From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>,
linux-iio@vger.kernel.org, mario.tesi@st.com
Subject: Re: [PATCH] iio: imu: st_lsm6dsx: explicitly define odr table size
Date: Sat, 12 Oct 2019 11:50:15 +0200 [thread overview]
Message-ID: <CAJ0CqmVo99-N_sW7xi2PmF9YwydDop_NWwpiQRMOY8XU59K6KQ@mail.gmail.com> (raw)
In-Reply-To: <20191012104709.7bfc4386@archlinux>
>
> On Mon, 7 Oct 2019 22:31:49 +0200
> Lorenzo Bianconi <lorenzo@kernel.org> wrote:
>
> > Introduce odr_len in st_lsm6dsx_odr_table_entry data structure in order
> > to explicitly define odr table size and support devices with different
> > odr table map
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> Hi Lorenzo,
>
> Patch is fine, but please put it as a precursor in whatever series you have
> coming that needs to support a different size.
>
> Thanks,
>
> Jonathan
Hi Jonathan,
ack, will do :)
Regards,
Lorenzo
>
> > ---
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 +++++++++++++++-----
> > 2 files changed, 22 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > index 30fd274ea8ae..ff7519475478 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > @@ -111,7 +111,9 @@ struct st_lsm6dsx_odr {
> > #define ST_LSM6DSX_ODR_LIST_SIZE 6
> > struct st_lsm6dsx_odr_table_entry {
> > struct st_lsm6dsx_reg reg;
> > +
> > struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE];
> > + int odr_len;
> > };
> >
> > struct st_lsm6dsx_fs {
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index 740912bbf941..98a1fa8d1454 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -131,6 +131,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 238, 0x04 },
> > .odr_avl[4] = { 476, 0x05 },
> > .odr_avl[5] = { 952, 0x06 },
> > + .odr_len = 6,
> > },
> > [ST_LSM6DSX_ID_GYRO] = {
> > .reg = {
> > @@ -143,6 +144,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 238, 0x04 },
> > .odr_avl[4] = { 476, 0x05 },
> > .odr_avl[5] = { 952, 0x06 },
> > + .odr_len = 6,
> > },
> > },
> > .fs_table = {
> > @@ -230,6 +232,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > [ST_LSM6DSX_ID_GYRO] = {
> > .reg = {
> > @@ -242,6 +245,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > },
> > .fs_table = {
> > @@ -394,6 +398,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > [ST_LSM6DSX_ID_GYRO] = {
> > .reg = {
> > @@ -406,6 +411,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > },
> > .fs_table = {
> > @@ -567,6 +573,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > [ST_LSM6DSX_ID_GYRO] = {
> > .reg = {
> > @@ -579,6 +586,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > },
> > .fs_table = {
> > @@ -738,6 +746,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > [ST_LSM6DSX_ID_GYRO] = {
> > .reg = {
> > @@ -750,6 +759,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > },
> > .fs_table = {
> > @@ -928,6 +938,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > [ST_LSM6DSX_ID_GYRO] = {
> > .reg = {
> > @@ -940,6 +951,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > },
> > .fs_table = {
> > @@ -1095,6 +1107,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > [ST_LSM6DSX_ID_GYRO] = {
> > .reg = {
> > @@ -1107,6 +1120,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .odr_avl[3] = { 104, 0x04 },
> > .odr_avl[4] = { 208, 0x05 },
> > .odr_avl[5] = { 416, 0x06 },
> > + .odr_len = 6,
> > },
> > },
> > .fs_table = {
> > @@ -1329,7 +1343,7 @@ int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val)
> > int i;
> >
> > odr_table = &sensor->hw->settings->odr_table[sensor->id];
> > - for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
> > + for (i = 0; i < odr_table->odr_len; i++)
> > /*
> > * ext devices can run at different odr respect to
> > * accel sensor
> > @@ -1337,7 +1351,7 @@ int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val)
> > if (odr_table->odr_avl[i].hz >= odr)
> > break;
> >
> > - if (i == ST_LSM6DSX_ODR_LIST_SIZE)
> > + if (i == odr_table->odr_len)
> > return -EINVAL;
> >
> > *val = odr_table->odr_avl[i].val;
> > @@ -1688,13 +1702,13 @@ st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev,
> > char *buf)
> > {
> > struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
> > - enum st_lsm6dsx_sensor_id id = sensor->id;
> > - struct st_lsm6dsx_hw *hw = sensor->hw;
> > + const struct st_lsm6dsx_odr_table_entry *odr_table;
> > int i, len = 0;
> >
> > - for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
> > + odr_table = &sensor->hw->settings->odr_table[sensor->id];
> > + for (i = 0; i < odr_table->odr_len; i++)
> > len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
> > - hw->settings->odr_table[id].odr_avl[i].hz);
> > + odr_table->odr_avl[i].hz);
> > buf[len - 1] = '\n';
> >
> > return len;
>
prev parent reply other threads:[~2019-10-12 9:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-07 20:31 [PATCH] iio: imu: st_lsm6dsx: explicitly define odr table size Lorenzo Bianconi
2019-10-12 9:47 ` Jonathan Cameron
2019-10-12 9:50 ` Lorenzo Bianconi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJ0CqmVo99-N_sW7xi2PmF9YwydDop_NWwpiQRMOY8XU59K6KQ@mail.gmail.com \
--to=lorenzo.bianconi@redhat.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=mario.tesi@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).