From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: Michael Schmitz <schmitzmic@gmail.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Christoph Hellwig <hch@lst.de>,
linux-ide@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com
Subject: [PATCH v2 19/26] ata: move sata_link_hardreset() to libata-sata.c
Date: Fri, 7 Feb 2020 15:27:27 +0100 [thread overview]
Message-ID: <20200207142734.8431-20-b.zolnierkie@samsung.com> (raw)
In-Reply-To: <20200207142734.8431-1-b.zolnierkie@samsung.com>
* move sata_link_hardreset() to libata-sata.c
* add static inline for CONFIG_SATA_HOST=n case
* make sata_set_spd_needed() static
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
32724 572 40 33336 8238 drivers/ata/libata-core.o
after:
32559 572 40 33171 8193 drivers/ata/libata-core.o
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/ata/libata-core.c | 113 -------------------------------------
drivers/ata/libata-sata.c | 115 +++++++++++++++++++++++++++++++++++++-
drivers/ata/libata.h | 7 ---
include/linux/libata.h | 16 +++++-
4 files changed, 127 insertions(+), 124 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f3391e66b694..cd0febf26dd5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3531,119 +3531,6 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
}
EXPORT_SYMBOL_GPL(ata_std_prereset);
-/**
- * sata_link_hardreset - reset link via SATA phy reset
- * @link: link to reset
- * @timing: timing parameters { interval, duration, timeout } in msec
- * @deadline: deadline jiffies for the operation
- * @online: optional out parameter indicating link onlineness
- * @check_ready: optional callback to check link readiness
- *
- * SATA phy-reset @link using DET bits of SControl register.
- * After hardreset, link readiness is waited upon using
- * ata_wait_ready() if @check_ready is specified. LLDs are
- * allowed to not specify @check_ready and wait itself after this
- * function returns. Device classification is LLD's
- * responsibility.
- *
- * *@online is set to one iff reset succeeded and @link is online
- * after reset.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
- unsigned long deadline,
- bool *online, int (*check_ready)(struct ata_link *))
-{
- u32 scontrol;
- int rc;
-
- DPRINTK("ENTER\n");
-
- if (online)
- *online = false;
-
- if (sata_set_spd_needed(link)) {
- /* SATA spec says nothing about how to reconfigure
- * spd. To be on the safe side, turn off phy during
- * reconfiguration. This works for at least ICH7 AHCI
- * and Sil3124.
- */
- if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
- goto out;
-
- scontrol = (scontrol & 0x0f0) | 0x304;
-
- if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
- goto out;
-
- sata_set_spd(link);
- }
-
- /* issue phy wake/reset */
- if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
- goto out;
-
- scontrol = (scontrol & 0x0f0) | 0x301;
-
- if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol)))
- goto out;
-
- /* Couldn't find anything in SATA I/II specs, but AHCI-1.1
- * 10.4.2 says at least 1 ms.
- */
- ata_msleep(link->ap, 1);
-
- /* bring link back */
- rc = sata_link_resume(link, timing, deadline);
- if (rc)
- goto out;
- /* if link is offline nothing more to do */
- if (ata_phys_link_offline(link))
- goto out;
-
- /* Link is online. From this point, -ENODEV too is an error. */
- if (online)
- *online = true;
-
- if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
- /* If PMP is supported, we have to do follow-up SRST.
- * Some PMPs don't send D2H Reg FIS after hardreset if
- * the first port is empty. Wait only for
- * ATA_TMOUT_PMP_SRST_WAIT.
- */
- if (check_ready) {
- unsigned long pmp_deadline;
-
- pmp_deadline = ata_deadline(jiffies,
- ATA_TMOUT_PMP_SRST_WAIT);
- if (time_after(pmp_deadline, deadline))
- pmp_deadline = deadline;
- ata_wait_ready(link, pmp_deadline, check_ready);
- }
- rc = -EAGAIN;
- goto out;
- }
-
- rc = 0;
- if (check_ready)
- rc = ata_wait_ready(link, deadline, check_ready);
- out:
- if (rc && rc != -EAGAIN) {
- /* online is set iff link is online && reset succeeded */
- if (online)
- *online = false;
- ata_link_err(link, "COMRESET failed (errno=%d)\n", rc);
- }
- DPRINTK("EXIT, rc=%d\n", rc);
- return rc;
-}
-EXPORT_SYMBOL_GPL(sata_link_hardreset);
-
/**
* sata_std_hardreset - COMRESET w/o waiting or classification
* @link: link to reset
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 34852fced999..05a1872ba329 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -449,7 +449,7 @@ static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
* RETURNS:
* 1 if SATA spd configuration is needed, 0 otherwise.
