From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: Michael Schmitz <schmitzmic@gmail.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Christoph Hellwig <hch@lst.de>,
linux-ide@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com
Subject: [PATCH v2 17/26] ata: move *sata_set_spd*() to libata-sata.c
Date: Fri, 7 Feb 2020 15:27:25 +0100 [thread overview]
Message-ID: <20200207142734.8431-18-b.zolnierkie@samsung.com> (raw)
In-Reply-To: <20200207142734.8431-1-b.zolnierkie@samsung.com>
* move *sata_set_spd*() to libata-sata.c
* add static inlines for CONFIG_SATA_HOST=n case
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
32842 572 40 33458 82ae drivers/ata/libata-core.o
after:
32812 572 40 33428 8290 drivers/ata/libata-core.o
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/ata/libata-core.c | 81 ---------------------------------------
drivers/ata/libata-sata.c | 81 +++++++++++++++++++++++++++++++++++++++
drivers/ata/libata.h | 7 ++++
include/linux/libata.h | 3 +-
4 files changed, 90 insertions(+), 82 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f2882d1c731b..e932d11a061f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3050,87 +3050,6 @@ int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
return 0;
}
-static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
-{
- struct ata_link *host_link = &link->ap->link;
- u32 limit, target, spd;
-
- limit = link->sata_spd_limit;
-
- /* Don't configure downstream link faster than upstream link.
- * It doesn't speed up anything and some PMPs choke on such
- * configuration.
- */
- if (!ata_is_host_link(link) && host_link->sata_spd)
- limit &= (1 << host_link->sata_spd) - 1;
-
- if (limit == UINT_MAX)
- target = 0;
- else
- target = fls(limit);
-
- spd = (*scontrol >> 4) & 0xf;
- *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
-
- return spd != target;
-}
-
-/**
- * sata_set_spd_needed - is SATA spd configuration needed
- * @link: Link in question
- *
- * Test whether the spd limit in SControl matches
- * @link->sata_spd_limit. This function is used to determine
- * whether hardreset is necessary to apply SATA spd
- * configuration.
- *
- * LOCKING:
- * Inherited from caller.
- *
- * RETURNS:
- * 1 if SATA spd configuration is needed, 0 otherwise.
- */
-static int sata_set_spd_needed(struct ata_link *link)
-{
- u32 scontrol;
-
- if (sata_scr_read(link, SCR_CONTROL, &scontrol))
- return 1;
-
- return __sata_set_spd_needed(link, &scontrol);
-}
-
-/**
- * sata_set_spd - set SATA spd according to spd limit
- * @link: Link to set SATA spd for
- *
- * Set SATA spd of @link according to sata_spd_limit.
- *
- * LOCKING:
- * Inherited from caller.
- *
- * RETURNS:
- * 0 if spd doesn't need to be changed, 1 if spd has been
- * changed. Negative errno if SCR registers are inaccessible.
- */
-int sata_set_spd(struct ata_link *link)
-{
- u32 scontrol;
- int rc;
-
- if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
- return rc;
-
- if (!__sata_set_spd_needed(link, &scontrol))
- return 0;
-
- if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
- return rc;
-
- return 1;
-}
-EXPORT_SYMBOL_GPL(sata_set_spd);
-
#ifdef CONFIG_ATA_ACPI
/**
* ata_timing_cycle2mode - find xfer mode for the specified cycle duration
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 1ef4c19864ac..d66afdc33d54 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -271,6 +271,87 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
}
EXPORT_SYMBOL_GPL(sata_link_scr_lpm);
+static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
+{
+ struct ata_link *host_link = &link->ap->link;
+ u32 limit, target, spd;
+
+ limit = link->sata_spd_limit;
+
+ /* Don't configure downstream link faster than upstream link.
+ * It doesn't speed up anything and some PMPs choke on such
+ * configuration.
+ */
+ if (!ata_is_host_link(link) && host_link->sata_spd)
+ limit &= (1 << host_link->sata_spd) - 1;
+
+ if (limit == UINT_MAX)
+ target = 0;
+ else
+ target = fls(limit);
+
+ spd = (*scontrol >> 4) & 0xf;
+ *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
+
+ return spd != target;
+}
+
+/**
+ * sata_set_spd_needed - is SATA spd configuration needed
+ * @link: Link in question
+ *
+ * Test whether the spd limit in SControl matches
+ * @link->sata_spd_limit. This function is used to determine
+ * whether hardreset is necessary to apply SATA spd
+ * configuration.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * 1 if SATA spd configuration is needed, 0 otherwise.
+ */
+int sata_set_spd_needed(struct ata_link *link)
+{
+ u32 scontrol;
+
+ if (sata_scr_read(link, SCR_CONTROL, &scontrol))
+ return 1;
+
+ return __sata_set_spd_needed(link, &scontrol);
+}
+
+/**
+ * sata_set_spd - set SATA spd according to spd limit
+ * @link: Link to set SATA spd for
+ *
+ * Set SATA spd of @link according to sata_spd_limit.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * 0 if spd doesn't need to be changed, 1 if spd has been
+ * changed. Negative errno if SCR registers are inaccessible.
