Linux-i3c Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] i3c: master: fix for SETDASA and DAA process
@ 2020-05-14 16:30 Parshuram Thombare
  2020-05-20  8:58 ` Boris Brezillon
  0 siblings, 1 reply; 3+ messages in thread
From: Parshuram Thombare @ 2020-05-14 16:30 UTC (permalink / raw)
  To: bbrezillon, vitor.soares
  Cc: mparab, Parshuram Thombare, praneeth, linux-kernel, pgaj, linux-i3c

This patch fix following issues.
1. Controller slots blocked for devices with static_addr
   but no init_dyn_addr may limit the number of I3C devices
   on the bus which gets dynamic address in DAA. So
   instead of attaching all the devices with static_addr,
   now we only attach the devices which successfully
   complete SETDASA. Remaining devices are handled in DAA.
2. Since we alreay handled devices with init_dyn_addr, removed
   it's handling from i3c_master_add_i3c_dev_locked().
   Now only case handled is devices already with dyn_addr
   participated in DAA, and again got new dyn_addr with an
   extra slot in the master controller.
3. Removed unnecessary i3c_master_reattach_i3c_dev() from
   i3c_master_add_i3c_dev_locked(), right away after finding
   if duplicate device exists in the I3C list.
   In case of different new and old dyn_addr
   i3c_master_reattach_i3c_dev() will fail which is wrong,
   and in case of same dyn_addr it doesn't add anything new.

Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
---
 drivers/i3c/master.c | 111 ++++++++++++++++++-------------------------
 1 file changed, 46 insertions(+), 65 deletions(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 5f4bd52121fe..f1d929b58549 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1375,6 +1375,11 @@ static int i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev,
 		i3c_bus_set_addr_slot_status(&master->bus,
 					     dev->info.dyn_addr,
 					     I3C_ADDR_SLOT_I3C_DEV);
+
+		if (old_dyn_addr)
+			i3c_bus_set_addr_slot_status(&master->bus,
+						     old_dyn_addr,
+						     I3C_ADDR_SLOT_FREE);
 	}
 
 	if (master->ops->reattach_i3c_dev) {
@@ -1426,33 +1431,52 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
 		master->ops->detach_i2c_dev(dev);
 }
 
-static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
+static void i3c_master_pre_assign_dyn_addr(struct i3c_master_controller *master,
+					   struct i3c_dev_boardinfo *boardinfo)
 {
-	struct i3c_master_controller *master = i3c_dev_get_master(dev);
+	struct i3c_device_info info = {
+		.static_addr = boardinfo->static_addr,
+	};
+	struct i3c_dev_desc *i3cdev;
 	int ret;
 
-	if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
-	    !dev->boardinfo->static_addr)
+	/*
+	 * We anyway don't attach devices which are not addressable
+	 * (no static_addr and dyn_addr) and devices with static_addr
+	 * but no init_dyn_addr will participate in DAA.
+	 */
+	if (!boardinfo->static_addr || !boardinfo->init_dyn_addr)
+		return;
+
+	i3cdev = i3c_master_alloc_i3c_dev(master, &info);
+	if (IS_ERR(i3cdev))
 		return;
 
-	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
-					dev->boardinfo->init_dyn_addr);
+	i3cdev->boardinfo = boardinfo;
+
+	ret = i3c_master_attach_i3c_dev(master, i3cdev);
 	if (ret)
 		return;
 
-	dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
-	ret = i3c_master_reattach_i3c_dev(dev, 0);
+	ret = i3c_master_setdasa_locked(master, i3cdev->info.static_addr,
+					i3cdev->boardinfo->init_dyn_addr);
 	if (ret)
-		goto err_rstdaa;
+		goto err_setdasa;
 
-	ret = i3c_master_retrieve_dev_info(dev);
+	i3cdev->info.dyn_addr = i3cdev->boardinfo->init_dyn_addr;
+	ret = i3c_master_reattach_i3c_dev(i3cdev, 0);
 	if (ret)
 		goto err_rstdaa;
 
