From: Jonathan Cameron <jic23@kernel.org>
To: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: linux-iio@vger.kernel.org
Subject: Re: [PATCH v6 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
Date: Fri, 14 Feb 2020 14:24:25 +0000 [thread overview]
Message-ID: <20200214142425.431548cf@archlinux> (raw)
In-Reply-To: <20200210001058.7515-2-matt.ranostay@konsulko.com>
On Sun, 9 Feb 2020 16:10:56 -0800
Matt Ranostay <matt.ranostay@konsulko.com> wrote:
> Sensors don't actually need a interrupt line to give valid readings,
> and can triggered with CONFIG_IIO_HRTIMER_TRIGGER as well. Remove
> the required check for interrupt, and continue along in the probe
> function.
>
> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Hi Matt,
I'm going to hold this for conclusion of the discussion about whether
the interrupt enable / disable should be related to the buffer or the trigger.
(v4 I think...)
Thanks,
Jonathan
> ---
> drivers/iio/chemical/atlas-sensor.c | 27 ++++++++++++---------------
> 1 file changed, 12 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c
> index 2f0a6fed2589..9a1ab9f8fcc5 100644
> --- a/drivers/iio/chemical/atlas-sensor.c
> +++ b/drivers/iio/chemical/atlas-sensor.c
> @@ -572,11 +572,6 @@ static int atlas_probe(struct i2c_client *client,
> if (ret)
> return ret;
>
> - if (client->irq <= 0) {
> - dev_err(&client->dev, "no valid irq defined\n");
> - return -EINVAL;
> - }
> -
> ret = chip->calibration(data);
> if (ret)
> return ret;
> @@ -596,16 +591,18 @@ static int atlas_probe(struct i2c_client *client,
>
> init_irq_work(&data->work, atlas_work_handler);
>
> - /* interrupt pin toggles on new conversion */
> - ret = devm_request_threaded_irq(&client->dev, client->irq,
> - NULL, atlas_interrupt_handler,
> - IRQF_TRIGGER_RISING |
> - IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> - "atlas_irq",
> - indio_dev);
> - if (ret) {
> - dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
> - goto unregister_buffer;
> + if (client->irq > 0) {
> + /* interrupt pin toggles on new conversion */
> + ret = devm_request_threaded_irq(&client->dev, client->irq,
> + NULL, atlas_interrupt_handler,
> + IRQF_TRIGGER_RISING |
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "atlas_irq",
> + indio_dev);
> +
> + if (ret)
> + dev_warn(&client->dev,
> + "request irq (%d) failed\n", client->irq);
> }
>
> ret = atlas_set_powermode(data, 1);
next prev parent reply other threads:[~2020-02-14 14:24 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-10 0:10 [PATCH v6 0/3] iio: chemical: atlas-sensor: add DO support Matt Ranostay
2020-02-10 0:10 ` [PATCH v6 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line Matt Ranostay
2020-02-14 14:24 ` Jonathan Cameron [this message]
2020-02-15 22:43 ` Matt Ranostay
2020-02-10 0:10 ` [PATCH v6 2/3] iio: chemical: atlas-sensor: add DO-SM module support Matt Ranostay
2020-02-10 0:10 ` [PATCH v6 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs Matt Ranostay
2020-04-13 17:10 ` [PATCH v6 0/3] iio: chemical: atlas-sensor: add DO support Jonathan Cameron
2020-04-28 4:30 ` Matt Ranostay
2020-05-02 16:23 ` Jonathan Cameron
2020-05-03 23:50 ` Matt Ranostay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214142425.431548cf@archlinux \
--to=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=matt.ranostay@konsulko.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).