From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: jic23@kernel.org
Cc: kernel@pengutronix.de, linux-stm32@st-md-mailman.stormreply.com,
a.fatoum@pengutronix.de, kamel.bouhara@bootlin.com,
gwendal@chromium.org, alexandre.belloni@bootlin.com,
david@lechnology.com, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, syednwaris@gmail.com,
patrick.havelange@essensium.com, fabrice.gasnier@st.com,
mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
o.rempel@pengutronix.de,
William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [PATCH v8 01/22] docs: counter: Consolidate Counter sysfs attributes documentation
Date: Fri, 12 Feb 2021 21:13:25 +0900 [thread overview]
Message-ID: <362a71a1eba98108d009db8c929170a6ed8cf110.1613131238.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1613131238.git.vilhelm.gray@gmail.com>
Duplicate ABIs are not valid, so let's consolidate these sysfs
attributes into the main sysfs-bus-counter documentation file.
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
Documentation/ABI/testing/sysfs-bus-counter | 76 ++++++++++++++++++-
.../ABI/testing/sysfs-bus-counter-104-quad-8 | 61 ---------------
.../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 ----
MAINTAINERS | 4 +-
4 files changed, 75 insertions(+), 82 deletions(-)
delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
index 566bd99fe0a5..29f54484183f 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter
+++ b/Documentation/ABI/testing/sysfs-bus-counter
@@ -57,6 +57,7 @@ Description:
What: /sys/bus/counter/devices/counterX/countY/count_mode_available
What: /sys/bus/counter/devices/counterX/countY/error_noise_available
What: /sys/bus/counter/devices/counterX/countY/function_available
+What: /sys/bus/counter/devices/counterX/countY/prescaler_available
What: /sys/bus/counter/devices/counterX/countY/signalZ_action_available
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
@@ -154,6 +155,15 @@ Description:
Count Y. If possible, this should match the name of the
respective channel as it appears in the device datasheet.
+What: /sys/bus/counter/devices/counterX/countY/prescaler
+KernelVersion: 5.2
+Contact: linux-iio@vger.kernel.org
+Description:
+ Configure the prescaler value associated with Count Y.
+ On the FlexTimer, the counter clock source passes through a
+ prescaler (i.e. a counter). This acts like a clock
+ divider.
+
What: /sys/bus/counter/devices/counterX/countY/preset
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
@@ -215,11 +225,45 @@ Description:
Read-only attribute that indicates the total number of Signals
belonging to the Counter.
-What: /sys/bus/counter/devices/counterX/signalY/signal
+What: /sys/bus/counter/devices/counterX/signalY/cable_fault
+KernelVersion: 5.7
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read-only attribute that indicates whether a differential
+ encoder cable fault (not connected or loose wires) is detected
+ for the respective channel of Signal Y. Valid attribute values
+ are boolean. Detection must first be enabled via the
+ corresponding cable_fault_enable attribute.
+
+What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable
+KernelVersion: 5.7
+Contact: linux-iio@vger.kernel.org
+Description:
+ Whether detection of differential encoder cable faults for the
+ respective channel of Signal Y is enabled. Valid attribute
+ values are boolean.
+
+What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler
+KernelVersion: 5.7
+Contact: linux-iio@vger.kernel.org
+Description:
+ Filter clock factor for input Signal Y. This prescaler value
+ affects the inputs of both quadrature pair signals.
+
+What: /sys/bus/counter/devices/counterX/signalY/index_polarity
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
Description:
- Signal data of Signal Y represented as a string.
+ Active level of index input Signal Y; irrelevant in
+ non-synchronous load mode.
+
+What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available
+What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
+KernelVersion: 5.2
+Contact: linux-iio@vger.kernel.org
+Description:
+ Discrete set of available values for the respective Signal Y
+ configuration are listed in this file.
What: /sys/bus/counter/devices/counterX/signalY/name
KernelVersion: 5.2
@@ -228,3 +272,31 @@ Description:
Read-only attribute that indicates the device-specific name of
Signal Y. If possible, this should match the name of the
respective signal as it appears in the device datasheet.
+
+What: /sys/bus/counter/devices/counterX/signalY/signal
+KernelVersion: 5.2
+Contact: linux-iio@vger.kernel.org
+Description:
+ Signal data of Signal Y represented as a string.
+
+What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode
+KernelVersion: 5.2
+Contact: linux-iio@vger.kernel.org
+Description:
+ Configure the counter associated with Signal Y for
+ non-synchronous or synchronous load mode. Synchronous load mode
+ cannot be selected in non-quadrature (Pulse-Direction) clock
+ mode.
+
+ non-synchronous:
+ A logic low level is the active level at this index
+ input. The index function (as enabled via preset_enable)
+ is performed directly on the active level of the index
+ input.