-	return;
+	ret = i3c_master_retrieve_dev_info(i3cdev);
+	if (ret)
+		goto err_rstdaa;
 
 err_rstdaa:
-	i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
+	i3c_master_rstdaa_locked(master, i3cdev->boardinfo->init_dyn_addr);
+err_setdasa:
+	i3c_master_detach_i3c_dev(i3cdev);
+	i3c_master_free_i3c_dev(i3cdev);
 }
 
 static void
@@ -1619,8 +1643,8 @@ static void i3c_master_detach_free_devs(struct i3c_master_controller *master)
  * This function is following all initialisation steps described in the I3C
  * specification:
  *
- * 1. Attach I2C and statically defined I3C devs to the master so that the
- *    master can fill its internal device table appropriately
+ * 1. Attach I2C devs to the master so that the master can fill its internal
+ *    device table appropriately
  *
  * 2. Call &i3c_master_controller_ops->bus_init() method to initialize
  *    the master controller. That's usually where the bus mode is selected
@@ -1647,7 +1671,6 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 	enum i3c_addr_slot_status status;
 	struct i2c_dev_boardinfo *i2cboardinfo;
 	struct i3c_dev_boardinfo *i3cboardinfo;
-	struct i3c_dev_desc *i3cdev;
 	struct i2c_dev_desc *i2cdev;
 	int ret;
 
@@ -1679,34 +1702,6 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 			goto err_detach_devs;
 		}
 	}
-	list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
-		struct i3c_device_info info = {
-			.static_addr = i3cboardinfo->static_addr,
-		};
-
-		if (i3cboardinfo->init_dyn_addr) {
-			status = i3c_bus_get_addr_slot_status(&master->bus,
-						i3cboardinfo->init_dyn_addr);
-			if (status != I3C_ADDR_SLOT_FREE) {
-				ret = -EBUSY;
-				goto err_detach_devs;
-			}
-		}
-
-		i3cdev = i3c_master_alloc_i3c_dev(master, &info);
-		if (IS_ERR(i3cdev)) {
-			ret = PTR_ERR(i3cdev);
-			goto err_detach_devs;
-		}
-
-		i3cdev->boardinfo = i3cboardinfo;
-
-		ret = i3c_master_attach_i3c_dev(master, i3cdev);
-		if (ret) {
-			i3c_master_free_i3c_dev(i3cdev);
-			goto err_detach_devs;
-		}
-	}
 
 	/*
 	 * Now execute the controller specific ->bus_init() routine, which
@@ -1746,8 +1741,8 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 	 * Pre-assign dynamic address and retrieve device information if
 	 * needed.
 	 */
-	i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
-		i3c_master_pre_assign_dyn_addr(i3cdev);
+	list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node)
+		i3c_master_pre_assign_dyn_addr(master, i3cboardinfo);
 
 	ret = i3c_master_do_daa(master);
 	if (ret)
@@ -1811,7 +1806,7 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
 {
 	struct i3c_device_info info = { .dyn_addr = addr };
 	struct i3c_dev_desc *newdev, *olddev;
-	u8 old_dyn_addr = addr, expected_dyn_addr;
+	u8 old_dyn_addr = addr;
 	struct i3c_ibi_setup ibireq = { };
 	bool enable_ibi = false;
 	int ret;
@@ -1866,39 +1861,25 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
 		i3c_master_free_i3c_dev(olddev);
 	}
 
-	ret = i3c_master_reattach_i3c_dev(newdev, old_dyn_addr);
-	if (ret)
-		goto err_detach_dev;
-
 	/*
 	 * Depending on our previous state, the expected dynamic address might
 	 * differ:
 	 * - if the device already had a dynamic address assigned, let's try to
-	 *   re-apply this one
-	 * - if the device did not have a dynamic address and the firmware
-	 *   requested a specific address, pick this one
+	 *   re-apply this one. Device with dyn_addr participated in DAA ?
 	 * - in any other case, keep the address automatically assigned by the
 	 *   master
 	 */
-	if (old_dyn_addr && old_dyn_addr != newdev->info.dyn_addr)
-		expected_dyn_addr = old_dyn_addr;
-	else if (newdev->boardinfo && newdev->boardinfo->init_dyn_addr)
-		expected_dyn_addr = newdev->boardinfo->init_dyn_addr;
-	else
-		expected_dyn_addr = newdev->info.dyn_addr;
-
-	if (newdev->info.dyn_addr != expected_dyn_addr) {
+	if (old_dyn_addr && old_dyn_addr != newdev->info.dyn_addr) {
 		/*
 		 * Try to apply the expected dynamic address. If it fails, keep
 		 * the address assigned by the master.
 		 */
 		ret = i3c_master_setnewda_locked(master,
 						 newdev->info.dyn_addr,
-						 expected_dyn_addr);
+						 old_dyn_addr);
 		if (!ret) {
-			old_dyn_addr = newdev->info.dyn_addr;
-			newdev->info.dyn_addr = expected_dyn_addr;
-			i3c_master_reattach_i3c_dev(newdev, old_dyn_addr);
+			newdev->info.dyn_addr = old_dyn_addr;
+			i3c_master_reattach_i3c_dev(newdev, addr);
 		} else {
 			dev_err(&master->dev,
 				"Failed to assign reserved/old address to device %d%llx",
-- 
2.17.1


