linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gwendal Grignou <gwendal@chromium.org>
To: enric.balletbo@collabora.com, bleung@chromium.org,
	groeck@chromium.org, lee.jones@linaro.org, jic23@kernel.org,
	broonie@kernel.org, cychiang@chromium.org, tiwai@suse.com
Cc: linux-iio@vger.kernel.org, alsa-devel@alsa-project.org,
	Gwendal Grignou <gwendal@chromium.org>
Subject: [PATCH v2 30/30] mfd: cros_ec: Update I2S API
Date: Fri,  3 May 2019 15:02:33 -0700	[thread overview]
Message-ID: <20190503220233.64546-31-gwendal@chromium.org> (raw)
In-Reply-To: <20190503220233.64546-1-gwendal@chromium.org>

Improve I2S API.
Rename ec_response_codec_gain into ec_codec_i2s_gain,
update caller accordlingly.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 44 +++++++++++++---------------
 sound/soc/codecs/cros_ec_codec.c     |  8 ++---
 2 files changed, 24 insertions(+), 28 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index fc8babce1576..fa397722f17e 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -4471,6 +4471,7 @@ enum mkbp_cec_event {
 /* Commands for I2S recording on audio codec. */
 
 #define EC_CMD_CODEC_I2S 0x00BC
+#define EC_WOV_I2S_SAMPLE_RATE 48000
 
 enum ec_codec_i2s_subcmd {
 	EC_CODEC_SET_SAMPLE_DEPTH = 0x0,
@@ -4480,6 +4481,7 @@ enum ec_codec_i2s_subcmd {
 	EC_CODEC_I2S_SET_CONFIG = 0x4,
 	EC_CODEC_I2S_SET_TDM_CONFIG = 0x5,
 	EC_CODEC_I2S_SET_BCLK = 0x6,
+	EC_CODEC_I2S_SUBCMD_COUNT = 0x7,
 };
 
 enum ec_sample_depth_value {
@@ -4496,6 +4498,21 @@ enum ec_i2s_config {
 	EC_DAI_FMT_PCM_TDM = 5,
 };
 
+/*
+ * For subcommand EC_CODEC_GET_GAIN.
+ */
+struct __ec_align1 ec_codec_i2s_gain {
+	uint8_t left;
+	uint8_t right;
+};
+
+struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
+	int16_t ch0_delay; /* 0 to 496 */
+	int16_t ch1_delay; /* -1 to 496 */
+	uint8_t adjacent_to_ch0;
+	uint8_t adjacent_to_ch1;
+};
+
 struct __ec_todo_packed ec_param_codec_i2s {
 	/* enum ec_codec_i2s_subcmd */
 	uint8_t cmd;
@@ -4510,10 +4527,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
 		 * EC_CODEC_SET_GAIN
 		 * Value should be 0~43 for both channels.
 		 */
-		struct __ec_align1 ec_param_codec_i2s_set_gain {
-			uint8_t left;
-			uint8_t right;
-		} gain;
+		struct ec_codec_i2s_gain gain;
 
 		/*
 		 * EC_CODEC_I2S_ENABLE
@@ -4522,7 +4536,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
 		uint8_t i2s_enable;
 
 		/*
-		 * EC_CODEC_I2S_SET_COFNIG
+		 * EC_CODEC_I2S_SET_CONFIG
 		 * Value should be one of ec_i2s_config.
 		 */
 		uint8_t i2s_config;
@@ -4531,18 +4545,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
 		 * EC_CODEC_I2S_SET_TDM_CONFIG
 		 * Value should be one of ec_i2s_config.
 		 */
-		struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
-			/*
-			 * 0 to 496
-			 */
-			int16_t ch0_delay;
-			/*
-			 * -1 to 496
-			 */
-			int16_t ch1_delay;
-			uint8_t adjacent_to_ch0;
-			uint8_t adjacent_to_ch1;
-		} tdm_param;
+		struct ec_param_codec_i2s_tdm tdm_param;
 
 		/*
 		 * EC_CODEC_I2S_SET_BCLK
@@ -4551,13 +4554,6 @@ struct __ec_todo_packed ec_param_codec_i2s {
 	};
 };
 
-/*
- * For subcommand EC_CODEC_GET_GAIN.
- */
-struct ec_response_codec_gain {
-	uint8_t left;
-	uint8_t right;
-} __ec_align1;
 
