From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Ahmet Inan <inan@distec.de>,
Martin Fuzzey <martin.fuzzey@flowbird.group>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@collabora.com,
Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCHv2 0/5] EXC3000 Updates
Date: Tue, 19 May 2020 20:24:42 +0200 [thread overview]
Message-ID: <20200519182447.73405-1-sebastian.reichel@collabora.com> (raw)
Hi,
This is (a much delayed, sorry!) PATCHv2 of the EXC80Hxx support
patchset. Here is the changelog since [PATCHv1]:
- prepend new patch converting binding document to YAML
- prepend new patch switching to I2C probe_new
- append new patch adding reset-gpio support
- use explicit compatible values for the touchscreen chips instead of
a wildcast. Since the documentation, that I have is very vague let's
use different values for exc80h60 and exc80h84. This avoids wildcard
DT entries and means we are prepared when noticing differences
between the chips.
- add accidently removed terminator entry in exc3000_id
- use device structure with max_xy and name (suggested by Martin)
- use SZ_4K, SZ_16K defines (suggested by Dmitry)
- harden event check, so that MT1 and MT2 based chips only allow
their own event type.
- write more detailed commit description in the fw_version/model
sysfs patch to explain why the values are not cached and why
the simpler read(); sleep(); write() approach has not been used
- use DEVICE_ATTR_RO() in fw_version/model patch to improve readability
- fw_version/model: replace memcpy + null termination with strlcpy
- fw_version/model: increase buffer size for weird firmware versions
- fw_version/model: use sizeof() instead of hardcoded buffer sizes
- simplify exc3000_query_interrupt() by moving the complete() call to
the exc3000_interrupt().
I think I only ignored one review feedback, that the fw_version and
model sysfs nodes are attached to the input device instead of the
i2c device. This was done to avoid being racy:
http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/
Properties look like this after applying the patchset:
$ cat /sys/class/input/input1/{name,fw_version,model}
EETI EXC80H60 Touch Screen
00_T6
Orion_1320
Thanks in advance for looking at the patches,
-- Sebastian
[PATCHv1] https://lore.kernel.org/linux-input/20191107181010.17211-1-sebastian.reichel@collabora.com/
Sebastian Reichel (5):
dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to
json-schema
Input: EXC3000: switch to i2c's probe_new API
Input: EXC3000: add EXC80H60 and EXC80H84 support
Input: EXC3000: Add support to query model and fw_version
Input: EXC3000: Add reset gpio support
.../bindings/input/touchscreen/exc3000.txt | 26 --
.../bindings/input/touchscreen/exc3000.yaml | 58 +++++
drivers/input/touchscreen/exc3000.c | 243 ++++++++++++++++--
3 files changed, 281 insertions(+), 46 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
--
2.26.2
next reply other threads:[~2020-05-19 18:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-19 18:24 Sebastian Reichel [this message]
2020-05-19 18:24 ` [PATCHv2 1/5] dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Sebastian Reichel
2020-05-19 20:38 ` Enric Balletbo i Serra
2020-05-19 18:24 ` [PATCHv2 2/5] Input: EXC3000: switch to i2c's probe_new API Sebastian Reichel
2020-05-19 18:24 ` [PATCHv2 3/5] Input: EXC3000: add EXC80H60 and EXC80H84 support Sebastian Reichel
2020-05-19 23:52 ` kbuild test robot
2020-05-19 18:24 ` [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version Sebastian Reichel
2020-05-19 21:12 ` Enric Balletbo i Serra
2020-05-19 21:31 ` Sebastian Reichel
2020-05-20 4:38 ` kbuild test robot
2020-05-19 18:24 ` [PATCHv2 5/5] Input: EXC3000: Add reset gpio support Sebastian Reichel
2020-05-19 20:57 ` Enric Balletbo i Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200519182447.73405-1-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=dmitry.torokhov@gmail.com \
--cc=inan@distec.de \
--cc=kernel@collabora.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.fuzzey@flowbird.group \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).