From: Gwendal Grignou <gwendal@chromium.org>
To: jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, lee.jones@linaro.org, bleung@chromium.org,
enric.balletbo@collabora.com, dianders@chromium.org,
groeck@chromium.org, fabien.lahoudere@collabora.com
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
Gwendal Grignou <gwendal@chromium.org>
Subject: [PATCH 13/13] iio: cros_ec: Use Hertz as unit for sampling frequency
Date: Sun, 22 Sep 2019 10:50:21 -0700 [thread overview]
Message-ID: <20190922175021.53449-14-gwendal@chromium.org> (raw)
In-Reply-To: <20190922175021.53449-1-gwendal@chromium.org>
To be compliant with other sensors, set and get sensor sampling
frequency in Hz, not mHz.
Fixes: ae7b02ad2f32 ("iio: common: cros_ec_sensors: Expose
cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
.../cros_ec_sensors/cros_ec_sensors_core.c | 32 +++++++++++--------
.../linux/iio/common/cros_ec_sensors_core.h | 6 ++--
2 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index a32260c9bc09..f7e6827bd4cb 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -227,6 +227,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
struct iio_buffer *buffer;
u32 ver_mask;
+ int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
int ret, i;
platform_set_drvdata(pdev, indio_dev);
@@ -275,20 +276,22 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
state->calib[i].scale = MOTION_SENSE_DEFAULT_SCALE;
/* 0 is a correct value used to stop the device */
- state->frequencies[0] = 0;
if (state->msg->version < 3) {
get_default_min_max_freq(state->resp->info.type,
- &state->frequencies[1],
- &state->frequencies[2],
+ &frequencies[1],
+ &frequencies[2],
&state->fifo_max_event_count);
} else {
- state->frequencies[1] =
- state->resp->info_3.min_frequency;
- state->frequencies[2] =
- state->resp->info_3.max_frequency;
+ frequencies[1] = state->resp->info_3.min_frequency;
+ frequencies[2] = state->resp->info_3.max_frequency;
state->fifo_max_event_count =
state->resp->info_3.fifo_max_event_count;
}
+ for (i = 0; i < ARRAY_SIZE(frequencies); i++) {
+ state->frequencies[2 * i] = frequencies[i] / 1000;
+ state->frequencies[2 * i + 1] =
+ (frequencies[i] % 1000) * 1000;
+ }
if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
buffer = devm_iio_kfifo_allocate(dev);
@@ -653,7 +656,7 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
- int ret;
+ int ret, frequency;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
@@ -665,8 +668,10 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
if (ret)
break;
- *val = st->resp->sensor_odr.ret;
- ret = IIO_VAL_INT;
+ frequency = st->resp->sensor_odr.ret;
+ *val = frequency / 1000;
+ *val2 = (frequency % 1000) * 1000;
+ ret = IIO_VAL_INT_PLUS_MICRO;
break;
default:
ret = -EINVAL;
@@ -690,7 +695,7 @@ int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_SAMP_FREQ:
*length = ARRAY_SIZE(state->frequencies);
*vals = (const int *)&state->frequencies;
- *type = IIO_VAL_INT;
+ *type = IIO_VAL_INT_PLUS_MICRO;
return IIO_AVAIL_LIST;
}
@@ -702,12 +707,13 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
- int ret;
+ int ret, frequency;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
+ frequency = val * 1000 + val2 / 1000;
st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
- st->param.sensor_odr.data = val;
+ st->param.sensor_odr.data = frequency;
/* Always roundup, so caller gets at least what it asks for. */
st->param.sensor_odr.roundup = 1;
diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
index 2c6acbde0d02..46d5110b2fe4 100644
--- a/include/linux/iio/common/cros_ec_sensors_core.h
+++ b/include/linux/iio/common/cros_ec_sensors_core.h
@@ -56,6 +56,8 @@ typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
* @read_ec_sensors_data: function used for accessing sensors values
* @curr_sampl_freq: current sampling period
* @fifo_max_event_count: Size of the EC sensor FIFO
+ * @frequencies: Table of known available frequencies:
+ * 0, Min and Max in mHz.
*/
struct cros_ec_sensors_core_state {
struct cros_ec_device *ec;
@@ -80,9 +82,7 @@ struct cros_ec_sensors_core_state {
int curr_sampl_freq;
u32 fifo_max_event_count;
-
- /* Table of known available frequencies : 0, Min and Max in mHz */
- int frequencies[3];
+ int frequencies[6];
};
/**
--
2.23.0.351.gc4317032e6-goog
next prev parent reply other threads:[~2019-09-22 17:51 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-22 17:50 [PATCH 00/13] cros_ec: Add sensorhub driver and FIFO processing Gwendal Grignou
2019-09-22 17:50 ` [PATCH 01/13] mfd: cros_ec: Add sensor_count and make check_features public Gwendal Grignou
2019-09-30 13:15 ` Enric Balletbo i Serra
2019-09-30 16:24 ` Gwendal Grignou
2019-10-05 15:26 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 02/13] platform: cros_ec: Add cros_ec_sensor_hub driver Gwendal Grignou
2019-10-01 10:31 ` Enric Balletbo i Serra
2019-10-05 15:35 ` Jonathan Cameron
2019-10-05 15:36 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 03/13] platform/mfd:iio: cros_ec: Register sensor through sensorhub Gwendal Grignou
2019-10-05 15:41 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 04/13] platform: chrome: cros-ec: record event timestamp in the hard irq Gwendal Grignou
2019-10-01 10:32 ` Enric Balletbo i Serra
2019-10-05 15:44 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 05/13] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number Gwendal Grignou
2019-10-01 10:32 ` Enric Balletbo i Serra
2019-09-22 17:50 ` [PATCH 06/13] platform: chrome: cros_ec: handle MKBP more events flag Gwendal Grignou
2019-10-01 10:32 ` Enric Balletbo i Serra
2019-10-05 15:52 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 07/13] platform: chrome: sensorhub: Add FIFO support Gwendal Grignou
2019-10-05 16:08 ` Jonathan Cameron
2019-10-05 16:14 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 08/13] platform: chrome: sensorhub: Add code to spread timestmap Gwendal Grignou
2019-10-05 16:16 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 09/13] platform: chrome: sensorhub: Add median filter Gwendal Grignou
2019-10-05 16:24 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 10/13] iio: cros_ec: Use triggered buffer only when EC does not support FIFO Gwendal Grignou
2019-10-05 16:30 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 11/13] iio: cros_ec: Expose hwfifo_timeout Gwendal Grignou
2019-10-05 16:35 ` Jonathan Cameron
2019-09-22 17:50 ` [PATCH 12/13] iio: cros_ec: Report hwfifo_watermark_max Gwendal Grignou
2019-10-05 16:37 ` Jonathan Cameron
2019-09-22 17:50 ` Gwendal Grignou [this message]
2019-10-05 16:39 ` [PATCH 13/13] iio: cros_ec: Use Hertz as unit for sampling frequency Jonathan Cameron
2019-10-05 15:39 ` [PATCH 00/13] cros_ec: Add sensorhub driver and FIFO processing Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190922175021.53449-14-gwendal@chromium.org \
--to=gwendal@chromium.org \
--cc=bleung@chromium.org \
--cc=dianders@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=fabien.lahoudere@collabora.com \
--cc=groeck@chromium.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).