linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jishnu Prakash <jprakash@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	mka@chromium.org, linus.walleij@linaro.org,
	Jonathan.Cameron@huawei.com, andy.shevchenko@gmail.com,
	amit.kucheria@verdurent.com, smohanad@codeaurora.org,
	kgunda@codeaurora.org, aghayal@codeaurora.org,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	linux-arm-msm@vger.kernel.org, linux-iio@vger.kernel.org
Cc: linux-arm-msm-owner@vger.kernel.org,
	Jishnu Prakash <jprakash@codeaurora.org>
Subject: [PATCH V5 5/5] iio: adc: Clean up ADC code common to PMIC5 and PMIC7
Date: Fri, 22 May 2020 19:54:12 +0530	[thread overview]
Message-ID: <1590157452-27179-6-git-send-email-jprakash@codeaurora.org> (raw)
In-Reply-To: <1590157452-27179-1-git-send-email-jprakash@codeaurora.org>

This commit includes the following changes:

Add a common function used for read_raw callback for both PMIC5
and PMIC7 ADCs.

Add exit function for ADC.

Add info_property under adc_data to more efficiently distinguish
PMIC5 and PMIC7 ADCs.

Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
---
 drivers/iio/adc/qcom-spmi-adc5.c   | 81 +++++++++++++++++++++-----------------
 drivers/iio/adc/qcom-vadc-common.h |  1 +
 2 files changed, 46 insertions(+), 36 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index 11eb97c..0208da3 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -167,8 +167,6 @@ static const struct vadc_prescale_ratio adc5_prescale_ratios[] = {
 	{.num =  1, .den = 16}
 };
 
-static const struct adc5_data adc7_data_pmic;
-
 static int adc5_read(struct adc5_chip *adc, u16 offset, u8 *data, int len)
 {
 	return regmap_bulk_read(adc->regmap, adc->base + offset, data, len);
@@ -452,6 +450,13 @@ static int adc7_do_conversion(struct adc5_chip *adc,
 	return ret;
 }
 
+struct adc_do_conversion {
+	int (*adc_do_conversion)(struct adc5_chip *adc,
+			struct adc5_channel_prop *prop,
+			struct iio_chan_spec const *chan,
+			u16 *data_volt, u16 *data_cur);
+};
+
 static irqreturn_t adc5_isr(int irq, void *dev_id)
 {
 	struct adc5_chip *adc = dev_id;
@@ -490,9 +495,9 @@ static int adc7_of_xlate(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
-static int adc5_read_raw(struct iio_dev *indio_dev,
+static int adc_read_raw_common(struct iio_dev *indio_dev,
 			 struct iio_chan_spec const *chan, int *val, int *val2,
-			 long mask)
+			 long mask, struct adc_do_conversion do_conv)
 {
 	struct adc5_chip *adc = iio_priv(indio_dev);
 	struct adc5_channel_prop *prop;
@@ -503,8 +508,8 @@ static int adc5_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_PROCESSED:
-		ret = adc5_do_conversion(adc, prop, chan,
-				&adc_code_volt, &adc_code_cur);
+		ret = do_conv.adc_do_conversion(adc, prop, chan,
+					&adc_code_volt, &adc_code_cur);
 		if (ret)
 			return ret;
 
@@ -521,36 +526,26 @@ static int adc5_read_raw(struct iio_dev *indio_dev,
 	}
 }
 
-static int adc7_read_raw(struct iio_dev *indio_dev,
+static int adc5_read_raw(struct iio_dev *indio_dev,
 			 struct iio_chan_spec const *chan, int *val, int *val2,
 			 long mask)
 {
-	struct adc5_chip *adc = iio_priv(indio_dev);
-	struct adc5_channel_prop *prop;
-	u16 adc_code_volt, adc_code_cur;
-	int ret;
-
-	prop = &adc->chan_props[chan->address];
+	struct adc_do_conversion do_conv;
 
-	switch (mask) {
-	case IIO_CHAN_INFO_PROCESSED:
-		ret = adc7_do_conversion(adc, prop, chan,
-					&adc_code_volt, &adc_code_cur);
-		if (ret)
-			return ret;
-
-		ret = qcom_adc5_hw_scale(prop->scale_fn_type,
-			&adc5_prescale_ratios[prop->prescale],
-			adc->data,
-			adc_code_volt, val);
+	do_conv.adc_do_conversion = adc5_do_conversion;
+	return adc_read_raw_common(indio_dev, chan, val, val2,
+				mask, do_conv);
+}
 
-		if (ret)
-			return ret;
+static int adc7_read_raw(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan, int *val, int *val2,
+			 long mask)
+{
+	struct adc_do_conversion do_conv;
 
-		return IIO_VAL_INT;
-	default:
-		return -EINVAL;
-	}
+	do_conv.adc_do_conversion = adc7_do_conversion;
+	return adc_read_raw_common(indio_dev, chan, val, val2,
+				mask, do_conv);
 }
 
 static const struct iio_info adc5_info = {
@@ -706,7 +701,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 
 	/* virtual channel number = sid << 8 | channel number */
 
