linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Fabrice Gasnier <fabrice.gasnier@st.com>
To: <jic23@kernel.org>
Cc: <vilhelm.gray@gmail.com>, <alexandre.torgue@st.com>,
	<mcoquelin.stm32@gmail.com>, <benjamin.gaignard@st.com>,
	<fabrice.gasnier@st.com>, <linux-iio@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2] counter: stm32-timer-cnt: add power management support
Date: Mon, 10 Feb 2020 18:19:58 +0100	[thread overview]
Message-ID: <1581355198-30428-1-git-send-email-fabrice.gasnier@st.com> (raw)

Add suspend/resume PM sleep ops. When going to low power, enforce the
counter isn't active. Gracefully restore its state upon resume in case
it's been left enabled prior to suspend.

Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
Changes in v2:
- Don't refuse to suspend in case the counter has been left enabled.
  Gracefully disable it and restore its state upon resume.
---
 drivers/counter/stm32-timer-cnt.c | 63 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
index 3eafcce..50496f4 100644
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -12,6 +12,7 @@
 #include <linux/iio/types.h>
 #include <linux/mfd/stm32-timers.h>
 #include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 
 #define TIM_CCMR_CCXS	(BIT(8) | BIT(0))
@@ -20,11 +21,20 @@
 #define TIM_CCER_MASK	(TIM_CCER_CC1P | TIM_CCER_CC1NP | \
 			 TIM_CCER_CC2P | TIM_CCER_CC2NP)
 
+struct stm32_timer_regs {
+	u32 cr1;
+	u32 cnt;
+	u32 smcr;
+	u32 arr;
+};
+
 struct stm32_timer_cnt {
 	struct counter_device counter;
 	struct regmap *regmap;
 	struct clk *clk;
 	u32 ceiling;
+	bool enabled;
+	struct stm32_timer_regs bak;
 };
 
 /**
@@ -224,6 +234,9 @@ static ssize_t stm32_count_enable_write(struct counter_device *counter,
 			clk_disable(priv->clk);
 	}
 
+	/* Keep enabled state to properly handle low power states */
+	priv->enabled = enable;
+
 	return len;
 }
 
@@ -358,10 +371,59 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
 	priv->counter.num_signals = ARRAY_SIZE(stm32_signals);
 	priv->counter.priv = priv;
 
+	platform_set_drvdata(pdev, priv);
+
 	/* Register Counter device */
 	return devm_counter_register(dev, &priv->counter);
 }
 
+static int __maybe_unused stm32_timer_cnt_suspend(struct device *dev)
+{
+	struct stm32_timer_cnt *priv = dev_get_drvdata(dev);
+
+	/* Only take care of enabled counter: don't disturb other MFD child */
+	if (priv->enabled) {
+		/* Backup registers that may get lost in low power mode */
+		regmap_read(priv->regmap, TIM_SMCR, &priv->bak.smcr);
+		regmap_read(priv->regmap, TIM_ARR, &priv->bak.arr);
+		regmap_read(priv->regmap, TIM_CNT, &priv->bak.cnt);
+		regmap_read(priv->regmap, TIM_CR1, &priv->bak.cr1);
+
+		/* Disable the counter */
+		regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
+		clk_disable(priv->clk);
+	}
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_timer_cnt_resume(struct device *dev)
+{
+	struct stm32_timer_cnt *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
+
+	if (priv->enabled) {
+		clk_enable(priv->clk);
+
+		/* Restore registers that may have been lost */
+		regmap_write(priv->regmap, TIM_SMCR, priv->bak.smcr);
+		regmap_write(priv->regmap, TIM_ARR, priv->bak.arr);
+		regmap_write(priv->regmap, TIM_CNT, priv->bak.cnt);
+
+		/* Also re-enables the counter */
+		regmap_write(priv->regmap, TIM_CR1, priv->bak.cr1);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_timer_cnt_pm_ops, stm32_timer_cnt_suspend,
+			 stm32_timer_cnt_resume);
+
 static const struct of_device_id stm32_timer_cnt_of_match[] = {
 	{ .compatible = "st,stm32-timer-counter", },
 	{},
@@ -373,6 +435,7 @@ static struct platform_driver stm32_timer_cnt_driver = {
 	.driver = {
 		.name = "stm32-timer-counter",
 		.of_match_table = stm32_timer_cnt_of_match,
+		.pm = &stm32_timer_cnt_pm_ops,
 	},
 };
 module_platform_driver(stm32_timer_cnt_driver);
-- 
2.7.4


             reply	other threads:[~2020-02-10 17:20 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-10 17:19 Fabrice Gasnier [this message]
2020-02-10 17:45 ` [PATCH v2] counter: stm32-timer-cnt: add power management support William Breathitt Gray
2020-02-11 10:54   ` Fabrice Gasnier
2020-02-11 22:30     ` William Breathitt Gray
2020-02-14 12:45 ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1581355198-30428-1-git-send-email-fabrice.gasnier@st.com \
    --to=fabrice.gasnier@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=benjamin.gaignard@st.com \
    --cc=jic23@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).