From: Jonathan Cameron <jic23@kernel.org>
To: Denis Ciocca <denis.ciocca@st.com>
Cc: <linux-iio@vger.kernel.org>
Subject: Re: [PATCH v2 10/11] iio: move 3-wire spi initialization to st_sensors_spi
Date: Sun, 21 Jul 2019 19:03:03 +0100 [thread overview]
Message-ID: <20190721190303.3c61b867@archlinux> (raw)
In-Reply-To: <20190721185836.7063ba7b@archlinux>
On Sun, 21 Jul 2019 18:58:36 +0100
Jonathan Cameron <jic23@kernel.org> wrote:
> On Thu, 18 Jul 2019 15:53:52 -0700
> Denis Ciocca <denis.ciocca@st.com> wrote:
>
> > Some devices need to be configured with special bit in order to
> > use spi 3-wire. This was done during device identification phase.
> > Instead, let's move this part as spi specific.
> > Doing this the check_device_support function becomes a simple
> > device id check, so let's rename it.
> >
> > Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
> A sensible solution so applied to the togreg branch of iio.git and pushed
> out as testing for the autobuilders to play with it.
Actually, your split between this patch and the next went wrong.
I've fixed up around line 651.
>
> Thanks,
>
> Jonathan
>
> > ---
> > Changes in v2:
> > not there in v1.
> >
> > drivers/iio/accel/st_accel_core.c | 4 +-
> > drivers/iio/accel/st_accel_spi.c | 4 +-
> > .../iio/common/st_sensors/st_sensors_core.c | 64 +++++-------------
> > .../iio/common/st_sensors/st_sensors_spi.c | 65 ++++++++++++++++++-
> > drivers/iio/gyro/st_gyro_core.c | 4 +-
> > drivers/iio/gyro/st_gyro_spi.c | 4 +-
> > drivers/iio/magnetometer/st_magn_core.c | 4 +-
> > drivers/iio/magnetometer/st_magn_spi.c | 4 +-
> > drivers/iio/pressure/st_pressure_core.c | 4 +-
> > drivers/iio/pressure/st_pressure_spi.c | 4 +-
> > include/linux/iio/common/st_sensors.h | 3 +-
> > include/linux/iio/common/st_sensors_spi.h | 4 +-
> > 12 files changed, 97 insertions(+), 71 deletions(-)
> >
> > diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> > index 6fc490ffef7e..630909702a19 100644
> > --- a/drivers/iio/accel/st_accel_core.c
> > +++ b/drivers/iio/accel/st_accel_core.c
> > @@ -1183,9 +1183,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
> > if (err)
> > return err;
> >
> > - err = st_sensors_check_device_support(indio_dev,
> > - ARRAY_SIZE(st_accel_sensors_settings),
> > - st_accel_sensors_settings);
> > + err = st_sensors_verify_id(indio_dev);
> > if (err < 0)
> > goto st_accel_power_off;
> >
> > diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> > index c0556db9d60a..8af7027d5598 100644
> > --- a/drivers/iio/accel/st_accel_spi.c
> > +++ b/drivers/iio/accel/st_accel_spi.c
> > @@ -124,7 +124,9 @@ static int st_accel_spi_probe(struct spi_device *spi)
> > adata = iio_priv(indio_dev);
> > adata->sensor_settings = (struct st_sensor_settings *)settings;
> >
> > - st_sensors_spi_configure(indio_dev, spi, adata);
> > + err = st_sensors_spi_configure(indio_dev, spi);
> > + if (err < 0)
> > + return err;
> >
> > err = st_accel_common_probe(indio_dev);
> > if (err < 0)
> > diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> > index 3610ca9eaa87..40977d2ee400 100644
> > --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> > +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> > @@ -608,31 +608,6 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
> > }
> > EXPORT_SYMBOL(st_sensors_read_info_raw);
> >
> > -static int st_sensors_init_interface_mode(struct iio_dev *indio_dev,
> > - const struct st_sensor_settings *sensor_settings)
> > -{
> > - struct st_sensor_data *sdata = iio_priv(indio_dev);
> > - struct device_node *np = sdata->dev->of_node;
> > - struct st_sensors_platform_data *pdata;
> > -
> > - pdata = (struct st_sensors_platform_data *)sdata->dev->platform_data;
> > - if (((np && of_property_read_bool(np, "spi-3wire")) ||
> > - (pdata && pdata->spi_3wire)) && sensor_settings->sim.addr) {
> > - int err;
> > -
> > - err = sdata->tf->write_byte(&sdata->tb, sdata->dev,
> > - sensor_settings->sim.addr,
> > - sensor_settings->sim.value);
> > - if (err < 0) {
> > - dev_err(&indio_dev->dev,
> > - "failed to init interface mode\n");
> > - return err;
> > - }
> > - }
> > -
> > - return 0;
> > -}
> > -
> > /*
> > * st_sensors_get_settings_index() - get index of the sensor settings for a
> > * specific device from list of settings
> > @@ -660,36 +635,30 @@ int st_sensors_get_settings_index(const char *name,
> > }
> > EXPORT_SYMBOL(st_sensors_get_settings_index);
> >
> > -int st_sensors_check_device_support(struct iio_dev *indio_dev,
> > - int num_sensors_list,
> > - const struct st_sensor_settings *sensor_settings)
> > +/*
> > + * st_sensors_verify_id() - verify sensor ID (WhoAmI) is matching with the
> > + * expected value
> > + * @indio_dev: IIO device reference.
