Linux Input Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/4] Add support for vibrator motor for TBS A711 Tablet
@ 2020-07-14 10:22 Ondrej Jirman
  2020-07-14 10:23 ` [PATCH v4 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios Ondrej Jirman
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Ondrej Jirman @ 2020-07-14 10:22 UTC (permalink / raw)
  To: linux-sunxi, Dmitry Torokhov, Rob Herring, Mark Rutland,
	Maxime Ripard, Chen-Yu Tsai
  Cc: Ondrej Jirman, Luca Weiss, Tomas Novotny, linux-input,
	devicetree, linux-kernel, linux-arm-kernel

The tablet has a vibrator motor. This patch series exposes it via
input subsystem (EV_FF).

I'd like to ask input maintainers to take the patches 1 and 2.
Patches 3 and 4 should go via the sunxi tree.

The change to the vibrator driver is meant to enable toggling the
vibrator motor just via a power supply itself. There's not additional
gpio driven switch on this tablet between the power supply for the
motor and the motor.

Please take a look.

Changes in v4:
- Added DT reviewed-by tag
- Fixed motor typo

Changes in v3:
- Changed dt-binding to require at least one of enable/supply, dropped ack
- Changed driver to bail out if neither supply nor gpio is given

Changes in v2:
- Added DT ack tag
- Add more information to the commit log (re use of LDO for the power)


thank you and regards,
  Ondrej Jirman

Ondrej Jirman (4):
  dt-bindings: input: gpio-vibrator: Don't require enable-gpios
  input: gpio-vibra: Allow to use vcc-supply alone to control the
    vibrator
  ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor
  ARM: dts: sun8i-a83t-tbs-a711: Increase voltage on the vibrator

 .../devicetree/bindings/input/gpio-vibrator.yaml   |  7 ++++++-
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts          |  9 +++++++--
 drivers/input/misc/gpio-vibra.c                    | 14 ++++++++++----
 3 files changed, 23 insertions(+), 7 deletions(-)

-- 
2.27.0


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-14 10:22 [PATCH v4 0/4] Add support for vibrator motor for TBS A711 Tablet Ondrej Jirman
2020-07-14 10:23 ` [PATCH v4 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios Ondrej Jirman
2020-07-14 10:23 ` [PATCH v4 2/4] input: gpio-vibra: Allow to use vcc-supply alone to control the vibrator Ondrej Jirman
2020-07-30  6:19   ` Dmitry Torokhov
2020-07-30  9:18     ` Ondřej Jirman
2020-07-14 10:23 ` [PATCH v4 3/4] ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor Ondrej Jirman
2020-07-14 10:23 ` [PATCH v4 4/4] ARM: dts: sun8i-a83t-tbs-a711: Increase voltage on the vibrator Ondrej Jirman

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git