Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: robh+dt@kernel.org, andriy.shevchenko@linux.intel.com,
	bparrot@ti.com, andy.shevchenko@gmail.com,
	simon.budig@kernelconcepts.de, hdegoede@redhat.com,
	fcooper@ti.com, mripard@kernel.org,
	alexandre.belloni@bootlin.com, shawnguo@kernel.org,
	devicetree@vger.kernel.org, kernel@pengutronix.de,
	linux-input@vger.kernel.org
Subject: Re: [PATCH v2 4/5] Input: edt-ft5x06 - make wakeup-source switchable
Date: Mon, 2 Dec 2019 10:00:57 -0800
Message-ID: <20191202180057.GC50317@dtor-ws> (raw)
In-Reply-To: <20191127120948.22251-5-m.felsch@pengutronix.de>

On Wed, Nov 27, 2019 at 01:09:47PM +0100, Marco Felsch wrote:
> Since day one the touch controller acts as wakeup-source. This seems to
> be wrong since the device supports deep-sleep mechanism [1] which
> requires a reset to leave it. Also some designs won't use the
> touchscreen as wakeup-source.
> 
> According discussion [2] we decided to break backward compatibility and
> go the common way by using the 'wakeup-source' device-property.
> 
> [1] https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x26.pdf
> [2] https://patchwork.kernel.org/patch/11149037/
> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> v2:
> - make use of common wakeup-source property
> - adapt commit message
> 
>  drivers/input/touchscreen/edt-ft5x06.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index e1b31fd525e2..8d2ec7947f0e 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -24,6 +24,7 @@
>  #include <linux/irq.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> +#include <linux/property.h>
>  #include <linux/ratelimit.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
> @@ -1056,6 +1057,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  	unsigned long irq_flags;
>  	int error;
>  	char fw_version[EDT_NAME_LEN];
> +	bool en_wakeup;
>  
>  	dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n");
>  
> @@ -1114,6 +1116,8 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  		return error;
>  	}
>  
> +	en_wakeup = device_property_present(&client->dev, "wakeup-source");
> +
>  	if (tsdata->wake_gpio) {
>  		usleep_range(5000, 6000);
>  		gpiod_set_value_cansleep(tsdata->wake_gpio, 1);
> @@ -1208,7 +1212,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  		return error;
>  
>  	edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
> -	device_init_wakeup(&client->dev, 1);
> +	device_init_wakeup(&client->dev, en_wakeup);

I2C core already marks device as wakeup source if I2C_CLIEMT_WAKE is set
(and the flag is specified when, among other things, device has
"wakeup-source" property).

So the only thing that is needed is to remove

	device_init_wakeup(&client->dev, 1);

line.

Thanks.

-- 
Dmitry

  reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-27 12:09 [PATCH v2 0/5] EDT-FT5x06 improvements Marco Felsch
2019-11-27 12:09 ` [PATCH v2 1/5] Input: edt-ft5x06: work around first register access error Marco Felsch
2019-12-02 17:58   ` Dmitry Torokhov
2019-12-03  8:15     ` Marco Felsch
2019-11-27 12:09 ` [PATCH v2 2/5] Input: edt-ft5x06 - alphabetical include reorder Marco Felsch
2019-11-27 12:09 ` [PATCH v2 3/5] dt-bindings: Input: edt-ft5x06 - document wakeup-source capability Marco Felsch
2019-12-05 21:15   ` Rob Herring
2019-11-27 12:09 ` [PATCH v2 4/5] Input: edt-ft5x06 - make wakeup-source switchable Marco Felsch
2019-12-02 18:00   ` Dmitry Torokhov [this message]
2019-12-10  8:36     ` Marco Felsch
2019-11-27 12:09 ` [PATCH v2 5/5] Input: edt-ft5x06 - improve power management operations Marco Felsch
2019-11-27 12:59   ` Andy Shevchenko
2019-11-27 13:06     ` Marco Felsch
2019-11-27 14:32       ` Andy Shevchenko
2019-11-27 17:25         ` Marco Felsch
2019-11-27 18:06           ` Andy Shevchenko
2019-12-02 18:04   ` Dmitry Torokhov
2019-12-10  8:43     ` Marco Felsch
2019-11-27 17:10 ` [PATCH v2 0/5] EDT-FT5x06 improvements Andy Shevchenko
2019-11-27 17:14 ` Andy Shevchenko
2019-11-27 17:25   ` Marco Felsch

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191202180057.GC50317@dtor-ws \
    --to=dmitry.torokhov@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=bparrot@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fcooper@ti.com \
    --cc=hdegoede@redhat.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-input@vger.kernel.org \
    --cc=m.felsch@pengutronix.de \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=simon.budig@kernelconcepts.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git