024361a802f5e5738d2da543
[4/8] i3c: master: svc: add support for slave to stop returning data
      commit: d5e512574dd2eb06ace859b27cafb0de41743bb5
[5/8] i3c: master: svc: set ODSTOP to let I2C device see the STOP signal
      commit: 173fcb27210b18b38f1080f1c8f806e02cf8a53b
[6/8] i3c: master: svc: add runtime pm support
      commit: 05be23ef78f76a741d529226a8764d81c719a1e3
[7/8] i3c: master: svc: add the missing module device table
      commit: c5d4587bb9a9a03b30bbc928b4a007fcd1f8c279
[8/8] i3c: master: svc: enable the interrupt in the enable ibi function
      commit: 7ff730ca458e841dbcdc87f264d7afe3eaed525e

Best regards,
-- 
Alexandre Belloni <alexandre.belloni@bootlin.com>

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c