From: Chris Ruehl <chris.ruehl@gtsys.com.hk>
To: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Cc: devicetree@vger.kernel.org,
"Michael Hennerich" <michael.hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Hartmut Knaack" <knaack.h@gmx.de>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Peter Meerwald-Stadler" <pmeerw@pmeerw.net>,
"Rob Herring" <robh+dt@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Alexios Zavras" <alexios.zavras@intel.com>,
"Steve Winslow" <swinslow@gmail.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 3/3] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
Date: Mon, 20 Apr 2020 12:26:08 +0800 [thread overview]
Message-ID: <20200420042612.27752-4-chris.ruehl@gtsys.com.hk> (raw)
In-Reply-To: <20200420042612.27752-1-chris.ruehl@gtsys.com.hk>
Conversion of the ltc2632 to yaml format and name the file 'lltc,ltc2632.yaml'.
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
v5:
correct require section
set maintainer of analog.com
v4..v2: no change
.../bindings/iio/dac/lltc,ltc2632.yaml | 76 +++++++++++++++++++
.../devicetree/bindings/iio/dac/ltc2632.txt | 49 ------------
2 files changed, 76 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc2632.txt
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
new file mode 100644
index 000000000000..b0043144fbc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+ Bindings for the Linear Technology LTC2632/2634/2636 DAC
+ Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc2632-l12
+ - lltc,ltc2632-l10
+ - lltc,ltc2632-l8
+ - lltc,ltc2632-h12
+ - lltc,ltc2632-h10
+ - lltc,ltc2632-h8
+ - lltc,ltc2634-l12
+ - lltc,ltc2634-l10
+ - lltc,ltc2634-l8
+ - lltc,ltc2634-h12
+ - lltc,ltc2634-h10
+ - lltc,ltc2634-h8
+ - lltc,ltc2636-l12
+ - lltc,ltc2636-l10
+ - lltc,ltc2636-l8
+ - lltc,ltc2636-h12
+ - lltc,ltc2636-h10
+ - lltc,ltc2636-h8
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 2000000
+
+ vref-supply:
+ description:
+ Phandle to the external reference voltage supply. This should
+ only be set if there is an external reference voltage connected to the VREF
+ pin. If the property is not set the internal reference is used.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ vref: regulator-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-ltc2632";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ };
+
+ spi_master {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dac: ltc2632@0 {
+ compatible = "lltc,ltc2632";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1000000>;
+ vref-supply = <&vref>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
deleted file mode 100644
index 1ab9570cf219..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Linear Technology LTC2632/2634/2636 DAC
-
-Required properties:
- - compatible: Has to contain one of the following:
- lltc,ltc2632-l12
- lltc,ltc2632-l10
- lltc,ltc2632-l8
- lltc,ltc2632-h12
- lltc,ltc2632-h10
- lltc,ltc2632-h8
- lltc,ltc2634-l12
- lltc,ltc2634-l10
- lltc,ltc2634-l8
- lltc,ltc2634-h12
- lltc,ltc2634-h10
- lltc,ltc2634-h8
- lltc,ltc2636-l12
- lltc,ltc2636-l10
- lltc,ltc2636-l8
- lltc,ltc2636-h12
- lltc,ltc2636-h10
- lltc,ltc2636-h8
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply. In particular, "reg" and "spi-max-frequency" properties must be given.
-
-Optional properties:
- - vref-supply: Phandle to the external reference voltage supply. This should
- only be set if there is an external reference voltage connected to the VREF
- pin. If the property is not set the internal reference is used.
-
-Example:
-
- vref: regulator-vref {
- compatible = "regulator-fixed";
- regulator-name = "vref-ltc2632";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-always-on;
- };
-
- spi_master {
- dac: ltc2632@0 {
- compatible = "lltc,ltc2632-l12";
- reg = <0>; /* CS0 */
- spi-max-frequency = <1000000>;
- vref-supply = <&vref>; /* optional */
- };
- };
--
2.20.1
next prev parent reply other threads:[~2020-04-20 4:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-20 4:26 [PATCH v5] iio: patch set ltc2632 Chris Ruehl
2020-04-20 4:26 ` [PATCH v5 1/3] iio: documentation ltc2632_chip_info add num_channels Chris Ruehl
2020-04-25 19:37 ` Jonathan Cameron
2020-04-20 4:26 ` [PATCH v5 2/3] iio: DAC extension for ltc2634-12/10/8 Chris Ruehl
2020-04-30 15:17 ` Rob Herring
2020-04-20 4:26 ` Chris Ruehl [this message]
2020-04-25 19:35 ` [PATCH v5 3/3] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml Jonathan Cameron
2020-04-27 1:09 ` Chris Ruehl
2020-04-30 15:24 ` Rob Herring
2020-08-10 3:01 ` Chris Ruehl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200420042612.27752-4-chris.ruehl@gtsys.com.hk \
--to=chris.ruehl@gtsys.com.hk \
--cc=alexios.zavras@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.hennerich@analog.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=swinslow@gmail.com \
--cc=tglx@linutronix.de \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).