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] i3c: master: fix for SETDASA and DAA process
  2020-05-14 16:30 [PATCH] i3c: master: fix for SETDASA and DAA process Parshuram Thombare
@ 2020-05-20  8:58 ` Boris Brezillon
  2020-05-20  9:20   ` Parshuram Raju Thombare
  0 siblings, 1 reply; 3+ messages in thread
From: Boris Brezillon @ 2020-05-20  8:58 UTC (permalink / raw)
  To: Parshuram Thombare
  Cc: mparab, bbrezillon, praneeth, linux-kernel, vitor.soares, pgaj,
	linux-i3c

On Thu, 14 May 2020 18:30:09 +0200
Parshuram Thombare <pthombar@cadence.com> wrote:

> This patch fix following issues.
> 1. Controller slots blocked for devices with static_addr
>    but no init_dyn_addr may limit the number of I3C devices
>    on the bus which gets dynamic address in DAA. So
>    instead of attaching all the devices with static_addr,
>    now we only attach the devices which successfully
>    complete SETDASA. Remaining devices are handled in DAA.
> 2. Since we alreay handled devices with init_dyn_addr, removed
>    it's handling from i3c_master_add_i3c_dev_locked().
>    Now only case handled is devices already with dyn_addr
>    participated in DAA, and again got new dyn_addr with an
>    extra slot in the master controller.

I don't get that one.

> 3. Removed unnecessary i3c_master_reattach_i3c_dev() from
>    i3c_master_add_i3c_dev_locked(), right away after finding
>    if duplicate device exists in the I3C list.
>    In case of different new and old dyn_addr
>    i3c_master_reattach_i3c_dev() will fail which is wrong,
>    and in case of same dyn_addr it doesn't add anything new.

I think we should fix re-attach instead, which is what we discussed
with Przemek if I remember correctly.

> 

Can you please split the patch accordingly (one fix per commit)?

> Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
> Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
> ---
>  drivers/i3c/master.c | 111 ++++++++++++++++++-------------------------
>  1 file changed, 46 insertions(+), 65 deletions(-)
> 
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index 5f4bd52121fe..f1d929b58549 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -1375,6 +1375,11 @@ static int i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev,
>  		i3c_bus_set_addr_slot_status(&master->bus,
>  					     dev->info.dyn_addr,
>  					     I3C_ADDR_SLOT_I3C_DEV);
> +
> +		if (old_dyn_addr)
> +			i3c_bus_set_addr_slot_status(&master->bus,
> +						     old_dyn_addr,
> +						     I3C_ADDR_SLOT_FREE);
>  	}
>  
>  	if (master->ops->reattach_i3c_dev) {
> @@ -1426,33 +1431,52 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
>  		master->ops->detach_i2c_dev(dev);
>  }
>  
> -static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
> +static void i3c_master_pre_assign_dyn_addr(struct i3c_master_controller *master,
> +					   struct i3c_dev_boardinfo *boardinfo)
>  {
> -	struct i3c_master_controller *master = i3c_dev_get_master(dev);
> +	struct i3c_device_info info = {
> +		.static_addr = boardinfo->static_addr,
> +	};
> +	struct i3c_dev_desc *i3cdev;
>  	int ret;
>  
> -	if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
> -	    !dev->boardinfo->static_addr)
> +	/*
> +	 * We anyway don't attach devices which are not addressable
> +	 * (no static_addr and dyn_addr) and devices with static_addr
> +	 * but no init_dyn_addr will participate in DAA.
> +	 */
> +	if (!boardinfo->static_addr || !boardinfo->init_dyn_addr)
> +		return;
> +
> +	i3cdev = i3c_master_alloc_i3c_dev(master, &info);
> +	if (IS_ERR(i3cdev))
>  		return;
>  
> -	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
> -					dev->boardinfo->init_dyn_addr);
> +	i3cdev->boardinfo = boardinfo;
> +
> +	ret = i3c_master_attach_i3c_dev(master, i3cdev);
>  	if (ret)
>  		return;
>  
> -	dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
> -	ret = i3c_master_reattach_i3c_dev(dev, 0);
> +	ret = i3c_master_setdasa_locked(master, i3cdev->info.static_addr,
> +					i3cdev->boardinfo->init_dyn_addr);
>  	if (ret)
> -		goto err_rstdaa;
> +		goto err_setdasa;
>  
> -	ret = i3c_master_retrieve_dev_info(dev);
> +	i3cdev->info.dyn_addr = i3cdev->boardinfo->init_dyn_addr;
> +	ret = i3c_master_reattach_i3c_dev(i3cdev, 0);
>  	if (ret)
>  		goto err_rstdaa;
>  
> -	return;
> +	ret = i3c_master_retrieve_dev_info(i3cdev);
> +	if (ret)
> +		goto err_rstdaa;
>  
>  err_rstdaa:
> -	i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
> +	i3c_master_rstdaa_locked(master, i3cdev->boardinfo->init_dyn_addr);
> +err_setdasa:
> +	i3c_master_detach_i3c_dev(i3cdev);
> +	i3c_master_free_i3c_dev(i3cdev);
>  }
>  
>  static void
> @@ -1619,8 +1643,8 @@ static void i3c_master_detach_free_devs(struct i3c_master_controller *master)
>   * This function is following all initialisation steps described in the I3C
>   * specification:
>   *
> - * 1. Attach I2C and statically defined I3C devs to the master so that the
> - *    master can fill its internal device table appropriately
> + * 1. Attach I2C devs to the master so that the master can fill its internal
> + *    device table appropriately
>   *
>   * 2. Call &i3c_master_controller_ops->bus_init() method to initialize
>   *    the master controller. That's usually where the bus mode is selected
> @@ -1647,7 +1671,6 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
>  	enum i3c_addr_slot_status status;
>  	struct i2c_dev_boardinfo *i2cboardinfo;
>  	struct i3c_dev_boardinfo *i3cboardinfo;
> -	struct i3c_dev_desc *i3cdev;
>  	struct i2c_dev_desc *i2cdev;
>  	int ret;
>  
> @@ -1679,34 +1702,6 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
>  			goto err_detach_devs;
>  		}
>  	}
> -	list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
> -		struct i3c_device_info info = {
> -			.static_addr = i3cboardinfo->static_addr,
> -		};
> -
> -		if (i3cboardinfo->init_dyn_addr) {
> -			status = i3c_bus_get_addr_slot_status(&master->bus,
> -						i3cboardinfo->init_dyn_addr);
> -			if (status != I3C_ADDR_SLOT_FREE) {
> -				ret = -EBUSY;
> -				goto err_detach_devs;
> -			}
> -		}
> -
> -		i3cdev = i3c_master_alloc_i3c_dev(master, &info);
> -		if (IS_ERR(i3cdev)) {
> -			ret = PTR_ERR(i3cdev);
> -			goto err_detach_devs;
> -		}
> -
> -		i3cdev->boardinfo = i3cboardinfo;
> -
> -		ret = i3c_master_attach_i3c_dev(master, i3cdev);
> -		if (ret) {
> -			i3c_master_free_i3c_dev(i3cdev);
> -			goto err_detach_devs;
> -		}
> -	}
>  
>  	/*
>  	 * Now execute the controller specific ->bus_init() routine, which
> @@ -1746,8 +1741,8 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
>  	 * Pre-assign dynamic address and retrieve device information if
>  	 * needed.
>  	 */
> -	i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
> -		i3c_master_pre_assign_dyn_addr(i3cdev);
> +	list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node)
> +		i3c_master_pre_assign_dyn_addr(master, i3cboardinfo);
>  
>  	ret = i3c_master_do_daa(master);
>  	if (ret)
> @@ -1811,7 +1806,7 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
>  {
>  	struct i3c_device_info info = { .dyn_addr = addr };
>  	struct i3c_dev_desc *newdev, *olddev;
> -	u8 old_dyn_addr = addr, expected_dyn_addr;
> +	u8 old_dyn_addr = addr;
>  	struct i3c_ibi_setup ibireq = { };
>  	bool enable_ibi = false;
>  	int ret;
> @@ -1866,39 +1861,25 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
>  		i3c_master_free_i3c_dev(olddev);
>  	}
>  
> -	ret = i3c_master_reattach_i3c_dev(newdev, old_dyn_addr);
> -	if (ret)
> -		goto err_detach_dev;
> -
>  	/*
>  	 * Depending on our previous state, the expected dynamic address might
>  	 * differ:
>  	 * - if the device already had a dynamic address assigned, let's try to
> -	 *   re-apply this one
> -	 * - if the device did not have a dynamic address and the firmware
> -	 *   requested a specific address, pick this one
> +	 *   re-apply this one. Device with dyn_addr participated in DAA ?
>  	 * - in any other case, keep the address automatically assigned by the
>  	 *   master
>  	 */
> -	if (old_dyn_addr && old_dyn_addr != newdev->info.dyn_addr)
> -		expected_dyn_addr = old_dyn_addr;
> -	else if (newdev->boardinfo && newdev->boardinfo->init_dyn_addr)
> -		expected_dyn_addr = newdev->boardinfo->init_dyn_addr;
> -	else
> -		expected_dyn_addr = newdev->info.dyn_addr;
> -
> -	if (newdev->info.dyn_addr != expected_dyn_addr) {
> +	if (old_dyn_addr && old_dyn_addr != newdev->info.dyn_addr) {
>  		/*
>  		 * Try to apply the expected dynamic address. If it fails, keep
>  		 * the address assigned by the master.
>  		 */
>  		ret = i3c_master_setnewda_locked(master,
>  						 newdev->info.dyn_addr,
> -						 expected_dyn_addr);
> +						 old_dyn_addr);
>  		if (!ret) {
> -			old_dyn_addr = newdev->info.dyn_addr;
> -			newdev->info.dyn_addr = expected_dyn_addr;
> -			i3c_master_reattach_i3c_dev(newdev, old_dyn_addr);
> +			newdev->info.dyn_addr = old_dyn_addr;
> +			i3c_master_reattach_i3c_dev(newdev, addr);
>  		} else {
>  			dev_err(&master->dev,
>  				"Failed to assign reserved/old address to device %d%llx",


