linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org>
Subject: Re: [PATCH] iio: adc: ad7298: rework external ref setup & remove platform data
Date: Sat, 10 Oct 2020 18:01:51 +0100	[thread overview]
Message-ID: <20201010180151.0e85ba9e@archlinux> (raw)
In-Reply-To: <20201001141048.69050-1-alexandru.ardelean@analog.com>

On Thu, 1 Oct 2020 17:10:48 +0300
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:

> This change removes the old platform data for ad7298. It is only used to
> provide whether to use an external regulator as a reference.
> 
> So, the logic is inverted a bit. The driver now tries to obtain a
> regulator. If one is provided, then the external ref is used. The rest of
> the logic should work as before.
> 
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to poke at it.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/ad7298.c             | 17 +++++++++--------
>  include/linux/platform_data/ad7298.h | 19 -------------------
>  2 files changed, 9 insertions(+), 27 deletions(-)
>  delete mode 100644 include/linux/platform_data/ad7298.h
> 
> diff --git a/drivers/iio/adc/ad7298.c b/drivers/iio/adc/ad7298.c
> index 48d43cb0f932..fa1047f74a1f 100644
> --- a/drivers/iio/adc/ad7298.c
> +++ b/drivers/iio/adc/ad7298.c
> @@ -23,8 +23,6 @@
>  #include <linux/iio/trigger_consumer.h>
>  #include <linux/iio/triggered_buffer.h>
>  
> -#include <linux/platform_data/ad7298.h>
> -
>  #define AD7298_WRITE	BIT(15) /* write to the control register */
>  #define AD7298_REPEAT	BIT(14) /* repeated conversion enable */
>  #define AD7298_CH(x)	BIT(13 - (x)) /* channel select */
> @@ -283,7 +281,6 @@ static const struct iio_info ad7298_info = {
>  
>  static int ad7298_probe(struct spi_device *spi)
>  {
> -	struct ad7298_platform_data *pdata = spi->dev.platform_data;
>  	struct ad7298_state *st;
>  	struct iio_dev *indio_dev;
>  	int ret;
> @@ -294,14 +291,18 @@ static int ad7298_probe(struct spi_device *spi)
>  
>  	st = iio_priv(indio_dev);
>  
> -	if (pdata && pdata->ext_ref)
> +	st->reg = devm_regulator_get_optional(&spi->dev, "vref");
> +	if (!IS_ERR(st->reg)) {
>  		st->ext_ref = AD7298_EXTREF;
> +	} else {
> +		ret = PTR_ERR(st->reg);
> +		if (ret != -ENODEV)
> +			return ret;
>  
> -	if (st->ext_ref) {
> -		st->reg = devm_regulator_get(&spi->dev, "vref");
> -		if (IS_ERR(st->reg))
> -			return PTR_ERR(st->reg);
> +		st->reg = NULL;
> +	}
>  
> +	if (st->reg) {
>  		ret = regulator_enable(st->reg);
>  		if (ret)
>  			return ret;
> diff --git a/include/linux/platform_data/ad7298.h b/include/linux/platform_data/ad7298.h
> deleted file mode 100644
> index 3e0ffe2d5d3d..000000000000
> --- a/include/linux/platform_data/ad7298.h
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * AD7298 SPI ADC driver
> - *
> - * Copyright 2011 Analog Devices Inc.
> - */
> -
> -#ifndef __LINUX_PLATFORM_DATA_AD7298_H__
> -#define __LINUX_PLATFORM_DATA_AD7298_H__
> -
> -/**
> - * struct ad7298_platform_data - Platform data for the ad7298 ADC driver
> - * @ext_ref: Whether to use an external reference voltage.
> - **/
> -struct ad7298_platform_data {
> -	bool ext_ref;
> -};
> -
> -#endif /* IIO_ADC_AD7298_H_ */


      reply	other threads:[~2020-10-10 23:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-01 14:10 [PATCH] iio: adc: ad7298: rework external ref setup & remove platform data Alexandru Ardelean
2020-10-10 17:01 ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201010180151.0e85ba9e@archlinux \
    --to=jic23@kernel.org \
    --cc=alexandru.ardelean@analog.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).