+
+ synchronous:
+ Intended for interfacing with encoder Index output in
+ quadrature clock mode. The active level is configured
+ via index_polarity. The index function (as enabled via
+ preset_enable) is performed synchronously with the
+ quadrature clock on the active level of the index input.
diff --git a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
deleted file mode 100644
index eac32180c40d..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
+++ /dev/null
@@ -1,61 +0,0 @@
-What: /sys/bus/counter/devices/counterX/signalY/cable_fault
-KernelVersion: 5.7
-Contact: linux-iio@vger.kernel.org
-Description:
- Read-only attribute that indicates whether a differential
- encoder cable fault (not connected or loose wires) is detected
- for the respective channel of Signal Y. Valid attribute values
- are boolean. Detection must first be enabled via the
- corresponding cable_fault_enable attribute.
-
-What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable
-KernelVersion: 5.7
-Contact: linux-iio@vger.kernel.org
-Description:
- Whether detection of differential encoder cable faults for the
- respective channel of Signal Y is enabled. Valid attribute
- values are boolean.
-
-What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler
-KernelVersion: 5.7
-Contact: linux-iio@vger.kernel.org
-Description:
- Filter clock factor for input Signal Y. This prescaler value
- affects the inputs of both quadrature pair signals.
-
-What: /sys/bus/counter/devices/counterX/signalY/index_polarity
-KernelVersion: 5.2
-Contact: linux-iio@vger.kernel.org
-Description:
- Active level of index input Signal Y; irrelevant in
- non-synchronous load mode.
-
-What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available
-What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
-KernelVersion: 5.2
-Contact: linux-iio@vger.kernel.org
-Description:
- Discrete set of available values for the respective Signal Y
- configuration are listed in this file.
-
-What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode
-KernelVersion: 5.2
-Contact: linux-iio@vger.kernel.org
-Description:
- Configure the counter associated with Signal Y for
- non-synchronous or synchronous load mode. Synchronous load mode
- cannot be selected in non-quadrature (Pulse-Direction) clock
- mode.
-
- non-synchronous:
- A logic low level is the active level at this index
- input. The index function (as enabled via preset_enable)
- is performed directly on the active level of the index
- input.
-
- synchronous:
- Intended for interfacing with encoder Index output in
- quadrature clock mode. The active level is configured
- via index_polarity. The index function (as enabled via
- preset_enable) is performed synchronously with the
- quadrature clock on the active level of the index input.
diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
deleted file mode 100644
index 7d2e7b363467..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
+++ /dev/null
@@ -1,16 +0,0 @@
-What: /sys/bus/counter/devices/counterX/countY/prescaler_available
-KernelVersion: 5.2
-Contact: linux-iio@vger.kernel.org
-Description:
- Discrete set of available values for the respective Count Y
- configuration are listed in this file. Values are delimited by
- newline characters.
-
-What: /sys/bus/counter/devices/counterX/countY/prescaler
-KernelVersion: 5.2
-Contact: linux-iio@vger.kernel.org
-Description:
- Configure the prescaler value associated with Count Y.
- On the FlexTimer, the counter clock source passes through a
- prescaler (i.e. a counter). This acts like a clock
- divider.
diff --git a/MAINTAINERS b/MAINTAINERS
index e697044d34d6..d858582c917b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -297,7 +297,6 @@ M: William Breathitt Gray <vilhelm.gray@gmail.com>
M: Syed Nayyar Waris <syednwaris@gmail.com>
L: linux-iio@vger.kernel.org
S: Maintained
-F: Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
F: drivers/counter/104-quad-8.c
ACCES PCI-IDIO-16 GPIO DRIVER
@@ -4540,7 +4539,7 @@ COUNTER SUBSYSTEM
M: William Breathitt Gray <vilhelm.gray@gmail.com>
L: linux-iio@vger.kernel.org
S: Maintained
-F: Documentation/ABI/testing/sysfs-bus-counter*
+F: Documentation/ABI/testing/sysfs-bus-counter
F: Documentation/driver-api/generic-counter.rst
F: drivers/counter/
F: include/linux/counter.h
@@ -6925,7 +6924,6 @@ FLEXTIMER FTM-QUADDEC DRIVER
M: Patrick Havelange <patrick.havelange@essensium.com>
L: linux-iio@vger.kernel.org
S: Maintained
-F: Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
F: Documentation/devicetree/bindings/counter/ftm-quaddec.txt
F: drivers/counter/ftm-quaddec.c
--
2.30.0
next prev parent reply other threads:[~2021-02-12 12:15 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-12 12:13 [PATCH v8 00/22] Introduce the Counter character device interface William Breathitt Gray
2021-02-12 12:13 ` William Breathitt Gray [this message]
