* [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups
@ 2023-02-14 22:59 Ondrej Zary
2023-02-14 22:59 ` [PATCH 01/18] pata_parport: fix EPAT C7/C8 Kconfig Ondrej Zary
` (18 more replies)
0 siblings, 19 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 22:59 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
This patch series fixes two bugs and cleans up pata_parport protocol drivers,
making the code simpler with no changes in behavior (except logged messages).
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
Changes in v2:
- added two bugfixes (first two patches)
- addressed Sergey's comments (mostly split patches)
drivers/ata/pata_parport/aten.c | 45 ++++----------
drivers/ata/pata_parport/bpck.c | 86 ++++++++------------------
drivers/ata/pata_parport/bpck6.c | 107 ++++++++-------------------------
drivers/ata/pata_parport/comm.c | 52 +++++-----------
drivers/ata/pata_parport/dstr.c | 45 ++++----------
drivers/ata/pata_parport/epat.c | 48 ++++++---------
drivers/ata/pata_parport/epia.c | 55 +++++------------
drivers/ata/pata_parport/fit2.c | 37 ++++--------
drivers/ata/pata_parport/fit3.c | 39 ++++--------
drivers/ata/pata_parport/friq.c | 56 ++++++-----------
drivers/ata/pata_parport/frpw.c | 71 ++++++----------------
drivers/ata/pata_parport/kbic.c | 66 +++++++++-----------
drivers/ata/pata_parport/ktti.c | 38 ++++--------
drivers/ata/pata_parport/on20.c | 45 ++++----------
drivers/ata/pata_parport/on26.c | 52 ++++------------
drivers/ata/pata_parport/pata_parport.c | 31 +++++-----
{include/linux => drivers/ata/pata_parport}/pata_parport.h | 41 ++++---------
17 files changed, 271 insertions(+), 643 deletions(-)
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 01/18] pata_parport: fix EPAT C7/C8 Kconfig
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
@ 2023-02-14 22:59 ` Ondrej Zary
2023-02-15 17:19 ` Sergey Shtylyov
2023-02-14 22:59 ` [PATCH 02/18] pata_parport: probe all units automatically Ondrej Zary
` (17 subsequent siblings)
18 siblings, 1 reply; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 22:59 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
CONFIG_PARIDE_EPATC8 was renamed to CONFIG_PATA_PARPORT_EPATC8 but
epat.c was not updated to reflect that. Update it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/epat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 6ce2dee7657f..93ee91d9338b 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -324,7 +324,7 @@ static struct pi_protocol epat = {
static int __init epat_init(void)
{
-#ifdef CONFIG_PARIDE_EPATC8
+#ifdef CONFIG_PATA_PARPORT_EPATC8
epatc8 = 1;
#endif
return paride_register(&epat);
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 02/18] pata_parport: probe all units automatically
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
2023-02-14 22:59 ` [PATCH 01/18] pata_parport: fix EPAT C7/C8 Kconfig Ondrej Zary
@ 2023-02-14 22:59 ` Ondrej Zary
2023-02-14 22:59 ` [PATCH 03/18] pata_parport: Remove pi_swab16 and pi_swab32 Ondrej Zary
` (16 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 22:59 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Only unit 0 is probed after registering a protocol driver or attaching
a new parport. This causes bpck and bpck6 devices to be not detected
automatically.
Probe all units just like in manual device creation (using sysfs).
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/pata_parport.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
index 294a266a0dda..49e99c9465fd 100644
--- a/drivers/ata/pata_parport/pata_parport.c
+++ b/drivers/ata/pata_parport/pata_parport.c
@@ -530,7 +530,7 @@ int pata_parport_register_driver(struct pi_protocol *pr)
if (probe) {
/* probe all parports using this protocol */
idr_for_each_entry(&parport_list, parport, port_num)
- pi_init_one(parport, pr, -1, 0, -1);
+ pi_init_one(parport, pr, -1, -1, -1);
}
mutex_unlock(&pi_mutex);
@@ -665,7 +665,7 @@ static void pata_parport_attach(struct parport *port)
if (probe) {
/* probe this port using all protocols */
idr_for_each_entry(&protocols, pr, pr_num)
- pi_init_one(port, pr, -1, 0, -1);
+ pi_init_one(port, pr, -1, -1, -1);
}
mutex_unlock(&pi_mutex);
}
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 03/18] pata_parport: Remove pi_swab16 and pi_swab32
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
2023-02-14 22:59 ` [PATCH 01/18] pata_parport: fix EPAT C7/C8 Kconfig Ondrej Zary
2023-02-14 22:59 ` [PATCH 02/18] pata_parport: probe all units automatically Ondrej Zary
@ 2023-02-14 22:59 ` Ondrej Zary
2023-02-14 22:59 ` [PATCH 04/18] pata_parport: remove useless printks at module_init of bpck6 Ondrej Zary
` (15 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 22:59 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Convert comm and kbic drivers to use standard swab16.
Remove pi_swab16 and pi_swab32.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/comm.c | 7 +++++--
drivers/ata/pata_parport/kbic.c | 7 +++++--
include/linux/pata_parport.h | 17 -----------------
3 files changed, 10 insertions(+), 21 deletions(-)
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 1775e7ed9336..11ed9fb57744 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -165,11 +165,14 @@ static void comm_write_block( PIA *pi, char * buf, int count )
break;
case 3: w3(0x48); (void)r1();
- for (k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
+ for (k = 0; k < count / 2; k++)
+ w4w(swab16(((u16 *)buf)[k]));
break;
case 4: w3(0x48); (void)r1();
- for (k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
+ for (k = 0; k < count / 4; k++)
+ w4l(swab16(((u16 *)buf)[2 * k]) |
+ swab16(((u16 *)buf)[2 * k + 1]) << 16);
break;
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index f0960eb68635..93430ca32a52 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -213,12 +213,15 @@ static void kbic_write_block( PIA *pi, char * buf, int count )
break;
case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
- for(k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
+ for (k = 0; k < count / 2; k++)
+ w4w(swab16(((u16 *)buf)[k]));
w2(4); w2(0); w2(4);
break;
case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
- for(k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
+ for (k = 0; k < count / 4; k++)
+ w4l(swab16(((u16 *)buf)[2 * k]) |
+ swab16(((u16 *)buf)[2 * k + 1]) << 16);
w2(4); w2(0); w2(4);
break;
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index 58781846f282..458544fe5e6c 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -54,23 +54,6 @@ typedef struct pi_adapter PIA; /* for paride protocol modules */
#define r4w() (delay_p, inw(pi->port + 4))
#define r4l() (delay_p, inl(pi->port + 4))
-static inline u16 pi_swab16(char *b, int k)
-{
- union { u16 u; char t[2]; } r;
-
- r.t[0] = b[2 * k + 1]; r.t[1] = b[2 * k];
- return r.u;
-}
-
-static inline u32 pi_swab32(char *b, int k)
-{
- union { u32 u; char f[4]; } r;
-
- r.f[0] = b[4 * k + 1]; r.f[1] = b[4 * k];
- r.f[2] = b[4 * k + 3]; r.f[3] = b[4 * k + 2];
- return r.u;
-}
-
struct pi_protocol {
char name[8];
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 04/18] pata_parport: remove useless printks at module_init of bpck6
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (2 preceding siblings ...)
2023-02-14 22:59 ` [PATCH 03/18] pata_parport: Remove pi_swab16 and pi_swab32 Ondrej Zary
@ 2023-02-14 22:59 ` Ondrej Zary
2023-02-14 22:59 ` [PATCH 05/18] pata_parport: Introduce module_pata_parport_driver macro Ondrej Zary
` (14 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 22:59 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
bpck6 prints some useless messages on module_init. Remove them.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/bpck6.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index d897e2a28efe..3b3a40e48b21 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -247,10 +247,6 @@ static struct pi_protocol bpck6 = {
static int __init bpck6_init(void)
{
- printk(KERN_INFO "bpck6: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n");
- printk(KERN_INFO "bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA\n");
- if(verbose)
- printk(KERN_DEBUG "bpck6: verbose debug enabled.\n");
return paride_register(&bpck6);
}
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 05/18] pata_parport: Introduce module_pata_parport_driver macro
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (3 preceding siblings ...)
2023-02-14 22:59 ` [PATCH 04/18] pata_parport: remove useless printks at module_init of bpck6 Ondrej Zary
@ 2023-02-14 22:59 ` Ondrej Zary
2023-02-14 22:59 ` [PATCH 06/18] pata_parport: remove devtype from struct pi_adapter Ondrej Zary
` (13 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 22:59 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Introduce module_pata_parport_driver macro and use it in protocol
drivers to reduce boilerplate code. Remove paride_(un)register
compatibility defines.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 13 +------------
drivers/ata/pata_parport/bpck.c | 13 +------------
drivers/ata/pata_parport/bpck6.c | 13 +------------
drivers/ata/pata_parport/comm.c | 13 +------------
drivers/ata/pata_parport/dstr.c | 13 +------------
drivers/ata/pata_parport/epat.c | 4 ++--
drivers/ata/pata_parport/epia.c | 13 +------------
drivers/ata/pata_parport/fit2.c | 13 +------------
drivers/ata/pata_parport/fit3.c | 13 +------------
drivers/ata/pata_parport/friq.c | 13 +------------
drivers/ata/pata_parport/frpw.c | 13 +------------
drivers/ata/pata_parport/kbic.c | 10 +++++-----
drivers/ata/pata_parport/ktti.c | 13 +------------
drivers/ata/pata_parport/on20.c | 13 +------------
drivers/ata/pata_parport/on26.c | 13 +------------
include/linux/pata_parport.h | 14 +++++++++++---
16 files changed, 31 insertions(+), 166 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index b66508bedbd0..9e6098f90162 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -147,16 +147,5 @@ static struct pi_protocol aten = {
.log_adapter = aten_log_adapter,
};
-static int __init aten_init(void)
-{
- return paride_register(&aten);
-}
-
-static void __exit aten_exit(void)
-{
- paride_unregister( &aten );
-}
-
MODULE_LICENSE("GPL");
-module_init(aten_init)
-module_exit(aten_exit)
+module_pata_parport_driver(aten);
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 5fb3cf9ba11d..b9174cf8863c 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -462,16 +462,5 @@ static struct pi_protocol bpck = {
.log_adapter = bpck_log_adapter,
};
-static int __init bpck_init(void)
-{
- return paride_register(&bpck);
-}
-
-static void __exit bpck_exit(void)
-{
- paride_unregister(&bpck);
-}
-
MODULE_LICENSE("GPL");
-module_init(bpck_init)
-module_exit(bpck_exit)
+module_pata_parport_driver(bpck);
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 3b3a40e48b21..3c358e66db25 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -245,19 +245,8 @@ static struct pi_protocol bpck6 = {
.release_proto = bpck6_release_proto,
};
-static int __init bpck6_init(void)
-{
- return paride_register(&bpck6);
-}
-
-static void __exit bpck6_exit(void)
-{
- paride_unregister(&bpck6);
-}
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Micro Solutions Inc.");
MODULE_DESCRIPTION("BACKPACK Protocol module, compatible with PARIDE");
module_param(verbose, bool, 0644);
-module_init(bpck6_init)
-module_exit(bpck6_exit)
+module_pata_parport_driver(bpck6);
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 11ed9fb57744..47f0fbccc3aa 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -206,16 +206,5 @@ static struct pi_protocol comm = {
.log_adapter = comm_log_adapter,
};
-static int __init comm_init(void)
-{
- return paride_register(&comm);
-}
-
-static void __exit comm_exit(void)
-{
- paride_unregister(&comm);
-}
-
MODULE_LICENSE("GPL");
-module_init(comm_init)
-module_exit(comm_exit)
+module_pata_parport_driver(comm);
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index edf414d186a6..e733a2512e17 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -218,16 +218,5 @@ static struct pi_protocol dstr = {
.log_adapter = dstr_log_adapter,
};
-static int __init dstr_init(void)
-{
- return paride_register(&dstr);
-}
-
-static void __exit dstr_exit(void)
-{
- paride_unregister(&dstr);
-}
-
MODULE_LICENSE("GPL");
-module_init(dstr_init)
-module_exit(dstr_exit)
+module_pata_parport_driver(dstr);
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 93ee91d9338b..7583d07083a8 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -327,12 +327,12 @@ static int __init epat_init(void)
#ifdef CONFIG_PATA_PARPORT_EPATC8
epatc8 = 1;
#endif
- return paride_register(&epat);
+ return pata_parport_register_driver(&epat);
}
static void __exit epat_exit(void)
{
- paride_unregister(&epat);
+ pata_parport_unregister_driver(&epat);
}
MODULE_LICENSE("GPL");
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 417d5a3c7f72..2bcb18a6845a 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -301,16 +301,5 @@ static struct pi_protocol epia = {
.log_adapter = epia_log_adapter,
};
-static int __init epia_init(void)
-{
- return paride_register(&epia);
-}
-
-static void __exit epia_exit(void)
-{
- paride_unregister(&epia);
-}
-
MODULE_LICENSE("GPL");
-module_init(epia_init)
-module_exit(epia_exit)
+module_pata_parport_driver(epia);
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index 3c7a1069b026..c63f0cd2ea52 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -136,16 +136,5 @@ static struct pi_protocol fit2 = {
.log_adapter = fit2_log_adapter,
};
-static int __init fit2_init(void)
-{
- return paride_register(&fit2);
-}
-
-static void __exit fit2_exit(void)
-{
- paride_unregister(&fit2);
-}
-
MODULE_LICENSE("GPL");
-module_init(fit2_init)
-module_exit(fit2_exit)
+module_pata_parport_driver(fit2);
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index cd95f4f0edc2..adbef142c88f 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -196,16 +196,5 @@ static struct pi_protocol fit3 = {
.log_adapter = fit3_log_adapter,
};
-static int __init fit3_init(void)
-{
- return paride_register(&fit3);
-}
-
-static void __exit fit3_exit(void)
-{
- paride_unregister(&fit3);
-}
-
MODULE_LICENSE("GPL");
-module_init(fit3_init)
-module_exit(fit3_exit)
+module_pata_parport_driver(fit3);
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index da1d0cb016d6..e740fe933e20 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -261,16 +261,5 @@ static struct pi_protocol friq = {
.release_proto = friq_release_proto,
};
-static int __init friq_init(void)
-{
- return paride_register(&friq);
-}
-
-static void __exit friq_exit(void)
-{
- paride_unregister(&friq);
-}
-
MODULE_LICENSE("GPL");
-module_init(friq_init)
-module_exit(friq_exit)
+module_pata_parport_driver(friq);
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 7bc8fa16d5d8..8c8681812bed 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -298,16 +298,5 @@ static struct pi_protocol frpw = {
.log_adapter = frpw_log_adapter,
};
-static int __init frpw_init(void)
-{
- return paride_register(&frpw);
-}
-
-static void __exit frpw_exit(void)
-{
- paride_unregister(&frpw);
-}
-
MODULE_LICENSE("GPL");
-module_init(frpw_init)
-module_exit(frpw_exit)
+module_pata_parport_driver(frpw);
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index 93430ca32a52..b120597043cc 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -288,19 +288,19 @@ static int __init kbic_init(void)
{
int rv;
- rv = paride_register(&k951);
+ rv = pata_parport_register_driver(&k951);
if (rv < 0)
return rv;
- rv = paride_register(&k971);
+ rv = pata_parport_register_driver(&k971);
if (rv < 0)
- paride_unregister(&k951);
+ pata_parport_unregister_driver(&k951);
return rv;
}
static void __exit kbic_exit(void)
{
- paride_unregister(&k951);
- paride_unregister(&k971);
+ pata_parport_unregister_driver(&k951);
+ pata_parport_unregister_driver(&k971);
}
MODULE_LICENSE("GPL");
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index fc4f707fed1f..15463cd18968 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -113,16 +113,5 @@ static struct pi_protocol ktti = {
.log_adapter = ktti_log_adapter,
};
-static int __init ktti_init(void)
-{
- return paride_register(&ktti);
-}
-
-static void __exit ktti_exit(void)
-{
- paride_unregister(&ktti);
-}
-
MODULE_LICENSE("GPL");
-module_init(ktti_init)
-module_exit(ktti_exit)
+module_pata_parport_driver(ktti);
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index 995fc41e3122..f2a601e77842 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -138,16 +138,5 @@ static struct pi_protocol on20 = {
.log_adapter = on20_log_adapter,
};
-static int __init on20_init(void)
-{
- return paride_register(&on20);
-}
-
-static void __exit on20_exit(void)
-{
- paride_unregister(&on20);
-}
-
MODULE_LICENSE("GPL");
-module_init(on20_init)
-module_exit(on20_exit)
+module_pata_parport_driver(on20);
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index 35f1c481a782..66f04015f19a 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -304,16 +304,5 @@ static struct pi_protocol on26 = {
.log_adapter = on26_log_adapter,
};
-static int __init on26_init(void)
-{
- return paride_register(&on26);
-}
-
-static void __exit on26_exit(void)
-{
- paride_unregister(&on26);
-}
-
MODULE_LICENSE("GPL");
-module_init(on26_init)
-module_exit(on26_exit)
+module_pata_parport_driver(on26);
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index 458544fe5e6c..9614ce53470a 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -87,8 +87,16 @@ struct pi_protocol {
int pata_parport_register_driver(struct pi_protocol *pr);
void pata_parport_unregister_driver(struct pi_protocol *pr);
-/* defines for old paride protocol modules */
-#define paride_register pata_parport_register_driver
-#define paride_unregister pata_parport_unregister_driver
+
+/**
+ * module_pata_parport_driver() - Helper macro for registering a pata_parport driver
+ * @__pi_protocol: pi_protocol struct
+ *
+ * Helper macro for pata_parport drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_pata_parport_driver(__pi_protocol) \
+ module_driver(__pi_protocol, pata_parport_register_driver, pata_parport_unregister_driver)
#endif /* LINUX_PATA_PARPORT_H */
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 06/18] pata_parport: remove devtype from struct pi_adapter
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (4 preceding siblings ...)