 /*****************************************************************************/
 /* System commands */
diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
index 99a3af8a15ff..87830ed5ebf4 100644
--- a/sound/soc/codecs/cros_ec_codec.c
+++ b/sound/soc/codecs/cros_ec_codec.c
@@ -38,21 +38,21 @@ static const DECLARE_TLV_DB_SCALE(ec_mic_gain_tlv, 0, 100, 0);
 
 static int ec_command_get_gain(struct snd_soc_component *component,
 			       struct ec_param_codec_i2s *param,
-			       struct ec_response_codec_gain *resp)
+			       struct ec_codec_i2s_gain *resp)
 {
 	struct cros_ec_codec_data *codec_data =
 		snd_soc_component_get_drvdata(component);
 	struct cros_ec_device *ec_device = codec_data->ec_device;
 	u8 buffer[sizeof(struct cros_ec_command) +
 		  max(sizeof(struct ec_param_codec_i2s),
-		      sizeof(struct ec_response_codec_gain))];
+		      sizeof(struct ec_codec_i2s_gain))];
 	struct cros_ec_command *msg = (struct cros_ec_command *)&buffer;
 	int ret;
 
 	msg->version = 0;
 	msg->command = EC_CMD_CODEC_I2S;
 	msg->outsize = sizeof(struct ec_param_codec_i2s);
-	msg->insize = sizeof(struct ec_response_codec_gain);
+	msg->insize = sizeof(struct ec_codec_i2s_gain);
 
 	memcpy(msg->data, param, msg->outsize);
 
@@ -226,7 +226,7 @@ static int get_ec_mic_gain(struct snd_soc_component *component,
 			   u8 *left, u8 *right)
 {
 	struct ec_param_codec_i2s param;
-	struct ec_response_codec_gain resp;
+	struct ec_codec_i2s_gain resp;
 	int ret;
 
 	param.cmd = EC_CODEC_GET_GAIN;
-- 
2.21.0.1020.gf2820cf01a-goog


  parent reply	other threads:[~2019-05-03 22:03 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-03 22:02 [PATCH v2 00/30] Update cros_ec_commands.h Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 01/30] mfd: cros_ec: Update license term Gwendal Grignou
2019-05-05 15:46   ` Jonathan Cameron
2019-05-03 22:02 ` [PATCH v2 02/30] mfd: cros_ec: Zero BUILD_ macro Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 03/30] mfd: cros_ec: set comments properly Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 04/30] mfd: cros_ec: add ec_align macros Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 06/30] mfd: cros_ec: use BIT macro Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 07/30] mfd: cros_ec: Update ACPI interface definition Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 08/30] mfd: cros_ec: move HDMI CEC API definition Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 09/30] mfd: cros_ec: Remove zero-size structs Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 10/30] mfd: cros_ec: Add Flash V2 commands API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 11/30] mfd: cros_ec: Add PWM_SET_DUTY API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 12/30] mfd: cros_ec: Add lightbar v2 API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 13/30] mfd: cros_ec: Expand hash API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 14/30] mfd: cros_ec: Add EC transport protocol v4 Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 15/30] mfd: cros_ec: Complete MEMS sensor API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 16/30] mfd: cros_ec: Fix event processing API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 17/30] mfd: cros_ec: Add fingerprint API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 18/30] mfd: cros_ec: Fix temperature API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 19/30] mfd: cros_ec: Complete Power and USB PD API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 20/30] mfd: cros_ec: Add API for keyboard testing Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 21/30] mfd: cros_ec: Add Hibernate API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 22/30] mfd: cros_ec: Add Smart Battery Firmware update API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 23/30] mfd: cros_ec: Add I2C passthru protection API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 24/30] mfd: cros_ec: Add API for EC-EC communication Gwendal Grignou
2019-05-08 23:22   ` Benson Leung
2019-05-03 22:02 ` [PATCH v2 25/30] mfd: cros_ec: Add API for Touchpad support Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 26/30] mfd: cros_ec: Add API for Fingerprint support Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 27/30] mfd: cros_ec: Add API for rwsig Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 28/30] mfd: cros_ec: Add SKU ID and Secure storage API Gwendal Grignou
2019-05-03 22:02 ` [PATCH v2 29/30] mfd: cros_ec: Add Management API entry points Gwendal Grignou
2019-05-03 22:02 ` Gwendal Grignou [this message]
2019-05-07  9:50   ` [PATCH v2 30/30] mfd: cros_ec: Update I2S API Cheng-yi Chiang
2019-05-07  9:44 ` [PATCH v2 00/30] Update cros_ec_commands.h Lee Jones
2019-05-08 23:19   ` Benson Leung
2019-05-09  6:11     ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190503220233.64546-31-gwendal@chromium.org \
    --to=gwendal@chromium.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bleung@chromium.org \
    --cc=broonie@kernel.org \
    --cc=cychiang@chromium.org \
    --cc=enric.balletbo@collabora.com \
    --cc=groeck@chromium.org \
    --cc=jic23@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).