> > + *
> > + * Return: 0 on success (valid sensor ID), else a negative error code.
> > + */
> > +int st_sensors_verify_id(struct iio_dev *indio_dev)
> > {
> > struct st_sensor_data *sdata = iio_priv(indio_dev);
> > - int i, err;
> > + int err;
> > u8 wai;
> >
> > - i = st_sensors_get_settings_index(indio_dev->name,
> > - sensor_settings, num_sensors_list);
> > - if (i < 0) {
> > - dev_err(&indio_dev->dev, "device name %s not recognized.\n",
> > - indio_dev->name);
> > - return i;
> > - }
> > -
> > - err = st_sensors_init_interface_mode(indio_dev, &sensor_settings[i]);
> > - if (err < 0)
> > - return err;
> > -
> > - if (sensor_settings[i].wai_addr) {
> > + if (settings->wai_addr) {
This 'settings' variable doesn't exist. Next patch uses
sdata->settings->wai_addr so I'm assuming that is correct choice here.
Thanks,
Jonathan
> > err = sdata->tf->read_byte(&sdata->tb, sdata->dev,
> > - sensor_settings[i].wai_addr, &wai);
> > + sdata->sensor_settings->wai_addr,
> > + &wai);
> > if (err < 0) {
> > dev_err(&indio_dev->dev,
> > "failed to read Who-Am-I register.\n");
> > return err;
> > }
> >
> > - if (sensor_settings[i].wai != wai) {
> > + if (sdata->sensor_settings->wai != wai) {
> > dev_err(&indio_dev->dev,
> > "%s: WhoAmI mismatch (0x%x).\n",
> > indio_dev->name, wai);
> > @@ -697,12 +666,9 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
> > }
> > }
> >
> > - sdata->sensor_settings =
> > - (struct st_sensor_settings *)&sensor_settings[i];
> > -
> > - return i;
> > + return 0;
> > }
> > -EXPORT_SYMBOL(st_sensors_check_device_support);
> > +EXPORT_SYMBOL(st_sensors_verify_id);
> >
> > ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
> > struct device_attribute *attr, char *buf)
> > diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
> > index 2213843f02cb..a57cd648975c 100644
> > --- a/drivers/iio/common/st_sensors/st_sensors_spi.c
> > +++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
> > @@ -102,9 +102,68 @@ static const struct st_sensor_transfer_function st_sensors_tf_spi = {
> > .read_multiple_byte = st_sensors_spi_read_multiple_byte,
> > };
> >
> > -void st_sensors_spi_configure(struct iio_dev *indio_dev,
> > - struct spi_device *spi, struct st_sensor_data *sdata)
> > +/*
> > + * st_sensors_is_spi_3_wire() - check if SPI 3-wire mode has been selected
> > + * @spi: spi device reference.
> > + *
> > + * Return: true if SPI 3-wire mode is selected, false otherwise.
> > + */
> > +static bool st_sensors_is_spi_3_wire(struct spi_device *spi)
> > +{
> > + struct device_node *np = spi->dev.of_node;
> > + struct st_sensors_platform_data *pdata;
> > +
> > + pdata = (struct st_sensors_platform_data *)spi->dev.platform_data;
> > + if ((np && of_property_read_bool(np, "spi-3wire")) ||
> > + (pdata && pdata->spi_3wire)) {
> > + return true;
> > + }
> > +
> > + return false;
> > +}
> > +
> > +/*
> > + * st_sensors_configure_spi_3_wire() - configure SPI 3-wire if needed
> > + * @spi: spi device reference.