2023-02-14 22:59 ` [PATCH 05/18] pata_parport: Introduce module_pata_parport_driver macro Ondrej Zary
@ 2023-02-14 22:59 ` Ondrej Zary
2023-02-14 22:59 ` [PATCH 07/18] pata_parport: remove device " Ondrej Zary
` (12 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 22:59 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Only bpck driver uses devtype but it never gets set in pata_parport.
Remove it.
As most bpck devices are CD-ROMs, always run the code that depends
on devtype == PI_PCD.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/bpck.c | 4 ++--
include/linux/pata_parport.h | 3 ---
2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index b9174cf8863c..96386a10c22f 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -241,14 +241,14 @@ static void bpck_connect ( PIA *pi )
WR(5,8);
- if (pi->devtype == PI_PCD) {
+/* if (pi->devtype == PI_PCD) { possibly wrong, purpose unknown */
WR(0x46,0x10); /* fiddle with ESS logic ??? */
WR(0x4c,0x38);
WR(0x4d,0x88);
WR(0x46,0xa0);
WR(0x41,0);
WR(0x4e,8);
- }
+/* }*/
}
static void bpck_disconnect ( PIA *pi )
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index 9614ce53470a..3fc6b002c7c8 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -11,15 +11,12 @@
#include <linux/libata.h>
-#define PI_PCD 1 /* dummy for paride protocol modules */
-
struct pi_adapter {
struct device dev;
struct pi_protocol *proto; /* adapter protocol */
int port; /* base address of parallel port */
int mode; /* transfer mode in use */
int delay; /* adapter delay setting */
- int devtype; /* dummy for paride protocol modules */
char *device; /* dummy for paride protocol modules */
int unit; /* unit number for chained adapters */
int saved_r0; /* saved port state */
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 07/18] pata_parport: remove device from struct pi_adapter
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (5 preceding siblings ...)
2023-02-14 22:59 ` [PATCH 06/18] pata_parport: remove devtype from struct pi_adapter Ondrej Zary
@ 2023-02-14 22:59 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 08/18] pata_parport: remove typedef struct PIA Ondrej Zary
` (11 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 22:59 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
device is never set in pata_parport, remove it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 3 +--
drivers/ata/pata_parport/bpck.c | 12 ++++++------
drivers/ata/pata_parport/bpck6.c | 10 ++++------
drivers/ata/pata_parport/comm.c | 3 +--
drivers/ata/pata_parport/dstr.c | 3 +--
drivers/ata/pata_parport/epat.c | 8 ++++----
drivers/ata/pata_parport/epia.c | 7 +++----
drivers/ata/pata_parport/fit2.c | 5 +++--
drivers/ata/pata_parport/fit3.c | 4 ++--
drivers/ata/pata_parport/friq.c | 6 +++---
drivers/ata/pata_parport/frpw.c | 12 +++++-------
drivers/ata/pata_parport/kbic.c | 3 +--
drivers/ata/pata_parport/ktti.c | 5 +++--
drivers/ata/pata_parport/on20.c | 3 +--
drivers/ata/pata_parport/on26.c | 3 +--
include/linux/pata_parport.h | 1 -
16 files changed, 39 insertions(+), 49 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 9e6098f90162..bf83e4188c23 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -124,8 +124,7 @@ static void aten_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[2] = {"4-bit","8-bit"};
- printk("%s: aten %s, ATEN EH-100 at 0x%x, ",
- pi->device,ATEN_VERSION,pi->port);
+ printk("aten %s, ATEN EH-100 at 0x%x, ", ATEN_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 96386a10c22f..c33ca1cb72ac 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -335,8 +335,8 @@ static int bpck_test_proto( PIA *pi, char * scratch, int verbose )
}
if (verbose) {
- printk("%s: bpck: 0x%x unit %d mode %d: ",
- pi->device,pi->port,pi->unit,pi->mode);
+ printk("bpck: 0x%x unit %d mode %d: ",
+ pi->port, pi->unit, pi->mode);
for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]);
printk("\n");
}
@@ -432,13 +432,13 @@ static void bpck_log_adapter( PIA *pi, char * scratch, int verbose )
for(i=0;i<128;i++)
if ((scratch[i] < ' ') || (scratch[i] > '~'))
scratch[i] = '.';
- printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch);
- printk("%s: %64.64s\n",pi->device,&scratch[64]);
+ printk("bpck EEPROM: %64.64s\n", scratch);
+ printk(" %64.64s\n", &scratch[64]);
}
#endif
- printk("%s: bpck %s, backpack %8.8s unit %d",
- pi->device,BPCK_VERSION,&scratch[110],pi->unit);
+ printk("bpck %s, backpack %8.8s unit %d",
+ BPCK_VERSION, &scratch[110], pi->unit);
printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port,
pi->mode,mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 3c358e66db25..13bfd60655dd 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -200,11 +200,9 @@ static void bpck6_log_adapter( PIA *pi, char * scratch, int verbose )
char *mode_string[5]=
{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- printk("%s: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n",pi->device);
- printk("%s: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.\n",pi->device);
- printk("%s: BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
- pi->device,BACKPACK_VERSION,pi->port);
- printk("%s: Unit: %d Mode:%d (%s) Delay %d\n",pi->device,
+ printk("BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
+ BACKPACK_VERSION, pi->port);
+ printk("Unit: %d Mode:%d (%s) Delay %d\n",
pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
}
@@ -217,7 +215,7 @@ static int bpck6_init_proto(PIA *pi)
return 0;
}
- printk(KERN_ERR "%s: ERROR COULDN'T ALLOCATE MEMORY\n", pi->device);
+ printk(KERN_ERR "ERROR COULDN'T ALLOCATE MEMORY\n");
return -1;
}
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 47f0fbccc3aa..908f6c44548b 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -183,8 +183,7 @@ static void comm_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- printk("%s: comm %s, DataStor Commuter at 0x%x, ",
- pi->device,COMM_VERSION,pi->port);
+ printk("comm %s, DataStor Commuter at 0x%x, ", COMM_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index e733a2512e17..3732e9b79429 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -195,8 +195,7 @@ static void dstr_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- printk("%s: dstr %s, DataStor EP2000 at 0x%x, ",
- pi->device,DSTR_VERSION,pi->port);
+ printk("dstr %s, DataStor EP2000 at 0x%x, ", DSTR_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 7583d07083a8..59720daa9c19 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -280,8 +280,8 @@ static int epat_test_proto( PIA *pi, char * scratch, int verbose )
epat_disconnect(pi);
if (verbose) {
- printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
- pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
+ printk("epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, cc, e[0], e[1], f);
}
return (e[0] && e[1]) || f;
@@ -298,8 +298,8 @@ static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
ver = RR(0xb);
epat_disconnect(pi);
- printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
- pi->device,EPAT_VERSION,ver,pi->port);
+ printk("epat %s, Shuttle EPAT chip %x at 0x%x, ",
+ EPAT_VERSION, ver, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 2bcb18a6845a..610269083441 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -263,8 +263,8 @@ static int epia_test_proto( PIA *pi, char * scratch, int verbose )
epia_disconnect(pi);
if (verbose) {
- printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->device,pi->port,pi->mode,e[0],e[1],f);
+ printk("epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, e[0], e[1], f);
}
return (e[0] && e[1]) || f;
@@ -277,8 +277,7 @@ static void epia_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP-16","EPP-32"};
- printk("%s: epia %s, Shuttle EPIA at 0x%x, ",
- pi->device,EPIA_VERSION,pi->port);
+ printk("epia %s, Shuttle EPIA at 0x%x, ", EPIA_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index c63f0cd2ea52..28de8e4e41c3 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -115,8 +115,9 @@ static void fit2_disconnect ( PIA *pi )
static void fit2_log_adapter( PIA *pi, char * scratch, int verbose )
-{ printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
- pi->device,FIT2_VERSION,pi->port,pi->delay);
+{
+ printk("fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
+ FIT2_VERSION, pi->port, pi->delay);
}
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index adbef142c88f..0366f3123508 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -173,9 +173,9 @@ static void fit3_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
- printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, "
+ printk("fit3 %s, FIT 3000 adapter at 0x%x, "
"mode %d (%s), delay %d\n",
- pi->device,FIT3_VERSION,pi->port,
+ FIT3_VERSION, pi->port,
pi->mode,mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index e740fe933e20..9306a2c78d90 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -208,8 +208,8 @@ static int friq_test_proto( PIA *pi, char * scratch, int verbose )
friq_disconnect(pi);
if (verbose) {
- printk("%s: friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->device,pi->port,pi->mode,e[0],e[1],r);
+ printk("friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, e[0], e[1], r);
}
return (r || (e[0] && e[1]));
@@ -221,7 +221,7 @@ static void friq_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[6] = {"4-bit","8-bit",
"EPP-8","EPP-16","EPP-32"};
- printk("%s: friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ", pi->device,
+ printk("friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ",
FRIQ_VERSION,pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 8c8681812bed..63f2165fec63 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -231,15 +231,13 @@ static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
if (((pi->private%2) == 0) && (pi->mode > 2)) {
if (verbose)
- printk("%s: frpw: Xilinx does not support mode %d\n",
- pi->device, pi->mode);
+ printk("frpw: Xilinx does not support mode %d\n", pi->mode);
return 1;
}
if (((pi->private%2) == 1) && (pi->mode == 2)) {
if (verbose)
- printk("%s: frpw: ASIC does not support mode 2\n",
- pi->device);
+ printk("frpw: ASIC does not support mode 2\n");
return 1;
}
@@ -261,8 +259,8 @@ static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
frpw_disconnect(pi);
if (verbose) {
- printk("%s: frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
- pi->device,pi->port,(pi->private%2),pi->mode,e[0],e[1],r);
+ printk("frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
+ pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
}
return (r || (e[0] && e[1]));
@@ -274,7 +272,7 @@ static void frpw_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
"EPP-8","EPP-16","EPP-32"};
- printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device,
+ printk("frpw %s, Freecom (%s) adapter at 0x%x, ",
FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index b120597043cc..9a99b9e35d41 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -235,8 +235,7 @@ static void kbic_log_adapter( PIA *pi, char * scratch,
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP_16","EPP-32"};
- printk("%s: kbic %s, KingByte %s at 0x%x, ",
- pi->device,KBIC_VERSION,chip,pi->port);
+ printk("kbic %s, KingByte %s at 0x%x, ", KBIC_VERSION, chip, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index 15463cd18968..d87eb3c139bc 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -92,8 +92,9 @@ static void ktti_disconnect ( PIA *pi )
static void ktti_log_adapter( PIA *pi, char * scratch, int verbose )
-{ printk("%s: ktti %s, KT adapter at 0x%x, delay %d\n",
- pi->device,KTTI_VERSION,pi->port,pi->delay);
+{
+ printk("ktti %s, KT adapter at 0x%x, delay %d\n",
+ KTTI_VERSION, pi->port, pi->delay);
}
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index f2a601e77842..0a1e60e20656 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -115,8 +115,7 @@ static void on20_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[2] = {"4-bit","8-bit"};
- printk("%s: on20 %s, OnSpec 90c20 at 0x%x, ",
- pi->device,ON20_VERSION,pi->port);
+ printk("on20 %s, OnSpec 90c20 at 0x%x, ", ON20_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index 66f04015f19a..ceb5018caeec 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -280,8 +280,7 @@ static void on26_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ",
- pi->device,ON26_VERSION,pi->port);
+ printk("on26 %s, OnSpec 90c26 at 0x%x, ", ON26_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index 3fc6b002c7c8..dcab769aa639 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -17,7 +17,6 @@ struct pi_adapter {
int port; /* base address of parallel port */
int mode; /* transfer mode in use */
int delay; /* adapter delay setting */
- char *device; /* dummy for paride protocol modules */
int unit; /* unit number for chained adapters */
int saved_r0; /* saved port state */
int saved_r2; /* saved port state */
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 08/18] pata_parport: remove typedef struct PIA
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (6 preceding siblings ...)
2023-02-14 22:59 ` [PATCH 07/18] pata_parport: remove device " Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 09/18] pata_parport: remove verbose parameter from log_adapter() Ondrej Zary
` (10 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Remove typedef struct PIA and use struct pi_adapter directly.
