linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: jic23@kernel.org
Cc: lorenzo.bianconi@redhat.com, linux-iio@vger.kernel.org, sean@geanix.com
Subject: [PATCH] iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
Date: Thu, 28 Nov 2019 17:42:30 +0200	[thread overview]
Message-ID: <844cd314df8ff354859bad1e43b13778f60b08bb.1574954314.git.lorenzo@kernel.org> (raw)

Track hw FIFO state introducing fifo_mask since now the accel sensor
can be enabled during suspend/resume in order to trigger the wake-up
enabling the FIFO in st_lsm6dsx_resume even if it was disabled before
the suspend

Fixes: 4c997dfa692d ("iio: imu: st_lsm6dsx: add wakeup-source option")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h       |  4 +--
 .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    | 25 +++++++++++--------
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  |  4 +--
 3 files changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index c605b153be41..b54aefcdaad4 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -351,9 +351,9 @@ struct st_lsm6dsx_sensor {
  * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
  * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
  * @page_lock: Mutex to prevent concurrent memory page configuration.
- * @fifo_mode: FIFO operating mode supported by the device.
  * @suspend_mask: Suspended sensor bitmask.
  * @enable_mask: Enabled sensor bitmask.
+ * @fifo_mask: Enabled hw FIFO bitmask.
  * @ts_gain: Hw timestamp rate after internal calibration.
  * @ts_sip: Total number of timestamp samples in a given pattern.
  * @sip: Total number of samples (acc/gyro/ts) in a given pattern.
@@ -373,9 +373,9 @@ struct st_lsm6dsx_hw {
 	struct mutex conf_lock;
 	struct mutex page_lock;
 
-	enum st_lsm6dsx_fifo_mode fifo_mode;
 	u8 suspend_mask;
 	u8 enable_mask;
+	u8 fifo_mask;
 	s64 ts_gain;
 	u8 ts_sip;
 	u8 sip;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index d416990ae309..bfd4c6306c0b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -176,17 +176,10 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
 			     enum st_lsm6dsx_fifo_mode fifo_mode)
 {
 	unsigned int data;
-	int err;
 
 	data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
-	err = st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
-					    ST_LSM6DSX_FIFO_MODE_MASK, data);
-	if (err < 0)
-		return err;
-
-	hw->fifo_mode = fifo_mode;
-
-	return 0;
+	return st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
+					     ST_LSM6DSX_FIFO_MODE_MASK, data);
 }
 
 static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
@@ -608,11 +601,17 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
 int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
 {
 	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u8 fifo_mask;
 	int err;
 
 	mutex_lock(&hw->conf_lock);
 
-	if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) {
+	if (enable)
+		fifo_mask = hw->fifo_mask | BIT(sensor->id);
+	else
+		fifo_mask = hw->fifo_mask & ~BIT(sensor->id);
+
+	if (hw->fifo_mask) {
 		err = st_lsm6dsx_flush_fifo(hw);
 		if (err < 0)
 			goto out;
@@ -642,15 +641,19 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
 	if (err < 0)
 		goto out;
 
-	if (hw->enable_mask) {
+	if (fifo_mask) {
 		/* reset hw ts counter */
 		err = st_lsm6dsx_reset_hw_ts(hw);
 		if (err < 0)
 			goto out;
 
 		err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
+		if (err < 0)
+			goto out;
 	}
 
+	hw->fifo_mask = fifo_mask;
+
 out:
 	mutex_unlock(&hw->conf_lock);
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 11b2c7bc8041..6f628c3cd133 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -2300,7 +2300,7 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
 		hw->suspend_mask |= BIT(sensor->id);
 	}
 
-	if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
+	if (hw->fifo_mask)
 		err = st_lsm6dsx_flush_fifo(hw);
 
 	return err;
@@ -2336,7 +2336,7 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
 		hw->suspend_mask &= ~BIT(sensor->id);
 	}
 
-	if (hw->enable_mask)
+	if (hw->fifo_mask)
 		err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
 
 	return err;
-- 
2.21.0


             reply	other threads:[~2019-11-28 15:42 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-28 15:42 Lorenzo Bianconi [this message]
2019-11-29  9:13 ` [PATCH] iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask Sean Nyekjaer
2019-12-01 20:49 ` Jonathan Cameron
2019-12-01 21:04   ` Lorenzo Bianconi
2019-12-01 21:16     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=844cd314df8ff354859bad1e43b13778f60b08bb.1574954314.git.lorenzo@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=sean@geanix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).