linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <eugen.hristev@microchip.com>, <jic23@kernel.org>,
	<lars@metafoo.de>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>,
	<robh+dt@kernel.org>, <krzk+dt@kernel.org>
Cc: <linux-iio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v2 06/19] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions
Date: Tue, 28 Jun 2022 18:16:18 +0300	[thread overview]
Message-ID: <20220628151631.3116454-7-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20220628151631.3116454-1-claudiu.beznea@microchip.com>

SAMA7G5 introduces 64 and 256 oversampling rates. Due to this EMR.OSR is 3
bits long. Change the code to reflect this. Commit prepares the code
for the addition of 64 and 256 oversampling rates.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 31 +++++++++++++++++-------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index cd2b8190a8da..692707b6e3e3 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -138,8 +138,7 @@ struct at91_adc_reg_layout {
 /* Extended Mode Register */
 	u16				EMR;
 /* Extended Mode Register - Oversampling rate */
-#define AT91_SAMA5D2_EMR_OSR(V)			((V) << 16)
-#define AT91_SAMA5D2_EMR_OSR_MASK		GENMASK(17, 16)
+#define AT91_SAMA5D2_EMR_OSR(V, M)		(((V) << 16) & (M))
 #define AT91_SAMA5D2_EMR_OSR_1SAMPLES		0
 #define AT91_SAMA5D2_EMR_OSR_4SAMPLES		1
 #define AT91_SAMA5D2_EMR_OSR_16SAMPLES		2
@@ -403,6 +402,7 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
  * @max_index:		highest channel index (highest index may be higher
  *			than the total channel number)
  * @hw_trig_cnt:	number of possible hardware triggers
+ * @osr_mask:		oversampling ratio bitmask on EMR register
  */
 struct at91_adc_platform {
 	const struct at91_adc_reg_layout	*layout;
@@ -414,6 +414,7 @@ struct at91_adc_platform {
 	unsigned int				max_channels;
 	unsigned int				max_index;
 	unsigned int				hw_trig_cnt;
+	unsigned int				osr_mask;
 };
 
 /**
@@ -612,6 +613,7 @@ static const struct at91_adc_platform sama5d2_platform = {
 	.max_index = AT91_SAMA5D2_MAX_CHAN_IDX,
 #define AT91_SAMA5D2_HW_TRIG_CNT	3
 	.hw_trig_cnt = AT91_SAMA5D2_HW_TRIG_CNT,
+	.osr_mask = GENMASK(17, 16),
 };
 
 static const struct at91_adc_platform sama7g5_platform = {
@@ -627,6 +629,7 @@ static const struct at91_adc_platform sama7g5_platform = {
 	.max_index = AT91_SAMA7G5_MAX_CHAN_IDX,
 #define AT91_SAMA7G5_HW_TRIG_CNT	3
 	.hw_trig_cnt = AT91_SAMA7G5_HW_TRIG_CNT,
+	.osr_mask = GENMASK(18, 16),
 };
 
 static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan)
@@ -725,30 +728,32 @@ static void at91_adc_eoc_ena(struct at91_adc_state *st, unsigned int channel)
 		at91_adc_writel(st, EOC_IER, BIT(channel));
 }
 
-static void at91_adc_config_emr(struct at91_adc_state *st)
+static void at91_adc_config_emr(struct at91_adc_state *st,
+				u32 oversampling_ratio)
 {
 	/* configure the extended mode register */
 	unsigned int emr = at91_adc_readl(st, EMR);
+	unsigned int osr_mask = st->soc_info.platform->osr_mask;
 
 	/* select oversampling per single trigger event */
 	emr |= AT91_SAMA5D2_EMR_ASTE(1);
 
 	/* delete leftover content if it's the case */
-	emr &= ~AT91_SAMA5D2_EMR_OSR_MASK;
+	emr &= ~osr_mask;
 
 	/* select oversampling ratio from configuration */
-	switch (st->oversampling_ratio) {
+	switch (oversampling_ratio) {
 	case AT91_OSR_1SAMPLES:
-		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) &
-		       AT91_SAMA5D2_EMR_OSR_MASK;
+		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES,
+					    osr_mask);
 		break;
 	case AT91_OSR_4SAMPLES:
-		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) &
-		       AT91_SAMA5D2_EMR_OSR_MASK;
+		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES,
+					    osr_mask);
 		break;
 	case AT91_OSR_16SAMPLES:
-		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) &
-		       AT91_SAMA5D2_EMR_OSR_MASK;
+		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES,
+					    osr_mask);
 		break;
 	}
 
@@ -1658,7 +1663,7 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
 		mutex_lock(&st->lock);
 		st->oversampling_ratio = val;
 		/* update ratio */
-		at91_adc_config_emr(st);
+		at91_adc_config_emr(st, val);
 		mutex_unlock(&st->lock);
 		iio_device_release_direct_mode(indio_dev);
 		return 0;
@@ -1838,7 +1843,7 @@ static void at91_adc_hw_init(struct iio_dev *indio_dev)
 	at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate);
 
 	/* configure extended mode register */
-	at91_adc_config_emr(st);
+	at91_adc_config_emr(st, st->oversampling_ratio);
 }
 
 static ssize_t at91_adc_get_fifo_state(struct device *dev,
-- 
2.34.1


  parent reply	other threads:[~2022-06-28 15:14 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-28 15:16 [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 01/19] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch Claudiu Beznea
2022-07-16 16:25   ` Jonathan Cameron
2022-07-16 16:26     ` Jonathan Cameron
2022-06-28 15:16 ` [PATCH v2 03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 04/19] iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 05/19] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled Claudiu Beznea
2022-06-28 15:16 ` Claudiu Beznea [this message]
2022-06-28 15:16 ` [PATCH v2 07/19] iio: adc: at91-sama5d2_adc: move the check of oversampling in its function Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 08/19] iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 09/19] iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 10/19] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 11/19] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 12/19] iio: adc: at91-sama5d2_adc: move oversampling storage in its function Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 13/19] iio: adc: at91-sama5d2_adc: update trackx on emr Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 14/19] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq() Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 15/19] iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw() Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 16/19] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor Claudiu Beznea
2022-07-16 16:35   ` Jonathan Cameron
2022-06-28 15:16 ` [PATCH v2 18/19] iio: adc: at91-sama5d2_adc: add empty line after functions Claudiu Beznea
2022-06-28 15:16 ` [PATCH v2 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support Claudiu Beznea
2022-07-31 20:11   ` Jonathan Cameron
2022-08-01  9:44     ` Claudiu.Beznea
2022-07-16 16:42 ` [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor Jonathan Cameron
2022-07-31 20:13   ` Jonathan Cameron
2022-08-01  9:46     ` Claudiu.Beznea
2022-08-03 10:30       ` Claudiu.Beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220628151631.3116454-7-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eugen.hristev@microchip.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).