Fix formatting (excessive spaces) while at it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 14 +++++++-------
drivers/ata/pata_parport/bpck.c | 24 ++++++++++++------------
drivers/ata/pata_parport/bpck6.c | 22 +++++++++++-----------
drivers/ata/pata_parport/comm.c | 14 +++++++-------
drivers/ata/pata_parport/dstr.c | 14 +++++++-------
drivers/ata/pata_parport/epat.c | 16 ++++++++--------
drivers/ata/pata_parport/epia.c | 16 ++++++++--------
drivers/ata/pata_parport/fit2.c | 14 +++++++-------
drivers/ata/pata_parport/fit3.c | 14 +++++++-------
drivers/ata/pata_parport/friq.c | 20 ++++++++++----------
drivers/ata/pata_parport/frpw.c | 20 ++++++++++----------
drivers/ata/pata_parport/kbic.c | 24 ++++++++++++------------
drivers/ata/pata_parport/ktti.c | 14 +++++++-------
drivers/ata/pata_parport/on20.c | 14 +++++++-------
drivers/ata/pata_parport/on26.c | 16 ++++++++--------
include/linux/pata_parport.h | 2 --
16 files changed, 128 insertions(+), 130 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index bf83e4188c23..4579e554fbad 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -35,7 +35,7 @@
static int cont_map[2] = { 0x08, 0x20 };
-static void aten_write_regr( PIA *pi, int cont, int regr, int val)
+static void aten_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -44,7 +44,7 @@ static void aten_write_regr( PIA *pi, int cont, int regr, int val)
w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc);
}
-static int aten_read_regr( PIA *pi, int cont, int regr )
+static int aten_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int a, b, r;
@@ -67,7 +67,7 @@ static int aten_read_regr( PIA *pi, int cont, int regr )
return -1;
}
-static void aten_read_block( PIA *pi, char * buf, int count )
+static void aten_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, a, b, c, d;
@@ -95,7 +95,7 @@ static void aten_read_block( PIA *pi, char * buf, int count )
}
}
-static void aten_write_block( PIA *pi, char * buf, int count )
+static void aten_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -107,20 +107,20 @@ static void aten_write_block( PIA *pi, char * buf, int count )
w2(0xc);
}
-static void aten_connect ( PIA *pi )
+static void aten_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
w2(0xc);
}
-static void aten_disconnect ( PIA *pi )
+static void aten_disconnect(struct pi_adapter *pi)
{ w0(pi->saved_r0);
w2(pi->saved_r2);
}
-static void aten_log_adapter( PIA *pi, char * scratch, int verbose )
+static void aten_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[2] = {"4-bit","8-bit"};
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index c33ca1cb72ac..46805c584730 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -46,7 +46,7 @@
static int cont_map[3] = { 0x40, 0x48, 0 };
-static int bpck_read_regr( PIA *pi, int cont, int regr )
+static int bpck_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int r, l, h;
@@ -77,7 +77,7 @@ static int bpck_read_regr( PIA *pi, int cont, int regr )
return -1;
}
-static void bpck_write_regr( PIA *pi, int cont, int regr, int val )
+static void bpck_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -106,7 +106,7 @@ static void bpck_write_regr( PIA *pi, int cont, int regr, int val )
#define WR(r,v) bpck_write_regr(pi,2,r,v)
#define RR(r) (bpck_read_regr(pi,2,r))
-static void bpck_write_block( PIA *pi, char * buf, int count )
+static void bpck_write_block(struct pi_adapter *pi, char *buf, int count)
{ int i;
@@ -147,7 +147,7 @@ static void bpck_write_block( PIA *pi, char * buf, int count )
}
}
-static void bpck_read_block( PIA *pi, char * buf, int count )
+static void bpck_read_block(struct pi_adapter *pi, char *buf, int count)
{ int i, l, h;
@@ -194,7 +194,7 @@ static void bpck_read_block( PIA *pi, char * buf, int count )
}
}
-static int bpck_probe_unit ( PIA *pi )
+static int bpck_probe_unit(struct pi_adapter *pi)
{ int o1, o0, f7, id;
int t, s;
@@ -217,7 +217,7 @@ static int bpck_probe_unit ( PIA *pi )
return 1;
}
-static void bpck_connect ( PIA *pi )
+static void bpck_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
w0(0xff-pi->unit); w2(4); w0(pi->unit);
@@ -251,14 +251,14 @@ static void bpck_connect ( PIA *pi )
/* }*/
}
-static void bpck_disconnect ( PIA *pi )
+static void bpck_disconnect(struct pi_adapter *pi)
{ w0(0);
if (pi->mode >= 2) { w2(9); w2(0); } else t2(2);
w2(0x4c); w0(pi->saved_r0);
}
-static void bpck_force_spp ( PIA *pi )
+static void bpck_force_spp(struct pi_adapter *pi)
/* This fakes the EPP protocol to turn off EPP ... */
@@ -276,7 +276,7 @@ static void bpck_force_spp ( PIA *pi )
#define TEST_LEN 16
-static int bpck_test_proto( PIA *pi, char * scratch, int verbose )
+static int bpck_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
{ int i, e, l, h, om;
char buf[TEST_LEN];
@@ -346,7 +346,7 @@ static int bpck_test_proto( PIA *pi, char * scratch, int verbose )
return e;
}
-static void bpck_read_eeprom ( PIA *pi, char * buf )
+static void bpck_read_eeprom(struct pi_adapter *pi, char *buf)
{ int i, j, k, p, v, f, om, od;
@@ -397,7 +397,7 @@ static void bpck_read_eeprom ( PIA *pi, char * buf )
pi->mode = om; pi->delay = od;
}
-static int bpck_test_port ( PIA *pi ) /* check for 8-bit port */
+static int bpck_test_port(struct pi_adapter *pi) /* check for 8-bit port */
{ int i, r, m;
@@ -416,7 +416,7 @@ static int bpck_test_port ( PIA *pi ) /* check for 8-bit port */
return 5;
}
-static void bpck_log_adapter( PIA *pi, char * scratch, int verbose )
+static void bpck_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[5] = { "4-bit","8-bit","EPP-8",
"EPP-16","EPP-32" };
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 13bfd60655dd..8ed3cf3b627e 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -56,7 +56,7 @@ static bool verbose; /* set this to 1 to see debugging messages and whatnot */
#define ATAPI_DEVICE_CONTROL 0x0e /* device control (write) */
/****************************************************************/
-static int bpck6_read_regr(PIA *pi, int cont, int reg)
+static int bpck6_read_regr(struct pi_adapter *pi, int cont, int reg)
{
unsigned int out;
@@ -69,7 +69,7 @@ static int bpck6_read_regr(PIA *pi, int cont, int reg)
return(out);
}
-static void bpck6_write_regr(PIA *pi, int cont, int reg, int val)
+static void bpck6_write_regr(struct pi_adapter *pi, int cont, int reg, int val)
{
/* check for bad settings */
if (reg>=0 && reg<=7 && cont>=0 && cont<=1)
@@ -78,17 +78,17 @@ static void bpck6_write_regr(PIA *pi, int cont, int reg, int val)
}
}
-static void bpck6_write_block( PIA *pi, char * buf, int len )
+static void bpck6_write_block(struct pi_adapter *pi, char *buf, int len)
{
ppc6_wr_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1);
}
-static void bpck6_read_block( PIA *pi, char * buf, int len )
+static void bpck6_read_block(struct pi_adapter *pi, char *buf, int len)
{
ppc6_rd_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1);
}
-static void bpck6_connect ( PIA *pi )
+static void bpck6_connect(struct pi_adapter *pi)
{
if(verbose)
{
@@ -112,7 +112,7 @@ static void bpck6_connect ( PIA *pi )
ppc6_wr_extout(PPCSTRUCT(pi),0x3);
}
-static void bpck6_disconnect ( PIA *pi )
+static void bpck6_disconnect(struct pi_adapter *pi)
{
if(verbose)
{
@@ -122,7 +122,7 @@ static void bpck6_disconnect ( PIA *pi )
ppc6_close(PPCSTRUCT(pi));
}
-static int bpck6_test_port ( PIA *pi ) /* check for 8-bit port */
+static int bpck6_test_port(struct pi_adapter *pi) /* check for 8-bit port */
{
if(verbose)
{
@@ -154,7 +154,7 @@ static int bpck6_test_port ( PIA *pi ) /* check for 8-bit port */
}
}
-static int bpck6_probe_unit ( PIA *pi )
+static int bpck6_probe_unit(struct pi_adapter *pi)
{
int out;
@@ -195,7 +195,7 @@ static int bpck6_probe_unit ( PIA *pi )
}
}
-static void bpck6_log_adapter( PIA *pi, char * scratch, int verbose )
+static void bpck6_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{
char *mode_string[5]=
{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
@@ -206,7 +206,7 @@ static void bpck6_log_adapter( PIA *pi, char * scratch, int verbose )
pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
}
-static int bpck6_init_proto(PIA *pi)
+static int bpck6_init_proto(struct pi_adapter *pi)
{
Interface *p = kzalloc(sizeof(Interface), GFP_KERNEL);
@@ -219,7 +219,7 @@ static int bpck6_init_proto(PIA *pi)
return -1;
}
-static void bpck6_release_proto(PIA *pi)
+static void bpck6_release_proto(struct pi_adapter *pi)
{
kfree((void *)(pi->private));
}
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 908f6c44548b..06c6fa29295b 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -42,7 +42,7 @@
static int cont_map[2] = { 0x08, 0x10 };
-static int comm_read_regr( PIA *pi, int cont, int regr )
+static int comm_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int l, h, r;
@@ -68,7 +68,7 @@ static int comm_read_regr( PIA *pi, int cont, int regr )
return -1;
}
-static void comm_write_regr( PIA *pi, int cont, int regr, int val )
+static void comm_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -87,7 +87,7 @@ static void comm_write_regr( PIA *pi, int cont, int regr, int val )
}
}
-static void comm_connect ( PIA *pi )
+static void comm_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
@@ -98,14 +98,14 @@ static void comm_connect ( PIA *pi )
w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4);
}
-static void comm_disconnect ( PIA *pi )
+static void comm_disconnect(struct pi_adapter *pi)
{ w2(0); w2(0); w2(0); w2(4);
w0(pi->saved_r0);
w2(pi->saved_r2);
}
-static void comm_read_block( PIA *pi, char * buf, int count )
+static void comm_read_block(struct pi_adapter *pi, char *buf, int count)
{ int i, l, h;
@@ -146,7 +146,7 @@ static void comm_read_block( PIA *pi, char * buf, int count )
/* NB: Watch out for the byte swapped writes ! */
-static void comm_write_block( PIA *pi, char * buf, int count )
+static void comm_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -179,7 +179,7 @@ static void comm_write_block( PIA *pi, char * buf, int count )
}
}
-static void comm_log_adapter( PIA *pi, char * scratch, int verbose )
+static void comm_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index 3732e9b79429..8cac71eb9c03 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -44,7 +44,7 @@
static int cont_map[2] = { 0x20, 0x40 };
-static int dstr_read_regr( PIA *pi, int cont, int regr )
+static int dstr_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int a, b, r;
@@ -71,7 +71,7 @@ static int dstr_read_regr( PIA *pi, int cont, int regr )
return -1;
}
-static void dstr_write_regr( PIA *pi, int cont, int regr, int val )
+static void dstr_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -98,21 +98,21 @@ static void dstr_write_regr( PIA *pi, int cont, int regr, int val )
w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\
w0(x);w2(5);w2(4);
-static void dstr_connect ( PIA *pi )
+static void dstr_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
w2(4); CCP(0xe0); w0(0xff);
}
-static void dstr_disconnect ( PIA *pi )
+static void dstr_disconnect(struct pi_adapter *pi)
{ CCP(0x30);
w0(pi->saved_r0);
w2(pi->saved_r2);
}
-static void dstr_read_block( PIA *pi, char * buf, int count )
+static void dstr_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, a, b;
@@ -154,7 +154,7 @@ static void dstr_read_block( PIA *pi, char * buf, int count )
}
}
-static void dstr_write_block( PIA *pi, char * buf, int count )
+static void dstr_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -190,7 +190,7 @@ static void dstr_write_block( PIA *pi, char * buf, int count )
}
-static void dstr_log_adapter( PIA *pi, char * scratch, int verbose )
+static void dstr_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 59720daa9c19..9276dcb261d8 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -44,7 +44,7 @@ MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
static int cont_map[3] = { 0x18, 0x10, 0 };
-static void epat_write_regr( PIA *pi, int cont, int regr, int val)
+static void epat_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -65,7 +65,7 @@ static void epat_write_regr( PIA *pi, int cont, int regr, int val)
}
}
-static int epat_read_regr( PIA *pi, int cont, int regr )
+static int epat_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int a, b, r;
@@ -94,7 +94,7 @@ static int epat_read_regr( PIA *pi, int cont, int regr )
return -1; /* never gets here */
}
-static void epat_read_block( PIA *pi, char * buf, int count )
+static void epat_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, ph, a, b;
@@ -159,7 +159,7 @@ static void epat_read_block( PIA *pi, char * buf, int count )
}
}
-static void epat_write_block( PIA *pi, char * buf, int count )
+static void epat_write_block(struct pi_adapter *pi, char *buf, int count)
{ int ph, k;
@@ -210,7 +210,7 @@ static void epat_write_block( PIA *pi, char * buf, int count )
#define CPP(x) w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
-static void epat_connect ( PIA *pi )
+static void epat_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
@@ -242,13 +242,13 @@ static void epat_connect ( PIA *pi )
}
}
-static void epat_disconnect (PIA *pi)
+static void epat_disconnect(struct pi_adapter *pi)
{ CPP(0x30);
w0(pi->saved_r0);
w2(pi->saved_r2);
}
-static int epat_test_proto( PIA *pi, char * scratch, int verbose )
+static int epat_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
{ int k, j, f, cc;
int e[2] = {0,0};
@@ -287,7 +287,7 @@ static int epat_test_proto( PIA *pi, char * scratch, int verbose )
return (e[0] && e[1]) || f;
}
-static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
+static void epat_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ int ver;
char *mode_string[6] =
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 610269083441..85b1aba995e1 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -46,7 +46,7 @@
static int cont_map[2] = { 0, 0x80 };
-static int epia_read_regr( PIA *pi, int cont, int regr )
+static int epia_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int a, b, r;
@@ -79,7 +79,7 @@ static int epia_read_regr( PIA *pi, int cont, int regr )
return -1;
}
-static void epia_write_regr( PIA *pi, int cont, int regr, int val)
+static void epia_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -110,7 +110,7 @@ static void epia_write_regr( PIA *pi, int cont, int regr, int val)
2048 byte reads (the last two being used in the CDrom drivers.
*/
-static void epia_connect ( PIA *pi )
+static void epia_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
@@ -124,7 +124,7 @@ static void epia_connect ( PIA *pi )
WR(0x86,8);
}
-static void epia_disconnect ( PIA *pi )
+static void epia_disconnect(struct pi_adapter *pi)
{ /* WR(0x84,0x10); */
w0(pi->saved_r0);
@@ -133,7 +133,7 @@ static void epia_disconnect ( PIA *pi )
w2(pi->saved_r2);
}
-static void epia_read_block( PIA *pi, char * buf, int count )
+static void epia_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, ph, a, b;
@@ -193,7 +193,7 @@ static void epia_read_block( PIA *pi, char * buf, int count )
}
}
-static void epia_write_block( PIA *pi, char * buf, int count )
+static void epia_write_block(struct pi_adapter *pi, char *buf, int count)
{ int ph, k, last, d;
@@ -234,7 +234,7 @@ static void epia_write_block( PIA *pi, char * buf, int count )
}
-static int epia_test_proto( PIA *pi, char * scratch, int verbose )
+static int epia_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
{ int j, k, f;
int e[2] = {0,0};
@@ -272,7 +272,7 @@ static int epia_test_proto( PIA *pi, char * scratch, int verbose )
}
-static void epia_log_adapter( PIA *pi, char * scratch, int verbose )
+static void epia_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index 28de8e4e41c3..67e095d6a718 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -37,13 +37,13 @@ devices.
*/
-static void fit2_write_regr( PIA *pi, int cont, int regr, int val)
+static void fit2_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ if (cont == 1) return;
w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4);
}
-static int fit2_read_regr( PIA *pi, int cont, int regr )
+static int fit2_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int a, b, r;
@@ -61,7 +61,7 @@ static int fit2_read_regr( PIA *pi, int cont, int regr )
}
-static void fit2_read_block( PIA *pi, char * buf, int count )
+static void fit2_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, a, b, c, d;
@@ -87,7 +87,7 @@ static void fit2_read_block( PIA *pi, char * buf, int count )
}
-static void fit2_write_block( PIA *pi, char * buf, int count )
+static void fit2_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -100,20 +100,20 @@ static void fit2_write_block( PIA *pi, char * buf, int count )
w2(4);
}
-static void fit2_connect ( PIA *pi )
+static void fit2_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
w2(0xcc);
}
-static void fit2_disconnect ( PIA *pi )
+static void fit2_disconnect(struct pi_adapter *pi)
{ w0(pi->saved_r0);
w2(pi->saved_r2);
}
-static void fit2_log_adapter( PIA *pi, char * scratch, int verbose )
+static void fit2_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{
printk("fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index 0366f3123508..01e862a94b96 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -39,7 +39,7 @@
*/
-static void fit3_write_regr( PIA *pi, int cont, int regr, int val)
+static void fit3_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ if (cont == 1) return;
@@ -59,7 +59,7 @@ static void fit3_write_regr( PIA *pi, int cont, int regr, int val)
}
}
-static int fit3_read_regr( PIA *pi, int cont, int regr )
+static int fit3_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int a, b;
@@ -92,7 +92,7 @@ static int fit3_read_regr( PIA *pi, int cont, int regr )
}
-static void fit3_read_block( PIA *pi, char * buf, int count )
+static void fit3_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, a, b, c, d;
@@ -131,7 +131,7 @@ static void fit3_read_block( PIA *pi, char * buf, int count )
}
}
-static void fit3_write_block( PIA *pi, char * buf, int count )
+static void fit3_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -152,7 +152,7 @@ static void fit3_write_block( PIA *pi, char * buf, int count )
}
}
-static void fit3_connect ( PIA *pi )
+static void fit3_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
@@ -162,14 +162,14 @@ static void fit3_connect ( PIA *pi )
}
}
-static void fit3_disconnect ( PIA *pi )
+static void fit3_disconnect(struct pi_adapter *pi)
{ w2(0xc); w0(0xa); w2(0x8); w2(0xc);
w0(pi->saved_r0);
w2(pi->saved_r2);
}
-static void fit3_log_adapter( PIA *pi, char * scratch, int verbose )
+static void fit3_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 9306a2c78d90..9f8f4e6b1a7c 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -48,7 +48,7 @@
static int cont_map[2] = { 0x08, 0x10 };
-static int friq_read_regr( PIA *pi, int cont, int regr )
+static int friq_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int h,l,r;
@@ -63,7 +63,7 @@ static int friq_read_regr( PIA *pi, int cont, int regr )
}
-static void friq_write_regr( PIA *pi, int cont, int regr, int val)
+static void friq_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -74,7 +74,7 @@ static void friq_write_regr( PIA *pi, int cont, int regr, int val)
w2(5);w2(7);w2(5);w2(4);
}
-static void friq_read_block_int( PIA *pi, char * buf, int count, int regr )
+static void friq_read_block_int(struct pi_adapter *pi, char *buf, int count, int regr)
{ int h, l, k, ph;
@@ -129,12 +129,12 @@ static void friq_read_block_int( PIA *pi, char * buf, int count, int regr )
}
}
-static void friq_read_block( PIA *pi, char * buf, int count)
+static void friq_read_block(struct pi_adapter *pi, char *buf, int count)
{ friq_read_block_int(pi,buf,count,0x08);
}
-static void friq_write_block( PIA *pi, char * buf, int count )
+static void friq_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -166,21 +166,21 @@ static void friq_write_block( PIA *pi, char * buf, int count )
}
}
-static void friq_connect ( PIA *pi )
+static void friq_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
w2(4);
}
-static void friq_disconnect ( PIA *pi )
+static void friq_disconnect(struct pi_adapter *pi)
{ CMD(0x20);
w0(pi->saved_r0);
w2(pi->saved_r2);
}
-static int friq_test_proto( PIA *pi, char * scratch, int verbose )
+static int friq_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
{ int j, k, r;
int e[2] = {0,0};
@@ -216,7 +216,7 @@ static int friq_test_proto( PIA *pi, char * scratch, int verbose )
}
-static void friq_log_adapter( PIA *pi, char * scratch, int verbose )
+static void friq_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[6] = {"4-bit","8-bit",
"EPP-8","EPP-16","EPP-32"};
@@ -233,7 +233,7 @@ static void friq_log_adapter( PIA *pi, char * scratch, int verbose )
}
-static void friq_release_proto( PIA *pi)
+static void friq_release_proto(struct pi_adapter *pi)
{
if (pi->private) { /* turn off the power */
friq_connect(pi);
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 63f2165fec63..e93570190dab 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -44,7 +44,7 @@
static int cont_map[2] = { 0x08, 0x10 };
-static int frpw_read_regr( PIA *pi, int cont, int regr )
+static int frpw_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int h,l,r;
@@ -60,7 +60,7 @@ static int frpw_read_regr( PIA *pi, int cont, int regr )
}
-static void frpw_write_regr( PIA *pi, int cont, int regr, int val)
+static void frpw_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -71,7 +71,7 @@ static void frpw_write_regr( PIA *pi, int cont, int regr, int val)
w2(5);w2(7);w2(5);w2(4);
}
-static void frpw_read_block_int( PIA *pi, char * buf, int count, int regr )
+static void frpw_read_block_int(struct pi_adapter *pi, char *buf, int count, int regr)
{ int h, l, k, ph;
@@ -132,12 +132,12 @@ static void frpw_read_block_int( PIA *pi, char * buf, int count, int regr )
}
}
-static void frpw_read_block( PIA *pi, char * buf, int count)
+static void frpw_read_block(struct pi_adapter *pi, char *buf, int count)
{ frpw_read_block_int(pi,buf,count,0x08);
}
-static void frpw_write_block( PIA *pi, char * buf, int count )
+static void frpw_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -170,14 +170,14 @@ static void frpw_write_block( PIA *pi, char * buf, int count )
}
}
-static void frpw_connect ( PIA *pi )
+static void frpw_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
w2(4);
}
-static void frpw_disconnect ( PIA *pi )
+static void frpw_disconnect(struct pi_adapter *pi)
{ w2(4); w0(0x20); cec4;
w0(pi->saved_r0);
@@ -188,7 +188,7 @@ static void frpw_disconnect ( PIA *pi )
between the Xilinx and ASIC implementations of the Freecom adapter.
