linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ardelean, Alexandru" <alexandru.Ardelean@analog.com>
To: "jic23@kernel.org" <jic23@kernel.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
	"lars@metafoo.de" <lars@metafoo.de>
Subject: Re: [RFC PATCH 09/14] iio: buffer: split buffer sysfs creation to take buffer as primary arg
Date: Mon, 25 May 2020 07:28:18 +0000	[thread overview]
Message-ID: <cfcc097a2cf6582cc8a5cc47d9ea8b868eda0ed9.camel@analog.com> (raw)
In-Reply-To: <20200524174916.2ff91965@archlinux>

On Sun, 2020-05-24 at 17:49 +0100, Jonathan Cameron wrote:
> [External]
> 
> On Fri, 8 May 2020 16:53:43 +0300
> Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> 
> > Currently the iio_buffer_{alloc,free}_sysfs_and_mask() take 'indio_dev' as
> > primary argument. This change converts to take an IIO buffer as a primary
> > argument.
> > 
> > That will allow the functions to get called for multiple buffers.
> > 
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> 
> Looks good to me.  We'll need this whatever the interface ends up being as
> need the separate control infrastructure.

I was wanting to split this into it's own patch at some point and send it now.
I'll probably do it.

> 
> Jonathan
> 
> > ---
> >  drivers/iio/industrialio-buffer.c | 46 ++++++++++++++++++++-----------
> >  1 file changed, 30 insertions(+), 16 deletions(-)
> > 
> > diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-
> > buffer.c
> > index e7a847e7b103..6b1b5d5387bd 100644
> > --- a/drivers/iio/industrialio-buffer.c
> > +++ b/drivers/iio/industrialio-buffer.c
> > @@ -1312,26 +1312,14 @@ static struct attribute *iio_buffer_attrs[] = {
> >  	&dev_attr_data_available.attr,
> >  };
> >  
> > -int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
> > +static int __iio_buffer_alloc_sysfs_and_mask(struct iio_buffer *buffer)
> >  {
> > +	struct iio_dev *indio_dev = buffer->indio_dev;
> >  	struct iio_dev_attr *p;
> >  	struct attribute **attr;
> > -	struct iio_buffer *buffer = indio_dev->buffer;
> >  	int ret, i, attrn, attrcount, attrcount_orig = 0;
> >  	const struct iio_chan_spec *channels;
> >  
> > -	channels = indio_dev->channels;
> > -	if (channels) {
> > -		int ml = indio_dev->masklength;
> > -
> > -		for (i = 0; i < indio_dev->num_channels; i++)
> > -			ml = max(ml, channels[i].scan_index + 1);
> > -		indio_dev->masklength = ml;
> > -	}
> > -
> > -	if (!buffer)
> > -		return 0;
> > -
> >  	attrcount = 0;
> >  	if (buffer->attrs) {
> >  		while (buffer->attrs[attrcount] != NULL)
> > @@ -1411,19 +1399,45 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev
> > *indio_dev)
> >  	return ret;
> >  }
> >  
> > -void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev)
> > +int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
> >  {
> >  	struct iio_buffer *buffer = indio_dev->buffer;
> > +	const struct iio_chan_spec *channels;
> > +	int i;
> > +
> > +	channels = indio_dev->channels;
> > +	if (channels) {
> > +		int ml = indio_dev->masklength;
> > +
> > +		for (i = 0; i < indio_dev->num_channels; i++)
> > +			ml = max(ml, channels[i].scan_index + 1);
> > +		indio_dev->masklength = ml;
> > +	}
> >  
> >  	if (!buffer)
> > -		return;
> > +		return 0;
> > +
> > +	return __iio_buffer_alloc_sysfs_and_mask(buffer);
> > +}
> >  
> > +static void __iio_buffer_free_sysfs_and_mask(struct iio_buffer *buffer)
> > +{
> >  	iio_buffer_free_scanmask(buffer);
> >  	kfree(buffer->buffer_group.attrs);
> >  	kfree(buffer->scan_el_group.attrs);
> >  	iio_free_chan_devattr_list(&buffer->scan_el_dev_attr_list);
> >  }
> >  
> > +void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev)
> > +{
> > +	struct iio_buffer *buffer = indio_dev->buffer;
> > +
> > +	if (!buffer)
> > +		return;
> > +
> > +	__iio_buffer_free_sysfs_and_mask(buffer);
> > +}
> > +
> >  static const struct file_operations iio_buffer_fileops = {
> >  	.read = iio_buffer_read_outer,
> >  	.release = iio_buffer_chrdev_release,

