From: Michael Schmitz <schmitzmic@gmail.com>
To: linux-m68k@vger.kernel.org, geert@linux-m68k.org
Cc: linux-ide@vger.kernel.org, fthain@linux-m68k.org,
Michael Schmitz <schmitzmic@gmail.com>
Subject: [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari
Date: Wed, 9 Jun 2021 19:22:02 +1200 [thread overview]
Message-ID: <1623223322-4242-1-git-send-email-schmitzmic@gmail.com> (raw)
In-Reply-To: <1622957313-321-1-git-send-email-schmitzmic@gmail.com>
Current io_mm.h uses address translation and ROM port IO primitives when
port addresses are below 1024, and raw untranslated MMIO IO primitives
else when CONFIG_ATARI_ROM_ISA is set. This is done regardless of the
m68k machine type a multi-platform kernel runs on. As a consequence,
the Q40 IDE driver in multiplatform kernels cannot work.
Conversely, the Atari IDE driver uses wrong address translation if a
multiplatform Q40 and Atari kernel does _not_ set CONFIG_ATARI_ROM_ISA.
Replace MMIO by ISA IO primitives for addresses > 1024 (if isa_type
is ISA_TYPE_ENEC), and change the ISA address translation used for
Atari to a no-op for those addresses.
Switch readb()/writeb() and readw()/writew() to their ISA equivalents
also. Change the address translation functions to return the identity
translation if CONFIG_ATARI_ROM_ISA is not defined, and set MULTI_ISA
for kernels where Q40 and Atari are both configured so this can actually
work (isa_type set to Q40 at compile time else).
Fixes: 84b16b7b0d5c818f ("m68k/atari: ROM port ISA adapter support")
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
--
Changes from v1:
Geert Uytterhoeven;
- fix Fixes tag
- remove comment about isa_sex zero initialization
- move default return outside switch statement in address
translation functions to allow other code to break to default.
- fix indentation in switch statement
Changes from RFC:
Geert Uytterhoeven;
- drop setup_mm.c patch
Finn Thain:
- Add 'Fixes' tag
- Annotate rationale for MULTI_ISA setting on Atari
- Use fallthrough macro annotation in Atari address translation
---
arch/m68k/include/asm/io_mm.h | 66 +++++++++++++++++++++++++++----------------
1 file changed, 41 insertions(+), 25 deletions(-)
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index d41fa48..6eae9ec 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -52,7 +52,11 @@
#define Q40_ISA_MEM_B(madr) (q40_isa_mem_base+1+4*((unsigned long)(madr)))
#define Q40_ISA_MEM_W(madr) (q40_isa_mem_base+ 4*((unsigned long)(madr)))
+#ifdef CONFIG_ATARI
+#define MULTI_ISA 1 /* Need MULTI_ISA if Atari drivers (IDE) present !! */
+#else
#define MULTI_ISA 0
+#endif /* Atari */
#endif /* Q40 */
#ifdef CONFIG_AMIGA_PCMCIA
@@ -135,10 +139,13 @@ static inline u8 __iomem *isa_itb(unsigned long addr)
case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
#endif
#ifdef CONFIG_ATARI_ROM_ISA
- case ISA_TYPE_ENEC: return (u8 __iomem *)ENEC_ISA_IO_B(addr);
+ case ISA_TYPE_ENEC:
+ if (addr < 1024)
+ return (u8 __iomem *)ENEC_ISA_IO_B(addr);
+ break; /* not ROM port? fallback below! */
#endif
- default: return NULL; /* avoid warnings, just in case */
}
+ return (u8 __iomem *)(addr); /* avoid warnings, just in case */
}
static inline u16 __iomem *isa_itw(unsigned long addr)
{
@@ -151,10 +158,13 @@ static inline u16 __iomem *isa_itw(unsigned long addr)
case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
#endif
#ifdef CONFIG_ATARI_ROM_ISA
- case ISA_TYPE_ENEC: return (u16 __iomem *)ENEC_ISA_IO_W(addr);
+ case ISA_TYPE_ENEC:
+ if (addr < 1024)
+ return (u16 __iomem *)ENEC_ISA_IO_W(addr);
+ break; /* not ROM port? fallback below! */
#endif
- default: return NULL; /* avoid warnings, just in case */
}
+ return (u16 __iomem *)(addr); /* avoid warnings, just in case */
}
static inline u32 __iomem *isa_itl(unsigned long addr)
{
@@ -163,8 +173,8 @@ static inline u32 __iomem *isa_itl(unsigned long addr)
#ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
#endif
- default: return 0; /* avoid warnings, just in case */
}