*/
-static int frpw_test_pnp ( PIA *pi )
+static int frpw_test_pnp(struct pi_adapter *pi)
/* returns chip_type: 0 = Xilinx, 1 = ASIC */
@@ -221,7 +221,7 @@ static int frpw_test_pnp ( PIA *pi )
a hack :-(
*/
-static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
+static int frpw_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
{ int j, k, r;
int e[2] = {0,0};
@@ -267,7 +267,7 @@ static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
}
-static void frpw_log_adapter( PIA *pi, char * scratch, int verbose )
+static void frpw_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
"EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index 9a99b9e35d41..fffb79054144 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -42,7 +42,7 @@
static int cont_map[2] = { 0x80, 0x40 };
-static int kbic_read_regr( PIA *pi, int cont, int regr )
+static int kbic_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int a, b, s;
@@ -72,7 +72,7 @@ static int kbic_read_regr( PIA *pi, int cont, int regr )
return -1;
}
-static void kbic_write_regr( PIA *pi, int cont, int regr, int val)
+static void kbic_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int s;
@@ -96,14 +96,14 @@ static void kbic_write_regr( PIA *pi, int cont, int regr, int val)
}
}
-static void k951_connect ( PIA *pi )
+static void k951_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
w2(4);
}
-static void k951_disconnect ( PIA *pi )
+static void k951_disconnect(struct pi_adapter *pi)
{ w0(pi->saved_r0);
w2(pi->saved_r2);
@@ -112,7 +112,7 @@ static void k951_disconnect ( PIA *pi )
#define CCP(x) w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\
w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff);
-static void k971_connect ( PIA *pi )
+static void k971_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
@@ -120,7 +120,7 @@ static void k971_connect ( PIA *pi )
w2(4);
}
-static void k971_disconnect ( PIA *pi )
+static void k971_disconnect(struct pi_adapter *pi)
{ CCP(0x30);
w0(pi->saved_r0);
@@ -131,7 +131,7 @@ static void k971_disconnect ( PIA *pi )
have this property.
*/
-static void kbic_read_block( PIA *pi, char * buf, int count )
+static void kbic_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, a, b;
@@ -189,7 +189,7 @@ static void kbic_read_block( PIA *pi, char * buf, int count )
}
}
-static void kbic_write_block( PIA *pi, char * buf, int count )
+static void kbic_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -229,8 +229,8 @@ static void kbic_write_block( PIA *pi, char * buf, int count )
}
-static void kbic_log_adapter( PIA *pi, char * scratch,
- int verbose, char * chip )
+static void kbic_log_adapter(struct pi_adapter *pi, char *scratch,
+ int verbose, char *chip)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP_16","EPP-32"};
@@ -241,12 +241,12 @@ static void kbic_log_adapter( PIA *pi, char * scratch,
}
-static void k951_log_adapter( PIA *pi, char * scratch, int verbose )
+static void k951_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ kbic_log_adapter(pi,scratch,verbose,"KBIC-951A");
}
-static void k971_log_adapter( PIA *pi, char * scratch, int verbose )
+static void k971_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ kbic_log_adapter(pi,scratch,verbose,"KBIC-971A");
}
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index d87eb3c139bc..ffb2af0ce045 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -29,7 +29,7 @@
static int cont_map[2] = { 0x10, 0x08 };
-static void ktti_write_regr( PIA *pi, int cont, int regr, int val)
+static void ktti_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -39,7 +39,7 @@ static void ktti_write_regr( PIA *pi, int cont, int regr, int val)
w0(val); w2(3); w0(0); w2(6); w2(0xb);
}
-static int ktti_read_regr( PIA *pi, int cont, int regr )
+static int ktti_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int a, b, r;
@@ -51,7 +51,7 @@ static int ktti_read_regr( PIA *pi, int cont, int regr )
}
-static void ktti_read_block( PIA *pi, char * buf, int count )
+static void ktti_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, a, b;
@@ -64,7 +64,7 @@ static void ktti_read_block( PIA *pi, char * buf, int count )
}
}
-static void ktti_write_block( PIA *pi, char * buf, int count )
+static void ktti_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -76,21 +76,21 @@ static void ktti_write_block( PIA *pi, char * buf, int count )
}
}
-static void ktti_connect ( PIA *pi )
+static void ktti_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
w2(0xb); w2(0xa); w0(0); w2(3); w2(6);
}
-static void ktti_disconnect ( PIA *pi )
+static void ktti_disconnect(struct pi_adapter *pi)
{ w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
w0(pi->saved_r0);
w2(pi->saved_r2);
}
-static void ktti_log_adapter( PIA *pi, char * scratch, int verbose )
+static void ktti_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{
printk("ktti %s, KT adapter at 0x%x, delay %d\n",
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index 0a1e60e20656..fb3399329fb6 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -33,7 +33,7 @@
cont = 1 - access the IDE command set
*/
-static int on20_read_regr( PIA *pi, int cont, int regr )
+static int on20_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int h,l, r ;
@@ -56,7 +56,7 @@ static int on20_read_regr( PIA *pi, int cont, int regr )
return -1;
}
-static void on20_write_regr( PIA *pi, int cont, int regr, int val )
+static void on20_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -67,7 +67,7 @@ static void on20_write_regr( PIA *pi, int cont, int regr, int val )
op(0); vl(val);
}
-static void on20_connect ( PIA *pi)
+static void on20_connect(struct pi_adapter *pi)
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
@@ -77,14 +77,14 @@ static void on20_connect ( PIA *pi)
else { op(2); vl(0); op(2); vl(8); }
}
-static void on20_disconnect ( PIA *pi )
+static void on20_disconnect(struct pi_adapter *pi)
{ w2(4);w0(7);w2(4);w2(0xc);w2(4);
w0(pi->saved_r0);
w2(pi->saved_r2);
}
-static void on20_read_block( PIA *pi, char * buf, int count )
+static void on20_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, l, h;
@@ -101,7 +101,7 @@ static void on20_read_block( PIA *pi, char * buf, int count )
w2(4);
}
-static void on20_write_block( PIA *pi, char * buf, int count )
+static void on20_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -111,7 +111,7 @@ static void on20_write_block( PIA *pi, char * buf, int count )
w2(4);
}
-static void on20_log_adapter( PIA *pi, char * scratch, int verbose )
+static void on20_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[2] = {"4-bit","8-bit"};
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index ceb5018caeec..7e5fc499fcc5 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -44,7 +44,7 @@
cont = 1 - access the IDE command set
*/
-static int on26_read_regr( PIA *pi, int cont, int regr )
+static int on26_read_regr(struct pi_adapter *pi, int cont, int regr)
{ int a, b, r;
@@ -73,7 +73,7 @@ static int on26_read_regr( PIA *pi, int cont, int regr )
return -1;
}
-static void on26_write_regr( PIA *pi, int cont, int regr, int val )
+static void on26_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
{ int r;
@@ -99,7 +99,7 @@ static void on26_write_regr( PIA *pi, int cont, int regr, int val )
#define CCP(x) w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
-static void on26_connect ( PIA *pi )
+static void on26_connect(struct pi_adapter *pi)
{ int x;
@@ -113,7 +113,7 @@ static void on26_connect ( PIA *pi )
w0(2); P1; w0(x); P2;
}
-static void on26_disconnect ( PIA *pi )
+static void on26_disconnect(struct pi_adapter *pi)
{ if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
else { w0(4); P1; w0(4); P1; }
@@ -124,7 +124,7 @@ static void on26_disconnect ( PIA *pi )
#define RESET_WAIT 200
-static int on26_test_port( PIA *pi) /* hard reset */
+static int on26_test_port(struct pi_adapter *pi) /* hard reset */
{ int i, m, d, x=0, y=0;
@@ -183,7 +183,7 @@ static int on26_test_port( PIA *pi) /* hard reset */
}
-static void on26_read_block( PIA *pi, char * buf, int count )
+static void on26_read_block(struct pi_adapter *pi, char *buf, int count)
{ int k, a, b;
@@ -232,7 +232,7 @@ static void on26_read_block( PIA *pi, char * buf, int count )
}
}
-static void on26_write_block( PIA *pi, char * buf, int count )
+static void on26_write_block(struct pi_adapter *pi, char *buf, int count)
{ int k;
@@ -275,7 +275,7 @@ static void on26_write_block( PIA *pi, char * buf, int count )
}
-static void on26_log_adapter( PIA *pi, char * scratch, int verbose )
+static void on26_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index dcab769aa639..381b4d0e3574 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -24,8 +24,6 @@ struct pi_adapter {
struct pardevice *pardev; /* pointer to pardevice */
};
-typedef struct pi_adapter PIA; /* for paride protocol modules */
-
/* registers are addressed as (cont,regr)
* cont: 0 for command register file, 1 for control register(s)
* regr: 0-7 for register number.
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 09/18] pata_parport: remove verbose parameter from log_adapter()
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (7 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 08/18] pata_parport: remove typedef struct PIA Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 10/18] pata_parport: remove scratch " Ondrej Zary
` (9 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
verbose parameter of log_adapter() is unused, remove it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 2 +-
drivers/ata/pata_parport/bpck.c | 4 +---
drivers/ata/pata_parport/bpck6.c | 2 +-
drivers/ata/pata_parport/comm.c | 2 +-
drivers/ata/pata_parport/dstr.c | 2 +-
drivers/ata/pata_parport/epat.c | 2 +-
drivers/ata/pata_parport/epia.c | 2 +-
drivers/ata/pata_parport/fit2.c | 2 +-
drivers/ata/pata_parport/fit3.c | 2 +-
drivers/ata/pata_parport/friq.c | 2 +-
drivers/ata/pata_parport/frpw.c | 2 +-
drivers/ata/pata_parport/kbic.c | 15 +++++++--------
drivers/ata/pata_parport/ktti.c | 2 +-
drivers/ata/pata_parport/on20.c | 2 +-
drivers/ata/pata_parport/on26.c | 2 +-
drivers/ata/pata_parport/pata_parport.c | 2 +-
include/linux/pata_parport.h | 2 +-
17 files changed, 23 insertions(+), 26 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 4579e554fbad..0a98954f380f 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -120,7 +120,7 @@ static void aten_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static void aten_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void aten_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[2] = {"4-bit","8-bit"};
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 46805c584730..1a3e3d5b1b25 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -416,7 +416,7 @@ static int bpck_test_port(struct pi_adapter *pi) /* check for 8-bit port */
return 5;
}
-static void bpck_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void bpck_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[5] = { "4-bit","8-bit","EPP-8",
"EPP-16","EPP-32" };
@@ -428,13 +428,11 @@ static void bpck_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
bpck_read_eeprom(pi,scratch);
#ifdef DUMP_EEPROM
- if (verbose) {
for(i=0;i<128;i++)
if ((scratch[i] < ' ') || (scratch[i] > '~'))
scratch[i] = '.';
printk("bpck EEPROM: %64.64s\n", scratch);
printk(" %64.64s\n", &scratch[64]);
- }
#endif
printk("bpck %s, backpack %8.8s unit %d",
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 8ed3cf3b627e..68f7fdcab9be 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -195,7 +195,7 @@ static int bpck6_probe_unit(struct pi_adapter *pi)
}
}
-static void bpck6_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void bpck6_log_adapter(struct pi_adapter *pi, char *scratch)
{
char *mode_string[5]=
{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 06c6fa29295b..69a66658aa29 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -179,7 +179,7 @@ static void comm_write_block(struct pi_adapter *pi, char *buf, int count)
}
}
-static void comm_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void comm_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index 8cac71eb9c03..17b1a7cb0a15 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -190,7 +190,7 @@ static void dstr_write_block(struct pi_adapter *pi, char *buf, int count)
}
-static void dstr_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void dstr_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 9276dcb261d8..b125df16f160 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -287,7 +287,7 @@ static int epat_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
return (e[0] && e[1]) || f;
}
-static void epat_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void epat_log_adapter(struct pi_adapter *pi, char *scratch)
{ int ver;
char *mode_string[6] =
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 85b1aba995e1..452d3a8e17af 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -272,7 +272,7 @@ static int epia_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
-static void epia_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void epia_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index 67e095d6a718..632c51af84d7 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -113,7 +113,7 @@ static void fit2_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static void fit2_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void fit2_log_adapter(struct pi_adapter *pi, char *scratch)
{
printk("fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index 01e862a94b96..bdf90cb536c2 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -169,7 +169,7 @@ static void fit3_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static void fit3_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void fit3_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 9f8f4e6b1a7c..ee922b40bc95 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -216,7 +216,7 @@ static int friq_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
-static void friq_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void friq_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[6] = {"4-bit","8-bit",
"EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index e93570190dab..f17e0a4f66c2 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -267,7 +267,7 @@ static int frpw_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
-static void frpw_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void frpw_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
"EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index fffb79054144..3718441f60aa 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -229,8 +229,7 @@ static void kbic_write_block(struct pi_adapter *pi, char *buf, int count)
}
-static void kbic_log_adapter(struct pi_adapter *pi, char *scratch,
- int verbose, char *chip)
+static void kbic_log_adapter(struct pi_adapter *pi, char *scratch, char *chip)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP_16","EPP-32"};
@@ -241,14 +240,14 @@ static void kbic_log_adapter(struct pi_adapter *pi, char *scratch,
}
-static void k951_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
-
-{ kbic_log_adapter(pi,scratch,verbose,"KBIC-951A");
+static void k951_log_adapter(struct pi_adapter *pi, char *scratch)
+{
+ kbic_log_adapter(pi, scratch, "KBIC-951A");
}
-static void k971_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
-
-{ kbic_log_adapter(pi,scratch,verbose,"KBIC-971A");
+static void k971_log_adapter(struct pi_adapter *pi, char *scratch)
+{
+ kbic_log_adapter(pi, scratch, "KBIC-971A");
}
static struct pi_protocol k951 = {
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index ffb2af0ce045..ad7f0314f962 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -90,7 +90,7 @@ static void ktti_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static void ktti_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void ktti_log_adapter(struct pi_adapter *pi, char *scratch)
{
printk("ktti %s, KT adapter at 0x%x, delay %d\n",
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index fb3399329fb6..12a423f61996 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -111,7 +111,7 @@ static void on20_write_block(struct pi_adapter *pi, char *buf, int count)
w2(4);
}
-static void on20_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void on20_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[2] = {"4-bit","8-bit"};
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index 7e5fc499fcc5..ee5a0cc74900 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -275,7 +275,7 @@ static void on26_write_block(struct pi_adapter *pi, char *buf, int count)
}
-static void on26_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+static void on26_log_adapter(struct pi_adapter *pi, char *scratch)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
index 49e99c9465fd..5aa0f05590fb 100644
--- a/drivers/ata/pata_parport/pata_parport.c
+++ b/drivers/ata/pata_parport/pata_parport.c
@@ -474,7 +474,7 @@ static struct pi_adapter *pi_init_one(struct parport *parport,
goto out_unreg_parport;
}
- pi->proto->log_adapter(pi, scratch, 1);
+ pi->proto->log_adapter(pi, scratch);
host = ata_host_alloc_pinfo(&pi->pardev->dev, ppi, 1);
if (!host)
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index 381b4d0e3574..033cabede51c 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -68,7 +68,7 @@ struct pi_protocol {
int (*test_port)(struct pi_adapter *pi);
int (*probe_unit)(struct pi_adapter *pi);
int (*test_proto)(struct pi_adapter *pi, char *scratch, int verbose);
- void (*log_adapter)(struct pi_adapter *pi, char *scratch, int verbose);
+ void (*log_adapter)(struct pi_adapter *pi, char *scratch);
int (*init_proto)(struct pi_adapter *pi);
void (*release_proto)(struct pi_adapter *pi);
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 10/18] pata_parport: remove scratch parameter from log_adapter()
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (8 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 09/18] pata_parport: remove verbose parameter from log_adapter() Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 11/18] pata_parport: use dev_* instead of printk Ondrej Zary
` (8 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
scratch parameter of log_adapter() is only used by bpck driver.