> > + * @settings: sensor specific settings reference.
> > + *
> > + * Return: 0 on success, else a negative error code.
> > + */
> > +static int st_sensors_configure_spi_3_wire(struct spi_device *spi,
> > + struct st_sensor_settings *settings)
> > +{
> > + if (settings->sim.addr) {
> > + u8 buffer[] = {
> > + settings->sim.addr,
> > + settings->sim.value
> > + };
> > +
> > + return spi_write(spi, buffer, 2);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * st_sensors_spi_configure() - configure SPI interface
> > + * @indio_dev: IIO device reference.
> > + * @spi: spi device reference.
> > + *
> > + * Return: 0 on success, else a negative error code.
> > + */
> > +int st_sensors_spi_configure(struct iio_dev *indio_dev,
> > + struct spi_device *spi)
> > {
> > + struct st_sensor_data *sdata = iio_priv(indio_dev);
> > + int err;
> > +
> > + if (st_sensors_is_spi_3_wire(spi)) {
> > + err = st_sensors_configure_spi_3_wire(spi,
> > + sdata->sensor_settings);
> > + if (err < 0)
> > + return err;
> > + }
> > +
> > spi_set_drvdata(spi, indio_dev);
> >
> > indio_dev->dev.parent = &spi->dev;
> > @@ -113,6 +172,8 @@ void st_sensors_spi_configure(struct iio_dev *indio_dev,
> > sdata->dev = &spi->dev;
> > sdata->tf = &st_sensors_tf_spi;
> > sdata->get_irq_data_ready = st_sensors_spi_get_irq;
> > +
> > + return 0;
> > }
> > EXPORT_SYMBOL(st_sensors_spi_configure);
> >
> > diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
> > index 5cc63d41d855..4b87e79aa744 100644
> > --- a/drivers/iio/gyro/st_gyro_core.c
> > +++ b/drivers/iio/gyro/st_gyro_core.c
> > @@ -400,9 +400,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
> > if (err)
> > return err;
> >
> > - err = st_sensors_check_device_support(indio_dev,
> > - ARRAY_SIZE(st_gyro_sensors_settings),
> > - st_gyro_sensors_settings);
> > + err = st_sensors_verify_id(indio_dev);
> > if (err < 0)
> > goto st_gyro_power_off;
> >
> > diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
> > index bb7082055f85..b5c624251231 100644
> > --- a/drivers/iio/gyro/st_gyro_spi.c
> > +++ b/drivers/iio/gyro/st_gyro_spi.c
> > @@ -91,7 +91,9 @@ static int st_gyro_spi_probe(struct spi_device *spi)
> > gdata = iio_priv(indio_dev);
> > gdata->sensor_settings = (struct st_sensor_settings *)settings;
> >
> > - st_sensors_spi_configure(indio_dev, spi, gdata);
> > + err = st_sensors_spi_configure(indio_dev, spi);
> > + if (err < 0)
> > + return err;
> >
> > err = st_gyro_common_probe(indio_dev);
> > if (err < 0)
> > diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
> > index 43a49a52c81a..3f313aefece6 100644
> > --- a/drivers/iio/magnetometer/st_magn_core.c
> > +++ b/drivers/iio/magnetometer/st_magn_core.c
> > @@ -502,9 +502,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
> > if (err)
> > return err;
> >
> > - err = st_sensors_check_device_support(indio_dev,
> > - ARRAY_SIZE(st_magn_sensors_settings),
> > - st_magn_sensors_settings);
> > + err = st_sensors_verify_id(indio_dev);
> > if (err < 0)
> > goto st_magn_power_off;
> >
> > diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
> > index a3045afc6b53..fbf909bde841 100644
> > --- a/drivers/iio/magnetometer/st_magn_spi.c
> > +++ b/drivers/iio/magnetometer/st_magn_spi.c
> > @@ -73,7 +73,9 @@ static int st_magn_spi_probe(struct spi_device *spi)
> > mdata = iio_priv(indio_dev);
> > mdata->sensor_settings = (struct st_sensor_settings *)settings;
> >
> > - st_sensors_spi_configure(indio_dev, spi, mdata);
> > + err = st_sensors_spi_configure(indio_dev, spi);
> > + if (err < 0)
> > + return err;
> >
> > err = st_magn_common_probe(indio_dev);
> > if (err < 0)
> > diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
> > index 35d80ff27464..a783fc075c26 100644
> > --- a/drivers/iio/pressure/st_pressure_core.c
> > +++ b/drivers/iio/pressure/st_pressure_core.c
> > @@ -698,9 +698,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
> > if (err)
> > return err;
> >
> > - err = st_sensors_check_device_support(indio_dev,