*/
-int sata_set_spd_needed(struct ata_link *link)
+static int sata_set_spd_needed(struct ata_link *link)
{
u32 scontrol;
@@ -490,6 +490,119 @@ int sata_set_spd(struct ata_link *link)
}
EXPORT_SYMBOL_GPL(sata_set_spd);
+/**
+ * sata_link_hardreset - reset link via SATA phy reset
+ * @link: link to reset
+ * @timing: timing parameters { interval, duration, timeout } in msec
+ * @deadline: deadline jiffies for the operation
+ * @online: optional out parameter indicating link onlineness
+ * @check_ready: optional callback to check link readiness
+ *
+ * SATA phy-reset @link using DET bits of SControl register.
+ * After hardreset, link readiness is waited upon using
+ * ata_wait_ready() if @check_ready is specified. LLDs are
+ * allowed to not specify @check_ready and wait itself after this
+ * function returns. Device classification is LLD's
+ * responsibility.
+ *
+ * *@online is set to one iff reset succeeded and @link is online
+ * after reset.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
+ unsigned long deadline,
+ bool *online, int (*check_ready)(struct ata_link *))
+{
+ u32 scontrol;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ if (online)
+ *online = false;
+
+ if (sata_set_spd_needed(link)) {
+ /* SATA spec says nothing about how to reconfigure
+ * spd. To be on the safe side, turn off phy during
+ * reconfiguration. This works for at least ICH7 AHCI
+ * and Sil3124.
+ */
+ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+ goto out;
+
+ scontrol = (scontrol & 0x0f0) | 0x304;
+
+ if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+ goto out;
+
+ sata_set_spd(link);
+ }
+
+ /* issue phy wake/reset */
+ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+ goto out;
+
+ scontrol = (scontrol & 0x0f0) | 0x301;
+
+ if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol)))
+ goto out;
+
+ /* Couldn't find anything in SATA I/II specs, but AHCI-1.1
+ * 10.4.2 says at least 1 ms.
+ */
+ ata_msleep(link->ap, 1);
+
+ /* bring link back */
+ rc = sata_link_resume(link, timing, deadline);
+ if (rc)
+ goto out;
+ /* if link is offline nothing more to do */
+ if (ata_phys_link_offline(link))
+ goto out;
+
+ /* Link is online. From this point, -ENODEV too is an error. */
+ if (online)
+ *online = true;
+
+ if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
+ /* If PMP is supported, we have to do follow-up SRST.
+ * Some PMPs don't send D2H Reg FIS after hardreset if
+ * the first port is empty. Wait only for
+ * ATA_TMOUT_PMP_SRST_WAIT.
+ */
+ if (check_ready) {
+ unsigned long pmp_deadline;
+
+ pmp_deadline = ata_deadline(jiffies,
+ ATA_TMOUT_PMP_SRST_WAIT);
+ if (time_after(pmp_deadline, deadline))
+ pmp_deadline = deadline;
+ ata_wait_ready(link, pmp_deadline, check_ready);
+ }
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ rc = 0;
+ if (check_ready)
+ rc = ata_wait_ready(link, deadline, check_ready);
+ out:
+ if (rc && rc != -EAGAIN) {
+ /* online is set iff link is online && reset succeeded */
+ if (online)
+ *online = false;
+ ata_link_err(link, "COMRESET failed (errno=%d)\n", rc);
+ }
+ DPRINTK("EXIT, rc=%d\n", rc);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(sata_link_hardreset);
+
/**
* ata_slave_link_init - initialize slave link
* @ap: port to initialize slave link for
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 53b45ebe3d55..cd8090ad43e5 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -87,13 +87,6 @@ extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
#define to_ata_port(d) container_of(d, struct ata_port, tdev)
-/* libata-sata.c */
-#ifdef CONFIG_SATA_HOST
-int sata_set_spd_needed(struct ata_link *link);
-#else
-static inline int sata_set_spd_needed(struct ata_link *link) { return 1; }
-#endif
-
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
extern unsigned int ata_acpi_gtf_filter;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bd0ac8007911..0c8c3b6eac9f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1079,9 +1079,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link));
-extern int sata_link_hardreset(struct ata_link *link,
- const unsigned long *timing, unsigned long deadline,
- bool *online, int (*check_ready)(struct ata_link *));
extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
@@ -1192,6 +1189,9 @@ extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
extern int sata_set_spd(struct ata_link *link);
+extern int sata_link_hardreset(struct ata_link *link,
+ const unsigned long *timing, unsigned long deadline,
+ bool *online, int (*check_ready)(struct ata_link *));
extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline);
#else
@@ -1209,6 +1209,16 @@ static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
return -EOPNOTSUPP;
}
static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; }
+static inline int sata_link_hardreset(struct ata_link *link,
+ const unsigned long *timing,
+ unsigned long deadline,
+ bool *online,
+ int (*check_ready)(struct ata_link *))
+{
+ if (online)
+ *online = false;
+ return -EOPNOTSUPP;
+}
static inline int sata_link_resume(struct ata_link *link,
const unsigned long *params,
unsigned long deadline)
--
2.24.1
