From: Daniel Campello <campello@chromium.org>
To: LKML <devicetree@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>,
Daniel Campello <campello@chromium.org>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Stephen Boyd <swboyd@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Enrico Granata <egranata@chromium.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
linux-iio@vger.kernel.org
Subject: [PATCH v4 07/15] iio: sx9310: Use long instead of int for channel bitmaps
Date: Mon, 3 Aug 2020 17:41:46 -0600 [thread overview]
Message-ID: <20200803131544.v4.7.Iecaa50e469918a385b3e5dab375e442540ea2ad4@changeid> (raw)
In-Reply-To: <20200803234154.320400-1-campello@chromium.org>
Uses for_each_set_bit() macro to loop over channel bitmaps.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
Changes in v4: None
Changes in v3:
- Added static assert for number of channels.
Changes in v2:
- Changed prox_stat to chan_prox_stat bitmap.
drivers/iio/proximity/sx9310.c | 39 ++++++++++++++++++----------------
1 file changed, 21 insertions(+), 18 deletions(-)
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 20a26b73b5ae90..45569a0657060c 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -118,6 +118,7 @@
/* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
#define SX9310_NUM_CHANNELS 4
+static_assert(SX9310_NUM_CHANNELS < BITS_PER_LONG);
struct sx9310_data {
/* Serialize access to registers and channel configuration */
@@ -129,7 +130,7 @@ struct sx9310_data {
* Last reading of the proximity status for each channel.
* We only send an event to user space when this changes.
*/
- bool prox_stat[SX9310_NUM_CHANNELS];
+ unsigned long chan_prox_stat;
bool trigger_enabled;
/* Ensure correct alignment of timestamp when present. */
struct {
@@ -139,7 +140,8 @@ struct sx9310_data {
/* Remember enabled channels and sample rate during suspend. */
unsigned int suspend_ctrl0;
struct completion completion;
- unsigned int chan_read, chan_event;
+ unsigned long chan_read;
+ unsigned long chan_event;
int channel_users[SX9310_NUM_CHANNELS];
unsigned int whoami;
};
@@ -282,15 +284,16 @@ static const struct regmap_config sx9310_regmap_config = {
};
static int sx9310_update_chan_en(struct sx9310_data *data,
- unsigned int chan_read,
- unsigned int chan_event)
+ unsigned long chan_read,
+ unsigned long chan_event)
{
int ret;
+ unsigned long channels = chan_read | chan_event;
- if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
+ if ((data->chan_read | data->chan_event) != channels) {
ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
- chan_read | chan_event);
+ channels);
if (ret)
return ret;
}
@@ -531,6 +534,7 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
unsigned int val, chan;
struct sx9310_data *data = iio_priv(indio_dev);
s64 timestamp = iio_get_time_ns(indio_dev);
+ unsigned long prox_changed;
/* Read proximity state on all channels */
ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
@@ -539,24 +543,23 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
return;
}
- for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
+ /*
+ * Only iterate over channels with changes on proximity status that have
+ * events enabled.
+ */
+ prox_changed = (data->chan_prox_stat ^ val) & data->chan_event;
+
+ for_each_set_bit(chan, &prox_changed, SX9310_NUM_CHANNELS) {
int dir;
u64 ev;
- bool new_prox = val & BIT(chan);
-
- if (!(data->chan_event & BIT(chan)))
- continue;
- if (new_prox == data->prox_stat[chan])
- /* No change on this channel. */
- continue;
- dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+ dir = val & BIT(chan) ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
IIO_EV_TYPE_THRESH, dir);
iio_push_event(indio_dev, ev, timestamp);
- data->prox_stat[chan] = new_prox;
}
+ data->chan_prox_stat = val;
}
static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
@@ -713,13 +716,13 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
{
struct sx9310_data *data = iio_priv(indio_dev);
- unsigned int channels = 0;
+ unsigned long channels = 0;
int bit, ret;
mutex_lock(&data->mutex);
for_each_set_bit(bit, indio_dev->active_scan_mask,
indio_dev->masklength)
- channels |= BIT(indio_dev->channels[bit].channel);
+ __set_bit(indio_dev->channels[bit].channel, &channels);
ret = sx9310_update_chan_en(data, channels, data->chan_event);
mutex_unlock(&data->mutex);
--
2.28.0.163.g6104cc2f0b6-goog
next prev parent reply other threads:[~2020-08-03 23:42 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-03 23:41 [PATCH v4 00/15] sx9310 iio driver updates Daniel Campello
2020-08-03 23:41 ` [PATCH v4 01/15] dt-bindings: iio: Add bindings for sx9310 sensor Daniel Campello
2020-08-03 23:41 ` [PATCH v4 02/15] iio: sx9310: Update macros declarations Daniel Campello
2020-08-03 23:41 ` [PATCH v4 03/15] iio: sx9310: Fix irq handling Daniel Campello
2020-08-03 23:41 ` [PATCH v4 04/15] iio: sx9310: Remove acpi and of table macros Daniel Campello
2020-08-03 23:41 ` [PATCH v4 05/15] iio: sx9310: Change from .probe to .probe_new Daniel Campello
2020-08-03 23:41 ` [PATCH v4 06/15] iio: sx9310: Fixes various memory handling Daniel Campello
2020-08-03 23:41 ` Daniel Campello [this message]
2020-08-03 23:41 ` [PATCH v4 08/15] iio: sx9310: Use regmap_read_poll_timeout() for compensation Daniel Campello
2020-08-03 23:41 ` [PATCH v4 09/15] iio: sx9310: Update copyright Daniel Campello
2020-08-03 23:41 ` [PATCH v4 10/15] iio: sx9310: Simplify error return handling Daniel Campello
2020-08-03 23:41 ` [PATCH v4 11/15] iio: sx9310: Use variable to hold &client->dev Daniel Campello
2020-08-03 23:41 ` [PATCH v4 12/15] iio: sx9310: Miscellaneous format fixes Daniel Campello
2020-08-03 23:41 ` [PATCH v4 13/15] iio: sx9310: Drop channel_users[] Daniel Campello
2020-08-03 23:41 ` [PATCH v4 14/15] iio: sx9310: Enable vdd and svdd regulators at probe Daniel Campello
2020-08-03 23:41 ` [PATCH v4 15/15] iio: sx9310: Use irq trigger flags from firmware Daniel Campello
2020-08-03 23:50 ` [PATCH v4 00/15] sx9310 iio driver updates Daniel Campello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200803131544.v4.7.Iecaa50e469918a385b3e5dab375e442540ea2ad4@changeid \
--to=campello@chromium.org \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=egranata@chromium.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).