-	if (adc->data == &adc7_data_pmic) {
+	if (adc->data->info == &adc7_info) {
 		sid = chan >> ADC_CHANNEL_OFFSET;
 		chan = chan & ADC_CHANNEL_MASK;
 	}
@@ -772,7 +767,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 		/* Digital controller >= 5.3 have hw_settle_2 option */
 		if ((dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR &&
 			dig_version[1] >= ADC5_HW_SETTLE_DIFF_MAJOR) ||
-			adc->data == &adc7_data_pmic)
+			adc->data->info == &adc7_info)
 			ret = adc5_hw_settle_time_from_dt(value,
 							data->hw_settle_2);
 		else
@@ -822,6 +817,7 @@ static const struct adc5_data adc5_data_pmic = {
 	.full_scale_code_volt = 0x70e4,
 	.full_scale_code_cur = 0x2710,
 	.adc_chans = adc5_chans_pmic,
+	.info = &adc5_info,
 	.decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
 				{250, 420, 840},
 	.hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
@@ -835,6 +831,7 @@ static const struct adc5_data adc5_data_pmic = {
 static const struct adc5_data adc7_data_pmic = {
 	.full_scale_code_volt = 0x70e4,
 	.adc_chans = adc7_chans_pmic,
+	.info = &adc7_info,
 	.decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
 				{85, 340, 1360},
 	.hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
@@ -847,6 +844,7 @@ static const struct adc5_data adc5_data_pmic_rev2 = {
 	.full_scale_code_volt = 0x4000,
 	.full_scale_code_cur = 0x1800,
 	.adc_chans = adc5_chans_rev2,
+	.info = &adc5_info,
 	.decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
 				{256, 512, 1024},
 	.hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
@@ -961,10 +959,7 @@ static int adc5_probe(struct platform_device *pdev)
 	adc->dev = dev;
 	adc->base = reg;
 
-	if (of_device_is_compatible(node, "qcom,spmi-adc7"))
-		indio_dev->info = &adc7_info;
-	else
-		indio_dev->info = &adc5_info;
+	platform_set_drvdata(pdev, adc);
 
 	init_completion(&adc->complete);
 	mutex_init(&adc->lock);
@@ -975,6 +970,8 @@ static int adc5_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	indio_dev->info = adc->data->info;
+
 	irq_eoc = platform_get_irq(pdev, 0);
 	if (irq_eoc < 0) {
 		if (irq_eoc == -EPROBE_DEFER || irq_eoc == -EINVAL)
@@ -987,6 +984,8 @@ static int adc5_probe(struct platform_device *pdev)
 			return ret;
 	}
 
+	adc->irq_eoc = irq_eoc;
+
 	indio_dev->dev.parent = dev;
 	indio_dev->dev.of_node = node;
 	indio_dev->name = pdev->name;
@@ -997,12 +996,22 @@ static int adc5_probe(struct platform_device *pdev)
 	return devm_iio_device_register(dev, indio_dev);
 }
 
+static int adc5_exit(struct platform_device *pdev)
+{
+	struct adc5_chip *adc = platform_get_drvdata(pdev);
+
+	if (adc->irq_eoc >= 0)
+		disable_irq(adc->irq_eoc);
+	return 0;
+}
+
 static struct platform_driver adc5_driver = {
 	.driver = {
 		.name = "qcom-spmi-adc5.c",
 		.of_match_table = adc5_match_table,
 	},
 	.probe = adc5_probe,
+	.remove = adc5_exit,
 };
 module_platform_driver(adc5_driver);
 
diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
index f10250b..17b2fc4 100644
--- a/drivers/iio/adc/qcom-vadc-common.h
+++ b/drivers/iio/adc/qcom-vadc-common.h
@@ -150,6 +150,7 @@ struct adc5_data {
 	const u32	full_scale_code_volt;
 	const u32	full_scale_code_cur;
 	const struct adc5_channels *adc_chans;
+	const struct iio_info *info;
 	unsigned int	*decimation;
 	unsigned int	*hw_settle_1;
 	unsigned int	*hw_settle_2;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2020-05-22 14:25 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1590157452-27179-1-git-send-email-jprakash@codeaurora.org>
2020-05-22 14:24 ` [PATCH V5 1/5] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format Jishnu Prakash
2020-05-22 14:24 ` [PATCH V5 2/5] iio: adc: Add PMIC7 ADC bindings Jishnu Prakash
2020-05-22 14:24 ` [PATCH V5 3/5] iio: adc: Add support for PMIC7 ADC Jishnu Prakash
2020-05-22 15:37   ` Andy Shevchenko
2020-05-22 15:41     ` Andy Shevchenko
2020-05-28 16:47     ` Jishnu Prakash
2020-05-24 11:59   ` Jonathan Cameron
2020-05-28 16:47     ` Jishnu Prakash
2020-05-22 14:24 ` [PATCH V5 4/5] iio: adc: Update debug prints Jishnu Prakash
2020-05-22 15:39   ` Andy Shevchenko
2020-05-22 14:24 ` Jishnu Prakash [this message]
2020-05-22 15:41   ` [PATCH V5 5/5] iio: adc: Clean up ADC code common to PMIC5 and PMIC7 Andy Shevchenko
2020-05-28 16:49     ` Jishnu Prakash
2020-05-24 12:04   ` Jonathan Cameron
2020-05-28 16:50     ` Jishnu Prakash

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1590157452-27179-6-git-send-email-jprakash@codeaurora.org \
    --to=jprakash@codeaurora.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=aghayal@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=amit.kucheria@verdurent.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=kgunda@codeaurora.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=pmeerw@pmeerw.net \
    --cc=smohanad@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).