+ */
+int sata_set_spd(struct ata_link *link)
+{
+ u32 scontrol;
+ int rc;
+
+ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+ return rc;
+
+ if (!__sata_set_spd_needed(link, &scontrol))
+ return 0;
+
+ if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+ return rc;
+
+ return 1;
+}
+EXPORT_SYMBOL_GPL(sata_set_spd);
+
/**
* ata_slave_link_init - initialize slave link
* @ap: port to initialize slave link for
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index cd8090ad43e5..53b45ebe3d55 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -87,6 +87,13 @@ extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
#define to_ata_port(d) container_of(d, struct ata_port, tdev)
+/* libata-sata.c */
+#ifdef CONFIG_SATA_HOST
+int sata_set_spd_needed(struct ata_link *link);
+#else
+static inline int sata_set_spd_needed(struct ata_link *link) { return 1; }
+#endif
+
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
extern unsigned int ata_acpi_gtf_filter;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 57c5081eb601..efc87613f9c1 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1076,7 +1076,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
return ap->ops == &ata_dummy_port_ops;
}
-extern int sata_set_spd(struct ata_link *link);
extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link));
@@ -1196,6 +1195,7 @@ extern int sata_scr_valid(struct ata_link *link);
extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
+extern int sata_set_spd(struct ata_link *link);
#else
static inline int sata_scr_valid(struct ata_link *link) { return 0; }
static inline int sata_scr_read(struct ata_link *link, int reg, u32 *val)
@@ -1210,6 +1210,7 @@ static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
{
return -EOPNOTSUPP;
}
+static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; }
#endif
extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
bool spm_wakeup);
--
2.24.1
next prev parent reply other threads:[~2020-02-07 14:28 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200207142751eucas1p2499d9a7ebbca93fff43c47629ba8b6ce@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 00/26] ata: optimize core code size on PATA only setups Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142751eucas1p19960870c4d79815b9e81747399ef77a2@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 01/26] ata: remove stale maintainership information from core code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142752eucas1p14ad96c1adf7508226cfdfa583bb442aa@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 02/26] ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142752eucas1p27f8e7638e088b45de413dbaf83ce5471@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 03/26] ata: make SATA_PMP option selectable only if any SATA host driver is enabled Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142753eucas1p2c4310ddbb52c5eed02974fc2738c8a58@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 04/26] sata_promise: use ata_cable_sata() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142753eucas1p14a54d1ac2335ec3e9ad66eb6b299fd76@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 05/26] ata: simplify ata_scsiop_inq_89() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142754eucas1p1e7f756105a9187d394ad70d5d91aaa3b@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 06/26] ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142754eucas1p14ee8569d843c7aa03f8a3cfb7dd50056@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 07/26] ata: optimize struct ata_force_param size Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142755eucas1p2a448f8578421c0ac13ff5c47efa8a83f@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 08/26] ata: move EXPORT_SYMBOL_GPL()s close to exported code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142755eucas1p2a47ef991c23f3b05baf24e00afb94c92@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 09/26] ata: remove EXPORT_SYMBOL_GPL()s not used by modules Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142756eucas1p14021b9f9dac98434feeb5ba094b8a8c3@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 10/26] ata: fix CodingStyle issues in PATA timings code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142756eucas1p1f299ae31569762e100756213d11ec87c@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 11/26] ata: separate PATA timings code from libata-core.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142757eucas1p2a6a0f4dfb8cee5313e4a8b4b6214858f@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 12/26] ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142757eucas1p29eda5a5ab29dc59ea88eb2b9770bc71e@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 13/26] ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142758eucas1p2940a7416adac1db3cf63e284ebc23d03@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 14/26] ata: let compiler optimize out ata_eh_set_lpm() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142758eucas1p1796149e416642f812735bd0e537ddb42@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 15/26] ata: start separating SATA specific code from libata-core.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142759eucas1p1205ee995145f1a1e4990a4bdbf14b6d5@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 16/26] ata: move sata_scr_*() to libata-sata.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142759eucas1p1121be90ddd41b97b9112b8cd599d0243@eucas1p1.samsung.com>
2020-02-07 14:27 ` Bartlomiej Zolnierkiewicz [this message]
[not found] ` <CGME20200207142800eucas1p2714a5e9b2ff1a6f7f714f153846d8b51@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 18/26] ata: move sata_link_{debounce,resume}() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142800eucas1p197819409e445b948ba8cacc8acdbf5f9@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 19/26] ata: move sata_link_hardreset() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142801eucas1p27ac052c180ec3adab13543d1c0817a05@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 20/26] ata: move ata_qc_complete_multiple() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142801eucas1p1b7ef2c914af9abfb409917facae0ceb4@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 21/26] ata: move sata_deb_timing_*() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142802eucas1p2ed590d748e1c787c9c7cebdc27f0c49c@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 22/26] ata: start separating SATA specific code from libata-scsi.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142802eucas1p29a42ddad0e551a2f2f4e20626d929261@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 23/26] ata: move ata_sas_*() to libata-sata.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142803eucas1p2625a00402342b1279344ec2ab6d4db5b@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 24/26] ata: start separating SATA specific code from libata-eh.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142803eucas1p1a2ee17261878ae26f9b388f693d6e56a@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 25/26] ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142804eucas1p109106a07c632440423b850168f26f7d8@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 26/26] ata: make "libata.force" kernel parameter optional Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200207142734.8431-18-b.zolnierkie@samsung.com \
--to=b.zolnierkie@samsung.com \
--cc=axboe@kernel.dk \
--cc=geert@linux-m68k.org \
--cc=hch@lst.de \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).