messages from 2019-11-15 13:04:53 to 2019-11-30 15:44:29 UTC [more...]
Doubts in getting started with the Analog AD7928 driver
2019-11-30 15:44 UTC (9+ messages)
iio_compute_scan_bytes does not seem to account for alignment if first channel uses more storagebits than its successors
2019-11-29 17:23 UTC (2+ messages)
[PATCH v3] iio: adc: ad799x: add pm_ops to disable the device completely
2019-11-29 16:53 UTC
[PATCH] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
2019-11-29 9:37 UTC
[RFC/RFT] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
2019-11-29 9:19 UTC (3+ messages)
[PATCH] iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
2019-11-29 9:13 UTC (2+ messages)
[PATCH] iio: imu: st_lsm6dsx: fix checkpatch warning
2019-11-29 8:46 UTC
[PATCH 0/3] Add support for DLH pressure sensors
2019-11-29 7:34 UTC (7+ messages)
` [PATCH 2/3] dt-bindings: Add asc vendor
` [PATCH v2 0/3] Add support for DLH pressure sensors
` [PATCH v2 1/3] iio: pressure: Add driver "
` [PATCH v2 2/3] dt-bindings: Add asc vendor
` [PATCH v2 3/3] bindings: iio: pressure: Add dlh-i2c documentation
[PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
2019-11-29 7:02 UTC (5+ messages)
[PATCH v2 1/2] Driver for TI HDC20x0 humidity and temperature sensors
2019-11-28 20:12 UTC (2+ messages)
` [PATCH v2 2/2] "
[PATCH] iio: imu: st_lsm6dsx: fix decimation factor estimation
2019-11-28 15:55 UTC
[PATCH v2] iio: adc: ad799x: add pm_ops to disable the device completely
2019-11-28 9:47 UTC (3+ messages)
[PATCH v2] iio: imu: inv_mpu6050: Select I2C_MUX again
2019-11-28 8:46 UTC (2+ messages)
[PATCH] iio: imu: inv_mpu6050: Select I2C_MUX again
2019-11-27 20:12 UTC
[PATCH] dt-bindings: iio: adc: convert sd modulator to json-schema
2019-11-27 17:16 UTC
[PATCH] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
2019-11-27 16:48 UTC
[PATCH v2] iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
2019-11-27 16:13 UTC (2+ messages)
[PATCH v2] iio: adc: stm32-dfsdm: fix single conversion
2019-11-27 16:13 UTC (2+ messages)
[INTERNAL][PATCH] iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
2019-11-27 10:07 UTC
[INTERNAL][PATCH] iio: adc: stm32-dfsdm: fix single conversion
2019-11-27 10:06 UTC
[PATCH v2 1/2] iio: imu: inv_mpu6050: fix temperature reporting using bad unit
2019-11-26 16:19 UTC
Problem about Read Multiple Raw Function
2019-11-26 15:16 UTC (2+ messages)
[PATCH] platform/chrome: cros_ec: Rename cros_ec_dev to cros_ec_mfd_dev
2019-11-25 16:00 UTC (3+ messages)
[PATCH v2] iio: adc: ad7887: Cleanup channel assignment
2019-11-25 13:21 UTC
[PATCH v2 1/4] iio: adc: Add support for AD7091R5 ADC
2019-11-25 11:26 UTC (2+ messages)
[PATCH] iio: adc: intel_mrfld_adc: Allocating too much data in probe()
2019-11-25 9:33 UTC (4+ messages)
[PATCH] iio: adc: stm32-adc: Add check on overrun interrupt
2019-11-25 8:42 UTC (3+ messages)
[PATCH v4 3/4] iio: ping: add parallax ping sensors
2019-11-25 8:05 UTC
[PATCH v4 0/4] iio: add driver for ping))) and laserping sensors
2019-11-25 8:03 UTC
[PATCH v5 1/2] staging: iio: accel: adis16240: enforce SPI mode on probe function
2019-11-25 7:55 UTC (3+ messages)
` [PATCH v5 2/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
[PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
2019-11-25 7:51 UTC (3+ messages)
[PATCH v3 0/2] iio: add driver for Bosch BMA400 accelerometer
2019-11-24 22:37 UTC (8+ messages)
` [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
[PATCH v3 0/3] iio: adc: add support for ltc2496
2019-11-24 19:11 UTC (6+ messages)
` [PATCH v3 1/3] iio: adc: ltc2496: provide device tree binding document
` [PATCH v3 2/3] iio: adc: ltc2497: split protocol independent part in a separate module
` [PATCH v3 3/3] iio: adc: new driver to support Linear technology's ltc2496
[PATCH] iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
