From: Sean Nyekjaer <sean@geanix.com>
To: jic23@kernel.org, linux-iio@vger.kernel.org,
andy.shevchenko@gmail.com, lars@metafoo.de, Nuno.Sa@analog.com,
robh+dt@kernel.org, devicetree@vger.kernel.org,
tomas.melin@vaisala.com
Cc: Sean Nyekjaer <sean@geanix.com>
Subject: [PATCH v5 2/6] dt-bindings: iio: accel: fxls8962af: add bindings
Date: Thu, 6 May 2021 09:09:36 +0200 [thread overview]
Message-ID: <20210506070940.312959-2-sean@geanix.com> (raw)
In-Reply-To: <20210506070940.312959-1-sean@geanix.com>
Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF
accelerometer sensor.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
Changes for v2:
- removed requirement for interrupt
Changes for v3:
- None
Changes for v4:
- Included the dt patch from the RFC
Changes for v5:
- fixed interrupt enum
.../bindings/iio/accel/nxp,fxls8962af.yaml | 80 +++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
new file mode 100644
index 000000000000..ad529ab2c6e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver
+
+maintainers:
+ - Sean Nyekjaer <sean@geanix.com>
+
+description: |
+ NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports
+ SPI and I2C interface.
+ https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
+ https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
+
+properties:
+ compatible:
+ enum:
+ - nxp,fxls8962af
+ - nxp,fxls8964af
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: phandle to the regulator that provides power to the accelerometer
+
+ spi-max-frequency: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ enum:
+ - INT1
+ - INT2
+
+ drive-open-drain:
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Example for a I2C device node */
+ accelerometer@62 {
+ compatible = "nxp,fxls8962af";
+ reg = <0x62>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "INT1";
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Example for a SPI device node */
+ accelerometer@0 {
+ compatible = "nxp,fxls8962af";
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "INT1";
+ };
+ };
--
2.31.0
next prev parent reply other threads:[~2021-05-06 7:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 7:09 [PATCH v5 1/6] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers Sean Nyekjaer
2021-05-06 7:09 ` Sean Nyekjaer [this message]
2021-05-07 0:52 ` [PATCH v5 2/6] dt-bindings: iio: accel: fxls8962af: add bindings Rob Herring
2021-05-06 7:09 ` [PATCH v5 3/6] iio: accel: fxls8962af: add set/get of samplerate Sean Nyekjaer
2021-05-06 7:09 ` [PATCH v5 4/6] iio: accel: fxls8962af: add interrupt support Sean Nyekjaer
2021-05-06 7:09 ` [PATCH v5 5/6] iio: accel: fxls8962af: add hw buffered sampling Sean Nyekjaer
2021-05-08 16:39 ` Jonathan Cameron
2021-05-10 7:54 ` Sean Nyekjaer
2021-05-10 13:39 ` Jonathan Cameron
2021-05-10 17:01 ` Sean Nyekjaer
2021-05-06 7:09 ` [PATCH v5 6/6] iio: accel: fxls8962af: fix errata bug E3 - I2C burst reads Sean Nyekjaer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210506070940.312959-2-sean@geanix.com \
--to=sean@geanix.com \
--cc=Nuno.Sa@analog.com \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tomas.melin@vaisala.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).