Remove it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 2 +-
drivers/ata/pata_parport/bpck.c | 4 ++--
drivers/ata/pata_parport/bpck6.c | 2 +-
drivers/ata/pata_parport/comm.c | 2 +-
drivers/ata/pata_parport/dstr.c | 2 +-
drivers/ata/pata_parport/epat.c | 2 +-
drivers/ata/pata_parport/epia.c | 2 +-
drivers/ata/pata_parport/fit2.c | 2 +-
drivers/ata/pata_parport/fit3.c | 2 +-
drivers/ata/pata_parport/friq.c | 2 +-
drivers/ata/pata_parport/frpw.c | 2 +-
drivers/ata/pata_parport/kbic.c | 10 +++++-----
drivers/ata/pata_parport/ktti.c | 2 +-
drivers/ata/pata_parport/on20.c | 2 +-
drivers/ata/pata_parport/on26.c | 2 +-
drivers/ata/pata_parport/pata_parport.c | 2 +-
include/linux/pata_parport.h | 2 +-
17 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 0a98954f380f..3f5c50c2c43a 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -120,7 +120,7 @@ static void aten_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static void aten_log_adapter(struct pi_adapter *pi, char *scratch)
+static void aten_log_adapter(struct pi_adapter *pi)
{ char *mode_string[2] = {"4-bit","8-bit"};
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 1a3e3d5b1b25..f475a25769f0 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -416,11 +416,11 @@ static int bpck_test_port(struct pi_adapter *pi) /* check for 8-bit port */
return 5;
}
-static void bpck_log_adapter(struct pi_adapter *pi, char *scratch)
+static void bpck_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = { "4-bit","8-bit","EPP-8",
"EPP-16","EPP-32" };
-
+ char scratch[128];
#ifdef DUMP_EEPROM
int i;
#endif
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 68f7fdcab9be..41395a97d77c 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -195,7 +195,7 @@ static int bpck6_probe_unit(struct pi_adapter *pi)
}
}
-static void bpck6_log_adapter(struct pi_adapter *pi, char *scratch)
+static void bpck6_log_adapter(struct pi_adapter *pi)
{
char *mode_string[5]=
{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 69a66658aa29..88476072b708 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -179,7 +179,7 @@ static void comm_write_block(struct pi_adapter *pi, char *buf, int count)
}
}
-static void comm_log_adapter(struct pi_adapter *pi, char *scratch)
+static void comm_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index 17b1a7cb0a15..a8b238828061 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -190,7 +190,7 @@ static void dstr_write_block(struct pi_adapter *pi, char *buf, int count)
}
-static void dstr_log_adapter(struct pi_adapter *pi, char *scratch)
+static void dstr_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index b125df16f160..a30313a2c3d7 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -287,7 +287,7 @@ static int epat_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
return (e[0] && e[1]) || f;
}
-static void epat_log_adapter(struct pi_adapter *pi, char *scratch)
+static void epat_log_adapter(struct pi_adapter *pi)
{ int ver;
char *mode_string[6] =
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 452d3a8e17af..ece7862dc058 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -272,7 +272,7 @@ static int epia_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
-static void epia_log_adapter(struct pi_adapter *pi, char *scratch)
+static void epia_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index 632c51af84d7..056e92d8e015 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -113,7 +113,7 @@ static void fit2_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static void fit2_log_adapter(struct pi_adapter *pi, char *scratch)
+static void fit2_log_adapter(struct pi_adapter *pi)
{
printk("fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index bdf90cb536c2..fa37f7f17fb2 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -169,7 +169,7 @@ static void fit3_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static void fit3_log_adapter(struct pi_adapter *pi, char *scratch)
+static void fit3_log_adapter(struct pi_adapter *pi)
{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index ee922b40bc95..bf597ee520b7 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -216,7 +216,7 @@ static int friq_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
-static void friq_log_adapter(struct pi_adapter *pi, char *scratch)
+static void friq_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit",
"EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index f17e0a4f66c2..9b8db1122154 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -267,7 +267,7 @@ static int frpw_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
-static void frpw_log_adapter(struct pi_adapter *pi, char *scratch)
+static void frpw_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
"EPP-8","EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index 3718441f60aa..b23632c1da39 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -229,7 +229,7 @@ static void kbic_write_block(struct pi_adapter *pi, char *buf, int count)
}
-static void kbic_log_adapter(struct pi_adapter *pi, char *scratch, char *chip)
+static void kbic_log_adapter(struct pi_adapter *pi, char *chip)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP_16","EPP-32"};
@@ -240,14 +240,14 @@ static void kbic_log_adapter(struct pi_adapter *pi, char *scratch, char *chip)
}
-static void k951_log_adapter(struct pi_adapter *pi, char *scratch)
+static void k951_log_adapter(struct pi_adapter *pi)
{
- kbic_log_adapter(pi, scratch, "KBIC-951A");
+ kbic_log_adapter(pi, "KBIC-951A");
}
-static void k971_log_adapter(struct pi_adapter *pi, char *scratch)
+static void k971_log_adapter(struct pi_adapter *pi)
{
- kbic_log_adapter(pi, scratch, "KBIC-971A");
+ kbic_log_adapter(pi, "KBIC-971A");
}
static struct pi_protocol k951 = {
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index ad7f0314f962..62b0692d1b94 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -90,7 +90,7 @@ static void ktti_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static void ktti_log_adapter(struct pi_adapter *pi, char *scratch)
+static void ktti_log_adapter(struct pi_adapter *pi)
{
printk("ktti %s, KT adapter at 0x%x, delay %d\n",
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index 12a423f61996..a3b0708aed71 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -111,7 +111,7 @@ static void on20_write_block(struct pi_adapter *pi, char *buf, int count)
w2(4);
}
-static void on20_log_adapter(struct pi_adapter *pi, char *scratch)
+static void on20_log_adapter(struct pi_adapter *pi)
{ char *mode_string[2] = {"4-bit","8-bit"};
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index ee5a0cc74900..8dc8296d50e6 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -275,7 +275,7 @@ static void on26_write_block(struct pi_adapter *pi, char *buf, int count)
}
-static void on26_log_adapter(struct pi_adapter *pi, char *scratch)
+static void on26_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
index 5aa0f05590fb..f42a2cafc382 100644
--- a/drivers/ata/pata_parport/pata_parport.c
+++ b/drivers/ata/pata_parport/pata_parport.c
@@ -474,7 +474,7 @@ static struct pi_adapter *pi_init_one(struct parport *parport,
goto out_unreg_parport;
}
- pi->proto->log_adapter(pi, scratch);
+ pi->proto->log_adapter(pi);
host = ata_host_alloc_pinfo(&pi->pardev->dev, ppi, 1);
if (!host)
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index 033cabede51c..c44d30b3e886 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -68,7 +68,7 @@ struct pi_protocol {
int (*test_port)(struct pi_adapter *pi);
int (*probe_unit)(struct pi_adapter *pi);
int (*test_proto)(struct pi_adapter *pi, char *scratch, int verbose);
- void (*log_adapter)(struct pi_adapter *pi, char *scratch);
+ void (*log_adapter)(struct pi_adapter *pi);
int (*init_proto)(struct pi_adapter *pi);
void (*release_proto)(struct pi_adapter *pi);
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 11/18] pata_parport: use dev_* instead of printk
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (9 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 10/18] pata_parport: remove scratch " Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 12/18] pata_parport: use print_hex_* Ondrej Zary
` (7 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Use dev_info/dev_err/dev_dbg instead of printk.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 4 +--
drivers/ata/pata_parport/bpck.c | 4 +--
drivers/ata/pata_parport/bpck6.c | 45 +++++++++-----------------------
drivers/ata/pata_parport/comm.c | 4 +--
drivers/ata/pata_parport/dstr.c | 4 +--
drivers/ata/pata_parport/epat.c | 10 +++----
drivers/ata/pata_parport/epia.c | 10 +++----
drivers/ata/pata_parport/fit2.c | 2 +-
drivers/ata/pata_parport/fit3.c | 2 +-
drivers/ata/pata_parport/friq.c | 10 +++----
drivers/ata/pata_parport/frpw.c | 16 +++++-------
drivers/ata/pata_parport/kbic.c | 4 +--
drivers/ata/pata_parport/ktti.c | 2 +-
drivers/ata/pata_parport/on20.c | 4 +--
drivers/ata/pata_parport/on26.c | 6 ++---
15 files changed, 48 insertions(+), 79 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 3f5c50c2c43a..ccbba14ccab1 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -124,8 +124,8 @@ static void aten_log_adapter(struct pi_adapter *pi)
{ char *mode_string[2] = {"4-bit","8-bit"};
- printk("aten %s, ATEN EH-100 at 0x%x, ", ATEN_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "aten %s, ATEN EH-100 at 0x%x, ", ATEN_VERSION, pi->port);
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index f475a25769f0..1cba098b4b82 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -435,9 +435,9 @@ static void bpck_log_adapter(struct pi_adapter *pi)
printk(" %64.64s\n", &scratch[64]);
#endif
- printk("bpck %s, backpack %8.8s unit %d",
+ dev_info(&pi->dev, "bpck %s, backpack %8.8s unit %d",
BPCK_VERSION, &scratch[110], pi->unit);
- printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port,
+ dev_info(&pi->dev, " at 0x%x, mode %d (%s), delay %d\n", pi->port,
pi->mode,mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 41395a97d77c..4770e29bfdeb 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -90,10 +90,7 @@ static void bpck6_read_block(struct pi_adapter *pi, char *buf, int len)
static void bpck6_connect(struct pi_adapter *pi)
{
- if(verbose)
- {
- printk(KERN_DEBUG "connect\n");
- }
+ dev_dbg(&pi->dev, "connect\n");
if(pi->mode >=2)
{
@@ -114,22 +111,16 @@ static void bpck6_connect(struct pi_adapter *pi)
static void bpck6_disconnect(struct pi_adapter *pi)
{
- if(verbose)
- {
- printk("disconnect\n");
- }
+ dev_dbg(&pi->dev, "disconnect\n");
ppc6_wr_extout(PPCSTRUCT(pi),0x0);
ppc6_close(PPCSTRUCT(pi));
}
static int bpck6_test_port(struct pi_adapter *pi) /* check for 8-bit port */
{
- if(verbose)
- {
- printk(KERN_DEBUG "PARPORT indicates modes=%x for lp=0x%lx\n",
- ((struct pardevice*)(pi->pardev))->port->modes,
- ((struct pardevice *)(pi->pardev))->port->base);
- }
+ dev_dbg(&pi->dev, "PARPORT indicates modes=%x for lp=0x%lx\n",
+ ((struct pardevice *)(pi->pardev))->port->modes,
+ ((struct pardevice *)(pi->pardev))->port->base);
/*copy over duplicate stuff.. initialize state info*/
PPCSTRUCT(pi)->ppc_id=pi->unit;
@@ -158,10 +149,7 @@ static int bpck6_probe_unit(struct pi_adapter *pi)
{
int out;
- if(verbose)
- {
- printk(KERN_DEBUG "PROBE UNIT %x on port:%x\n",pi->unit,pi->port);
- }
+ dev_dbg(&pi->dev, "PROBE UNIT %x on port:%x\n", pi->unit, pi->port);
/*SET PPC UNIT NUMBER*/
PPCSTRUCT(pi)->ppc_id=pi->unit;
@@ -171,26 +159,17 @@ static int bpck6_probe_unit(struct pi_adapter *pi)
out=ppc6_open(PPCSTRUCT(pi));
- if(verbose)
- {
- printk(KERN_DEBUG "ppc_open returned %2x\n",out);
- }
+ dev_dbg(&pi->dev, "ppc_open returned %2x\n", out);
if(out)
{
ppc6_close(PPCSTRUCT(pi));
- if(verbose)
- {
- printk(KERN_DEBUG "leaving probe\n");
- }
+ dev_dbg(&pi->dev, "leaving probe\n");
return(1);
}
else
{
- if(verbose)
- {
- printk(KERN_DEBUG "Failed open\n");
- }
+ dev_dbg(&pi->dev, "Failed open\n");
return(0);
}
}
@@ -200,9 +179,9 @@ static void bpck6_log_adapter(struct pi_adapter *pi)
char *mode_string[5]=
{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- printk("BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
+ dev_info(&pi->dev, "BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
BACKPACK_VERSION, pi->port);
- printk("Unit: %d Mode:%d (%s) Delay %d\n",
+ dev_info(&pi->dev, "Unit: %d Mode:%d (%s) Delay %d\n",
pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
}
@@ -215,7 +194,7 @@ static int bpck6_init_proto(struct pi_adapter *pi)
return 0;
}
- printk(KERN_ERR "ERROR COULDN'T ALLOCATE MEMORY\n");
+ dev_err(&pi->dev, "ERROR COULDN'T ALLOCATE MEMORY\n");
return -1;
}
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 88476072b708..7b59eca52185 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -183,8 +183,8 @@ static void comm_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- printk("comm %s, DataStor Commuter at 0x%x, ", COMM_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "comm %s, DataStor Commuter at 0x%x, ", COMM_VERSION, pi->port);
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index a8b238828061..eb6ddceaeb83 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -195,8 +195,8 @@ static void dstr_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- printk("dstr %s, DataStor EP2000 at 0x%x, ", DSTR_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "dstr %s, DataStor EP2000 at 0x%x, ", DSTR_VERSION, pi->port);
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index a30313a2c3d7..389faa6ae49d 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -279,10 +279,8 @@ static int epat_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
epat_disconnect(pi);
- if (verbose) {
- printk("epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
- pi->port, pi->mode, cc, e[0], e[1], f);
- }
+ dev_dbg(&pi->dev, "epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, cc, e[0], e[1], f);
return (e[0] && e[1]) || f;
}
@@ -298,9 +296,9 @@ static void epat_log_adapter(struct pi_adapter *pi)
ver = RR(0xb);
epat_disconnect(pi);
- printk("epat %s, Shuttle EPAT chip %x at 0x%x, ",
+ dev_info(&pi->dev, "epat %s, Shuttle EPAT chip %x at 0x%x, ",
EPAT_VERSION, ver, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index ece7862dc058..48d12f56c501 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -262,10 +262,8 @@ static int epia_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
WR(0x84,0);
epia_disconnect(pi);
- if (verbose) {
- printk("epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->port, pi->mode, e[0], e[1], f);
- }
+ dev_dbg(&pi->dev, "epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, e[0], e[1], f);
return (e[0] && e[1]) || f;
@@ -277,8 +275,8 @@ static void epia_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP-16","EPP-32"};
- printk("epia %s, Shuttle EPIA at 0x%x, ", EPIA_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "epia %s, Shuttle EPIA at 0x%x, ", EPIA_VERSION, pi->port);
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index 056e92d8e015..d0a781f04411 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -116,7 +116,7 @@ static void fit2_disconnect(struct pi_adapter *pi)
static void fit2_log_adapter(struct pi_adapter *pi)
{
- printk("fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
+ dev_info(&pi->dev, "fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
FIT2_VERSION, pi->port, pi->delay);
}
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index fa37f7f17fb2..f86da2d478cb 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -173,7 +173,7 @@ static void fit3_log_adapter(struct pi_adapter *pi)
{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
- printk("fit3 %s, FIT 3000 adapter at 0x%x, "
+ dev_info(&pi->dev, "fit3 %s, FIT 3000 adapter at 0x%x, "
"mode %d (%s), delay %d\n",
FIT3_VERSION, pi->port,
pi->mode,mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index bf597ee520b7..ec564e7cb930 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -207,10 +207,8 @@ static int friq_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
for (k=0;k<128;k++) if (scratch[k] != k) r++;
friq_disconnect(pi);
- if (verbose) {
- printk("friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->port, pi->mode, e[0], e[1], r);
- }
+ dev_dbg(&pi->dev, "friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, e[0], e[1], r);
return (r || (e[0] && e[1]));
}
@@ -221,9 +219,9 @@ static void friq_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit",
"EPP-8","EPP-16","EPP-32"};
- printk("friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ",
+ dev_info(&pi->dev, "friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ",
FRIQ_VERSION,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
pi->private = 1;
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 9b8db1122154..5ea16a247257 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -230,14 +230,12 @@ static int frpw_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
pi->private = frpw_test_pnp(pi) + 2*pi->port;
if (((pi->private%2) == 0) && (pi->mode > 2)) {
- if (verbose)
- printk("frpw: Xilinx does not support mode %d\n", pi->mode);
+ dev_dbg(&pi->dev, "frpw: Xilinx does not support mode %d\n", pi->mode);
return 1;
}
if (((pi->private%2) == 1) && (pi->mode == 2)) {
- if (verbose)
- printk("frpw: ASIC does not support mode 2\n");
+ dev_dbg(&pi->dev, "frpw: ASIC does not support mode 2\n");
return 1;
}
@@ -258,10 +256,8 @@ static int frpw_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
for (k=0;k<128;k++) if (scratch[k] != k) r++;
frpw_disconnect(pi);
- if (verbose) {
- printk("frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
- pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
- }
+ dev_dbg(&pi->dev, "frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
+ pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
return (r || (e[0] && e[1]));
}
@@ -272,9 +268,9 @@ static void frpw_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
"EPP-8","EPP-16","EPP-32"};
- printk("frpw %s, Freecom (%s) adapter at 0x%x, ",
+ dev_info(&pi->dev, "frpw %s, Freecom (%s) adapter at 0x%x, ",
FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index b23632c1da39..ea1b931ce20d 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -234,8 +234,8 @@ static void kbic_log_adapter(struct pi_adapter *pi, char *chip)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP_16","EPP-32"};
- printk("kbic %s, KingByte %s at 0x%x, ", KBIC_VERSION, chip, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "kbic %s, KingByte %s at 0x%x, ", KBIC_VERSION, chip, pi->port);
