linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Campello <campello@chromium.org>
To: LKML <devicetree@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>,
	Daniel Campello <campello@chromium.org>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Stephen Boyd <swboyd@chromium.org>,
	Douglas Anderson <dianders@chromium.org>,
	Gwendal Grignou <gwendal@chromium.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	linux-iio@vger.kernel.org
Subject: [PATCH v5 10/15] iio: sx9310: Simplify error return handling
Date: Mon,  3 Aug 2020 17:58:10 -0600	[thread overview]
Message-ID: <20200803175559.v5.10.I071b118136317d3ff77fc598079f21e4ed0e347f@changeid> (raw)
In-Reply-To: <20200803235815.778997-1-campello@chromium.org>

Checks for non-zero return values to signal error conditions.

Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/iio/proximity/sx9310.c | 56 +++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 87b2de0d7b55a3..adb707e2d79612 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -347,7 +347,7 @@ static int sx9310_read_prox_data(struct sx9310_data *data,
 	int ret;
 
 	ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
@@ -363,7 +363,7 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
 	unsigned int val;
 
 	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	val = FIELD_GET(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, val);
@@ -376,17 +376,17 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
 static int sx9310_read_proximity(struct sx9310_data *data,
 				 const struct iio_chan_spec *chan, int *val)
 {
-	int ret = 0;
+	int ret;
 	__be16 rawval;
 
 	mutex_lock(&data->mutex);
 
 	ret = sx9310_get_read_channel(data, chan->channel);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
-	if (ret < 0)
+	if (ret)
 		goto out_put_channel;
 
 	mutex_unlock(&data->mutex);
@@ -400,22 +400,22 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 
 	mutex_lock(&data->mutex);
 
-	if (ret < 0)
+	if (ret)
 		goto out_disable_irq;
 
 	ret = sx9310_read_prox_data(data, chan, &rawval);
-	if (ret < 0)
+	if (ret)
 		goto out_disable_irq;
 
 	*val = sign_extend32(be16_to_cpu(rawval),
 			     (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
 
 	ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
-	if (ret < 0)
+	if (ret)
 		goto out_put_channel;
 
 	ret = sx9310_put_read_channel(data, chan->channel);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	mutex_unlock(&data->mutex);
@@ -437,7 +437,7 @@ static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
 	unsigned int regval;
 	int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
 
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	regval = FIELD_GET(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, regval);
@@ -539,7 +539,7 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
 
 	/* Read proximity state on all channels */
 	ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(&data->client->dev, "i2c transfer error in irq\n");
 		return;
 	}
@@ -573,7 +573,7 @@ static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
 	mutex_lock(&data->mutex);
 
 	ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(&data->client->dev, "i2c transfer error in irq\n");
 		goto out;
 	}
@@ -616,20 +616,20 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 	mutex_lock(&data->mutex);
 	if (state) {
 		ret = sx9310_get_event_channel(data, chan->channel);
-		if (ret < 0)
+		if (ret)
 			goto out_unlock;
 		if (!(data->chan_event & ~BIT(chan->channel))) {
 			ret = sx9310_enable_irq(data, eventirq);
-			if (ret < 0)
+			if (ret)
 				sx9310_put_event_channel(data, chan->channel);
 		}
 	} else {
 		ret = sx9310_put_event_channel(data, chan->channel);
-		if (ret < 0)
+		if (ret)
 			goto out_unlock;
 		if (!data->chan_event) {
 			ret = sx9310_disable_irq(data, eventirq);
-			if (ret < 0)
+			if (ret)
 				sx9310_get_event_channel(data, chan->channel);
 		}
 	}
@@ -668,7 +668,7 @@ static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state)
 		ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
 	else if (!data->chan_read)
 		ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	data->trigger_enabled = state;
@@ -697,7 +697,7 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
 			 indio_dev->masklength) {
 		ret = sx9310_read_prox_data(data, &indio_dev->channels[bit],
 					    &val);
-		if (ret < 0)
+		if (ret)
 			goto out;
 
 		data->buffer.channels[i++] = val;
@@ -804,13 +804,13 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 	unsigned int ctrl0;
 
 	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* run the compensation phase on all channels */
 	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
 			   ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val,
@@ -836,21 +836,21 @@ static int sx9310_init_device(struct iio_dev *indio_dev)
 	unsigned int i, val;
 
