linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Jonathan Cameron <jic23@kernel.org>,
	linux-iio@vger.kernel.org, Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	devicetree@vger.kernel.org, phone-devel@vger.kernel.org
Subject: Re: [PATCH v2] iio: accel: yamaha-yas: Add DT bindings
Date: Mon, 7 Dec 2020 13:44:20 -0600	[thread overview]
Message-ID: <20201207194420.GA692505@robh.at.kernel.org> (raw)
In-Reply-To: <20201117121810.830743-1-linus.walleij@linaro.org>

On Tue, Nov 17, 2020 at 01:18:10PM +0100, Linus Walleij wrote:
> This adds device tree bindings for the Yamaha YAS5xx
> magnetometers/compass sensors.
> 
> Cc: devicetree@vger.kernel.org
> Cc: phone-devel@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v1->v2:
> - Add Yamaha to the vendor list, I was surprised to find
>   they were not yet listed.
> 
> I am still working on the actual driver for the magnetometer
> but why not send out the DT bindings for review, the
> hardware variants are easy to describe. This makes it possibe
> for people to include these magnetometers in device
> trees.
> ---
>  .../bindings/iio/magnetometer/yamaha,yas.yaml | 80 +++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
>  2 files changed, 82 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml
> new file mode 100644
> index 000000000000..6fc4cfe4a417
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Yamaha YAS5xx magnetometer sensors
> +
> +maintainers:
> +  - Linus Walleij <linus.walleij@linaro.org>
> +
> +description:
> +  The Yamaha YAS5xx magnetometers is a line of 3-axis magnetometers
> +  first introduced by Yamaha in 2006 with the YAS529. Over the years
> +  this magnetometer has been minatyrized and appeared in a number of
> +  different variants.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:

Don't need oneOf when there's only 1 entry.

> +          - yamaha,yas529
> +          - yamaha,yas530
> +          - yamaha,yas532
> +          - yamaha,yas533
> +          - yamaha,yas535
> +          - yamaha,yas536
> +          - yamaha,yas537
> +          - yamaha,yas539
> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: The YAS5xx sensors has a RSTN pin used to reset
> +      the logic inside the sensor. This GPIO line should connect
> +      to that pin and be marked as GPIO_ACTIVE_LOW.
> +
> +  interrupts:
> +    maxItems: 1
> +    description: Interrupt for INT pin for variants that support
> +      interrupt generation. This polarity, whether the interrupt
> +      is active on the rising or the falling edge, is configurable
> +      in the hardware.
> +
> +  vdd-supply:
> +    description: An optional regulator providing core power supply
> +      on the VDD pin, typically 1.8 V or 3.0 V.
> +
> +  iovdd-supply:
> +    description: An optional regulator providing I/O power supply
> +      for the I2C interface on the IOVDD pin, typically 1.8 V.
> +      This is not present on all variants of the component, some
> +      have only the VDD voltage.
> +
> +  mount-matrix:
> +    description: An optional 3x3 mounting rotation matrix.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        magnetometer@2e {
> +          compatible = "yamaha,yas530";
> +          reg = <0x2e>;
> +          vdd-supply = <&ldo1_reg>;
> +          iovdd-supply = <&ldo2_reg>;
> +          reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 2735be1a8470..0340674c72bd 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -1210,6 +1210,8 @@ patternProperties:
>      description: Shenzhen Xunlong Software CO.,Limited
>    "^xylon,.*":
>      description: Xylon
> +  "^yamaha,.*":
> +    description: Yamaha Corporation
>    "^ylm,.*":
>      description: Shenzhen Yangliming Electronic Technology Co., Ltd.
>    "^yna,.*":
> -- 
> 2.26.2
> 

      parent reply	other threads:[~2020-12-07 19:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-17 12:18 [PATCH v2] iio: accel: yamaha-yas: Add DT bindings Linus Walleij
2020-11-21 16:01 ` Jonathan Cameron
2020-12-07 19:44 ` Rob Herring [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201207194420.GA692505@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).