  reply	other threads:[~2020-05-25  7:28 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-08 13:53 [RFC PATCH 00/14] iio: buffer: add support for multiple buffers Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 01/14] iio: Move scan mask management to the core Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 02/14] iio: hw_consumer: use new scanmask functions Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 03/14] iio: buffer: add back-ref from iio_buffer to iio_dev Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 04/14] iio: core,buffer: wrap iio_buffer_put() call into iio_buffers_put() Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 05/14] iio: core: register chardev only if needed Alexandru Ardelean
2020-05-24 16:40   ` Jonathan Cameron
2020-05-08 13:53 ` [RFC PATCH 06/14] iio: buffer,event: duplicate chardev creation for buffers & events Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 07/14] iio: core: add simple centralized mechanism for ioctl() handlers Alexandru Ardelean
2020-05-24 16:45   ` Jonathan Cameron
2020-05-25  7:24     ` Ardelean, Alexandru
2020-05-08 13:53 ` [RFC PATCH 08/14] iio: core: use new common ioctl() mechanism Alexandru Ardelean
2020-05-24 16:47   ` Jonathan Cameron
2020-05-25  7:27     ` Ardelean, Alexandru
2020-05-31 15:20       ` Jonathan Cameron
2020-05-08 13:53 ` [RFC PATCH 09/14] iio: buffer: split buffer sysfs creation to take buffer as primary arg Alexandru Ardelean
2020-05-24 16:49   ` Jonathan Cameron
2020-05-25  7:28     ` Ardelean, Alexandru [this message]
2020-05-31 15:21       ` Jonathan Cameron
2020-05-08 13:53 ` [RFC PATCH 10/14] iio: buffer: remove attrcount_orig var from sysfs creation Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 11/14] iio: buffer: add underlying device object and convert buffers to devices Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 12/14] iio: buffer: symlink the scan_elements dir back into IIO device's dir Alexandru Ardelean
2020-05-08 13:53 ` [RFC PATCH 13/14] iio: unpack all iio buffer attributes correctly Alexandru Ardelean
2020-05-24 17:28   ` Jonathan Cameron
2020-05-08 13:53 ` [RFC PATCH 14/14] iio: buffer: convert single buffer to list of buffers Alexandru Ardelean
2020-05-09  8:52 ` [RFC PATCH 00/14] iio: buffer: add support for multiple buffers Lars-Peter Clausen
2020-05-10 10:09   ` Jonathan Cameron
2020-05-11 10:33     ` Ardelean, Alexandru
2020-05-11 10:37       ` Lars-Peter Clausen
2020-05-11 13:03         ` Ardelean, Alexandru
2020-05-11 13:24           ` Ardelean, Alexandru
2020-05-11 13:58             ` Lars-Peter Clausen
2020-05-11 14:56               ` Ardelean, Alexandru
2020-05-11 19:56                 ` Lars-Peter Clausen
2020-05-12  6:26                   ` Ardelean, Alexandru
2020-05-16 13:08                     ` Ardelean, Alexandru
2020-05-16 16:24                       ` Jonathan Cameron
2020-05-17  6:26                         ` Ardelean, Alexandru
2020-05-17 13:40                           ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cfcc097a2cf6582cc8a5cc47d9ea8b868eda0ed9.camel@analog.com \
    --to=alexandru.ardelean@analog.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).