2021-02-14 16:57 ` [PATCH v8 01/22] docs: counter: Consolidate Counter sysfs attributes documentation Jonathan Cameron
2021-02-15 11:05 ` William Breathitt Gray
2021-02-20 16:25 ` David Lechner
2021-02-12 12:13 ` [PATCH v8 02/22] docs: counter: Fix spelling William Breathitt Gray
2021-02-20 16:26 ` David Lechner
2021-02-12 12:13 ` [PATCH v8 03/22] counter: 104-quad-8: Return error when invalid mode during ceiling_write William Breathitt Gray
2021-02-20 16:30 ` David Lechner
2021-02-22 2:06 ` William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 04/22] counter: 104-quad-8: Annotate hardware config module parameter William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 05/22] counter: 104-quad-8: Add const qualifiers for quad8_preset_register_set William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 06/22] counter: 104-quad-8: Add const qualifier for functions_list array William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 07/22] counter: 104-quad-8: Add const qualifier for actions_list array William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 08/22] counter: ftm-quaddec: " William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 09/22] counter: Return error code on invalid modes William Breathitt Gray
2021-02-14 17:07 ` Jonathan Cameron
2021-02-20 16:43 ` David Lechner
2021-02-22 4:42 ` William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 10/22] counter: Standardize to ERANGE for limit exceeded errors William Breathitt Gray
2021-02-14 17:10 ` Jonathan Cameron
2021-02-16 1:26 ` William Breathitt Gray
2021-02-21 14:03 ` Jonathan Cameron
2021-02-20 16:48 ` David Lechner
2021-02-12 12:13 ` [PATCH v8 11/22] counter: Rename counter_signal_value to counter_signal_level William Breathitt Gray
2021-02-20 16:52 ` David Lechner
2021-02-12 12:13 ` [PATCH v8 12/22] counter: Rename counter_count_function to counter_function William Breathitt Gray
2021-02-14 17:13 ` Jonathan Cameron
2021-02-20 16:56 ` David Lechner
2021-02-23 5:14 ` William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 14/22] counter: Update counter.h comments to reflect sysfs internalization William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 15/22] docs: counter: Update " William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 16/22] counter: Move counter enums to uapi header William Breathitt Gray
2021-02-20 23:55 ` David Lechner
2021-02-12 12:13 ` [PATCH v8 17/22] counter: Add character device interface William Breathitt Gray
2021-02-14 18:06 ` Jonathan Cameron
2021-02-24 5:34 ` William Breathitt Gray
2021-02-15 9:24 ` Oleksij Rempel
2021-02-16 1:53 ` William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 18/22] docs: counter: Document " William Breathitt Gray
2021-02-14 17:48 ` Jonathan Cameron
2021-02-22 10:11 ` Pavel Machek
2021-02-26 0:27 ` William Breathitt Gray
2021-02-26 0:22 ` William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 19/22] counter: Implement extension*_name sysfs attributes William Breathitt Gray
2021-02-14 18:09 ` Jonathan Cameron
2021-02-19 8:51 ` William Breathitt Gray
2021-02-21 14:05 ` Jonathan Cameron
2021-02-25 23:32 ` William Breathitt Gray
2021-02-27 15:14 ` Jonathan Cameron
2021-02-12 12:13 ` [PATCH v8 20/22] counter: Implement events_queue_size sysfs attribute William Breathitt Gray
2021-02-14 18:11 ` Jonathan Cameron
2021-02-18 10:32 ` William Breathitt Gray
2021-02-21 15:51 ` Jonathan Cameron
2021-02-26 0:03 ` William Breathitt Gray
2021-02-27 0:14 ` David Lechner
2021-02-27 0:20 ` William Breathitt Gray
2021-02-27 15:18 ` Jonathan Cameron
2021-02-28 2:46 ` William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 21/22] counter: 104-quad-8: Replace mutex with spinlock William Breathitt Gray
2021-02-14 18:19 ` Jonathan Cameron
2021-02-16 2:16 ` William Breathitt Gray
2021-02-16 19:27 ` Jonathan Cameron
2021-02-18 10:16 ` William Breathitt Gray
2021-02-12 12:13 ` [PATCH v8 22/22] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8 William Breathitt Gray
2021-02-14 18:24 ` Jonathan Cameron
2021-02-19 9:21 ` William Breathitt Gray
[not found] ` <3fc2580af0efd6312a64a0e107bd6fa758f0d466.1613131238.git.vilhelm.gray@gmail.com>
2021-02-14 17:32 ` [PATCH v8 13/22] counter: Internalize sysfs interface code Jonathan Cameron
2021-02-20 17:50 ` David Lechner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=362a71a1eba98108d009db8c929170a6ed8cf110.1613131238.git.vilhelm.gray@gmail.com \
--to=vilhelm.gray@gmail.com \
--cc=a.fatoum@pengutronix.de \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@st.com \
--cc=david@lechnology.com \
--cc=fabrice.gasnier@st.com \
--cc=gwendal@chromium.org \
--cc=jic23@kernel.org \
--cc=kamel.bouhara@bootlin.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=o.rempel@pengutronix.de \
--cc=patrick.havelange@essensium.com \
--cc=syednwaris@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).