2019-11-23 16:47 UTC (3+ messages)
[PATCH] iio: trigger: stm32-timer: remove unnecessary update event
2019-11-23 16:43 UTC (2+ messages)
[PATCH] iio: adc: ad7887: Cleanup channel assignment
2019-11-23 16:39 UTC (2+ messages)
[PATCH] iio: adc: max1027: fix not unregistered iio trigger
2019-11-23 16:29 UTC (2+ messages)
[PATCH 1/2] iio: imu: inv_mpu6050: fix temperature reporting using bad unit
2019-11-23 16:22 UTC (4+ messages)
` [PATCH 2/2] iio: imu: inv_mpu6050: add fifo temperature data support
[PATCH V3] iio: adc: ad7124: Fix enabling of internal reference
2019-11-23 14:47 UTC (2+ messages)
[PATCH v2] iio: Fix Kconfig indentation
2019-11-23 14:45 UTC (2+ messages)
[PATCH V2] iio: adc: ad7124: Enable internal reference
2019-11-23 14:38 UTC (2+ messages)
[PATCH v3 4/4] MAINTAINERS: add maintainer for ping iio sensors
2019-11-23 14:37 UTC (2+ messages)
[PATCH v3 3/4] iio: ping: add parallax ping sensors
2019-11-23 14:35 UTC (2+ messages)
[PATCH v3 2/4] dt-bindings: add parallax ping sensors
2019-11-23 14:34 UTC (2+ messages)
[PATCH v3 1/4] dt-bindings: add vendor prefix parallax
2019-11-23 14:32 UTC (2+ messages)
[PATCH] iio: dac: ad7303: use regulator get optional to check for ext supply
2019-11-23 14:22 UTC (4+ messages)
` [PATCH v2] "
[PATCH 0/1] Add support for TI HDC200x humidity and temperature sensors
2019-11-23 14:15 UTC (3+ messages)
[PATCH 0/3] iio: max31856: provide more configuration options
2019-11-23 12:46 UTC (33+ messages)
` [v2 0/9] "
` [v2 1/9] iio: max31856: add option for setting mains filter rejection frequency
` [v2 4/9] RFC: iio: core: add char type for sysfs attributes
` [v2 6/9] Documentation: ABI: document IIO thermocouple_type file
` [v2 7/9] iio: max31856: add support for runtime-configuring the thermocouple type
` [v2 8/9] RFC/RFT: iio: maxim_thermocouple: add thermocouple_type sysfs attribute
` [v3 0/9] iio: max31856: provide more configuration options
` [v3 1/9] iio: max31856: add option for setting mains filter rejection frequency
` [v3 2/9] Documentation: ABI: document IIO in_temp_filter_notch_center_frequency file
` [v3 3/9] iio: max31856: add support for configuring the HW averaging
` [v3 4/9] RFC: iio: core: add char type for sysfs attributes
` [v3 5/9] iio: core: add thermocouple_type standard attribute
` [v3 6/9] Documentation: ABI: document IIO thermocouple_type file
` [v3 7/9] iio: max31856: add support for runtime-configuring the thermocouple type
` [v3 8/9] RFC/RFT: iio: maxim_thermocouple: add thermocouple_type sysfs attribute
` [v3 9/9] dt-bindings: iio: maxim_thermocouple: document new 'compatible' strings
[PATCH 2/2] dt-bindings: iio: adc: ad7292: fix constraint over channel quantity
2019-11-23 12:27 UTC (3+ messages)
[PATCH 1/2] dt-bindings: iio: adc: ad7292: Update SPDX identifier
2019-11-23 12:25 UTC (3+ messages)
[PATCH v2 00/11] iio: imu: adis: cleanup lock usage
2019-11-23 12:21 UTC (13+ messages)
` [PATCH v2 01/11] iio: imu: adis: rename txrx_lock -> state_lock
` [PATCH v2 02/11] iio: imu: adis: add unlocked read/write function versions
` [PATCH v2 03/11] iio: imu: adis[16480]: group RW into a single lock in adis_enable_irq()
` [PATCH v2 04/11] iio: imu: adis: create an unlocked version of adis_check_status()
` [PATCH v2 05/11] iio: imu: adis: create an unlocked version of adis_reset()
` [PATCH v2 06/11] iio: imu: adis: protect initial startup routine with state lock
` [PATCH v2 07/11] iio: imu: adis: group single conversion under a single "
` [PATCH v2 08/11] iio: imu: adis16400: rework locks using ADIS library's "
` [PATCH v2 09/11] iio: gyro: adis16136: "
` [PATCH v2 10/11] iio: imu: adis16480: use state lock for filter freq set
` [PATCH v2 11/11] iio: gyro: adis16260: replace mlock with ADIS lib's state_lock
Zdravstvujte! Vas interesujut bazy dannyh dlja prodazhi Vashih tovarov i uslug?