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index 62b0692d1b94..b22c283709de 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -93,7 +93,7 @@ static void ktti_disconnect(struct pi_adapter *pi)
static void ktti_log_adapter(struct pi_adapter *pi)
{
- printk("ktti %s, KT adapter at 0x%x, delay %d\n",
+ dev_info(&pi->dev, "ktti %s, KT adapter at 0x%x, delay %d\n",
KTTI_VERSION, pi->port, pi->delay);
}
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index a3b0708aed71..c76d4fb84c61 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -115,8 +115,8 @@ static void on20_log_adapter(struct pi_adapter *pi)
{ char *mode_string[2] = {"4-bit","8-bit"};
- printk("on20 %s, OnSpec 90c20 at 0x%x, ", ON20_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "on20 %s, OnSpec 90c20 at 0x%x, ", ON20_VERSION, pi->port);
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index 8dc8296d50e6..5406e76ea727 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -167,7 +167,7 @@ static int on26_test_port(struct pi_adapter *pi) /* hard reset */
}
if (i == RESET_WAIT)
- printk("on26: Device reset failed (%x,%x)\n",x,y);
+ dev_err(&pi->dev, "on26: Device reset failed (%x,%x)\n", x, y);
w0(4); P1; w0(4); P1;
}
@@ -280,8 +280,8 @@ static void on26_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- printk("on26 %s, OnSpec 90c26 at 0x%x, ", ON26_VERSION, pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
+ dev_info(&pi->dev, "on26 %s, OnSpec 90c26 at 0x%x, ", ON26_VERSION, pi->port);
+ dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
mode_string[pi->mode],pi->delay);
}
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 12/18] pata_parport: use print_hex_*
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (10 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 11/18] pata_parport: use dev_* instead of printk Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 13/18] pata_parport: simplify log_adapter prints, remove VERSION defines Ondrej Zary
` (6 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Use print_hex_* for debug dumps.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/bpck.c | 22 ++++------------------
drivers/ata/pata_parport/epat.c | 2 +-
drivers/ata/pata_parport/epia.c | 2 +-
drivers/ata/pata_parport/friq.c | 2 +-
drivers/ata/pata_parport/frpw.c | 2 +-
5 files changed, 8 insertions(+), 22 deletions(-)
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 1cba098b4b82..dec24983d140 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -334,12 +334,9 @@ static int bpck_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
}
- if (verbose) {
- printk("bpck: 0x%x unit %d mode %d: ",
- pi->port, pi->unit, pi->mode);
- for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]);
- printk("\n");
- }
+ dev_dbg(&pi->dev, "bpck: 0x%x unit %d mode %d: ",
+ pi->port, pi->unit, pi->mode);
+ print_hex_dump_debug("bpck: ", DUMP_PREFIX_NONE, TEST_LEN, 1, buf, TEST_LEN, false);
e = 0;
for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
@@ -421,20 +418,9 @@ static void bpck_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = { "4-bit","8-bit","EPP-8",
"EPP-16","EPP-32" };
char scratch[128];
-#ifdef DUMP_EEPROM
- int i;
-#endif
bpck_read_eeprom(pi,scratch);
-
-#ifdef DUMP_EEPROM
- for(i=0;i<128;i++)
- if ((scratch[i] < ' ') || (scratch[i] > '~'))
- scratch[i] = '.';
- printk("bpck EEPROM: %64.64s\n", scratch);
- printk(" %64.64s\n", &scratch[64]);
-#endif
-
+ print_hex_dump_bytes("bpck EEPROM: ", DUMP_PREFIX_NONE, scratch, 128);
dev_info(&pi->dev, "bpck %s, backpack %8.8s unit %d",
BPCK_VERSION, &scratch[110], pi->unit);
dev_info(&pi->dev, " at 0x%x, mode %d (%s), delay %d\n", pi->port,
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 389faa6ae49d..b08ed2f86668 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -280,7 +280,7 @@ static int epat_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
epat_disconnect(pi);
dev_dbg(&pi->dev, "epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
- pi->port, pi->mode, cc, e[0], e[1], f);
+ pi->port, pi->mode, cc, e[0], e[1], f);
return (e[0] && e[1]) || f;
}
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 48d12f56c501..32bec3449338 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -263,7 +263,7 @@ static int epia_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
epia_disconnect(pi);
dev_dbg(&pi->dev, "epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->port, pi->mode, e[0], e[1], f);
+ pi->port, pi->mode, e[0], e[1], f);
return (e[0] && e[1]) || f;
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index ec564e7cb930..9e3ec64896f2 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -208,7 +208,7 @@ static int friq_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
friq_disconnect(pi);
dev_dbg(&pi->dev, "friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->port, pi->mode, e[0], e[1], r);
+ pi->port, pi->mode, e[0], e[1], r);
return (r || (e[0] && e[1]));
}
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 5ea16a247257..c12c8aa9707c 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -257,7 +257,7 @@ static int frpw_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
frpw_disconnect(pi);
dev_dbg(&pi->dev, "frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
- pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
+ pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
return (r || (e[0] && e[1]));
}
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 13/18] pata_parport: simplify log_adapter prints, remove VERSION defines
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (11 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 12/18] pata_parport: use print_hex_* Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 14/18] pata_parport: remove bpck6 verbose parameter Ondrej Zary
` (5 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Merge log_adapter prints to single one, remove version print and
meaningless VERSION defines.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 8 ++------
drivers/ata/pata_parport/bpck.c | 9 +++------
drivers/ata/pata_parport/bpck6.c | 9 ++-------
drivers/ata/pata_parport/comm.c | 8 ++------
drivers/ata/pata_parport/dstr.c | 8 ++------
drivers/ata/pata_parport/epat.c | 9 ++-------
drivers/ata/pata_parport/epia.c | 8 ++------
drivers/ata/pata_parport/fit2.c | 6 ++----
drivers/ata/pata_parport/fit3.c | 9 ++-------
drivers/ata/pata_parport/friq.c | 8 ++------
drivers/ata/pata_parport/frpw.c | 10 +++-------
drivers/ata/pata_parport/kbic.c | 8 ++------
drivers/ata/pata_parport/ktti.c | 7 ++-----
drivers/ata/pata_parport/on20.c | 8 ++------
drivers/ata/pata_parport/on26.c | 8 ++------
15 files changed, 32 insertions(+), 91 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index ccbba14ccab1..8995a4a08b76 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -15,8 +15,6 @@
*/
-#define ATEN_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -124,10 +122,8 @@ static void aten_log_adapter(struct pi_adapter *pi)
{ char *mode_string[2] = {"4-bit","8-bit"};
- dev_info(&pi->dev, "aten %s, ATEN EH-100 at 0x%x, ", ATEN_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "ATEN EH-100 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol aten = {
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index dec24983d140..793ef2c7849e 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -14,8 +14,6 @@
*/
-#define BPCK_VERSION "1.02"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -421,10 +419,9 @@ static void bpck_log_adapter(struct pi_adapter *pi)
bpck_read_eeprom(pi,scratch);
print_hex_dump_bytes("bpck EEPROM: ", DUMP_PREFIX_NONE, scratch, 128);
- dev_info(&pi->dev, "bpck %s, backpack %8.8s unit %d",
- BPCK_VERSION, &scratch[110], pi->unit);
- dev_info(&pi->dev, " at 0x%x, mode %d (%s), delay %d\n", pi->port,
- pi->mode,mode_string[pi->mode],pi->delay);
+ dev_info(&pi->dev, "backpack %8.8s unit %d at 0x%x, mode %d (%s), delay %d\n",
+ &scratch[110], pi->unit, pi->port, pi->mode,
+ mode_string[pi->mode], pi->delay);
}
static struct pi_protocol bpck = {
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 4770e29bfdeb..f144e1b3cacb 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -19,9 +19,6 @@
Version 2.0.2 - fixed version string usage, and made ppc functions static
*/
-
-#define BACKPACK_VERSION "2.0.2"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -179,10 +176,8 @@ static void bpck6_log_adapter(struct pi_adapter *pi)
char *mode_string[5]=
{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- dev_info(&pi->dev, "BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
- BACKPACK_VERSION, pi->port);
- dev_info(&pi->dev, "Unit: %d Mode:%d (%s) Delay %d\n",
- pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
+ dev_info(&pi->dev, "Micro Solutions BACKPACK Drive unit %d at 0x%x, mode:%d (%s), delay %d\n",
+ pi->unit, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static int bpck6_init_proto(struct pi_adapter *pi)
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 7b59eca52185..6e05b50c322c 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -14,8 +14,6 @@
*/
-#define COMM_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -183,10 +181,8 @@ static void comm_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- dev_info(&pi->dev, "comm %s, DataStor Commuter at 0x%x, ", COMM_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "DataStor Commuter at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol comm = {
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index eb6ddceaeb83..64e45eed9588 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -13,8 +13,6 @@
*/
-#define DSTR_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -195,10 +193,8 @@ static void dstr_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- dev_info(&pi->dev, "dstr %s, DataStor EP2000 at 0x%x, ", DSTR_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "DataStor EP2000 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol dstr = {
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index b08ed2f86668..da63fe3b7182 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -16,8 +16,6 @@
*/
-#define EPAT_VERSION "1.02"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -296,11 +294,8 @@ static void epat_log_adapter(struct pi_adapter *pi)
ver = RR(0xb);
epat_disconnect(pi);
- dev_info(&pi->dev, "epat %s, Shuttle EPAT chip %x at 0x%x, ",
- EPAT_VERSION, ver, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "Shuttle EPAT chip %x at 0x%x, mode %d (%s), delay %d\n",
+ ver, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol epat = {
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 32bec3449338..778ebd033ff9 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -17,8 +17,6 @@
*/
-#define EPIA_VERSION "1.02"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -275,10 +273,8 @@ static void epia_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP-16","EPP-32"};
- dev_info(&pi->dev, "epia %s, Shuttle EPIA at 0x%x, ", EPIA_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "Shuttle EPIA at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol epia = {
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index d0a781f04411..3536d8c07955 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -13,8 +13,6 @@
*/
-#define FIT2_VERSION "1.0"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -116,8 +114,8 @@ static void fit2_disconnect(struct pi_adapter *pi)
static void fit2_log_adapter(struct pi_adapter *pi)
{
- dev_info(&pi->dev, "fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
- FIT2_VERSION, pi->port, pi->delay);
+ dev_info(&pi->dev, "FIT 2000 adapter at 0x%x, delay %d\n",
+ pi->port, pi->delay);
}
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index f86da2d478cb..9f5320c750e2 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -17,8 +17,6 @@
*/
-#define FIT3_VERSION "1.0"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -173,11 +171,8 @@ static void fit3_log_adapter(struct pi_adapter *pi)
{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
- dev_info(&pi->dev, "fit3 %s, FIT 3000 adapter at 0x%x, "
- "mode %d (%s), delay %d\n",
- FIT3_VERSION, pi->port,
- pi->mode,mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "FIT 3000 adapter at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol fit3 = {
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 9e3ec64896f2..422146f614d6 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -25,8 +25,6 @@
1.01 GRG 1998.12.20 Added support for soft power switch
*/
-#define FRIQ_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -219,10 +217,8 @@ static void friq_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit",
"EPP-8","EPP-16","EPP-32"};
- dev_info(&pi->dev, "friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ",
- FRIQ_VERSION,pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
+ dev_info(&pi->dev, "Freecom IQ ASIC-2 adapter at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
pi->private = 1;
friq_connect(pi);
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index c12c8aa9707c..068db960861e 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -23,8 +23,6 @@
*/
-#define FRPW_VERSION "1.03"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -268,11 +266,9 @@ static void frpw_log_adapter(struct pi_adapter *pi)
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
"EPP-8","EPP-16","EPP-32"};
- dev_info(&pi->dev, "frpw %s, Freecom (%s) adapter at 0x%x, ",
- FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n",
+ ((pi->private % 2) == 0) ? "Xilinx" : "ASIC",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol frpw = {
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index ea1b931ce20d..3fab7a896e79 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -18,8 +18,6 @@
*/
-#define KBIC_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -234,10 +232,8 @@ static void kbic_log_adapter(struct pi_adapter *pi, char *chip)
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP_16","EPP-32"};
- dev_info(&pi->dev, "kbic %s, KingByte %s at 0x%x, ", KBIC_VERSION, chip, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "KingByte %s at 0x%x, mode %d (%s), delay %d\n",
+ chip, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static void k951_log_adapter(struct pi_adapter *pi)
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index b22c283709de..742051f6ea10 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -9,8 +9,6 @@
*/
-#define KTTI_VERSION "1.0"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -93,9 +91,8 @@ static void ktti_disconnect(struct pi_adapter *pi)
static void ktti_log_adapter(struct pi_adapter *pi)
{
- dev_info(&pi->dev, "ktti %s, KT adapter at 0x%x, delay %d\n",
- KTTI_VERSION, pi->port, pi->delay);
-
+ dev_info(&pi->dev, "KT adapter at 0x%x, delay %d\n",
+ pi->port, pi->delay);
}
static struct pi_protocol ktti = {
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index c76d4fb84c61..9cc8be9fa562 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -12,8 +12,6 @@
*/
-#define ON20_VERSION "1.01"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -115,10 +113,8 @@ static void on20_log_adapter(struct pi_adapter *pi)
{ char *mode_string[2] = {"4-bit","8-bit"};
- dev_info(&pi->dev, "on20 %s, OnSpec 90c20 at 0x%x, ", ON20_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "OnSpec 90c20 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol on20 = {
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index 5406e76ea727..e37f69db5f76 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -16,8 +16,6 @@
*/
-#define ON26_VERSION "1.04"
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -280,10 +278,8 @@ static void on26_log_adapter(struct pi_adapter *pi)
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- dev_info(&pi->dev, "on26 %s, OnSpec 90c26 at 0x%x, ", ON26_VERSION, pi->port);
- dev_info(&pi->dev, "mode %d (%s), delay %d\n", pi->mode,
- mode_string[pi->mode],pi->delay);
-
+ dev_info(&pi->dev, "OnSpec 90c26 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol on26 = {
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 14/18] pata_parport: remove bpck6 verbose parameter
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (12 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 13/18] pata_parport: simplify log_adapter prints, remove VERSION defines Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 15/18] pata_parport: remove verbose parameter from test_proto() Ondrej Zary
` (4 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Remove now useless verbose parameter of bpck6 module.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/bpck6.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index f144e1b3cacb..f0ab30fa739a 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -30,10 +30,6 @@
#include "ppc6lnx.c"
#include <linux/pata_parport.h>
-/* PARAMETERS */
-static bool verbose; /* set this to 1 to see debugging messages and whatnot */
-
-
#define PPCSTRUCT(pi) ((Interface *)(pi->private))
/****************************************************************/
@@ -220,5 +216,4 @@ static struct pi_protocol bpck6 = {
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Micro Solutions Inc.");
MODULE_DESCRIPTION("BACKPACK Protocol module, compatible with PARIDE");
-module_param(verbose, bool, 0644);
module_pata_parport_driver(bpck6);
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 15/18] pata_parport: remove verbose parameter from test_proto()
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (13 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 14/18] pata_parport: remove bpck6 verbose parameter Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 16/18] pata_parport: remove scratch " Ondrej Zary
` (3 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
verbose parameter of test_proto() is now unused, remove it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/bpck.c | 2 +-
drivers/ata/pata_parport/epat.c | 2 +-
drivers/ata/pata_parport/epia.c | 2 +-
drivers/ata/pata_parport/friq.c | 2 +-
drivers/ata/pata_parport/frpw.c | 2 +-
drivers/ata/pata_parport/pata_parport.c | 2 +-
include/linux/pata_parport.h | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 793ef2c7849e..2072e291fd16 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -274,7 +274,7 @@ static void bpck_force_spp(struct pi_adapter *pi)
#define TEST_LEN 16
-static int bpck_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
+static int bpck_test_proto(struct pi_adapter *pi, char *scratch)
{ int i, e, l, h, om;
char buf[TEST_LEN];
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index da63fe3b7182..da3398941f81 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -246,7 +246,7 @@ static void epat_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static int epat_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
