linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Jonathan Cameron <jic23@kernel.org>
Cc: lorenzo.bianconi@redhat.com, linux-iio@vger.kernel.org, sean@geanix.com
Subject: Re: [PATCH] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
Date: Sun, 1 Dec 2019 23:07:27 +0200	[thread overview]
Message-ID: <20191201210727.GB11638@localhost.localdomain> (raw)
In-Reply-To: <20191201210151.5aa8c4c3@archlinux>

[-- Attachment #1: Type: text/plain, Size: 3312 bytes --]

> On Fri, 29 Nov 2019 11:37:24 +0200
> Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> 
> > Do not power-off accel unconditionally if wake-up events are enabled
> > powering off the hw FIFO. At the same time do not power-off the accel
> > sensor if it is 'batched' in the hw FIFO disabling sensor events
> > 
> > Fixes: b5969abfa8b8 ("iio: imu: st_lsm6dsx: add motion events")
> > Tested-by: Sean Nyekjaer <sean@geanix.com>
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> Not applied as this seems to be dependent on one of the earlier patches.
> Please put them in a series and resend.

Hi Jonathan,

Sorry for the noise, but I discovered the issue after I have already sent
the other patch out. I will post them together in v2.

Regards,
Lorenzo

> 
> Thanks,
> 
> Jonathan
> > ---
> > This patch is based on https://patchwork.kernel.org/patch/11266301/
> > ---
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 30 +++++++++++++++++---
> >  1 file changed, 26 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index 13590c041d22..990643da9f4e 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -1447,8 +1447,9 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
> >  	return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
> >  }
> >  
> > -int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> > -				 bool enable)
> > +static int
> > +__st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> > +			       bool enable)
> >  {
> >  	struct st_lsm6dsx_hw *hw = sensor->hw;
> >  	u32 odr = enable ? sensor->odr : 0;
> > @@ -1466,6 +1467,26 @@ int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> >  	return 0;
> >  }
> >  
> > +static int
> > +st_lsm6dsx_check_events(struct st_lsm6dsx_sensor *sensor, bool enable)
> > +{
> > +	struct st_lsm6dsx_hw *hw = sensor->hw;
> > +
> > +	if (sensor->id == ST_LSM6DSX_ID_GYRO || enable)
> > +		return 0;
> > +
> > +	return hw->enable_event;
> > +}
> > +
> > +int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> > +				 bool enable)
> > +{
> > +	if (st_lsm6dsx_check_events(sensor, enable))
> > +		return 0;
> > +
> > +	return __st_lsm6dsx_sensor_set_enable(sensor, enable);
> > +}
> > +
> >  static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
> >  				   u8 addr, int *val)
> >  {
> > @@ -1662,7 +1683,7 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
> >  	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
> >  	struct st_lsm6dsx_hw *hw = sensor->hw;
> >  	u8 enable_event;
> > -	int err = 0;
> > +	int err;
> >  
> >  	if (type != IIO_EV_TYPE_THRESH)
> >  		return -EINVAL;
> > @@ -1690,7 +1711,8 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
> >  		return err;
> >  
> >  	mutex_lock(&hw->conf_lock);
> > -	err = st_lsm6dsx_sensor_set_enable(sensor, state);
> > +	if (enable_event || !(hw->fifo_mask & BIT(sensor->id)))
> > +		err = __st_lsm6dsx_sensor_set_enable(sensor, state);
> >  	mutex_unlock(&hw->conf_lock);
> >  	if (err < 0)
> >  		return err;
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2019-12-01 21:07 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-29  9:37 [PATCH] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled Lorenzo Bianconi
2019-12-01 21:01 ` Jonathan Cameron
2019-12-01 21:07   ` Lorenzo Bianconi [this message]
2019-12-01 21:20     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191201210727.GB11638@localhost.localdomain \
    --to=lorenzo@kernel.org \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=sean@geanix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).