From: "Gaëtan André" <rvlander@gaetanandre.eu>
To: <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
"Gaëtan André" <rvlander@gaetanandre.eu>
Subject: [PATCH 2/2] iio: accel: st_sensors: add support for LIS2HH12
Date: Mon, 30 Mar 2020 16:19:23 +0200 [thread overview]
Message-ID: <20200330141923.280226-2-rvlander@gaetanandre.eu> (raw)
In-Reply-To: <20200330141923.280226-1-rvlander@gaetanandre.eu>
Add support for STMicroelectronics LISHH12 accelerometer in st_accel
framework.
https://www.st.com/resource/en/datasheet/lis2hh12.pdf
Signed-off-by: Gaëtan André <rvlander@gaetanandre.eu>
---
drivers/iio/accel/Kconfig | 2 +-
drivers/iio/accel/st_accel.h | 2 +
drivers/iio/accel/st_accel_core.c | 77 +++++++++++++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 5 ++
4 files changed, 85 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 5d91a6dda894..24ebe9e76915 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -238,7 +238,7 @@ config IIO_ST_ACCEL_3AXIS
Say yes here to build support for STMicroelectronics accelerometers:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
- LNG2DM, LIS3DE, LIS2DE12
+ LNG2DM, LIS3DE, LIS2DE12, LIS2HH12
This driver can also be built as a module. If so, these modules
will be created:
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 5b13e293cade..5d356288e001 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -35,6 +35,7 @@ enum st_accel_type {
LIS2DW12,
LIS3DHH,
LIS2DE12,
+ LIS2HH12,
ST_ACCEL_MAX,
};
@@ -59,6 +60,7 @@ enum st_accel_type {
#define LIS3DHH_ACCEL_DEV_NAME "lis3dhh"
#define LIS3DE_ACCEL_DEV_NAME "lis3de"
#define LIS2DE12_ACCEL_DEV_NAME "lis2de12"
+#define LIS2HH12_ACCEL_DEV_NAME "lis2hh12"
/**
* struct st_sensors_platform_data - default accel platform data
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index e2ec5d127495..43c50167d220 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -904,6 +904,83 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.multi_read_bit = true,
.bootime = 2,
},
+ {
+ .wai = 0x41,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+ .sensors_supported = {
+ [0] = LIS2HH12_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = 0x20,
+ .mask = 0x70,
+ .odr_avl = {
+ { .hz = 10, .value = 0x01, },
+ { .hz = 50, .value = 0x02, },
+ { .hz = 100, .value = 0x03, },
+ { .hz = 200, .value = 0x04, },
+ { .hz = 400, .value = 0x05, },
+ { .hz = 800, .value = 0x06, },
+ },
+ },
+ .pw = {
+ .addr = 0x20,
+ .mask = 0x70,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = 0x23,
+ .mask = 0x30,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = 0x00,
+ .gain = IIO_G_TO_M_S_2(61),
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = 0x02,
+ .gain = IIO_G_TO_M_S_2(122),
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = 0x03,
+ .gain = IIO_G_TO_M_S_2(244),
+ },
+ },
+ },
+ .bdu = {
+ .addr = 0x20,
+ .mask = 0x08,
+ },
+ .drdy_irq = {
+ .int1 = {
+ .addr = 0x22,
+ .mask = 0x01,
+ },
+ .int2 = {
+ .addr = 0x25,
+ .mask = 0x01,
+ },
+ .addr_ihl = 0x24,
+ .mask_ihl = 0x02,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
+ },
+ .sim = {
+ .addr = 0x23,
+ .value = BIT(0),
+ },
+ .multi_read_bit = true,
+ .bootime = 2,
+ },
+
};
static int st_accel_read_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 8c489312f668..821854251a7b 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -104,6 +104,10 @@ static const struct of_device_id st_accel_of_match[] = {
.compatible = "st,lis2de12",
.data = LIS2DE12_ACCEL_DEV_NAME,
},
+ {
+ .compatible = "st,lis2hh12",
+ .data = LIS2HH12_ACCEL_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -138,6 +142,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
{ LIS2DW12_ACCEL_DEV_NAME },
{ LIS3DE_ACCEL_DEV_NAME },
{ LIS2DE12_ACCEL_DEV_NAME },
+ { LIS2HH12_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
--
2.26.0
next prev parent reply other threads:[~2020-03-30 14:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-30 14:19 [PATCH 1/2] dt-bindings: st_sensors: add st,lis2hh12 compatible entry Gaëtan André
2020-03-30 14:19 ` Gaëtan André [this message]
2020-03-30 17:10 ` [PATCH 2/2] iio: accel: st_sensors: add support for LIS2HH12 Stephan Gerhold
2020-04-04 15:42 ` Jonathan Cameron
2020-04-04 15:41 ` [PATCH 1/2] dt-bindings: st_sensors: add st,lis2hh12 compatible entry Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200330141923.280226-2-rvlander@gaetanandre.eu \
--to=rvlander@gaetanandre.eu \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).