From: Jonathan Cameron <jic23@kernel.org>
To: Saravanan Sekar <sravanhome@gmail.com>
Cc: lee.jones@linaro.org, andy.shevchenko@gmail.com,
robh+dt@kernel.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, sre@kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: Re: [PATCH v10 1/6] dt-bindings: mfd: add document bindings for mp2629
Date: Sat, 18 Apr 2020 15:53:08 +0100 [thread overview]
Message-ID: <20200418155308.681df38f@archlinux> (raw)
In-Reply-To: <20200417085003.6124-2-sravanhome@gmail.com>
On Fri, 17 Apr 2020 10:49:58 +0200
Saravanan Sekar <sravanhome@gmail.com> wrote:
> Add device tree binding information for mp2629 mfd driver.
>
> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---
> .../devicetree/bindings/mfd/mps,mp2629.yaml | 61 +++++++++++++++++++
> 1 file changed, 61 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
> new file mode 100644
> index 000000000000..b25b29259d67
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/mps,mp2629.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MP2629 Battery Charger PMIC from Monolithic Power System.
> +
> +maintainers:
> + - Saravanan Sekar <sravanhome@gmail.com>
> +
> +description: |
> + MP2629 is a PMIC providing battery charging and power supply for smartphones,
> + wireless camera and portable devices. Chip is controlled over I2C.
> +
> + The battery charge management device handles battery charger controller and
> + ADC IIO device for battery, system voltage
> +
> +properties:
> + compatible:
> + const: mps,mp2629
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 2
> + description:
> + The first cell is the IRQ number, the second cell is the trigger type.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-controller
> + - "#interrupt-cells"
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/input/linux-event-codes.h>
> + i2c@7e205000 {
I thought the general trend for i2c devices was to leave the i2c
part 'vague'.
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@4b.. etc
Guess it doesn't matter if example contains too much information. Rob?
Otherwise looks good to me.
Thanks,
Jonathan
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x7e205000 0x200>;
> +
> + pmic@4b {
> + compatible = "mps,mp2629";
> + reg = <0x4b>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gpio2>;
> + #interrupt-cells = <2>;
> + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
next prev parent reply other threads:[~2020-04-18 14:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-17 8:49 [PATCH v10 0/6] Add battery charger driver support for MP2629 Saravanan Sekar
2020-04-17 8:49 ` [PATCH v10 1/6] dt-bindings: mfd: add document bindings for mp2629 Saravanan Sekar
2020-04-18 14:53 ` Jonathan Cameron [this message]
2020-04-18 15:01 ` saravanan sekar
2020-04-18 16:06 ` Jonathan Cameron
2020-04-20 7:19 ` Lee Jones
2020-04-29 21:42 ` Rob Herring
2020-04-17 8:49 ` [PATCH v10 2/6] mfd: mp2629: Add support for mps battery charger Saravanan Sekar
2020-04-18 14:50 ` Jonathan Cameron
2020-04-17 8:50 ` [PATCH v10 3/6] iio: adc: mp2629: Add support for mp2629 ADC driver Saravanan Sekar
2020-04-17 14:35 ` Randy Dunlap
2020-04-17 14:51 ` saravanan sekar
2020-04-17 15:14 ` Randy Dunlap
2020-04-18 14:48 ` Jonathan Cameron
2020-04-17 8:50 ` [PATCH v10 4/6] power: supply: Add support for mps mp2629 battery charger Saravanan Sekar
2020-04-26 20:02 ` Sebastian Reichel
2020-04-17 8:50 ` [PATCH v10 5/6] power: supply: mp2629: Add impedance compensation config Saravanan Sekar
2020-04-17 8:50 ` [PATCH v10 6/6] MAINTAINERS: Add entry for mp2629 Battery Charger driver Saravanan Sekar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200418155308.681df38f@archlinux \
--to=jic23@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=sravanhome@gmail.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).