+ return 0; /* avoid warnings, just in case */
}
static inline u8 __iomem *isa_mtb(unsigned long addr)
{
@@ -177,10 +187,13 @@ static inline u8 __iomem *isa_mtb(unsigned long addr)
case ISA_TYPE_AG: return (u8 __iomem *)addr;
#endif
#ifdef CONFIG_ATARI_ROM_ISA
- case ISA_TYPE_ENEC: return (u8 __iomem *)ENEC_ISA_MEM_B(addr);
+ case ISA_TYPE_ENEC:
+ if (addr < 1024)
+ return (u8 __iomem *)ENEC_ISA_MEM_B(addr);
+ break; /* not ROM port? fallback below! */
#endif
- default: return NULL; /* avoid warnings, just in case */
}
+ return (u8 __iomem *)(addr); /* avoid warnings, just in case */
}
static inline u16 __iomem *isa_mtw(unsigned long addr)
{
@@ -193,10 +206,13 @@ static inline u16 __iomem *isa_mtw(unsigned long addr)
case ISA_TYPE_AG: return (u16 __iomem *)addr;
#endif
#ifdef CONFIG_ATARI_ROM_ISA
- case ISA_TYPE_ENEC: return (u16 __iomem *)ENEC_ISA_MEM_W(addr);
+ case ISA_TYPE_ENEC:
+ if (addr < 1024)
+ return (u16 __iomem *)ENEC_ISA_MEM_W(addr);
+ break; /* not ROM port? fallback below! */
#endif
- default: return NULL; /* avoid warnings, just in case */
}
+ return (u16 __iomem *)(addr); /* avoid warnings, just in case */
}
@@ -344,31 +360,31 @@ static inline void isa_delay(void)
* ROM port ISA and everything else regular ISA for IDE. read,write defined
* below.
*/
-#define inb(port) ((port) < 1024 ? isa_rom_inb(port) : in_8(port))
-#define inb_p(port) ((port) < 1024 ? isa_rom_inb_p(port) : in_8(port))
-#define inw(port) ((port) < 1024 ? isa_rom_inw(port) : in_le16(port))
-#define inw_p(port) ((port) < 1024 ? isa_rom_inw_p(port) : in_le16(port))
+#define inb(port) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_inb(port) : isa_inb(port))
+#define inb_p(port) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_inb_p(port) : isa_inb_p(port))
+#define inw(port) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_inw(port) : isa_inw(port))
+#define inw_p(port) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_inw_p(port) : isa_inw_p(port))
#define inl isa_inl
#define inl_p isa_inl_p
-#define outb(val, port) ((port) < 1024 ? isa_rom_outb((val), (port)) : out_8((port), (val)))
-#define outb_p(val, port) ((port) < 1024 ? isa_rom_outb_p((val), (port)) : out_8((port), (val)))
-#define outw(val, port) ((port) < 1024 ? isa_rom_outw((val), (port)) : out_le16((port), (val)))
-#define outw_p(val, port) ((port) < 1024 ? isa_rom_outw_p((val), (port)) : out_le16((port), (val)))
+#define outb(val, port) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_outb((val), (port)) : isa_outb((val), (port)))
+#define outb_p(val, port) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_outb_p((val), (port)) : isa_outb_p((val), (port)))
+#define outw(val, port) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_outw((val), (port)) : isa_outw((val), (port)))
+#define outw_p(val, port) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_outw_p((val), (port)) : isa_outw_p((val), (port)))
#define outl isa_outl
#define outl_p isa_outl_p
-#define insb(port, buf, nr) ((port) < 1024 ? isa_rom_insb((port), (buf), (nr)) : isa_insb((port), (buf), (nr)))
-#define insw(port, buf, nr) ((port) < 1024 ? isa_rom_insw((port), (buf), (nr)) : isa_insw((port), (buf), (nr)))
+#define insb(port, buf, nr) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_insb((port), (buf), (nr)) : isa_insb((port), (buf), (nr)))
+#define insw(port, buf, nr) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_insw((port), (buf), (nr)) : isa_insw((port), (buf), (nr)))
#define insl isa_insl
-#define outsb(port, buf, nr) ((port) < 1024 ? isa_rom_outsb((port), (buf), (nr)) : isa_outsb((port), (buf), (nr)))
-#define outsw(port, buf, nr) ((port) < 1024 ? isa_rom_outsw((port), (buf), (nr)) : isa_outsw((port), (buf), (nr)))
+#define outsb(port, buf, nr) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_outsb((port), (buf), (nr)) : isa_outsb((port), (buf), (nr)))
+#define outsw(port, buf, nr) (((port) < 1024 && ISA_TYPE == ISA_TYPE_ENEC) ? isa_rom_outsw((port), (buf), (nr)) : isa_outsw((port), (buf), (nr)))