+static int epat_test_proto(struct pi_adapter *pi, char *scratch)
{ int k, j, f, cc;
int e[2] = {0,0};
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 778ebd033ff9..a83685ed9dde 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -232,7 +232,7 @@ static void epia_write_block(struct pi_adapter *pi, char *buf, int count)
}
-static int epia_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
+static int epia_test_proto(struct pi_adapter *pi, char *scratch)
{ int j, k, f;
int e[2] = {0,0};
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 422146f614d6..7ace1f7eea34 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -178,7 +178,7 @@ static void friq_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static int friq_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
+static int friq_test_proto(struct pi_adapter *pi, char *scratch)
{ int j, k, r;
int e[2] = {0,0};
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 068db960861e..d04a11889066 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -219,7 +219,7 @@ static int frpw_test_pnp(struct pi_adapter *pi)
a hack :-(
*/
-static int frpw_test_proto(struct pi_adapter *pi, char *scratch, int verbose)
+static int frpw_test_proto(struct pi_adapter *pi, char *scratch)
{ int j, k, r;
int e[2] = {0,0};
diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
index f42a2cafc382..27aa2419af02 100644
--- a/drivers/ata/pata_parport/pata_parport.c
+++ b/drivers/ata/pata_parport/pata_parport.c
@@ -306,7 +306,7 @@ static int pi_test_proto(struct pi_adapter *pi, char *scratch)
parport_claim_or_block(pi->pardev);
if (pi->proto->test_proto)
- res = pi->proto->test_proto(pi, scratch, 1);
+ res = pi->proto->test_proto(pi, scratch);
else
res = default_test_proto(pi, scratch);
parport_release(pi->pardev);
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index c44d30b3e886..e45bb1896003 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -67,7 +67,7 @@ struct pi_protocol {
int (*test_port)(struct pi_adapter *pi);
int (*probe_unit)(struct pi_adapter *pi);
- int (*test_proto)(struct pi_adapter *pi, char *scratch, int verbose);
+ int (*test_proto)(struct pi_adapter *pi, char *scratch);
void (*log_adapter)(struct pi_adapter *pi);
int (*init_proto)(struct pi_adapter *pi);
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 16/18] pata_parport: remove scratch parameter from test_proto()
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (14 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 15/18] pata_parport: remove verbose parameter from test_proto() Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 17/18] pata_parport: remove obsolete changelogs Ondrej Zary
` (2 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Don't pass around a pointer to scratch buffer. Use local buffers in
protocols that need it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/bpck.c | 2 +-
drivers/ata/pata_parport/epat.c | 3 ++-
drivers/ata/pata_parport/epia.c | 3 ++-
drivers/ata/pata_parport/friq.c | 3 ++-
drivers/ata/pata_parport/frpw.c | 3 ++-
drivers/ata/pata_parport/pata_parport.c | 23 +++++++++++------------
include/linux/pata_parport.h | 2 +-
7 files changed, 21 insertions(+), 18 deletions(-)
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 2072e291fd16..ecb98bf0e6de 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -274,7 +274,7 @@ static void bpck_force_spp(struct pi_adapter *pi)
#define TEST_LEN 16
-static int bpck_test_proto(struct pi_adapter *pi, char *scratch)
+static int bpck_test_proto(struct pi_adapter *pi)
{ int i, e, l, h, om;
char buf[TEST_LEN];
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index da3398941f81..26d1b6d438bc 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -246,10 +246,11 @@ static void epat_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static int epat_test_proto(struct pi_adapter *pi, char *scratch)
+static int epat_test_proto(struct pi_adapter *pi)
{ int k, j, f, cc;
int e[2] = {0,0};
+ char scratch[512];
epat_connect(pi);
cc = RR(0xd);
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index a83685ed9dde..101a0d9f1aa6 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -232,10 +232,11 @@ static void epia_write_block(struct pi_adapter *pi, char *buf, int count)
}
-static int epia_test_proto(struct pi_adapter *pi, char *scratch)
+static int epia_test_proto(struct pi_adapter *pi)
{ int j, k, f;
int e[2] = {0,0};
+ char scratch[512];
epia_connect(pi);
for (j=0;j<2;j++) {
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 7ace1f7eea34..9c4a6487b2a9 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -178,10 +178,11 @@ static void friq_disconnect(struct pi_adapter *pi)
w2(pi->saved_r2);
}
-static int friq_test_proto(struct pi_adapter *pi, char *scratch)
+static int friq_test_proto(struct pi_adapter *pi)
{ int j, k, r;
int e[2] = {0,0};
+ char scratch[512];
pi->saved_r0 = r0();
w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index d04a11889066..024b5c0737e0 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -219,10 +219,11 @@ static int frpw_test_pnp(struct pi_adapter *pi)
a hack :-(
*/
-static int frpw_test_proto(struct pi_adapter *pi, char *scratch)
+static int frpw_test_proto(struct pi_adapter *pi)
{ int j, k, r;
int e[2] = {0,0};
+ char scratch[512];
if ((pi->private>>1) != pi->port)
pi->private = frpw_test_pnp(pi) + 2*pi->port;
diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
index 27aa2419af02..77a3e5a3f062 100644
--- a/drivers/ata/pata_parport/pata_parport.c
+++ b/drivers/ata/pata_parport/pata_parport.c
@@ -276,7 +276,7 @@ static void pi_release(struct pi_adapter *pi)
module_put(pi->proto->owner);
}
-static int default_test_proto(struct pi_adapter *pi, char *scratch)
+static int default_test_proto(struct pi_adapter *pi)
{
int j, k;
int e[2] = { 0, 0 };
@@ -300,21 +300,21 @@ static int default_test_proto(struct pi_adapter *pi, char *scratch)
return e[0] && e[1]; /* not here if both > 0 */
}
-static int pi_test_proto(struct pi_adapter *pi, char *scratch)
+static int pi_test_proto(struct pi_adapter *pi)
{
int res;
parport_claim_or_block(pi->pardev);
if (pi->proto->test_proto)
- res = pi->proto->test_proto(pi, scratch);
+ res = pi->proto->test_proto(pi);
else
- res = default_test_proto(pi, scratch);
+ res = default_test_proto(pi);
parport_release(pi->pardev);
return res;
}
-static bool pi_probe_mode(struct pi_adapter *pi, int max, char *scratch)
+static bool pi_probe_mode(struct pi_adapter *pi, int max)
{
int best, range;
@@ -326,7 +326,7 @@ static bool pi_probe_mode(struct pi_adapter *pi, int max, char *scratch)
range = 8;
if (range == 8 && pi->port % 8)
return false;
- return !pi_test_proto(pi, scratch);
+ return !pi_test_proto(pi);
}
best = -1;
for (pi->mode = 0; pi->mode < max; pi->mode++) {
@@ -335,14 +335,14 @@ static bool pi_probe_mode(struct pi_adapter *pi, int max, char *scratch)
range = 8;
if (range == 8 && pi->port % 8)
break;
- if (!pi_test_proto(pi, scratch))
+ if (!pi_test_proto(pi))
best = pi->mode;
}
pi->mode = best;
return best > -1;
}
-static bool pi_probe_unit(struct pi_adapter *pi, int unit, char *scratch)
+static bool pi_probe_unit(struct pi_adapter *pi, int unit)
{
int max, s, e;
@@ -367,14 +367,14 @@ static bool pi_probe_unit(struct pi_adapter *pi, int unit, char *scratch)
for (pi->unit = s; pi->unit < e; pi->unit++) {
if (pi->proto->probe_unit(pi)) {
parport_release(pi->pardev);
- return pi_probe_mode(pi, max, scratch);
+ return pi_probe_mode(pi, max);
}
}
parport_release(pi->pardev);
return false;
}
- return pi_probe_mode(pi, max, scratch);
+ return pi_probe_mode(pi, max);
}
static void pata_parport_dev_release(struct device *dev)
@@ -419,7 +419,6 @@ static struct pi_adapter *pi_init_one(struct parport *parport,
struct pi_protocol *pr, int mode, int unit, int delay)
{
struct pardev_cb par_cb = { };
- char scratch[512];
const struct ata_port_info *ppi[] = { &pata_parport_port_info };
struct ata_host *host;
struct pi_adapter *pi;
@@ -469,7 +468,7 @@ static struct pi_adapter *pi_init_one(struct parport *parport,
if (!pi->pardev)
goto out_module_put;
- if (!pi_probe_unit(pi, unit, scratch)) {
+ if (!pi_probe_unit(pi, unit)) {
dev_info(&pi->dev, "Adapter not found\n");
goto out_unreg_parport;
}
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index e45bb1896003..bbfa4e63ee85 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -67,7 +67,7 @@ struct pi_protocol {
int (*test_port)(struct pi_adapter *pi);
int (*probe_unit)(struct pi_adapter *pi);
- int (*test_proto)(struct pi_adapter *pi, char *scratch);
+ int (*test_proto)(struct pi_adapter *pi);
void (*log_adapter)(struct pi_adapter *pi);
int (*init_proto)(struct pi_adapter *pi);
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 17/18] pata_parport: remove obsolete changelogs
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (15 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 16/18] pata_parport: remove scratch " Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:00 ` [PATCH 18/18] pata_parport: move pata_parport.h to drivers/ata/pata_parport Ondrej Zary
2023-02-14 23:50 ` [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Damien Le Moal
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Remove obsolete changelogs from protocol drivers.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 6 ------
drivers/ata/pata_parport/bpck.c | 7 -------
drivers/ata/pata_parport/bpck6.c | 8 --------
drivers/ata/pata_parport/comm.c | 6 ------
drivers/ata/pata_parport/dstr.c | 6 ------
drivers/ata/pata_parport/epat.c | 7 -------
drivers/ata/pata_parport/epia.c | 7 -------
drivers/ata/pata_parport/friq.c | 5 -----
drivers/ata/pata_parport/frpw.c | 10 ----------
drivers/ata/pata_parport/kbic.c | 6 ------
drivers/ata/pata_parport/on20.c | 6 ------
drivers/ata/pata_parport/on26.c | 9 ---------
12 files changed, 83 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 8995a4a08b76..f0d63b8513e0 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -9,12 +9,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index ecb98bf0e6de..472029a21d59 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -7,13 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto, pi->delay
- 1.02 GRG 1998.08.15 default pi->delay returned to 4
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index f0ab30fa739a..683a11131acd 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -11,14 +11,6 @@
*/
-/*
- This is Ken's linux wrapper for the PPC library
- Version 1.0.0 is the backpack driver for which source is not available
- Version 2.0.0 is the first to have source released
- Version 2.0.1 is the "Cox-ified" source code
- Version 2.0.2 - fixed version string usage, and made ppc functions static
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 6e05b50c322c..0483caa80544 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -8,12 +8,6 @@
use this adapter.
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index 64e45eed9588..c5af7a5fa636 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -7,12 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 26d1b6d438bc..b7085a448301 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -9,13 +9,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 101a0d9f1aa6..63e74c1facba 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -10,13 +10,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.06.17 support older versions of EPIA
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 9c4a6487b2a9..ce605f665ab1 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -20,11 +20,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.12.20 Added support for soft power switch
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 024b5c0737e0..257ad13dec09 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -13,16 +13,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- fix chip detect
- added EPP-16 and EPP-32
- 1.02 GRG 1998.09.23 added hard reset to initialisation process
- 1.03 GRG 1998.12.14 made hard reset conditional
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index 3fab7a896e79..29f4f1e14d21 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -12,12 +12,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index 9cc8be9fa562..6956b91efb47 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -6,12 +6,6 @@
Onspec 90c20 parallel to IDE adapter.
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index e37f69db5f76..1d90eb9b541e 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -7,15 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.09.23 updates for the -E rev chip
- 1.03 GRG 1998.12.14 fix for slave drives
- 1.04 GRG 1998.12.20 yet another bug fix
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 18/18] pata_parport: move pata_parport.h to drivers/ata/pata_parport
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (16 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 17/18] pata_parport: remove obsolete changelogs Ondrej Zary
@ 2023-02-14 23:00 ` Ondrej Zary
2023-02-14 23:50 ` [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Damien Le Moal
18 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-14 23:00 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Now that paride is gone, pata_parport.h does not need to be in
include/linux. Move it to drivers/ata/pata_parport.
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 3 +--
drivers/ata/pata_parport/bpck.c | 3 +--
drivers/ata/pata_parport/bpck6.c | 3 +--
drivers/ata/pata_parport/comm.c | 3 +--
drivers/ata/pata_parport/dstr.c | 3 +--
drivers/ata/pata_parport/epat.c | 3 +--
drivers/ata/pata_parport/epia.c | 3 +--
drivers/ata/pata_parport/fit2.c | 3 +--
drivers/ata/pata_parport/fit3.c | 3 +--
drivers/ata/pata_parport/friq.c | 3 +--
drivers/ata/pata_parport/frpw.c | 3 +--
drivers/ata/pata_parport/kbic.c | 3 +--
drivers/ata/pata_parport/ktti.c | 3 +--
drivers/ata/pata_parport/on20.c | 3 +--
drivers/ata/pata_parport/on26.c | 3 +--
drivers/ata/pata_parport/pata_parport.c | 2 +-
{include/linux => drivers/ata/pata_parport}/pata_parport.h | 0
17 files changed, 16 insertions(+), 31 deletions(-)
rename {include/linux => drivers/ata/pata_parport}/pata_parport.h (100%)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index f0d63b8513e0..1bd248c42f8b 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -16,8 +16,7 @@
#include <linux/wait.h>
#include <linux/types.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88)
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 472029a21d59..1c5035a09554 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -14,8 +14,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#undef r2
#undef w2
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 683a11131acd..964bc688e280 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -18,9 +18,8 @@
#include <linux/types.h>
#include <asm/io.h>
#include <linux/parport.h>
-
#include "ppc6lnx.c"
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define PPCSTRUCT(pi) ((Interface *)(pi->private))
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 0483caa80544..4c2f9ad60ad8 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -15,8 +15,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
/* mode codes: 0 nybble reads, 8-bit writes
1 8-bit reads and writes
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index c5af7a5fa636..2524684be206 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -14,8 +14,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
/* mode codes: 0 nybble reads, 8-bit writes
1 8-bit reads and writes
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index b7085a448301..0e4369dbe48e 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -16,8 +16,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 63e74c1facba..7821e363b143 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -17,8 +17,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
/* mode codes: 0 nybble reads on port 1, 8-bit writes
1 5/3 reads on ports 1 & 2, 8-bit writes
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index 3536d8c07955..fd3b2ce426a5 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -20,8 +20,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index 9f5320c750e2..75df656ac472 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -24,8 +24,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0))
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index ce605f665ab1..b48bfabd1759 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -27,8 +27,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define CMD(x) w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\
w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x);
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 257ad13dec09..5d4bba371b8e 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -20,8 +20,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index 29f4f1e14d21..8213e62f8f00 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -19,8 +19,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define r12w() (delay_p,inw(pi->port+1)&0xffff)
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index 742051f6ea10..4890b1f12348 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -16,8 +16,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index 6956b91efb47..276ace12d490 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -13,8 +13,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define op(f) w2(4);w0(f);w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
#define vl(v) w2(4);w0(v);w2(5);w2(7);w2(5);w2(4);
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index 1d90eb9b541e..dc47a54b121f 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -14,8 +14,7 @@
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
-
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
/* mode codes: 0 nybble reads, 8-bit writes
1 8-bit reads and writes
diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
index 77a3e5a3f062..a1dc639665dc 100644
--- a/drivers/ata/pata_parport/pata_parport.c
+++ b/drivers/ata/pata_parport/pata_parport.c
@@ -6,7 +6,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/parport.h>
-#include <linux/pata_parport.h>
+#include "pata_parport.h"
#define DRV_NAME "pata_parport"
diff --git a/include/linux/pata_parport.h b/drivers/ata/pata_parport/pata_parport.h
similarity index 100%
rename from include/linux/pata_parport.h
rename to drivers/ata/pata_parport/pata_parport.h
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
` (17 preceding siblings ...)
