linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brian Masney <masneyb@onstation.org>
To: jic23@kernel.org, robh+dt@kernel.org
Cc: lars@metafoo.de, pmeerw@pmeerw.net, mark.rutland@arm.com,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/2] dt-bindings: iio: tsl2772: convert bindings to YAML format
Date: Thu, 25 Apr 2019 19:03:13 -0400	[thread overview]
Message-ID: <20190425230314.26000-1-masneyb@onstation.org> (raw)

Convert the tsl2772 device tree bindings to the new YAML format.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
Changes since v2:
- Remove allof from led-max-microamp. Split out enum list from [] to
  individual lines for consistency with the compatible attribute.
- Change 'proximity-sensor@39' in example to 'sensor@39'.

Changes since v1:
- Dropped description from reg and interrupts properties.
- Dropped $ref from led-max-microamp, vdd-supply, and vddio-supply.
- Changed 'tsl2772@39' in example to 'proximity-sensor@39'

 .../devicetree/bindings/iio/light/tsl2772.txt | 42 ----------
 .../bindings/iio/light/tsl2772.yaml           | 83 +++++++++++++++++++
 2 files changed, 83 insertions(+), 42 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.txt
 create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.yaml

diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
deleted file mode 100644
index 1c5e6f17a1df..000000000000
--- a/Documentation/devicetree/bindings/iio/light/tsl2772.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* AMS/TAOS ALS and proximity sensor
-
-Required properties:
-
-  - compatible: Should be one of
-		"amstaos,tsl2571"
-		"amstaos,tsl2671"
-		"amstaos,tmd2671"
-		"amstaos,tsl2771"
-		"amstaos,tmd2771"
-		"amstaos,tsl2572"
-		"amstaos,tsl2672"
-		"amstaos,tmd2672"
-		"amstaos,tsl2772"
-		"amstaos,tmd2772"
-		"avago,apds9930"
-  - reg: the I2C address of the device
-
-Optional properties:
-
-  - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1>
-                               are the only valid values.
-  - led-max-microamp - current for the proximity LED. Must be 100000, 50000,
-                       25000, or 13000.
-  - vdd-supply: phandle to the regulator that provides power to the sensor.
-  - vddio-supply: phandle to the regulator that provides power to the bus.
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-Example:
-
-tsl2772@39 {
-	compatible = "amstaos,tsl2772";
-	reg = <0x39>;
-	interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
-	vdd-supply = <&pm8941_l17>;
-	vddio-supply = <&pm8941_lvs1>;
-	amstaos,proximity-diodes = <0>;
-	led-max-microamp = <100000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
new file mode 100644
index 000000000000..ed2c3d5eadf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  Ambient light sensing and proximity detection with an i2c interface.
+  https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2571
+      - amstaos,tsl2671
+      - amstaos,tmd2671
+      - amstaos,tsl2771
+      - amstaos,tmd2771
+      - amstaos,tsl2572
+      - amstaos,tsl2672
+      - amstaos,tmd2672
+      - amstaos,tsl2772
+      - amstaos,tmd2772
+      - avago,apds9930
+
+  reg:
+    maxItems: 1
+
+  amstaos,proximity-diodes:
+    description: Proximity diodes to enable
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
+
+  interrupts:
+    maxItems: 1
+
+  led-max-microamp:
+    description: Current for the proximity LED
+    enum:
+      - 13000
+      - 25000
+      - 50000
+      - 100000
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@39 {
+                compatible = "amstaos,tsl2772";
+                reg = <0x39>;
+                interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+                vdd-supply = <&pm8941_l17>;
+                vddio-supply = <&pm8941_lvs1>;
+                amstaos,proximity-diodes = <0>;
+                led-max-microamp = <100000>;
+        };
+    };
+...
-- 
2.20.1


             reply	other threads:[~2019-04-25 23:03 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-25 23:03 Brian Masney [this message]
2019-04-25 23:03 ` [PATCH v3 2/2] dt-bindings: iio: tsl2583: convert bindings to YAML format Brian Masney
2019-04-27 13:03   ` Jonathan Cameron
2019-04-26 13:20 ` [PATCH v3 1/2] dt-bindings: iio: tsl2772: " Rob Herring
2019-04-27 13:05   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190425230314.26000-1-masneyb@onstation.org \
    --to=masneyb@onstation.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).