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 3+ messages in thread

* RE: [PATCH] i3c: master: fix for SETDASA and DAA process
  2020-05-20  8:58 ` Boris Brezillon
@ 2020-05-20  9:20   ` Parshuram Raju Thombare
  0 siblings, 0 replies; 3+ messages in thread
From: Parshuram Raju Thombare @ 2020-05-20  9:20 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Milind Parab, bbrezillon, praneeth, linux-kernel, vitor.soares,
	Przemyslaw Gaj, linux-i3c

>> This patch fix following issues.
>> 1. Controller slots blocked for devices with static_addr
>>    but no init_dyn_addr may limit the number of I3C devices
>>    on the bus which gets dynamic address in DAA. So
>>    instead of attaching all the devices with static_addr,
>>    now we only attach the devices which successfully
>>    complete SETDASA. Remaining devices are handled in DAA.
>> 2. Since we alreay handled devices with init_dyn_addr, removed
>>    it's handling from i3c_master_add_i3c_dev_locked().
>>    Now only case handled is devices already with dyn_addr
>>    participated in DAA, and again got new dyn_addr with an
>>    extra slot in the master controller.
>
>I don't get that one.

I mean retry  to assign requested init_dyn_addr in i3c_master_add_i3c_dev_locked().
Since we handle devices with init_dyn_addr in i3c_master_pre_assign_dyn_addr,
we should have assigned dynamic address to all devices with both static_addr and
init_dyn_addr. Unless SETDASA failed or device only have init_dyn_addr but no static_addr, 
in those cases dyn_addr is allocated in DAA.

>I think we should fix re-attach instead, which is what we discussed
>with Przemek if I remember correctly.

Sorry, I was not aware of that. But, yes I agree to fix driver re-attach instead of removing 
re attach here. But we should keep in mind about potential failure here.
Currently reattach only update dyn_addr, but IMO it should update other fields as well.
Also I see re attach have a unused argument, which I suppose we can get rid of.
For now I will keep reattach here and post reattach fix in separate patch.

>Can you please split the patch accordingly (one fix per commit)
I think only extra changes are releasing the old address in reattach API
and removal of reattach call in i3c_master_add_i3c_dev_locked()
after a scan for duplicate I3C device. 
I will remove those changes and repost rest.

Regards,
Parshuram Thombare

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-14 16:30 [PATCH] i3c: master: fix for SETDASA and DAA process Parshuram Thombare
2020-05-20  8:58 ` Boris Brezillon
2020-05-20  9:20   ` Parshuram Raju Thombare

Linux-i3c Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-i3c/0 linux-i3c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i3c linux-i3c/ https://lore.kernel.org/linux-i3c \
		linux-i3c@lists.infradead.org
	public-inbox-index linux-i3c

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-i3c


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git