#define outsl isa_outsl
-#define readb(addr) in_8(addr)
-#define writeb(val, addr) out_8((addr), (val))
-#define readw(addr) in_le16(addr)
-#define writew(val, addr) out_le16((addr), (val))
+#define readb isa_readb
+#define readw isa_readw
+#define writeb isa_writeb
+#define writew isa_writew
#endif /* CONFIG_ATARI_ROM_ISA */
#define readl(addr) in_le32(addr)
--
2.7.4
next prev parent reply other threads:[~2021-06-09 7:22 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CAMuHMdUskb3oicq8Kbf6MY_4mn4-Y1pJ-om4fny7k48gndscgg@mail.gmail.com>
2021-06-02 5:21 ` [PATCH RFC 0/2] Fix m68k multiplatform ISA support Michael Schmitz
2021-06-02 5:21 ` [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari Michael Schmitz
2021-06-03 8:23 ` Finn Thain
2021-06-04 0:19 ` Michael Schmitz
2021-06-04 5:55 ` Finn Thain
2021-06-04 7:30 ` Michael Schmitz
2021-06-04 22:49 ` Brad Boyer
2021-06-05 1:41 ` Michael Schmitz
2021-06-05 6:04 ` Brad Boyer
2021-06-05 22:05 ` Michael Schmitz
2021-06-06 2:18 ` Michael Schmitz
2021-06-06 4:53 ` Finn Thain
2021-06-06 5:42 ` Michael Schmitz
2021-06-06 23:51 ` Brad Boyer
2021-06-06 5:54 ` [PATCH RFC 0/2] Add APNE PCMCIA 100 Mbit support Michael Schmitz
2021-06-06 5:54 ` [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support Michael Schmitz
2021-06-07 8:01 ` Geert Uytterhoeven
2021-06-07 8:20 ` Michael Schmitz
2021-06-07 11:15 ` Geert Uytterhoeven
2021-06-07 19:57 ` Michael Schmitz
2021-06-08 6:42 ` Geert Uytterhoeven
2021-06-08 21:55 ` Michael Schmitz
2021-06-09 6:33 ` Geert Uytterhoeven
2021-06-08 21:56 ` Michael Schmitz
2021-06-06 5:54 ` [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver Michael Schmitz
2021-06-07 8:08 ` Geert Uytterhoeven
2021-06-07 8:40 ` Michael Schmitz
2021-06-07 8:46 ` ALeX Kazik
2021-06-08 3:10 ` Michael Schmitz
2021-06-07 8:37 ` Geert Uytterhoeven
2021-06-07 12:56 ` Geert Uytterhoeven
2021-06-09 7:36 ` [PATCH v1 0/2] Add APNE PCMCIA 100 Mbit support Michael Schmitz
2021-06-09 7:36 ` [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support Michael Schmitz
2021-06-09 8:04 ` Andreas Schwab
2021-06-09 21:54 ` Michael Schmitz
2021-06-10 1:09 ` Finn Thain
2021-06-10 7:32 ` Geert Uytterhoeven
2021-06-11 2:15 ` Michael Schmitz
2021-06-10 8:53 ` Andreas Schwab
2021-06-09 7:36 ` [PATCH v1 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver Michael Schmitz
2021-06-10 2:09 ` [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support Michael Schmitz
2021-06-10 2:09 ` [PATCH v2 1/2] m68k: io_mm.h - add APNE 100 MBit support Michael Schmitz
2021-06-10 2:09 ` [PATCH v2 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver Michael Schmitz
2021-06-16 21:11 ` [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support ALeX Kazik
2021-06-17 1:10 ` Michael Schmitz
2021-06-04 7:54 ` [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari Geert Uytterhoeven
2021-06-04 21:36 ` Michael Schmitz
2021-06-04 23:31 ` Finn Thain
2021-06-05 0:24 ` Finn Thain
2021-06-05 3:48 ` Michael Schmitz
2021-06-09 6:35 ` Geert Uytterhoeven
2021-06-09 7:20 ` Michael Schmitz
2021-06-02 5:21 ` [PATCH RFC 2/2] m68k: setup_mm.c: set isa_sex for Atari if ATARI_ROM_ISA not used Michael Schmitz
2021-06-02 7:09 ` Geert Uytterhoeven
2021-06-02 8:21 ` Michael Schmitz
2021-06-03 8:29 ` Finn Thain
2021-06-04 3:02 ` Michael Schmitz
2021-06-06 5:28 ` [PATCH] m68k: Fix multiplatform ISA support Michael Schmitz
2021-06-07 7:49 ` Geert Uytterhoeven
2021-06-07 8:17 ` Michael Schmitz
2021-06-09 7:22 ` Michael Schmitz [this message]
2021-06-09 7:57 ` [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari Andreas Schwab
2021-06-09 21:43 ` Michael Schmitz
2021-06-10 2:04 ` [PATCH v3] " Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1623223322-4242-1-git-send-email-schmitzmic@gmail.com \
--to=schmitzmic@gmail.com \
--cc=fthain@linux-m68k.org \
--cc=geert@linux-m68k.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).