2019-11-22 18:53 UTC
[PATCH v5 00/18] cros_ec: Add sensorhub driver and FIFO processing
2019-11-22 11:35 UTC (11+ messages)
` [PATCH v5 02/18] platform: cros_ec: Add cros_ec_sensor_hub driver
` [PATCH v5 09/18] platform: chrome: sensorhub: Add FIFO support
` [PATCH v5 13/18] iio: expose iio_device_set_clock
` [PATCH v5 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
[PATCH v2] dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
2019-11-20 18:09 UTC (2+ messages)
[PATCH] iio: Fix Kconfig indentation
2019-11-20 13:41 UTC
[PATCH 1/3] iio: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
2019-11-18 17:49 UTC (3+ messages)
` [PATCH 2/3] dt-binding: iio: Add documentation for ADM1177
[PATCH v3 0/3] Use void pointers instead of char in I2C transfer APIs
2019-11-18 8:47 UTC (7+ messages)
` [PATCH v3 1/3] i2c: use void pointers for supplying data for reads and writes
` [PATCH v3 3/3] i2c: smbus: switch from loops to memcpy
[PATCH v3 0/4] iio: add driver for ping))) and laserping sensors
2019-11-18 7:35 UTC
[PATCH -next] iio: st_accel: Fix unused variable warning
2019-11-18 1:41 UTC (4+ messages)
` [PATCH v2 "
[PATCH] iio: adc: max9611: Make enum relations more future proof
2019-11-16 17:32 UTC (5+ messages)
[PATCH 0/2] Add MPU9150 magnetometer support
2019-11-16 17:20 UTC (5+ messages)
` [PATCH 1/2] iio: imu: inv_mpu6050: delete not existing MPU9150 spi support
` [PATCH 2/2] iio: imu: inv_mpu6050: add support of MPU9150 magnetometer
[PATCH v5 1/4] iio: adc: Add support for AD7091R5 ADC
2019-11-16 17:11 UTC (8+ messages)
` [PATCH v5 2/4] iio: adc: ad7091r5: Add scale and external VREF support
` [PATCH v5 3/4] dt-binding: iio: Add documentation for AD7091R5
` [PATCH v5 4/4] MAINTAINERS: add entry for AD7091R5 driver
[PATCH v2 3/4] iio: ping: add parallax ping sensors
2019-11-16 16:34 UTC (2+ messages)
[PATCH] iio: adc: ad7124: Enable internal reference
2019-11-16 16:26 UTC (2+ messages)
[PATCH] iio: buffer-dmaengine: Use dma_request_chan() directly for channel request
2019-11-16 16:22 UTC (3+ messages)
[PATCH v2 0/3] iio: adc: add support for ltc2496
2019-11-16 16:09 UTC (7+ messages)
` [PATCH v2 2/3] iio: adc: ltc2497: split protocol independent part in a separate module
` [PATCH v2 3/3] iio: adc: new driver to support Linear technology's ltc2496
[PATCH 1/3] iio: adc: ltc2496: provide device tree binding document
2019-11-16 15:25 UTC (5+ messages)
[PATCH v4 0/2] iio: adc: Add support for AD7292
2019-11-16 15:22 UTC (6+ messages)
` [PATCH v4 1/2] dt-bindings: iio: adc: Add dt-schema "
[PATCH] iio: temperature: ltc2983: fix u32 read into a unsigned long long
2019-11-16 15:15 UTC (4+ messages)
[PATCH 1/3] dt-bindings: iio: adc: add support for AD5940
2019-11-16 14:17 UTC (11+ messages)
` [PATCH 2/3] iio: adc: add driver "
[PATCH v4 00/17] cros_ec: Add sensorhub driver and FIFO processing
2019-11-16 11:49 UTC (5+ messages)
` [PATCH v4 01/17] mfd: cros_ec: Add sensor_count and make check_features public
[PATCH v2 2/4] dt-bindings: add parallax ping sensors
2019-11-15 15:00 UTC (2+ messages)
[PATCH v4 1/4] iio: adc: Add support for AD7091R5 ADC
2019-11-15 13:03 UTC (3+ messages)
` [PATCH v4 2/4] iio: adc: ad7091r5: Add scale and external VREF support
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).