2023-02-14 23:00 ` [PATCH 18/18] pata_parport: move pata_parport.h to drivers/ata/pata_parport Ondrej Zary
@ 2023-02-14 23:50 ` Damien Le Moal
2023-02-15 17:14 ` Sergey Shtylyov
18 siblings, 1 reply; 25+ messages in thread
From: Damien Le Moal @ 2023-02-14 23:50 UTC (permalink / raw)
To: Ondrej Zary
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
On 2/15/23 07:59, Ondrej Zary wrote:
> This patch series fixes two bugs and cleans up pata_parport protocol drivers,
> making the code simpler with no changes in behavior (except logged messages).
>
> Signed-off-by: Ondrej Zary <linux@zary.sk>
Sergey did send you some reviewed-by tags for some of the patches. But I
do not see any in this v2. Did you forget to add the tags to the reviewed
patches ? That is nice to do so that I do not have to keep track of
reviews across series versions...
> ---
> Changes in v2:
> - added two bugfixes (first two patches)
> - addressed Sergey's comments (mostly split patches)
>
> drivers/ata/pata_parport/aten.c | 45 ++++----------
> drivers/ata/pata_parport/bpck.c | 86 ++++++++------------------
> drivers/ata/pata_parport/bpck6.c | 107 ++++++++-------------------------
> drivers/ata/pata_parport/comm.c | 52 +++++-----------
> drivers/ata/pata_parport/dstr.c | 45 ++++----------
> drivers/ata/pata_parport/epat.c | 48 ++++++---------
> drivers/ata/pata_parport/epia.c | 55 +++++------------
> drivers/ata/pata_parport/fit2.c | 37 ++++--------
> drivers/ata/pata_parport/fit3.c | 39 ++++--------
> drivers/ata/pata_parport/friq.c | 56 ++++++-----------
> drivers/ata/pata_parport/frpw.c | 71 ++++++----------------
> drivers/ata/pata_parport/kbic.c | 66 +++++++++-----------
> drivers/ata/pata_parport/ktti.c | 38 ++++--------
> drivers/ata/pata_parport/on20.c | 45 ++++----------
> drivers/ata/pata_parport/on26.c | 52 ++++------------
> drivers/ata/pata_parport/pata_parport.c | 31 +++++-----
> {include/linux => drivers/ata/pata_parport}/pata_parport.h | 41 ++++---------
> 17 files changed, 271 insertions(+), 643 deletions(-)
>
>
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups
2023-02-14 23:50 ` [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Damien Le Moal
@ 2023-02-15 17:14 ` Sergey Shtylyov
0 siblings, 0 replies; 25+ messages in thread
From: Sergey Shtylyov @ 2023-02-15 17:14 UTC (permalink / raw)
To: Damien Le Moal, Ondrej Zary
Cc: Christoph Hellwig, Jens Axboe, Tim Waugh, linux-block,
linux-parport, linux-ide, linux-kernel
On 2/15/23 2:50 AM, Damien Le Moal wrote:
[...]
>> This patch series fixes two bugs and cleans up pata_parport protocol drivers,
>> making the code simpler with no changes in behavior (except logged messages).
>>
>> Signed-off-by: Ondrej Zary <linux@zary.sk>
>
> Sergey did send you some reviewed-by tags for some of the patches. But I
> do not see any in this v2. Did you forget to add the tags to the reviewed
> patches ? That is nice to do so that I do not have to keep track of
> reviews across series versions...
Yes, it would also simplify my further reviews (I have low bandwidth currently
due to being somewhat overload at work)...
>> ---
>> Changes in v2:
>> - added two bugfixes (first two patches)
>> - addressed Sergey's comments (mostly split patches)
Well, you're supposed to be more detailed about what you really
did to the series, preferably listing the changes in each patch (usually
after the --- tearline)...
[...]
MBR, Sergey
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 01/18] pata_parport: fix EPAT C7/C8 Kconfig
2023-02-14 22:59 ` [PATCH 01/18] pata_parport: fix EPAT C7/C8 Kconfig Ondrej Zary
@ 2023-02-15 17:19 ` Sergey Shtylyov
0 siblings, 0 replies; 25+ messages in thread
From: Sergey Shtylyov @ 2023-02-15 17:19 UTC (permalink / raw)
To: Ondrej Zary, Damien Le Moal
Cc: Christoph Hellwig, Jens Axboe, Tim Waugh, linux-block,
linux-parport, linux-ide, linux-kernel
On 2/15/23 1:59 AM, Ondrej Zary wrote:
> CONFIG_PARIDE_EPATC8 was renamed to CONFIG_PATA_PARPORT_EPATC8 but
> epat.c was not updated to reflect that. Update it.
>
> Signed-off-by: Ondrej Zary <linux@zary.sk>
Does the below tag apply here?
Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru>
And here's the usual one:
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
[...]
MBR, Sergey
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 17/18] pata_parport: remove obsolete changelogs
2023-03-06 17:27 [PATCH RESEND v4 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
@ 2023-03-06 17:27 ` Ondrej Zary
0 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-03-06 17:27 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Remove obsolete changelogs from protocol drivers.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 6 ------
drivers/ata/pata_parport/bpck.c | 7 -------
drivers/ata/pata_parport/bpck6.c | 8 --------
drivers/ata/pata_parport/comm.c | 6 ------
drivers/ata/pata_parport/dstr.c | 6 ------
drivers/ata/pata_parport/epat.c | 7 -------
drivers/ata/pata_parport/epia.c | 7 -------
drivers/ata/pata_parport/friq.c | 5 -----
drivers/ata/pata_parport/frpw.c | 10 ----------
drivers/ata/pata_parport/kbic.c | 6 ------
drivers/ata/pata_parport/on20.c | 6 ------
drivers/ata/pata_parport/on26.c | 9 ---------
12 files changed, 83 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 8995a4a08b76..f0d63b8513e0 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -9,12 +9,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index ecb98bf0e6de..472029a21d59 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -7,13 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto, pi->delay
- 1.02 GRG 1998.08.15 default pi->delay returned to 4
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index f0ab30fa739a..683a11131acd 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -11,14 +11,6 @@
*/
-/*
- This is Ken's linux wrapper for the PPC library
- Version 1.0.0 is the backpack driver for which source is not available
- Version 2.0.0 is the first to have source released
- Version 2.0.1 is the "Cox-ified" source code
- Version 2.0.2 - fixed version string usage, and made ppc functions static
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 6e05b50c322c..0483caa80544 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -8,12 +8,6 @@
use this adapter.
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index 64e45eed9588..c5af7a5fa636 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -7,12 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 609614b2c69e..0315f98326f8 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -9,13 +9,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 970532619aeb..77869639773d 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -10,13 +10,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.06.17 support older versions of EPIA
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 1888e8bcb884..8883b3c509cc 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -20,11 +20,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.12.20 Added support for soft power switch
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 484b5b9d31eb..1ef8be79d793 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -13,16 +13,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- fix chip detect
- added EPP-16 and EPP-32
- 1.02 GRG 1998.09.23 added hard reset to initialisation process
- 1.03 GRG 1998.12.14 made hard reset conditional
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index 3fab7a896e79..29f4f1e14d21 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -12,12 +12,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index 9cc8be9fa562..6956b91efb47 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -6,12 +6,6 @@
Onspec 90c20 parallel to IDE adapter.
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index e37f69db5f76..1d90eb9b541e 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -7,15 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.09.23 updates for the -E rev chip
- 1.03 GRG 1998.12.14 fix for slave drives
- 1.04 GRG 1998.12.20 yet another bug fix
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 17/18] pata_parport: remove obsolete changelogs
2023-02-18 22:01 [PATCH v4 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
@ 2023-02-18 22:01 ` Ondrej Zary
0 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-18 22:01 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Remove obsolete changelogs from protocol drivers.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 6 ------
drivers/ata/pata_parport/bpck.c | 7 -------
drivers/ata/pata_parport/bpck6.c | 8 --------
drivers/ata/pata_parport/comm.c | 6 ------
drivers/ata/pata_parport/dstr.c | 6 ------
drivers/ata/pata_parport/epat.c | 7 -------
drivers/ata/pata_parport/epia.c | 7 -------
drivers/ata/pata_parport/friq.c | 5 -----
drivers/ata/pata_parport/frpw.c | 10 ----------
drivers/ata/pata_parport/kbic.c | 6 ------
drivers/ata/pata_parport/on20.c | 6 ------
drivers/ata/pata_parport/on26.c | 9 ---------
12 files changed, 83 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 8995a4a08b76..f0d63b8513e0 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -9,12 +9,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index ecb98bf0e6de..472029a21d59 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -7,13 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto, pi->delay
- 1.02 GRG 1998.08.15 default pi->delay returned to 4
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index f0ab30fa739a..683a11131acd 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -11,14 +11,6 @@
*/
-/*
- This is Ken's linux wrapper for the PPC library
- Version 1.0.0 is the backpack driver for which source is not available
- Version 2.0.0 is the first to have source released
- Version 2.0.1 is the "Cox-ified" source code
- Version 2.0.2 - fixed version string usage, and made ppc functions static
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 6e05b50c322c..0483caa80544 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -8,12 +8,6 @@
use this adapter.
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index 64e45eed9588..c5af7a5fa636 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -7,12 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 609614b2c69e..0315f98326f8 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -9,13 +9,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 970532619aeb..77869639773d 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -10,13 +10,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.06.17 support older versions of EPIA
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 1888e8bcb884..8883b3c509cc 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -20,11 +20,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.12.20 Added support for soft power switch
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 484b5b9d31eb..1ef8be79d793 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -13,16 +13,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- fix chip detect
- added EPP-16 and EPP-32
- 1.02 GRG 1998.09.23 added hard reset to initialisation process
- 1.03 GRG 1998.12.14 made hard reset conditional
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index 3fab7a896e79..29f4f1e14d21 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -12,12 +12,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index 9cc8be9fa562..6956b91efb47 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -6,12 +6,6 @@
Onspec 90c20 parallel to IDE adapter.
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index e37f69db5f76..1d90eb9b541e 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -7,15 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.09.23 updates for the -E rev chip
- 1.03 GRG 1998.12.14 fix for slave drives
- 1.04 GRG 1998.12.20 yet another bug fix
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 17/18] pata_parport: remove obsolete changelogs
2023-02-15 19:45 [PATCH v3 " Ondrej Zary
@ 2023-02-15 19:45 ` Ondrej Zary
0 siblings, 0 replies; 25+ messages in thread
From: Ondrej Zary @ 2023-02-15 19:45 UTC (permalink / raw)
To: Damien Le Moal
Cc: Christoph Hellwig, Sergey Shtylyov, Jens Axboe, Tim Waugh,
linux-block, linux-parport, linux-ide, linux-kernel
Remove obsolete changelogs from protocol drivers.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/ata/pata_parport/aten.c | 6 ------
drivers/ata/pata_parport/bpck.c | 7 -------
drivers/ata/pata_parport/bpck6.c | 8 --------
drivers/ata/pata_parport/comm.c | 6 ------
drivers/ata/pata_parport/dstr.c | 6 ------
drivers/ata/pata_parport/epat.c | 7 -------
drivers/ata/pata_parport/epia.c | 7 -------
drivers/ata/pata_parport/friq.c | 5 -----
drivers/ata/pata_parport/frpw.c | 10 ----------
drivers/ata/pata_parport/kbic.c | 6 ------
drivers/ata/pata_parport/on20.c | 6 ------
drivers/ata/pata_parport/on26.c | 9 ---------
12 files changed, 83 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 8995a4a08b76..f0d63b8513e0 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -9,12 +9,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index ecb98bf0e6de..472029a21d59 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -7,13 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto, pi->delay
- 1.02 GRG 1998.08.15 default pi->delay returned to 4
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index f0ab30fa739a..683a11131acd 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -11,14 +11,6 @@
*/
-/*
- This is Ken's linux wrapper for the PPC library
- Version 1.0.0 is the backpack driver for which source is not available
- Version 2.0.0 is the first to have source released
- Version 2.0.1 is the "Cox-ified" source code
- Version 2.0.2 - fixed version string usage, and made ppc functions static
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 6e05b50c322c..0483caa80544 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -8,12 +8,6 @@
use this adapter.
*/
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index 64e45eed9588..c5af7a5fa636 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -7,12 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 26d1b6d438bc..b7085a448301 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -9,13 +9,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 101a0d9f1aa6..63e74c1facba 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -10,13 +10,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.06.17 support older versions of EPIA
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 9c4a6487b2a9..ce605f665ab1 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -20,11 +20,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.12.20 Added support for soft power switch
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 024b5c0737e0..257ad13dec09 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -13,16 +13,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- fix chip detect
- added EPP-16 and EPP-32
- 1.02 GRG 1998.09.23 added hard reset to initialisation process
- 1.03 GRG 1998.12.14 made hard reset conditional
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index 3fab7a896e79..29f4f1e14d21 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -12,12 +12,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index 9cc8be9fa562..6956b91efb47 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -6,12 +6,6 @@
Onspec 90c20 parallel to IDE adapter.
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index e37f69db5f76..1d90eb9b541e 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -7,15 +7,6 @@
*/
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.09.23 updates for the -E rev chip
- 1.03 GRG 1998.12.14 fix for slave drives
- 1.04 GRG 1998.12.20 yet another bug fix
-
-*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
--
Ondrej Zary
^ permalink raw reply related [flat|nested] 25+ messages in thread
end of thread, other threads:[~2023-03-06 17:54 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-14 22:59 [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
2023-02-14 22:59 ` [PATCH 01/18] pata_parport: fix EPAT C7/C8 Kconfig Ondrej Zary
2023-02-15 17:19 ` Sergey Shtylyov
2023-02-14 22:59 ` [PATCH 02/18] pata_parport: probe all units automatically Ondrej Zary
2023-02-14 22:59 ` [PATCH 03/18] pata_parport: Remove pi_swab16 and pi_swab32 Ondrej Zary
2023-02-14 22:59 ` [PATCH 04/18] pata_parport: remove useless printks at module_init of bpck6 Ondrej Zary
2023-02-14 22:59 ` [PATCH 05/18] pata_parport: Introduce module_pata_parport_driver macro Ondrej Zary
2023-02-14 22:59 ` [PATCH 06/18] pata_parport: remove devtype from struct pi_adapter Ondrej Zary
2023-02-14 22:59 ` [PATCH 07/18] pata_parport: remove device " Ondrej Zary
2023-02-14 23:00 ` [PATCH 08/18] pata_parport: remove typedef struct PIA Ondrej Zary
2023-02-14 23:00 ` [PATCH 09/18] pata_parport: remove verbose parameter from log_adapter() Ondrej Zary
2023-02-14 23:00 ` [PATCH 10/18] pata_parport: remove scratch " Ondrej Zary
2023-02-14 23:00 ` [PATCH 11/18] pata_parport: use dev_* instead of printk Ondrej Zary
2023-02-14 23:00 ` [PATCH 12/18] pata_parport: use print_hex_* Ondrej Zary
2023-02-14 23:00 ` [PATCH 13/18] pata_parport: simplify log_adapter prints, remove VERSION defines Ondrej Zary
2023-02-14 23:00 ` [PATCH 14/18] pata_parport: remove bpck6 verbose parameter Ondrej Zary
2023-02-14 23:00 ` [PATCH 15/18] pata_parport: remove verbose parameter from test_proto() Ondrej Zary
2023-02-14 23:00 ` [PATCH 16/18] pata_parport: remove scratch " Ondrej Zary
2023-02-14 23:00 ` [PATCH 17/18] pata_parport: remove obsolete changelogs Ondrej Zary
2023-02-14 23:00 ` [PATCH 18/18] pata_parport: move pata_parport.h to drivers/ata/pata_parport Ondrej Zary
2023-02-14 23:50 ` [PATCH v2 0/18] pata_parport: protocol drivers fixes and cleanups Damien Le Moal
2023-02-15 17:14 ` Sergey Shtylyov
2023-02-15 19:45 [PATCH v3 " Ondrej Zary
2023-02-15 19:45 ` [PATCH 17/18] pata_parport: remove obsolete changelogs Ondrej Zary
2023-02-18 22:01 [PATCH v4 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
2023-02-18 22:01 ` [PATCH 17/18] pata_parport: remove obsolete changelogs Ondrej Zary
2023-03-06 17:27 [PATCH RESEND v4 0/18] pata_parport: protocol drivers fixes and cleanups Ondrej Zary
2023-03-06 17:27 ` [PATCH 17/18] pata_parport: remove obsolete changelogs Ondrej Zary
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).