 	ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	usleep_range(1000, 2000); /* power-up time is ~1ms. */
 
 	/* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */
 	ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* Program some sane defaults. */
 	for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
 		initval = &sx9310_default_regs[i];
 		ret = regmap_write(data->regmap, initval->reg, initval->def);
-		if (ret < 0)
+		if (ret)
 			return ret;
 	}
 
@@ -904,14 +904,14 @@ static int sx9310_probe(struct i2c_client *client)
 		return PTR_ERR(data->regmap);
 
 	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(&client->dev, "error in reading WHOAMI register: %d",
 			ret);
 		return ret;
 	}
 
 	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
@@ -923,7 +923,7 @@ static int sx9310_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, indio_dev);
 
 	ret = sx9310_init_device(indio_dev);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	if (client->irq) {
@@ -932,7 +932,7 @@ static int sx9310_probe(struct i2c_client *client)
 						sx9310_irq_thread_handler,
 						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 						"sx9310_event", indio_dev);
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		data->trig =
@@ -954,7 +954,7 @@ static int sx9310_probe(struct i2c_client *client)
 					      iio_pollfunc_store_time,
 					      sx9310_trigger_handler,
 					      &sx9310_buffer_setup_ops);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return devm_iio_device_register(&client->dev, indio_dev);
-- 
2.28.0.163.g6104cc2f0b6-goog


  parent reply	other threads:[~2020-08-03 23:58 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-03 23:58 [PATCH v5 00/15] sx9310 iio driver updates Daniel Campello
2020-08-03 23:58 ` [PATCH v5 01/15] dt-bindings: iio: Add bindings for sx9310 sensor Daniel Campello
2020-08-06 18:14   ` Jonathan Cameron
2020-08-03 23:58 ` [PATCH v5 02/15] iio: sx9310: Update macros declarations Daniel Campello
2020-08-06 18:15   ` Jonathan Cameron
2020-08-03 23:58 ` [PATCH v5 03/15] iio: sx9310: Fix irq handling Daniel Campello
2020-08-04  7:26   ` Andy Shevchenko
2020-08-03 23:58 ` [PATCH v5 04/15] iio: sx9310: Remove acpi and of table macros Daniel Campello
2020-08-06 18:28   ` Jonathan Cameron
2020-08-03 23:58 ` [PATCH v5 05/15] iio: sx9310: Change from .probe to .probe_new Daniel Campello
2020-08-06 18:29   ` Jonathan Cameron
2020-08-03 23:58 ` [PATCH v5 06/15] iio: sx9310: Fixes various memory handling Daniel Campello
2020-08-06 18:29   ` Jonathan Cameron
2020-08-03 23:58 ` [PATCH v5 07/15] iio: sx9310: Use long instead of int for channel bitmaps Daniel Campello
2020-08-06 18:30   ` Jonathan Cameron
2020-08-16  9:36     ` Jonathan Cameron
2020-08-03 23:58 ` [PATCH v5 08/15] iio: sx9310: Use regmap_read_poll_timeout() for compensation Daniel Campello
2020-08-03 23:58 ` [PATCH v5 09/15] iio: sx9310: Update copyright Daniel Campello
2020-08-18  1:45   ` Daniel Campello
2020-08-22 10:34     ` Jonathan Cameron
2020-08-03 23:58 ` Daniel Campello [this message]
2020-08-03 23:58 ` [PATCH v5 11/15] iio: sx9310: Use variable to hold &client->dev Daniel Campello
2020-08-06 18:38   ` Jonathan Cameron
2020-08-03 23:58 ` [PATCH v5 12/15] iio: sx9310: Miscellaneous format fixes Daniel Campello
2020-08-03 23:58 ` [PATCH v5 13/15] iio: sx9310: Drop channel_users[] Daniel Campello
2020-08-03 23:58 ` [PATCH v5 14/15] iio: sx9310: Enable vdd and svdd regulators at probe Daniel Campello
2020-08-03 23:58 ` [PATCH v5 15/15] iio: sx9310: Use irq trigger flags from firmware Daniel Campello
2020-08-06 18:42   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200803175559.v5.10.I071b118136317d3ff77fc598079f21e4ed0e347f@changeid \
    --to=campello@chromium.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=gwendal@chromium.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).