> > - ARRAY_SIZE(st_press_sensors_settings),
> > - st_press_sensors_settings);
> > + err = st_sensors_verify_id(indio_dev);
> > if (err < 0)
> > goto st_press_power_off;
> >
> > diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
> > index 3e8c1ffe001e..7c8b70221e70 100644
> > --- a/drivers/iio/pressure/st_pressure_spi.c
> > +++ b/drivers/iio/pressure/st_pressure_spi.c
> > @@ -83,7 +83,9 @@ static int st_press_spi_probe(struct spi_device *spi)
> > press_data = iio_priv(indio_dev);
> > press_data->sensor_settings = (struct st_sensor_settings *)settings;
> >
> > - st_sensors_spi_configure(indio_dev, spi, press_data);
> > + err = st_sensors_spi_configure(indio_dev, spi);
> > + if (err < 0)
> > + return err;
> >
> > err = st_press_common_probe(indio_dev);
> > if (err < 0)
> > diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
> > index 17fbf3e9b013..566b955e2980 100644
> > --- a/include/linux/iio/common/st_sensors.h
> > +++ b/include/linux/iio/common/st_sensors.h
> > @@ -338,8 +338,7 @@ int st_sensors_get_settings_index(const char *name,
> > const struct st_sensor_settings *list,
> > const int list_length);
> >
> > -int st_sensors_check_device_support(struct iio_dev *indio_dev,
> > - int num_sensors_list, const struct st_sensor_settings *sensor_settings);
> > +int st_sensors_verify_id(struct iio_dev *indio_dev);
> >
> > ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
> > struct device_attribute *attr, char *buf);
> > diff --git a/include/linux/iio/common/st_sensors_spi.h b/include/linux/iio/common/st_sensors_spi.h
> > index 6020f7167859..90b25f087f06 100644
> > --- a/include/linux/iio/common/st_sensors_spi.h
> > +++ b/include/linux/iio/common/st_sensors_spi.h
> > @@ -13,7 +13,7 @@
> > #include <linux/spi/spi.h>
> > #include <linux/iio/common/st_sensors.h>
> >
> > -void st_sensors_spi_configure(struct iio_dev *indio_dev,
> > - struct spi_device *spi, struct st_sensor_data *sdata);
> > +int st_sensors_spi_configure(struct iio_dev *indio_dev,
> > + struct spi_device *spi);
> >
> > #endif /* ST_SENSORS_SPI_H */
>
next prev parent reply other threads:[~2019-07-21 18:12 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-18 22:53 [PATCH v2 00/11] iio:st_sensors: make use of regmap API Denis Ciocca
2019-07-18 22:53 ` [PATCH v2 01/11] iio:common:st_sensors: add st_sensors_get_settings_index() helper function Denis Ciocca
2019-07-21 17:48 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 02/11] iio:accel: introduce st_accel_get_settings() function Denis Ciocca
2019-07-21 17:48 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 03/11] iio:gyro: introduce st_gyro_get_settings() function Denis Ciocca
2019-07-21 17:50 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 04/11] iio:magn: introduce st_magn_get_settings() function Denis Ciocca
2019-07-21 17:51 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 05/11] iio:pressure: introduce st_press_get_settings() function Denis Ciocca
2019-07-21 17:52 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 06/11] iio:accel: device settings are set immediately during probe Denis Ciocca
2019-07-21 17:54 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 07/11] iio:gyro: " Denis Ciocca
2019-07-21 17:55 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 08/11] iio:magn: " Denis Ciocca
2019-07-21 17:56 ` Jonathan Cameron
2019-07-18 22:53 ` [PATCH v2 09/11] iio:pressure: " Denis Ciocca
2019-07-18 22:53 ` [PATCH v2 10/11] iio: move 3-wire spi initialization to st_sensors_spi Denis Ciocca
2019-07-21 17:58 ` Jonathan Cameron
2019-07-21 18:03 ` Jonathan Cameron [this message]
2019-07-22 19:53 ` Denis CIOCCA
2019-07-18 22:53 ` [PATCH v2 11/11] iio: make st_sensors drivers use regmap Denis Ciocca
2019-07-21 18:05 ` Jonathan Cameron
2019-07-22 19:53 ` Denis CIOCCA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190721190303.3c61b867@archlinux \
--to=jic23@kernel.org \
--cc=denis.ciocca@st.com \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).