linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: martin.petersen@oracle.com
Cc: brking@us.ibm.com, jinpu.wang@cloud.ionos.com,
	John Garry <john.garry@huawei.com>,
	mpe@ellerman.id.au, linux-scsi@vger.kernel.org,
	linux-ide@vger.kernel.org
Subject: [PATCH 2/2] scsi: wire up ata_scsi_dma_need_drain for SAS HBA drivers
Date: Mon, 15 Jun 2020 08:46:24 +0200	[thread overview]
Message-ID: <20200615064624.37317-3-hch@lst.de> (raw)
In-Reply-To: <20200615064624.37317-1-hch@lst.de>

We need ata_scsi_dma_need_drain for all drivers wired up to drive ATAPI
devices through libata.  That also includes the SAS HBA drivers in
addition to native libata HBA drivers.

Fixes: cc97923a5bcc ("block: move dma drain handling to scsi")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Acked-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/aic94xx/aic94xx_init.c    | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
 drivers/scsi/ipr.c                     | 1 +
 drivers/scsi/isci/init.c               | 1 +
 drivers/scsi/mvsas/mv_init.c           | 1 +
 drivers/scsi/pm8001/pm8001_init.c      | 1 +
 8 files changed, 8 insertions(+)

diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index d022407e5645c7..bef47f38dd0dbc 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -40,6 +40,7 @@ static struct scsi_host_template aic94xx_sht = {
 	/* .name is initialized */
 	.name			= "aic94xx",
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= sas_slave_configure,
 	.scan_finished		= asd_scan_finished,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 2e1718f9ade218..09a7669dad4c67 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1756,6 +1756,7 @@ static struct scsi_host_template sht_v1_hw = {
 	.proc_name		= DRV_NAME,
 	.module			= THIS_MODULE,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= hisi_sas_slave_configure,
 	.scan_finished		= hisi_sas_scan_finished,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e7e7849a4c14e2..968d3870235359 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3532,6 +3532,7 @@ static struct scsi_host_template sht_v2_hw = {
 	.proc_name		= DRV_NAME,
 	.module			= THIS_MODULE,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= hisi_sas_slave_configure,
 	.scan_finished		= hisi_sas_scan_finished,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 3e6b78a1f993b9..55e2321a65bc5f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3075,6 +3075,7 @@ static struct scsi_host_template sht_v3_hw = {
 	.proc_name		= DRV_NAME,
 	.module			= THIS_MODULE,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= hisi_sas_slave_configure,
 	.scan_finished		= hisi_sas_scan_finished,
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 7d77997d26d457..7d86f4ca266c86 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6731,6 +6731,7 @@ static struct scsi_host_template driver_template = {
 	.compat_ioctl = ipr_ioctl,
 #endif
 	.queuecommand = ipr_queuecommand,
+	.dma_need_drain = ata_scsi_dma_need_drain,
 	.eh_abort_handler = ipr_eh_abort,
 	.eh_device_reset_handler = ipr_eh_dev_reset,
 	.eh_host_reset_handler = ipr_eh_host_reset,
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 974c3b9116d5ba..085e285f427d93 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -153,6 +153,7 @@ static struct scsi_host_template isci_sht = {
 	.name				= DRV_NAME,
 	.proc_name			= DRV_NAME,
 	.queuecommand			= sas_queuecommand,
+	.dma_need_drain			= ata_scsi_dma_need_drain,
 	.target_alloc			= sas_target_alloc,
 	.slave_configure		= sas_slave_configure,
 	.scan_finished			= isci_host_scan_finished,
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 5973eed9493820..b0de3bdb01db06 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -33,6 +33,7 @@ static struct scsi_host_template mvs_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= sas_slave_configure,
 	.scan_finished		= mvs_scan_finished,
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index a8f5344fdfda2a..9e99262a2b9dd3 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -87,6 +87,7 @@ static struct scsi_host_template pm8001_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= sas_slave_configure,
 	.scan_finished		= pm8001_scan_finished,
-- 
2.26.2


  parent reply	other threads:[~2020-06-15  6:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-15  6:46 fix ATAPI support for libsas drivers Christoph Hellwig
2020-06-15  6:46 ` [PATCH 1/2] libata: provide a ata_scsi_dma_need_drain stub for !CONFIG_ATA Christoph Hellwig
2020-06-16  3:46   ` Martin K. Petersen
2020-06-15  6:46 ` Christoph Hellwig [this message]
2020-06-18  9:02 ` fix ATAPI support for libsas drivers John Garry
2020-06-18 15:28   ` Christoph Hellwig
2020-06-22  6:28     ` Hannes Reinecke
2020-06-23 11:44       ` John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200615064624.37317-3-hch@lst.de \
    --to=hch@lst.de \
    --cc=brking@us.ibm.com \
    --cc=jinpu.wang@cloud.ionos.com \
    --cc=john.garry@huawei.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=mpe@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).