next prev parent reply other threads:[~2020-02-07 14:28 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200207142751eucas1p2499d9a7ebbca93fff43c47629ba8b6ce@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 00/26] ata: optimize core code size on PATA only setups Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142751eucas1p19960870c4d79815b9e81747399ef77a2@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 01/26] ata: remove stale maintainership information from core code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142752eucas1p14ad96c1adf7508226cfdfa583bb442aa@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 02/26] ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142752eucas1p27f8e7638e088b45de413dbaf83ce5471@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 03/26] ata: make SATA_PMP option selectable only if any SATA host driver is enabled Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142753eucas1p2c4310ddbb52c5eed02974fc2738c8a58@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 04/26] sata_promise: use ata_cable_sata() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142753eucas1p14a54d1ac2335ec3e9ad66eb6b299fd76@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 05/26] ata: simplify ata_scsiop_inq_89() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142754eucas1p1e7f756105a9187d394ad70d5d91aaa3b@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 06/26] ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142754eucas1p14ee8569d843c7aa03f8a3cfb7dd50056@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 07/26] ata: optimize struct ata_force_param size Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142755eucas1p2a448f8578421c0ac13ff5c47efa8a83f@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 08/26] ata: move EXPORT_SYMBOL_GPL()s close to exported code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142755eucas1p2a47ef991c23f3b05baf24e00afb94c92@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 09/26] ata: remove EXPORT_SYMBOL_GPL()s not used by modules Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142756eucas1p14021b9f9dac98434feeb5ba094b8a8c3@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 10/26] ata: fix CodingStyle issues in PATA timings code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142756eucas1p1f299ae31569762e100756213d11ec87c@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 11/26] ata: separate PATA timings code from libata-core.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142757eucas1p2a6a0f4dfb8cee5313e4a8b4b6214858f@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 12/26] ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142757eucas1p29eda5a5ab29dc59ea88eb2b9770bc71e@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 13/26] ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142758eucas1p2940a7416adac1db3cf63e284ebc23d03@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 14/26] ata: let compiler optimize out ata_eh_set_lpm() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142758eucas1p1796149e416642f812735bd0e537ddb42@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 15/26] ata: start separating SATA specific code from libata-core.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142759eucas1p1205ee995145f1a1e4990a4bdbf14b6d5@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 16/26] ata: move sata_scr_*() to libata-sata.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142759eucas1p1121be90ddd41b97b9112b8cd599d0243@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 17/26] ata: move *sata_set_spd*() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142800eucas1p2714a5e9b2ff1a6f7f714f153846d8b51@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 18/26] ata: move sata_link_{debounce,resume}() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142800eucas1p197819409e445b948ba8cacc8acdbf5f9@eucas1p1.samsung.com>
2020-02-07 14:27 ` Bartlomiej Zolnierkiewicz [this message]
[not found] ` <CGME20200207142801eucas1p27ac052c180ec3adab13543d1c0817a05@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 20/26] ata: move ata_qc_complete_multiple() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142801eucas1p1b7ef2c914af9abfb409917facae0ceb4@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 21/26] ata: move sata_deb_timing_*() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142802eucas1p2ed590d748e1c787c9c7cebdc27f0c49c@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 22/26] ata: start separating SATA specific code from libata-scsi.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142802eucas1p29a42ddad0e551a2f2f4e20626d929261@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 23/26] ata: move ata_sas_*() to libata-sata.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142803eucas1p2625a00402342b1279344ec2ab6d4db5b@eucas1p2.samsung.com>
2020-02-07 14:27 ` [PATCH v2 24/26] ata: start separating SATA specific code from libata-eh.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142803eucas1p1a2ee17261878ae26f9b388f693d6e56a@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 25/26] ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200207142804eucas1p109106a07c632440423b850168f26f7d8@eucas1p1.samsung.com>
2020-02-07 14:27 ` [PATCH v2 26/26] ata: make "libata.force" kernel parameter optional Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200207142734.8431-20-b.zolnierkie@samsung.com \
--to=b.zolnierkie@samsung.com \
--cc=axboe@kernel.dk \
--cc=geert@linux-m68k.org \
--cc=hch@lst.de \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).