* [PATCH] Input: ADP5588: add support for ADP5587 devices
@ 2010-01-19 4:52 Mike Frysinger
2010-01-19 8:27 ` Dmitry Torokhov
0 siblings, 1 reply; 2+ messages in thread
From: Mike Frysinger @ 2010-01-19 4:52 UTC (permalink / raw)
To: linux-input, Dmitry Torokhov; +Cc: uclinux-dist-devel, Michael Hennerich
From: Michael Hennerich <michael.hennerich@analog.com>
The ADP5587 is quite similar to the ADP5588 but features a greater I/O
voltage range and lacks the Dual Light Sensor Interface. This new part
is also supported by this driver.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
drivers/input/keyboard/Kconfig | 4 ++--
drivers/input/keyboard/adp5588-keys.c | 6 ++++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 02c836e..c72283c 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -35,10 +35,10 @@ config KEYBOARD_ADP5520
be called adp5520-keys.
config KEYBOARD_ADP5588
- tristate "ADP5588 I2C QWERTY Keypad and IO Expander"
+ tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
depends on I2C
help
- Say Y here if you want to use a ADP5588 attached to your
+ Say Y here if you want to use a ADP5588/87 attached to your
system I2C bus.
To compile this driver as a module, choose M here: the
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 1edb596..b5142d2 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -1,6 +1,7 @@
/*
* File: drivers/input/keyboard/adp5588_keys.c
- * Description: keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander
+ * Description: keypad driver for ADP5588 and ADP5587
+ * I2C QWERTY Keypad and IO Expander
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2008-2009 Analog Devices Inc.
@@ -327,6 +328,7 @@ static const struct dev_pm_ops adp5588_dev_pm_ops = {
static const struct i2c_device_id adp5588_id[] = {
{ KBUILD_MODNAME, 0 },
+ { "adp5587-keys", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adp5588_id);
@@ -357,5 +359,5 @@ module_exit(adp5588_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("ADP5588 Keypad driver");
+MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
MODULE_ALIAS("platform:adp5588-keys");
--
1.6.6
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] Input: ADP5588: add support for ADP5587 devices
2010-01-19 4:52 [PATCH] Input: ADP5588: add support for ADP5587 devices Mike Frysinger
@ 2010-01-19 8:27 ` Dmitry Torokhov
0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Torokhov @ 2010-01-19 8:27 UTC (permalink / raw)
To: Mike Frysinger; +Cc: linux-input, uclinux-dist-devel, Michael Hennerich
On Mon, Jan 18, 2010 at 11:52:52PM -0500, Mike Frysinger wrote:
> From: Michael Hennerich <michael.hennerich@analog.com>
>
> The ADP5587 is quite similar to the ADP5588 but features a greater I/O
> voltage range and lacks the Dual Light Sensor Interface. This new part
> is also supported by this driver.
Will apply, thank you.
--
Dmitry
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-01-19 8:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-01-19 4:52 [PATCH] Input: ADP5588: add support for ADP5587 devices Mike Frysinger
2010-01-19 8:27 ` Dmitry Torokhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).